Font error in display

Hi,
I have some troubles with using a font in my keynote presentation. I'd like to add some greek letters, and in Font book I saw that Symbol is the right font to use, but when I change the font in keynote to Symbol, I get normal letters. How can I solve this?
Thanks in advance
Baloekiki

Cracked it! Thanks dook. With a bit of fiddling around (I'm not wholly sure how, now) I went back into the Character palette which was showing Webdings. Clicked (I think) View All Characters > by Category >Punctuation> Symbols & found Musical Symbols, highlighted the flat symbol & clicked the Insert button. Voila!
For the two earlier posters, there are European scripts, Arrows (I've been wanting some of them), geometrical shapes & all sorts in the special characters if you lurk around. I thought I had done that last night but dook's suggestion made me delve deeper. I'm always worried to click anything I don't know about incase I lose something vital or cannot get back to where I started!
To save all that hassle in future I will probably keep what I want on a page & copy & paste them as I need.
What would I do without these discussions pages?
Again, many thanks for your help dook. As I didn't post the original question I don't think I can mark it as answered but as far as I am concerned you've answered it for me.
Carol.
Wippitwalker.
Message was edited by: Wippitwalker

Similar Messages

  • Din font won't display in pdf file since December update to version 11.0.10

    I upgraded my Acrobat to version 11.0.10 just before the Christmas break. Din font is my corporate typeface and I used it yesterday to create an invoice in Mac Pages only to discover that I cannot view the pdf as the font won't display in Acrobat. And to add to the problem my clients who are using the same version of Acrobat are unable to view the font either on the pdf. It all worked fine before the upgrade.
    What can be done to rectify the problem? I need to fix this asap.
    This error message appears when I try and open the file "Cannot extract the embedded font 'DQPJNL+DIN-Medium'. S"
    The DQPJNL bit changes depending on the file being opened but essential Din font won't display.

    Hi,
    Please check if DIN font is embedded in your PDF by going to File > Properties > Fonts
    If no, then you might need to go to 'Tools > Print Production > Preflight'
    Then, open the PDF fixups section, click on Embed fonts fixup and choose 'Analyze and fix button'.
    Please check and let me know if you are able to view the font now.
    Regards,
    Anubha

  • Embedded font error message

    PDF file in Telugu language will open on computer but the same PDF file will not open from a  web site. Error message about embedded fonts that only displays numbers or English words. The web link is www.labiblefacon.com file is under Message of reconciliation any suggestions?

    Thanks for your reply
    Google search finds the site but Yahoo displays what appears to be French.
    I failed to provide the complete link information. It should be
    http://www.labiblefacon.com. After selected from browser listing, on the
    left side box click on The Message of Reconciliation and when opened
    click on lesson 2. ఆది మానవుడు
    <http://www.labiblefacon.com/PDF/MOR/2.%20Ealry_Man-Telugu2.pdf>, this
    is a PDF file
    Only a few pages are available as the site is in the process of being
    translated
    The page appears to have been written in the Gautami font which is one
    of the fonts on MS Word. Adobe reader shows 4 pages but very little is
    displayed mainly periods, commas and numbers. To me this implies Adobe
    does not recognize the Gautami font.
    Randolph

  • Error when displaying xellerate form

    Hello,
    I have the following error when displaying the form of any xellerate users :
    ERROR,03 May 2011 10:40:56,273,[XELLERATE.APIS],Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-19'
    All is working fine, just this error that is diplayed each time I want to display a user form. In my formMetadata.xml, I have the following definition for the field -19, it is the manager :
    <Attribute name="-19" label="global.label.managerid" displayComponentType="LookupField" variantType="long" dataLength="50" map="Users.Manager Login">
    <ValidValues lookupColumnNames="User ID,Last Name,First Name" lookupQuery="SELECT usr.usr_key,usr.usr_last_name,usr.usr_first_name,usr.usr_login FROM usr, ugp, usg WHERE ugp.ugp_name = 'PROF_MANAGER' AND ugp.ugp_key = usg.ugp_key AND usr.usr_key = usg.usr_key AND usr.usr_status = 'Active' AND usr.usr_emp_type = 'Employee'" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
    </Attribute>
    What is the problem with my attribute definition ?
    Thanks for your help,
    Kind regards,
    mdadikn

