Font is small while printing alv list report

Hi,
while printing ALV list report font is too small, can you tell me where i can increase the font size. I tried in GUI font ,In which i can increase the font for GUI, not for ALV priniting . Can any body help me to solve this problem?
Regards,
siva kumar

HI Kushboo,
I think You are talking about header text in ALV , while printing ALV list i need to increase all the font size.. In fieldcatlog there is no option called Style...for increasing ALV font line item details. Can you tell me which style you are talking about?
Regards,
siva kumar

Similar Messages

Alv list report-problems while printing

hai,
i get following dump error when tryign to print a alv list report.
'Illegal interruption of the event LOAD-OF-PROGRAM.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSZA12" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    During the flow of the event LOAD-OF-PROGRAM (event for the
    initialization of an ABAP program), a condition occurred under which
    the event was to be left early. This is not permitted as it would
    result in an inconsistent status in the ABAP program.'
the problem resolves for a particular output(when i restrict the list to lesser rows) by changing FORMAT from
X_65_255 to X_90_120 in the print dialog properties option..
however this restricts the coloumn width..
anycase i will have to print the output for all conditions.
the problem seems to be centred around number of rows in the list output..

is somethign wrong with the values in this internal table gt_comtypes_tab...
this is where the dump is pointing..at LAOD OF PROGRAM EVENT
1     FUNCTION addr_get_conversion_table.
2     *"----
3     ""Lokale Schnittstelle:
4     *" EXPORTING
5     *"     VALUE(COMTYPES_TAB) TYPE ADCOMTYPES_TAB
6     *" EXCEPTIONS
7     *"      INTERNAL_ERROR
8     *"----
9
10       comtypes_tab = gt_comtypes_tab.
11
12     ENDFUNCTION.
values of gt_comtypes_tab.
2     TEL     ADTEL
3     FAX     ADFAX
4     TTX     ADTTX
5     TLX     ADTLX
6     INT     ADSMTP
7     RML     ADRML
8     X40     ADX400
9     RFC     ADRFC
10     PRT     ADPRT
11     SSF     ADSSF
12     URI     ADURI
13     PAG     ADPAG

Problem with printing ALV lists

Hey Guys,
I have a problem with printing ALV lists ,
I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
How can i print them all in one page?
Thanks in advance
Noha Salah.

Hey Max,
I tried setting the Layout-list_append before my block_list_append function call
And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
to their original format?

Printing ALV list with ADS (pdf printer) in non-english charset

Hello!
I have an issue about printing alv list with pdf printer in non-english charset. We have two printers. One for alv lists (SWINCF: Casc.Fonts SAPWIN Unicode) and one for pdf forms(adobe document service). I want to use one printer for any documents. But PDF printer prints non-english charset like ########.
What can I do ?

Hi, Roman!
I want to use PDF printer for both types of output. I have a dedicated java instance for ADS.
There is a device type for our Kyocera Printer. My pdf printer prints ALV list good exept russian charset.
It prints like #####

Print ALV List

Hi experts,
T code ME2m   after executing i would like to print that sheet . with all coloms in A4 size paper.
how can Increse size of LETTERS and colom and rows.
after pressing PRINT icon we will get pop up window(Print ALV List.
then Output device - Local
number of copies1
Print from page   1         1
Then i clicked   PROPERTIES
then i double clicked PARAMETER VALUE     X_65_255
then i selected Format radio button then i selected X_58_170..
then i executed..
that tiem system giving message   like
System cannot print the last 176 columns of the
report
but i am not getting all the fealds in the page ?
how to do configuration for this.
Regards,
Anthyodaya.

In ME2N menu List --> Export document to word processing -> Create word document-> Start MS word.
After downloading,Click F11,Save it as word document,Adjust page set up to Land Scape and also custom paper format
to accommodate all fields in print.

Issue Regarding ALV List Report

Hi,
I have prepared a ALV List report.
I have made use of REUSE_ALV_LIST_DISPLAY.
I have put a check box in the output at the begining of every Record.
Now what i want is to put a SELECT ALL & DESELECT ALL Buttons on Application Tool Bar & If i hit on them i should be able to SELECT & DE-SELECT all the Records/Check Boxes in the output.
Can anybody tell me the logic for both SELECT & DE-SELECT functionalities.
Thanks in advance.
Thanks & Regards,
Prasad.


