Font information changed, may effect document?

When I used Print Setup to print the Book for my Structured Document, after selecting the "PDF Printer" I get a message saying "The font information for your computer has changed. This change may effect the format and output of your document". How can I consolidate the font information so it doesn't change and I'm using the same font information to design my documents?

FM also uses any available printer fonts, so switching to the AdobePDF gives you a very limited selection. Usually, the issue is with Times vs TimesNewRoman and this is effectiveely transparent.
To ensure that you dont' have this happening, it's best to always have the AdobePDF as the default printer when using FM. The Sundorne SetPrint utility (http://sundorne.com/FrameMaker/Freeware/setPrint.htm ) does this automatically for you and is highly recommended.

Similar Messages

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

FingerPrint is not listed as supported on this page: AirPrint Basics
You might check with the makers of FingerPrint.

Why does my font/text change when I switch from Classic 3D to Ray traced 3D in After Effects?

My font/text changes when I switch from Classic 3D to Ray traced 3D. Why is it doing this? Also, I cant get the font/txt to look the same after I switch from Classic to Ray traced. How can I get it to look the same?

I am pretty new to After Effects so I hope it's not my inexperience that's causing the problem. (It probably is)
I just updated to the most current version of AE.
I am on a mac pro late 2013 12GB 6 core. Running OSX 10.9.4
Okay so after looking at it a little closer, I think the color is what mostly changes. The first screenshot is the what the text look like with Classic 3D and the second screenshot is what it looks like after I change it to Ray traced 3D. Also under the "Mode" section..the pull down that says "Normal" disappears. I'm wondering why the font color is changing?

How do I change the font style in After Effects CS6?

How do I change the font style in After Effects CS6?

AE basics: Go to Window>Character or select Workspace>Text
In the timeline, select the Text Layer or in the Comp Panel, with the text tool selected and the layer selected in the timeline, highlight the text you want to change
In the Character Panel, Change the font attributes...
Take a quick look at this short video. You will learn how to find the font panel, change the paragraph style and baseline shift:
Please, since your question tells me you are very new to After Effects start here: Basic Workflow

Changing default interface font size has no effect

Just setup my shiny new iMac with 5K retina display. Images in Lightroom, of course, look stunning on the display. Problem is that all the interface elements are now displayed at a very small size. I've tried setting the font size in Preferences/Interface to "Large", but nothing changes. Any suggestions? With the increasing use of 4K and now 5K displays, I'd think being able to set a more easily readable font size for the interface elements (while still displaying images in all they retina-resolution goodness) would be an important option to have. Thanks.,

Lightroom 5 the font sizes changed to Small, Medium, Large 150% and Largest 200% (the last one is what you want for QHD displays.)
LR4 only had 3 font size choices (Auto,Small and Large) and does not support QHD/4K displays.

Changes to financial document are only visible after reassign the financial document to sales order

Hello experts,
Whenever I am changing a financial document ( say validity date) in
vx12n, I want the same to get reflected in the sales documents to which
the financial document is already attached.
Currently to make the change visible I have to reassign the financial
document in the sales document.
Reassign is not possible in the cases where part delivery already been
happened (LC fields got grayed out ).
We dont want to run sensitive T CODES like VKM3 or VKM4 due to audit
related issues .
Is there any way so that any change in financial document is
automatically captured in the related sales document.
Regards
Avik

Hi Minhaj ,
Thanks for your reply . But the same is happening @IDES also. As per as my business scenario , in the time of creating the financial document by VX11N , user does not know when the sales order is going to be delivered. By the time of delivery , validity date or some other FD fields get changed in VX12N to accommodate the requirements . When they are trying to deliver the same from the sales order , credit check is throwing error for the same fields which are already changed . Now after reassign the same , credit check is allowing to deliver . But in worst possible scenarios ,it may happens validity date of the FD get expired when part delivery is already completed . Thus make the FD fields of sales document non-modifiable . You cant reassign the same any more.
As per as your reply relating to Basis , please share some specific information so that I can communicate them effectively .
Regards
Avik

List all fonts used in the illustrator document

Hi All,
Having searched google I can't seem to find what I am after but am hoping someone here might be able to help me.
Due to a recent issue with a designer using a font that wasn't part of the brand guidelines for a particular company we would now like to list all fonts that are used in the illustrator file in a media panel on the document when it is sent for both internal and external approval.
I know that I can go to find font, save the list, open the document and then copy and paste that list in to a text box in Illustrator, however this is quite time consuming and a bit of a faff.
What I would like to know is:
1. Does such a plug in exist that will create a text box in illustrator and just list all the fonts automatically, ideally updating whenever fonts are changed?
2. If not does anyone have a script that I can run that will do the same thing and just drop a list of all fonts currently live in the document in to a text box?
I will have the same issue when working with Indesign documents to so if anyone one know the answers to the above but all related to indesign that would also be great!
Thanks everyone!