    Hello,
    I'm new to OIM. I am a new hire to a group that had a contractor setup the whole system. I'm finding a similar issue on our system here. I've looked through the database and cannot seem to find the issue. Error happens when from the webapp clicking on "Create IT Resource".
    From the Error Log:
    Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-82'
    Line with issue from FormMetaData.xml:
         <Attribute name="-82" label="global.label.itresourcetype" displayComponentType="LookupField" variantType="String" dataLength="255" map="IT Resources Type Definition.Server Type" useInRule="true">
              <ValidValues lookupQuery="select svd_svr_type from svd" selectionColumn="svd_svr_type"/>
    </Attribute>
    Please let me know any additional information/questions. From what I can tell everything should be correct. Sorry again if the answer is obvious, I'm only 3 days into OIM.
    Thank you,
    Ryan

  • Error in displaying report

    I am geting the following error while displaying report-
    <b>Internal error (-101) occured [Message 131-183]</b>
    The reports are geting displayed on other pcs but not on my pc.I tried unistalling and re-installing sap but the error was not solved.

    Daan,
           The printer was not installed on my pc.After installing printer, the reports are visible.Thanks for u r help.
                                                                                    Regards,
                                                                                    Dilip Kumbhar

  • Error while displaying report

    I am getting following error while displaying report in sap business one-
    <b>Internal error (-101) occured [Message 131-183]</b>
    I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.

    Hi Yogesh,
           I haven't installed any patch on my client machine.
                                                                                    Regards,
                                                                                    Dilip Kumbhar

  • Huey Pro calibrator- error message  display measurement Error

    i am using this huey pro calibration.. it had been a year without problem... but now i am trying to calibrate my apple cinema display LCD 30 inch it keep saying error message- display measurement error.. and huey support never answer my e-mail. any idea? how can i fix it.. i did re install software many times but same thing happen.. so right now i can;t calibrate my monitor.. any help please

    >a nice NVidia card... Please help Adobe!
    1a - what is the model nVidia card, and what is your driver version?
    1b - for instance, I have a GTX 285 and driver 296.10
    2a - aside from the occassional Adobe employee, this is a user to user forum, not Adobe suport
    2b - how to contact Adobe...
    Adobe contact information
    http://www.adobe.com/support/contact
    In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
    In the US - Adobe Install Problems 800-642-3623
    In the US - Adobe Activation 866-772-3623 Open 24/7

  • Error not displaying while Invoice Apprvoal in detail tab

    Hi,
    Here is the problem we are facing. We are at SRM 5.0 with Extended Classic and no IMS configured.
    u2022 Activity u2013
    1. Invoice with value more than PO value is posted and triggered for approval. Zero Tolerance  maintained.
    2. Posted Invoice has status u2013 u2018To Be Corrected Manuallyu2019.
    3. Work Item triggered for approval and is in Approver's inbox.
    4. Approver approves the Invoice.
    u2022 Expected Result u2013 If Approver tries to approve the Invoice then he/she should get error message u2018Document Contains Errors Approval Not Possibleu2019.
    u2022  Actual System Behavioru2013
    1. If approver tries to approve the Invoice at header level then error message u2018Document Contains Errors -
    >Approval Not Possibleu2019 is getting populated. But we have deactivated the approval/rejection button at the header level.
    2. Approver is opening up the invoice document and then approves the Invoice. At that time, error message mentioned in point 1 is not getting populated. Instead the message appears as u2018The Invoice Approvedu2019. This is a false indication to approver and work item remains in Approveru2019s queue.
    Any solution to resolve this issue?

    Hi AP,
    Same approver when approves the Invoice at header level, error msg displayed properly. But if he tries to appove the invoice in detailed view - clicking on SAVE - then the error msg is not displayed and instead it shows Invoice Approved and workitem remains in his work list.
    Is this because of Autho issue? In that case what autho objects we need to check?
    My wild guess about this issue could be because system is not checking if the Doc is complete or not to trigger the respective message. Any thoughts?
    Thanks.

  • Error message display for PO creation with reference to internal orders

    Sir,
    While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message  when Budget is exceeded.
    But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
    Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
    Regards,
    Srinivasa Murthy

    Hi Anupam,
    The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
    This error comes during PO creation Process and PO can not be saved. This error message display is correct.
    Item 001 Order 600643 budget exceeded
    Message no. BP604
    Diagnosis
    In document item 001 Order 600643, budget  for fiscal year 2009 was exceeded by 99,960,000.00 INR.
    But  my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
    Regards,
    Srinivasa Murthy

  • ENT-06954: Error while Displaying BIBean for Cube/Dimension Dataviewer.

