Font issue in CS4

I'm trying to figure out if somehow I've messed up a setting or something in my Photoshop CS4.
I had done some mockup screens for a project and after implementation noticed that my font size and the font being used in the developed course were noticeably different. I asked about it and was told that it was 11pt, the same as I had used in photoshop.
I found several conversion charts stating 11pt = 15px so I pulled a selection to measure a letter in my mockup screen and my 11pt was 8 pixels tall where-as when I changed my font size to 15pt the font then measured 11 px tall and matched matched the developed page visually.
It doesn't seem to matter if I have my unit measurements set to pixels or points the typed font is the same size. 15pt or 15px in the type tool size = 11pt/px when I measure it which is correct but but reversed compared to the conversion charts i've found.
My source file is 72 dpi. Font is 11pt and measures 8px tall and when set to 15pt it is 11px tall which is the proper ratio but backwards?
Font being used in my mockup and the developed course is Verdana.
I am using CS4 Extended in Win 7 Pro if that matters.
Am I just confusing something here, I'm sure I'm overlooking something pretty simple.
Thanks,
ian

The pixel heights of the fonts depend on the ppi setting metadata.
To put it succinctly, the fonts will be larger (relative to the image content) if the pixels/inch in the Image - Image Size... dialog is larger.
That way, when the image is printed at the ppi listed, the fonts will be consistently the right size.
Hope this helps.
-Noel
P.S., if you have already put text in a text layer when you change the PPI of the image using Image - Image Size... you will find the font size will be changed by Photoshop so that the font is still the same size relative to your image data. The thinking is that you made the text that size to look right in the image, so you wouldn't want it to magically change just because you changed the ppi of the document.

Similar Messages

Font issue on CS4 cannot easily change fonts

Normally I can arrow down through fonts, for some reason its not allowing me to do that, when I try and arrow down through the font list to try a word out in diff fonts, it goes through 10 fonts then goes back to the first one, for instance my fonts start at myrid pro when I boot Illustrator up, I can scroll downward through the next font which is n-gage and thats as far as I can go unless I physically select a diff font with the drop down menu - If I choose a diff font and do the same thing, I get through about 10 fonts if Im lucky then it wont go any further, is this a bug it didnt happen before.

PC, right?
Uncheck "enable missing glyph protection" under your type preferences.
That'll let you get past the damaged font, but the underlying problem is likely as Wade describes.

CS2 to CS4 font issue

Hoping someone can help
I have designed a document using InDesign CS2. I have set all the Paragraph styles up etc
However, when I then transfer the document to a Mac running CS4, the document opens but tells me some of the fonts are missing. If I update the fonts to those on the machine running CS4 the document is OK. But changing the fonts on the CS4 document does not update the fonts on the library of Paragraph Styles I have created. Does anyone know why or whether I'm simply doing something wrong in the transfer process?
Advice would be appreciated!

I don't think there is on CS2 - see grab below of the dialogue box I have...

Missing fonts in InDesign CS4 - even when 'open' in Suitcase Fusion 3

Hi all, I'm running InDesign CS4 on a Intel Mac Pro (tower), about 4 years old, running OSX Snow Leopard (all updates applied).
Using Suitcase Fusion V3 for font management.
I have a document that previously had no font issues at all. Now when I open it InDesign throws up a 'Missing font' error.
I have the correct fonts installed and 'open' in Suitcase Fusion.
The font is available in Simpletext and Pages, but not InDesign and Illustrator.
The troublesome font was OK the other day and has been since it was installed.
I've not changed anything that I'm aware of... but now InDesign won't 'see' the font.
In the 'Find Font' dialogue box the 'Path' says it's 'Unkown or missing'.
InDesign can see the other weights in the font family (bold, italic etc) but not regular. And yet the entire font family is in the same folder on my hard drive.
I've tried deleting all the' Adobe.lst' files. No Joy.
I've run Font Doctor on the whole font family, its says it's OK.
I've tried re-installing the font from a back-up. Nada.
If anyone has any suggestions..... feel free to let rip!
As ever, I await your expertise and unstinting knowledge in these matters And, needless to say, I'll be mighty appreciative for it!
RP

Hi Bob, strangely... I've put the troublesome font, Dax (T1) Regular, in the Applications/Adobe InDesign CS4/Fonts folder and it seems to be working.
Never had to do that before.
Would be great to get back to 'normal'. If possible.
Although I have many duplicates spread across back-up drives and collected artwork folders, I've also tried to eliminate any duplicate 'open' versions. But the above solution is the only one that works at the moment.
RP
p.s. I also tried removing any AdobeFNT**.lst files, (where ** is a number) before the above work around. That didn't work either.