I thought about AdjustObjectAIColors, and its a good way to get a bunch of them but I'm not 100% sure if it covers all colours or just those found in paths. If not, this would exclude colours on effects & overlays for symbols, found in kPluginArt (though there is a similar function for plugin art specifically) and I imagine text. Probably a few other types if we look hard enough. Granted, paths are probably 90% of colours :-) I also wondered (sinc I haven't tried it before) how comprehensive that method is -- does it hit all the colours in various effects & styles layered on path? Or does it just hit the standard stroke & fill? I assume not, but I don't know.

Missing Font, But Font Isn't In the Document

Hello,
We're all using FrameMaker 10 on Windows 7.
My client and I are receiving the good old missing fonts error message, specifically:
The "ITC Stone Serif Std Medium Ital Italic" Font is not available.
It will be replaced by "Times New Roman Italic".
The "ITC Stone Sans Std Semibold" Font is not available.
It will be replaced by "Times New Roman".
First, the fonts are installed.
Second, Remember Missing Font Names is turned OFF. (Unchecked, cleared, etc.)
Third, the fonts are NOT in the document. I have saved the document as MIF. I have searched for the font names. Nothing. When I open the MIF file in FM, I don't get an error. But I save it as a .fm file, open it, and I receive the same error messages.
We don't use these fonts. We don't want them in our documents. I'm doing a massive clean up to get rid of old formats. About half of the files do not have any problems, but half do. I have tried everything:
- Generating a list of fonts. If the fonts are found, then I go in and manually apply the Default Para Font. Usually, doing this removes the font from the list of fonts. However, I still get the messages.
- Importing formats from a known good file.
- Editing the MIF, to the point of removing the entire paragraph, character, font, and table catalogs. (I started by deleting references to ITC Stone x, then went on to the more drastic measures.)
- Changing the default printer.
- Copying the text and pasting it into blank files based on known good files.
- I tried editing the maker.ini file to substitute fonts directly, but that didn't work. I may have been doing that wrong, though.
I've got over 10 years of FM experience, and I've never encountered a font problem that editing the MIF couldn't fix.
All of the documents came over from Frame 6. They're all in the same book.
We need to be able to work on the book file as an entity, without having to open the files that contain errors and leave them open.
Does anyone have any ideas?
Thank you very much!
~Robyn

I found the problem, but I'm not sure why it was a font problem to begin with:
Unresolved cross-references.
FM couldn't open all of the files in the book. Therefore, it couldn't update cross-references. It "thought" cross-references were unresolved.
I figured this out by deleting one page at a time from a Bad file. Then, I deleted one paragraph at a time from the Bad pages to determine that the cross-references were causing the problem.
I was cleaning up the book - deleting paragraph, character, cross-reference, table, and conditional text formats and master and reference pages. I then imported formats from a known Good file. The more files FM could open without errors, the fewer font errors I received. After I was able to generate/update the book, the font errors were gone.
Some of the font calls were on a reference page that was found only in select files. However, one would think that would show up in the MIF.
My best guess is that FM couldn't update the cross-reference formats without updating the cross-references, so it "thought" the text was still in the wrong font. That begs the question: Which came first, the unresolved cross-references or the missing fonts?
Of course, it doesn't explain why FM was complaining about a font that is installed.
Thank you everyone who took the time to answer. I'm sure this won't be the last time I run into this problem, and now I'll have a lot more knowledge for next time.
~Robyn

Field VBUND does not allow changes to the document ?

If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
I can't change trading partner.
Thanks!!
Message was edited by: Rico Wang

Rico,
Using trn code SM30, modify table V_TBAER and insert the entry
BSEG-VBUND for account type S, D, K, A
and see the effect.
Thanks
Mohit
ps: you may want to check OSS notes as well.