    Hi all,
    I have defined a cube with three dimensions. All elements are deployed and the mappings is executed successfully. If I try to open the dataviewer either for the cube or for the dimensions I receive the following errors:
    ENT-06954: Error while Displaying BIBean for Cube Dataviewer.
         at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerMain.getDataviewObject(CubeDataViewerMain.java:391)
         at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerEditor._init(CubeDataViewerEditor.java:66)
         at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
         at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
         at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
         at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
         at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
         at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
         at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
         at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    ENT-06972: Error while Displaying BIBean for Dimension Dataviewer.
         at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.getDimensionListObject(DimDataViewerMain.java:479)
         at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:89)
         at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
         at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
         at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
         at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
         at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
         at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
         at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
         at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    In another warehouse this function works properly. I am using OWB 10gR2 (10.2.0.1.31).
    Any hints to fix this issue would be appreciated.
    Thanks in Advance, C.

    If you run OWB using the supplied shell script or batch file are there other errors on the console before the exception. OWB uses a component (OLAPI does some validation over and above any other) which dumps the errors on the the standard output which often illustrates some invalid metadata in the OLAP catalog.

  • Fonts no longer display in iTunes

    After updating iTunes, fonts no longer display in iTunes and a few other places. Fix ideas?

    Back up all data.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    Start up in safe mode to rebuild the font caches. Restart as usual and test.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t start in safe mode. In that case, ask for instructions.
    If you still have problems, then from the Font Book menu bar, select
              File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • Distiller "can't find font" error with MS-Gothic and ArialUnicodeMS

    Hi. I'm tried to verify that Distiller (both 9 and XI) and PDF Generator (11.0 SP1) are able to generate PDFs from Postscript files using a variety of fonts. Almost every font that I tried works perfectly fine, but MS-Gothic and ArialUnicodeMS both fail with "can't find font" errors. I've verified font configurations in both Distiller and PDF Generator, and lots of other fonts work fine. I've also verified that the two fonts are installed, enabled, and can be used in other applications (e.g., MS Word). In fact, I can generate PDFs from MS Word documents on the same server that use both of those fonts. I suspect the errors are misleading in that those apps can find the fonts, but are unable to open or use them for some reason. I've been able to replicate this behavior both on Windows Server and Mac OS X.
    Has anyone seen behavior like this? Any suggestions on how to get more information out of these Adobe apps to get a better idea what the real error is?
    JJR

    Addirional note: This is a java class within a JavaFX application if that is relevant.
    It does seem to be relevant - if I create the same class as part of a Java application rether than a JavaFX application it compiles without error. Is the imported java.awt.GraphicsEnvironment different in the tow cases??
    Edited by: Sidereal on Aug 28, 2009 11:19 AM

  • ERROR MESSAGE : display of the query spec is not allowed

    Hi all,
    I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
    Can anyone help me in understanding this issue?
    Thanks,
    Raj.

    Have you check your authorizaiton trace with ST01?
    You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

  • Hi guys, I have a problem with my new macbook pro 15". I tried to updtate the apps (iPhoto, iMovie and Garageband), but an error was displayed "You have updates available for other accounts". I don't have other accounts!!! :(

    Hi guys,
    I have a problem, I have a new macbook pro. I updated the software without problems; then I tried to update iPhoto, iMovie and Garageband, but an error was displayed "You have updates available for other accounts". I don't have any other account, i tried everything found on the net but nothing seems to work...Please help me!!!!

    Same thing for me it writes "To update this application, sign in to the account you used to purchase it."

  • Some fonts are not displayed correctly

    We are developing an application where in the font for the whole application can be changed from a particular font dialog.the problem is that although it works fine for majority of the fonts, rectangular boxes are displayed for Impact, Marlett, Symbol, Webdings, wingdings font.
    i am doing a
    GraphicsEnvironment ge =GraphicsEnvironment.getLocalGraphicsEnvironment(); for getting the fonts and displaying it in a JList.Is there any way of suppressing these fonts from being displayed to the user ?

    Yes these fonts have one feature - see http://developer.java.sun.com/developer/bugParade/bugs/4279855.html
    so you can check them by next way :
         GraphicsEnvironment ge = GraphicsEnvironment.
    getLocalGraphicsEnvironment();
         Font[] fonts = null;
         if (ge != null) {
              fonts = ge.getAllFonts();
         for (int i=0; i < fonts.length; i++) {
              fonts.canDisplay('a');

Maybe you are looking for