Font Issue after applying Patch on Forms 6i

Hi
we applied forms 6i patch 18 for some users the fonts are not appearing properly on the Web.
Has anybody experienced this before.
Please help.
regards.

Please provide details when posting if you expect quick answers.
If you are using Jinitiator and upgraded the version, it is likely that this is causing the problem. This will be especially true if you moved from 1.1.8.x to 1.3.1.x, although still possible with any big jump in versions. If this is the case, the easiest way to prove this theory is to uninstall the current Jinit version and resinstall the previous and retest. If a change in the Jinit does prove to have been the cause, there isn't much you can do, as there was a change in the font handling as you move to newer JRE (Jinit) versions.
You may be able to get some release by setting the mapFonts applet parameter to YES. Refer to MyOracleSupport note 338925.1 for more information.

Similar Messages

  • Invoices Issue After applying patches of 11i Extended Support

    Platform: Windows 2003 R2 32-bit
    EBS: 11.5.10.2 (with 11i Extended Support Patches)
    DB: 10.2.0.4
    After completing the 11i Extended Support Patching activity we are receiving a complain from users' side that:
    while user run autoinvoice program, auto invoice validation report shows following error
    Please define all periods in which revenue is to be recognized
    I have also check period in GL as well as receivable period is open status.

    1.
    Metalink Note:550572.1 says:
    Specifically, the parameter btree_bitmap_plans should be set to False
    And parameter is alreadt set as per note.
    2.
    Metalink Note:369437.1 says:
    FYI: One-off Patch 4587470 on top of 11.5.AR.O is available
    Which contains following file version:
    ar patch/115/sql ARTECMMB.pls 115.67.15104.2
    and we are already on version
    ar patch/115/sql ARTECMMB.pls 115.67.15104.8
    above AR.O.

  • Issue with updation of PAN details in ESS after applying patch

    Hi ,
    We have applied a new patch recently,
    as follows:
    SAP_HR - To patch - 49
    EA_HR - To Patch - 49
    When users are trying to update PAN details it says throwing error " fill in the required fields,"
    i tried to apply relevent note :1243216 , but iam not able to apply it as system says it cannot be implemeted.
    Can any body come accross this issue please give me solution as this issue has become critical.
    Thanks in advance .
    Regards,
    Evani

    Duplicate post.
    After applying patch , error found on bottom of signon screen
    After applying patch , error found on bottom of signon screen

  • Portal Runtime error after applying patch 12 to portal

    hi experts,
    i m getting following error
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.portal.webdynpro_ws/com.sap.portal.content_administrator/com.sap.portal.wd_content_administrator
    Component Name : com.sap.portal.appintegrator.sap.WebDynpro
    Exception in SAP Application Integrator occured: ApplicationIntegratorException.
    Exception id: 09:30_22/01/08_0005_16892850
    See the details for the exception ID in the log file
    after applying patch 12 in portal
    i m getting this error in guided procedures,Universal worklist ,webdynpro workset undfer content administration
    Please suggest me the solution
    regards,
    vani

    Hi Vani,
    Just go to the System Configuration and UME configuration.
    Now go to user mapping tab, and remove the entry for a reference system. Then check for the issue if persists, restart system.
    Hope this helps!
    regards
    Atul Shrivastava

  • My query is not executing properly after applying patches(bi.7

    iam working bi.7 support package 13
    after applying patches
    my query is not executing properly in production my problem with FI queries
    the query is executing properly but ihav created newformula using formulavariable that fields are not getting data in report if i click on currency conversion iam getting popup but currency translation coversion list is not coming and currency type(target currency also not dispalying)
    but if i execute same query in development its working properly newformula fields are getting data and currency conversion also working in development
    can u please help me in this issure
    i hope as soon i will get solutions from bw gurus

    That currency conversion problem is solved
    i checked TCODE:RSCUR IN PRD its not showing any details
    again i checked in dev and moved all currency types dev to production
    now its wokring
    i hope check with this it will work

  • How to apply patch to forms 6i and report 6i version

    Hi to All,
    Can any give any link or Metalink Doc ID or any method to how to apply patch to forms and reports 6i in cleint server architecture.
    Thanks and Regards
    imran

    Hi user622720
    Pls Check this Link
    Pls verify this as an example:
    MyProject =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = servername)(PORT = 1540))
    (CONNECT_DATA =(SID = TEST))
    and change the bold fields as required according to ur application..!
    Hope it Helps,
    Regards,
    Abdetu..