Hi,
Call to F.M is as below:
FORM f_display_alv_report .
DATA: l_valid,
 l_params LIKE pri_params.
SET PF-STATUS c_alv.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
 EXPORTING
 mode = 'BATCH'
 report = v_repid
 no_dialog = c_x
 IMPORTING
 out_parameters = l_params
 valid = l_valid.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = v_repid
 i_callback_user_command = c_command
 i_callback_pf_status_set = c_alv
 is_layout = i_gd_layout
 it_fieldcat = i_fieldcatalog[]
 it_events = i_events
 is_print = i_params
 i_save = c_x
 TABLES
 t_outtab = i_display_data
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_display_alv_report
Then User Command Call is as below:
FORM f_user_command USING p_ucomm LIKE sy-ucomm
 p_selfield TYPE slis_selfield.
CLEAR: v_field, v_index, v_line, v_value.
IF p_ucomm EQ c_select.
 LOOP AT i_display_data.
 i_display_data-selected = c_x.
 MODIFY i_display_data TRANSPORTING selected.
 CLEAR i_display_data.
 ENDLOOP.
ELSEIF p_ucomm EQ c_deselect.
 LOOP AT i_display_data.
 i_display_data-selected = space.
 MODIFY i_display_data TRANSPORTING selected.
 CLEAR i_display_data.
 ENDLOOP.
ENDIF.
Get cursor field, value and Line
GET CURSOR FIELD v_field
 VALUE v_value
 LINE v_line.
v_line = v_line - 3.
CLEAR: i_display_data,
 i_mem,
 v_mem_kschl,
 v_mem_printer,
 v_ucomm,
 v_mem_print.
REFRESH: i_mem.
LOOP AT i_display_data
 WHERE selected EQ c_x.
 i_mem-v_mem_vbeln = i_display_data-vbeln.
 i_mem-v_mem_posnr = i_display_data-posnr.
 APPEND i_mem.
 CLEAR i_mem.
ENDLOOP.
READ TABLE i_display_data INDEX v_line.
IF sy-subrc EQ 0.
 v_mem_kschl = p_kschl.
 v_mem_printer = p_print.
 v_ucomm = sy-ucomm.
 EXPORT i_mem TO MEMORY ID 'MEM'.
 EXPORT v_mem_kschl TO MEMORY ID 'KSCHL'.
 EXPORT v_mem_printer TO MEMORY ID 'PRINTE'.
 EXPORT v_ucomm TO MEMORY ID 'UCOM'.
ENDIF.
CASE p_ucomm.
To Print SAP Script Output
 WHEN c_print.
 v_mem_print = c_x.
 EXPORT v_mem_print TO MEMORY ID 'PRINT'.
 v_return_code = c_999.
 v_screen = c_x.
 IF ( v_field EQ c_mark OR
 v_field EQ c_selected OR
 v_field EQ c_vbeln OR
 v_field EQ c_posnr OR
 v_field EQ c_kschl ) AND
 NOT v_value IS INITIAL.
 PERFORM f_entry IN PROGRAM zasdf0012_sales_order
 USING v_return_code v_screen.
 ENDIF.
Display SAP Script Output
 WHEN c_pripreview.
 v_return_code = c_999.
 v_screen = c_x.
 IF ( v_field EQ c_mark OR
 v_field EQ c_selected OR
 v_field EQ c_vbeln OR
 v_field EQ c_posnr OR
 v_field EQ c_kschl ) AND
 NOT v_value IS INITIAL.
 PERFORM f_entry IN PROGRAM zasdf0012_sales_order
 USING v_return_code v_screen.
 ENDIF.
 WHEN c_back.
 BACK.
 WHEN c_exit.
 CALL METHOD cl_gui_cfw=>flush.
 LEAVE TO SCREEN 0.
 WHEN c_cancel.
 CALL METHOD cl_gui_cfw=>flush.
 LEAVE TO SCREEN 0.
 WHEN c_others.
ENDCASE.
ENDFORM. " F_USER_COMMAND
The Field Catalog Build up is :
i_fieldcatalog-fieldname = 'KSCHL'.
i_fieldcatalog-tabname = 'I_DISPLAY_DATA'.
i_fieldcatalog-seltext_m = 'Output Type'.
i_fieldcatalog-col_pos = 1.
i_fieldcatalog-outputlen = 11.
APPEND i_fieldcatalog.
CLEAR i_fieldcatalog.
i_fieldcatalog-fieldname = 'VBELN'.
i_fieldcatalog-tabname = 'I_DISPLAY_DATA'.
i_fieldcatalog-seltext_m = 'Sales Document No'.
i_fieldcatalog-col_pos = 2.
i_fieldcatalog-outputlen = 17.
APPEND i_fieldcatalog.
CLEAR i_fieldcatalog.
i_fieldcatalog-fieldname = 'POSNR'.
i_fieldcatalog-tabname = 'I_DISPLAY_DATA'.
i_fieldcatalog-seltext_m = 'Sales Item No'.
i_fieldcatalog-col_pos = 3.
i_fieldcatalog-outputlen = 14.
APPEND i_fieldcatalog.
CLEAR i_fieldcatalog.
Events Build Up:
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = i_events.
READ TABLE i_events
 INTO wa_events
 WITH KEY name = slis_ev_top_of_page.
IF sy-subrc = 0.
 MOVE c_top_of_page TO wa_events-form.
 MODIFY i_events FROM wa_events INDEX sy-tabix.
ENDIF.
READ TABLE i_events WITH KEY name = c_user_command
 INTO wa_events.
IF sy-subrc = 0.
 MOVE c_command TO wa_events-form.
 MODIFY i_events FROM wa_events INDEX sy-tabix.
ENDIF.
Layout Buil up is as:
i_gd_layout-no_input = space.
i_gd_layout-colwidth_optimize = c_x.
i_gd_layout-totals_text = 'Totals'(201). "#EC *
i_gd_layout-box_fieldname = 'SELECTED'.
i_gd_layout-box_tabname = 'I_DISPLAY_DATA'.
i_gd_layout-edit = c_x.
Here one thing we need to take care id i am combining Check Box with & another field Output Type [KSCHL] like in Std. TCode VL71.
Can anybody solve this issue!
Thanks for reply.
Thanks & Regards,
Prasad.