Weird font bug in CS4 with 321impact

Hi,
Being using the font 321Impact for a lot of work in Photoshop etc. works fine. Just come to use the font in InDesign (cs4) but
when ever I type words like 'confidence' or 'finding' the f and i characters disappear! This only happens with the letter combination
fi and fl - this is driving me nuts! The font works perfectly well in everything else and the characters don't disppear. I thought it
was a display issue, but the characters print out missing. Instead of 'confidence' it comes out 'con dence' with the letters missing.
Here's the link to the font:
http://www.fontstock.net/15103/321impact.html
Has anyone one else had a similar problem and knows how to fix it!
Many thanks in advance

The font has no ligature support apparently. Turn them off.
Bob

Missing font issue

Hi
I am currently still using FWCS3
When opening a document, I got the popup warning that a font wasnt installed on my system etc.
But, the font is on my system, I went into the fonts folder in windows and checked.
How can I get FW to recognise the font?
Cheers
Fiona

I've been having similar issues in CS4 not CS3. When I recently opened the CS3 file in CS4, all the fonts got screwed up. I contacted the developer of FontAgent Pro and they were unable to help. It works in CS3. Aside from the horror I have experienced with type, i run into features that are "only available for the PC" . . . even the export icon which worked in CS3 is grayed out now! I haven't tried it yet, but I hope I can save my file back to CS3. I've used Fireworks almost from the beginning, so I am very disappointed. I can't afford to upgrade yet to CS5, but if it's not any better, why bother.
Egads, I've lost two days just trouble shooting.
If someone has a suggestion, I'd appreciate it. I'm on a Mac using OS 10.5.8
I have no problems with Photoshop CS4 or Illustrator CS4 [which still is inferior to Freehand]
Adobe's condemnation of Apple for not allowing Flash on the iPhone is unfounded. If Flash is as buggy as Fireworks, no wonder Apple does not want to to have anything to do with Flash. And what's with PCs having more features then the Mac, and Mac sometimes having to wait a year before they get even get the "features".
Oh yes, there is one feature in Fireworks CS4 I like. The "Photoshop Live Effects," but that was once available in the Macromedia version and got dropped when Adobe bought Macromedia.
Jayef

Font issue with InDesign and OS 10.6

I have read quite a bit on this but have found no resolution. We installed OS 10.6 on two of our three G5 Macs at work. We use InDesign CS4 and OS 10.6.5.
When we open an InDesign file that we all share, the machines with 10.6 on it say fonts are missing. (I believe this is a naming convention problem.) I learned that some of the fonts for InDesign should be moved to the InDesign font folder. We did that. That helped on several of the fonts. However, we still have an issue with Helvetica Neue, and Universe (67 or other numbers). I have the same Universe font family listed, but when I go to find 67 or 47, they aren't there.
Anyone else having this problem? Do we need to go in to every document and change the fonts to avoid this error? Is there a better fix?

I have just swapped from an old Mac Mini (using 10.4.11) to the new Mac Mini (using 10.6.6). I did not do any fiddling about fonts. Everything is as it installs. The only thing I did is to resolve duplicate fonts in Font Book.
For convenience, I used Arial for documents. Now when I open an ID document, it says Arial[TT] (as well as bold, italic...) is missing. I checked the Arial ttf group is in /Library/Fonts, but in ID font list, it shows an Open type.
All I want is that the fonts should work, when I open all the InDesign documents (still in CS2 Version) that I created since last five years. I am no techie by any means, what I need is a step-to-step to solve the font issue, so that I can get on work immediately.
Any concrete step-to-step advice is highly appreciated.