  • Internet Procurement responsibility error after applying patch

    Hi Guru(s):
    After applying patch 5156915 we get this errro when we select i Procrurment responsibility:
    The POR SSP HOME function is not available under the Internet Procurement responsibility.
    iProcurement is installed.
    Any ideas would be most welcome thank you.
    EBS 11.5.10
    Edited by: Dan A on Dec 16, 2008 9:10 AM

    Thanks yet again to Hussein.
    I am a little worried that I couldnt find that same document.
    I entered in ML "The POR SSP HOME function is not available" ....and that document did not appear.
    Then I entered it with underscores : "The POR_SSP_HOME function is not available" ... and now I can see the doc.
    How did you do your search?! I am guessing you used udnerscores or else something different? ? ?
    Thanks, and still curious,
    DA
    By the way we are told to "clear" the _pages directory. I would do this with
    cat /dev/null > oa_html , etc ?
    Edited by: Dan A on Dec 16, 2008 9:44 AM

  • Login page not coming up after applying patch 12374730

    Hi ,
    Login page is not coming up after applying patch 12374730.
    OS : Solaris 10
    Application release 12.1.3
    Thanks,

    Did you apply the patch successfully with no errors?
    Yes
    Do you have any invalid objects in the database?
    NO
    Did AutoConfig complete successfully?
    Yes
    Please check Apache log files for details about the error.
    Thanks,
    Hussein

  • Invalid package WWSBR_IMT_SERVICES after apply patch 3.0.9.8.1

    After applying patch 3.0.9.8.1, get an invalid package.
    Upon trying to compile the package WWSBR_IMT_SERVICES the following error
    occurs
    SQL> show err
    Errors for PACKAGE BODY WWSBR_IMT_SERVICES:
    291/7 PL/SQL: Statement ignored
    291/20 PLS-00201: identifier 'CTX_DOC.PKENCODE' must be declared
    293/8 PL/SQL: Statement ignored
    293/21 PLS-00201: identifier 'CTX_DOC.PKENDCODE' must be declare
    We have NOT installed oracle intermedia... why is this error occuring?

    According to BUG 2120388 this is ok!

  • Issue after applying Cumulative update on SharePoint 2010 Server

    Hi All,
    We got an issue after applying the "SharePoint Server 2010 and Project Server 2010 Cumulative Update Server Hotfix Package (MOSS server-package,
    Project server-package): June 28, 2011" on SharePoint 2010 server.
    Environment details:
    OS: Windows server 2008 R2 with SP1
    TFS: TFS 2010 with SP1
    DB:  SQL Server 2008 R2
    SharePoint: SharePoint 2010 with SP1
    Due to this issue we are not able to proceed further to integrate PS 2010 with TFS 2010. Can someone please suggest solution for this issue.
    Thanks,
    Rajukumar

    Hi Rajukumar,
    At the very first, please refer to the article below for installing CU on Project 2010 server:
    http://technet.microsoft.com/en-us/library/dd239177(v=office.14).aspx#Installation_steps
    I found a blog for this issue:
    http://blogs.msdn.com/b/brismith/archive/2011/07/06/project-server-2010-sp1-and-june-2011-cu-formatexception-when-trying-to-provision-a-pwa-site.aspx
    In addition, I'd recommend you install latest update for your server.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Icons for the Reports missing in Workspace after applying patches

    Hello Gurus,
    I have installed 11.1.2.2 on one of my VM's and then applied the 11.1.2.2.300 patch on it.
    I have followed the Read Me for all the patches before applying them.
    After applying the patches however the icons for the Reports in workspace
    [IMAGE ON THE FOLLOWING LINK]
    http://i45.tinypic.com/29f6mc0.png
    I have reconfigured web server at the end but that did not help. Any help will be highly appreciated.
    Thanks
    HyperionEPM.

    Hello Nick,
    Yes all the components show green and I can access the reports without any issues. Its just the icon that does not show up.
    I will check the logs you have mentioned to see if there are any exceptions in them.
    But the issues started up after applying the patches for 11.1.2.2.
    I have checked the location path mentioned in Weblogic.xml in raframework.war file and the path points to the correct folder location where the folders mt and mt_thumbnails are located.
    Is the any other way out?
    Should I delete the contents inside the tmp folder located in RAFramework0
    or
    Can reconfigurin Reporting and Analysis framework services help in resolving the issue?
    Please let me know.
    Thanks.
    hyperionEPM

  • How should I apply patches to forms 6i?