Suppress "Print ALV List" dialog.

HI All,
Is there a way of suppressing the "Print ALV List" dialog that is displayed when you print an alv using REUSE_ALV_BLOCK_LIST_DISPLAY. The is_print parameters does not contain any option, though there is a supress_dynpro option before the dialog is called, not sure how to set this is_print parameters.
Rgds,
James.

Hi,
<li>You can not suppress print parameters popup screen using REUSE* function module. It comes thats it. I tried for longtime to suppress, could not pass
<li>But when you print classical reports you can suppress it.
 REPORT ZTEST_NOTEPAD.
DATA:G_LAY TYPE PRI_PARAMS-PAART,
 G_LINES TYPE PRI_PARAMS-LINCT,
 G_COLS TYPE PRI_PARAMS-LINSZ,
 G_VAL TYPE C.
DATA:W_PRIPAR TYPE PRI_PARAMS,
 W_ARCPAR TYPE ARC_PARAMS.
PARAMETERS:
 P_DATA(10) TYPE C.
START-OF-SELECTION.
 G_LAY = 'X_65_132'.
 G_LINES = 65.
 G_COLS = 132.
 "Read, determine, change spool print parameters and archive parameters
 CALL FUNCTION 'GET_PRINT_PARAMETERS'
 EXPORTING
 IN_ARCHIVE_PARAMETERS = W_ARCPAR
 IN_PARAMETERS = W_PRIPAR
 LAYOUT = G_LAY
 LINE_COUNT = G_LINES
 LINE_SIZE = G_COLS
 NO_DIALOG = 'X'
 IMPORTING
 OUT_ARCHIVE_PARAMETERS = W_ARCPAR
 OUT_PARAMETERS = W_PRIPAR
 VALID = G_VAL.
 IF G_VAL NE SPACE AND SY-SUBRC = 0.
 W_PRIPAR-PRREL = SPACE.
 W_PRIPAR-PRIMM = SPACE.
 NEW-PAGE PRINT ON
 NEW-SECTION
 PARAMETERS W_PRIPAR
 ARCHIVE PARAMETERS W_ARCPAR
 NO DIALOG.
 ENDIF.
 WRITE 'Output in spool'.
 NEW-PAGE PRINT OFF.
 CALL FUNCTION 'ABAP4_COMMIT_WORK'.
 DATA:TEXT TYPE STRING.
 CONCATENATE 'Spool' SY-SPONO 'is generated' INTO TEXT SEPARATED BY SPACE.
 MESSAGE TEXT TYPE 'S'.
Thanks
Venkat.O

SAVE Layout Option in ALV list Report

Hi Experts,
Is it possible to SAVE the layout option for Block ALV list Reports?
Thanks in Advance,
Sivak.