My font keeps changing size on it's own

I have a HP G62. My font keeps changing size when going on Gmail and Facebook. I have to fix it manually several times a day

Hi lindaniss,
That is a very odd issue that you are experiencing. I will be happy to assist you but I need some additional information. What program are you using to type the document? What email program are you using? What is your operating system? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How do I use the Japanese fonts in Font Book in a Pages document?

How does one use the Japanese fonts in Font Book in a Pages document. Pages has its own fonts but I cannot get the Japanese fonts into it.

To type japanese on a computer you change the keyboard, not the font. Go to system prefs/keyboard/input sources and add Japanese/Kotoeri to the list, then select Hiragana in the "flag" menu at the top right of the screen, then type. The font will take care of itself.
http://redcocoon.org/cab/mysoft.html
If you have any further questions, just ask.

How can I audit what has changed in a document in SharePoint?

Hello everybody
I need to audit the changes in all documents of my SharePoint server. That is, who has changed what, in a document such as an excel file. I need to know who has changed the file and what changes he has done to the file. How can I audit this kind of information?
Is it possible to audit this kind of information through SharePoint? If not, is it possible to do this job with the Excel it self, that it distinguish the changes made by the members (for example highlight the cells with different colours for different users)?
Thank you

Hi ,
As Margriet points, we can open different version items and check what are changed after enabling list/library version history.
Best Regards,
Eric
Eric Tao
TechNet Community Support

How do I change a pdf document to word

How do I change a pdf document to a word document

I didn't know but googling for "pdf to word mac" gave a lot of hits for software solutions. I didn't have time to read them but I think that is you best start.
I also searched Microsoft's Office:Mac site but did not look at their Office:Mac forum. You may get a faster answer there:
Office for Mac forums

No tax information exists for billing document

Hi
We have a problem. In our scenario, we create a service order followed by service confirmation and bill from service confirmation. All prices including taxes are maintained in r/3. prices and taxes are picked in the service confirmation also.
When we create an invoice from crm (CRM billing), the correct price and tax is picked . But when we try to maintain billing documents, we get an error as follows.
" No tax information exists for billing document 90000108-0000000010, condition type JIVC". Document are not getting posted to R/3.
JIVC is the tax condition type created in r/3 and downloaded to crm. GL account determination settings have been maintained in CRM.
However when i do a billing in CRM without tax, accounting documents are generated and hitting the right GL account. Also, when we do a billing in in r/3, the tax is hitting the right GL account.
I have not maintained any TTE settings in CRM. Are TTE settings required at all in this scenario? If so could you inform what needs to be done.?
We are on CRM 5.0 and R/3 4.7.
Thanks and regards
Bhaskaran

Hi Bhaskaran,
In CRM according to the taxes there r two ways of calculation,
in ur scenario u r using the R3 billing so it according to downloading of condition types and cond records it will shows the taxes in the invoice
if u r maining u need to call the TTE
i hope u r with indian client if follow in backend
check these settings in R3
TAXINN (India):
Following are the condition types:
Define New Condition Type
IMG > Sales and Distribution > Basic Functions > Pricing > Pricing Control > Define Condition Types > Maintain Condition Types (V/06)
T.Code - Details of Condition Types
V/06 JIVP copy of JLST (A/R VAT Payable) & change condition category to D & Access Sequence MWST
V/06 JIVC copy of JLST (A/R CST Payable VAT) & change condition category to D & Access Sequence MWST
OBQ1 - JIVP copy of JLST (A/R VAT Payable)
OBQ1 - JIVC copy of JLST (A/R CST Payable VAT)
Define Account Key JN6,JN7 & JN8 (T.Code: OBCN & also in SD)
IMG> Financial Accounting> Taxes on Sales and Purchases> Basic Setting> Check & change setting for Tax Processing (OBCN)
IMG> Sales & Distribution> Basic Function> Account Assignment / Costing> Revenue Account Determination> Define & assign Account Keys> Define Account Keys.
and check the proper condition records r downloaded or not check middleware settings for that.
If u r doing CRM billing i am not sure of indian client, as i know u need to do maintain the Pricing procedure in CRM also and u have to call the TTE
Regards
Manohar

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Font information changed, may effect document?

Similar Messages

Maybe you are looking for