    Hi,
    Someone told me that in order to work properly with forms 6i you have to apply patches.
    How could we find that our forms 6i need patches in order to run properly on windows 2000 Server?
    I have a metalink account, what patch of forms 6i I need and how should I download it and then how should I apply it to forms 6i from METALINK?
    After applying required patch does forms 6i works properly in the future?
    Thanks
    Behari

    Without having any details about your problem, there is no way of knowing if a "patch" will solve your problem. Additionally, there are no specific patches required which are needed to run on Windows 2000. All 6.0.8.x versions were certified on Win2k
    However, the latest and last patch for Forms/Reports 6i is Metalink Patch ID# 4183804
    This will make your Forms version 6.0.8.26

  • Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

    hi everyone.
    here is the problem
    we recently applied patch 5 for CM on EP 6.0 SP2
    the portal platform is at patch 27.
    after having applied the patch the logs indicated that the upgrade sequence completed successfully.
    however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
    under system admin when we go into Content Management Configuration it says invalid Repository Managers.
    i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
    i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
    can somebody help?
    thanks

    Hi,
    I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
    Hope this helps
    Cheers,
    Jochen

  • Font issues after OS 10.4.9 update

    Hi, I just updated my macbook pro yesterday and am having font issues now. I noticed the date in iCal is messed up, also certain webpages and email are garbled up.
    for example most of the text on this page http://cardboardrocket.com/pages/paginating_find is messed up in safari it looks all garbled. While in firefox and camino that same page looks fine.
    On a side note, my startup after updating took forever. After it finally finished upon opening font book I see all of my fonts have been activated. They weren't before I did the update.
    Any thoughts?

    for example most of the text on this page
    http://cardboardrocket.com/pages/paginating_find is
    messed up in safari it looks all garbled.
    No one else is going see anything wrong with this page unless they have the same problem you do. You need to provide screenshots.
    But the normal cause of garbled text is the presence of the fonts Helvetica Fractions and Times Phonetic. Dump them if you have them. Also clean your font caches with FontFinagler (use google to find it).

  • Dump error after applying patches

    Dear all;
    after applying SAP_BASIS Packs (SAPKB62019 and SAPKB62020) the transaction was canceled before finched implementing the patches and We are receiving ABAP dump errors while executing any transaction ( syntax_error)
    could you help me to resolve this proble?
    thanks and regards.
    Issam CHIBOUNI

    Hi
    SAPKB62020
               Symptom: After you import Basis Support Package SAPKB62020, you may experience a change in the system response at different points in an R/3 Enterprise system. This problem can be seen in the sudden appearance of screen elements, for example, or in changes in the process flow of transactions. In extreme cases, it can also cause data corruption.
               Reason: Support Package SAPKB62020 included an incomplete correction to BAdI processing that caused the execution of BAdI implementation of deactivated Enterprise Extensions.
               Solution: You must refer to SAP Note 601742. Import Basis Support Package SAPKB62023 as soon as possible (planned release date is May 06, 2003) or implement the additional correction instructions as described in Note 601742.
    thanks and regard
    Khurshid

Maybe you are looking for

  • How to get a value from applet in jsp?

    Dear all, I have a jsp page which includes a applet (in a form). User click to my applet and get the value. and the jsp form can capture the value of the applet and send to servlet. Is it possible? If it is possible, how to do that? Thanks. Regards,

  • Video pauses when streaming from ix2-dl from windows or WD Live TV

    When streaming music videos or any video from my Lenovo ix2-DL to my WD Live TV or PC the videos play but then pause then will pick up a bit further down. In Windows if I refresh my Explorer window it acts like the share isn't there then it reconnect

  • Custom HTTP 503 Error

    Does anybody know how to customize the HTTP 503 error message output when the database is down? Thanks.

  • Install firefox gpo msi package

    Hello, How to install and upgrade firefox automaticaly on more than 100 computers in corporate invoirment. (users without administrative permissions and very limited internet connections) Can we expect original firefox msi packages in the future, to

  • Problems with Adobe CS5 on user accounts

    Hello Everyone, I'm a high school web design teacher and I'm having trouble getting Adobe CS5 to run on my student workstations when they are logged in as a "mobile" user. Workstation 10.5.8 Server 10.4.9 Workgroup manager 10.5.3 Students can browse