Hi,
It is not possible to save layout in BLock ALV display but possible to change layout. There is no parameter to save. It is not possible to store the layout as it has several structure.
Thanks & Regards
Rocky

How To Create Header in ALV List Report

Hi All,
I want to create a Header for MY ALV List Report!
How can i achieve the same. It should come above ALV.
ALV report i had already written and it is coming correctly.
Heading should look like this:
1st Line
PROGRAM NAME: XXXXXX CLIENT: XXXXXXXXXX PAGE:XX
2nd Line
RUN DATE/TIME: XXXXX - XXXX REPORT NAME/HEADER
How can i acheive the same in ALV List Report!
I am amking use of REUSE_ALV_LIST_DISPLAY Function module.
Thanks in advance.
Thanks & Regards,
Prasad.

Hi Prasad,
Use the sample code specified below as the guideline. For more info. refer to the documentation of the FM 'REUSE_ALV_COMMENTARY_WRITE'.
DATA: first(01) type c,
events type slis_t_event,
gt_list_top_of_page type slis_t_listheader,
ls_event type slis_alv_event.
initialization.
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = events
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
read table events with key name = 'TOP_OF_PAGE'
into ls_event.
if sy-subrc = 0.
move: 'TOP_OF_PAGE' to ls_event-form.
append ls_event to events.
clear ls_event.
endif.
End of additions
Start-of-selection
START-OF-SELECTION.
Top-of-page
TOP-OF-PAGE.
PERFORM TOP_OF_PAGE.
FORM TOP_OF_PAGE .
data: ls_line type slis_listheader.
if first is initial.
ls_line-typ = 'S'.
ls_line-key = 'Run Date :'.
write: sy-datum to ls_line-key+10 mm/dd/yyyy.
ls_line-info = 'Billing Date:'.
write: s_fkdat-low to ls_line-info+15 mm/dd/yyyy.
ls_line-info+28 = 'To'.
write s_fkdat-high to ls_line-info+32 mm/dd/yyyy.
append ls_line to gt_list_top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
first = 'N'.
else.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
endif.
ENDFORM. " top_of_page
Please mark helpful answer.
Regards,
Amit Mishra

Create Change Layout in ALV list report

Hi,
i have create my own change layout button at my alv list report, my problem is i don't know what coding can be used to activate the change layout function in my own button. Who have sample programming for this function please share it....
tq.

Hi,
By default if you're using the ALV List Display function module, there's no need for you to code the 'Change Layout' function, the standard function will be there, unless there's something you want and the standard 'Change Layout' function could not provide.
Go to Abap Editor and look for program with 'BALV*'. You'll get a whole list of DEMO program on ALV.

Editable column in ALV list report

Hi,
I developed a ALV list block report. I want to make some of column editable in my alv list report.I set WA_FIELDCAT-EDIT     = 'X' in fieldcatalog but it's not working.
Could you please sugest.
Regards,
Mohit

Hi Mohit ,
please check WA_FIELDCAT-EDIT = 'X'    fieldcat which you are passing to ALV grid function module is same or different .
or use in this way
perform get_fieldcat using 'QUANTITY'     'Enter.Qty'               12 'R' 'N' '000' 'N' 'N' 'N' 'N' 'N' 'N' .
get_fieldcat using   p_fieldname
                            p_txtname
                            p_length
                            p_justfy
                            p_keyfld
                            p_color
                            p_hotspt
                            p_total
                            p_sort
                            p_subtot
                            p_para1
                            p_zero .
clear ms_fieldcat .
ms_fieldcat-fieldname = p_fieldname .
ms_fieldcat-seltext_l = p_txtname   .
ms_fieldcat-ddictxt   = 'L'         .
ms_fieldcat-outputlen = p_length    .
ms_fieldcat-just      = p_justfy    .
ms_fieldcat-lzero     = 'X'         .
ms_fieldcat-checkbox = 'X'          .
ms_fieldcat-edit     = 'X'          .
if p_fieldname = 'CHK' .
    ms_fieldcat-checkbox = 'X'.
    ms_fieldcat-edit = 'X'.
else.
    ms_fieldcat-checkbox = ' '.
    ms_fieldcat-edit = ' '.
endif.
if p_fieldname = 'QUANTITY' .
    ms_fieldcat-edit = 'X'.
endif.
regards
Deepak.

Keeping alv list report layout

when i run my alv list report using the saved layout and then change the layout of the report and then go into one of the items, i want the report to keep the changed layout when i save and go back to the report. at the moment its reverting back to the standard layout when go out of the transaction

Make the Default Layout as your Changed Layout it'll work. It Can be done in the properties i guess.
Regards,
Sai

Skip "Print ALV list" pop up while saving ALV as PDF

Dear experts,
I am converting my ALV list into PDF.
im using
CONVERT_ABAPSPOOLJOB_2_PDF
and
GUI_DOWNLOAD
But it pops up a screen asking the default printer. What parameters do i need to pass to CONVERT_ABAPSPOOLJOB_2_PDF so that I can skip the pop up?
I have already tried passing --
NO_DIALOG = 'X'
 DST_DEVICE = 'locl'
Regards,
Sumit.

Hi Sumit,
first use:-
CALL FUNCTION 'RSPO_FIND_SPOOL_REQUESTS'
 EXPORTING
 allclients = '320'
 datatype = '*'
 has_output_requests = '*'
 rq0name = nast-dsnam
 rq1name = '*'
 rq2name = '*'
 rqdest = 'LOCL'
 rqowner = sy-uname
 TABLES
 spoolrequests = it_spool
 EXCEPTIONS
 no_permission = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE i000 DISPLAY LIKE 'E' WITH text-002.
 LEAVE LIST-PROCESSING.
ENDIF.
FORM convert_spool_to_pdf .
READ TABLE it_spool INTO wa_spool INDEX 1.
v_spoolno = wa_spool-rqident.
*Get Spool request attributes
SELECT SINGLE *
 FROM tsp01
 INTO tsp01
 WHERE rqident EQ v_spoolno.
IF sy-subrc <> 0.
 MESSAGE i000 DISPLAY LIKE 'E'
 WITH text-003 v_spoolno text-034.
 LEAVE LIST-PROCESSING.
ENDIF.
v_client = tsp01-rqclient.
v_name = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
 EXPORTING
 authority = 'SP01'
 client = v_client
 name = v_name
 part = 1
 IMPORTING
 objtype = v_objtype
 EXCEPTIONS
 fb_error = 1
 fb_rsts_other = 2
 no_object = 3
 no_permission = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE i000(zz) DISPLAY LIKE 'E'
 WITH text-003 v_spoolno text-034.
 LEAVE LIST-PROCESSING.
ENDIF.
IF v_objtype(3) EQ 'OTF'.
 CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = v_spoolno
 no_dialog = ' '
 TABLES
 pdf = it_pdf
 EXCEPTIONS
 err_no_otf_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_dstdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
 IF sy-subrc <> 0.
 ENDIF.
ELSE.
 CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = v_spoolno
 no_dialog = 'X'
 TABLES
 pdf = it_pdf
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDFORM. " convert_spool_to_pdf

Printing Selection-Screen while printing ALV Grid output display

Hi,
I have a requirement wherein I want to print the Selection Screen also while printing the output in simple ALV grid Display.
Currently when I print the ALV output report, only the header and the Body of the ALV is getting printed. But the requirement is that I also want to print Selection screen along with this.
If anyone has faced a similar situation, plz let me know what needs to be done in order to print the selection screen also while printing the ALV report output.
Rgds,
Nitin

Hi,
You can use given function module to print your
selection screen
RS_REFRESH_FROM_SELECTOPTIONS
>This will get Current contents of selection screen
RS_LIST_SELECTION_TABLE
>This will Generates list according to values in selection table(RSPARAMS)
Sample
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
       EXPORTING
            curr_report     = p_repid
       TABLES
            selection_table = it_int_tab
       EXCEPTIONS
            not_found       = 1
            no_report       = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
    WRITE:1 'Selection Criteria'(i19),
         /1 sy-uline(18),
         /1 'Variant Name'(i21),
         23 sy-slset.
*-- This function module lists the Selection Screen contents
    CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
         EXPORTING
              report        = p_repid
              seltext       = 'X'
              newpage       = space
         TABLES
              sel_tab       = it_int_tab
         EXCEPTIONS
              sel_tab_empty = 1
              OTHERS        = 2.
Mark all helpful answers

Print ALV List error

Hello,
We have a custom ALV report which is very wide (more than 1000 chars).
Now, when I try to print the list the field with the number of columns is grey (for some users it is grey and for some users it is editable). The format is set to X_65_255.
When I don't change the number of columns to 255 and trigger the printout I receive the gui error "The memory could not be read blablabla" and the GUI closes. When I change the number of columns to 255 the printout is ok.
Do you know why for some users the field is grey (user profiles are the same)? What I can do not to receive the gui error while printing.
Regards,
Piotr

Hi,
See this thread ALV Program errors
Regards,
Flavya

Font is small while printing alv list report

Similar Messages

Maybe you are looking for