Photoshop CC 2014 font issues

I'm Not entirely sure why this is happening, or what's causing it, but photoshop cc 2014 is causing some serious issues with fonts on my documents. Up until this point my company has used Extensis Suitcase Fusion to activate fonts used throughout our project docs. The 2014 typekit update and addition is somehow conflicting with either photoshop or suitcase and in return setting a large portion of my fonts to it's default or regular weight. It seems like while suitcase is auto activating the necessary fonts, typekit is reading each of those weights as their own individual fonts. This might seem difficult to understand but in any case i would just like to know if there is a way to completely deactivate typekit and or remove it's involvement in my project documents, at this point it is resetting dozens of fonts on some very important project files. I'd much rather not be limited to just the fonts that adobe or typekit prefers.

I still don’t have a clue…
So far we’re the only 2 reporting this
No dia 12/05/2015, às 02:34, abaynoash <[email protected]> escreveu:
Photoshop CC 2014 font issues
created by abaynoash <https://forums.adobe.com/people/abaynoash> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7535637#7535637>
I'm having the same issues and use FontExplorer X. What is the solution?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7535637#7535637 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7535637#7535637
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 94>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

PDF Format Oracle Reports font issue

My process is generating the batch oracle Reports.
Their key map is:
Key1: %* server=server1 userid=xxxs/xxx@xxxx report=D:\sample.rdf destype=file desformat=PDF
My process is calling IAS server to generate report. IAS ser is generating and saving the report in the specified location.Reports are running on the server locally and DESTYPE=FILE. So the Oracle Reports output is saved on the server itself. Whenever i open the report on my machine/server i have font issue. Some of the reports has very tiny font. It seems the reports generated by using oracle reports which is Arial Unicode font type is causing the problem. If any reports other then Arial Unicode font like Arial Westrn, those reports are fine. We have 1000s of reports. So we don't want to change each report font type. For me it seems the issue is with the font on the server. Is there anyway to ask App server use Arial Westrn if Arial Unicode not found. How to make these configuration changes in the server. Any suggestions please.

Maybe this helps or at least points you in some direction ...
Have a look at font aliasing when configuring Application Server : http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_font.htm#i1006140
If your Application Server is located on Windows I would suggest to install the fonts there.
In Unix, this a more complex task.

Font issue between Reports Designer and Report Output

Hi.
I've succesfully migrated several reports from 6i to 10g (10.1.2.0.2) with and without parameter form. However, I have the following font issue:
- When report is run from Reports Designer, font is kept.
- When report is run from a forms module (through rwserver on the same machine, that is not really from an application server, but using Oracle BC4J or Developer Suite enviroment) the report output is different. In this case a bigger font is displayed and occasional truncation happens for some fields.
The question is: How can i avoid this difference in font behaviour?. Is it font.ali related?. How come this happen on the same machine(Windows XP)? These reports are to be deployed on Linux, where reasonably, and font machine is expected to happen.
Font used: Arial (Occidental) 9

this might be an issue with the printer that is associated also, and the permissions to the printer that you might have..
login to the application server machine and restart the reports server as an admin..try running the reports via the URL..i have a feeling that this issue might be somethiing to do with the permission(s) to the printer from your AS machine

ICal Print List Hang / Font Issue / Sync Problems...

Okay, here's a couple issues all wrapped up into one thread/post - reason is cause I suspect they may all be tied together somehow, but am not sure.
Sync Problems...
Regarding the Syncing problems, you can find an ongoing thread about @ http://forums.markspace.com/viewtopic.php?t=1632
In short, some of us are having issues with events syncing to our Palm to the wrong timezone, causing them to be an hour off (usually within the new & old DST date change). Yes, all the usual fixes have been tried - pls read the thread noting "adairnet" and ymatto" postings.
Also, in addition to this time issue, I have iCal events that I've deleted in iCal still show up on the Palm after one-way syncing!
Print List Hang...
Every week I print a "list" of events from a certain calendar. The past couple weeks I noticed some lines in the notes field printing on top of each other. Twas odd indeed, but I hadn't had the time to look into the reason. Then this week I was going thru my usual printing proceedure and now iCal locks up, hangs up, crashes, forcing me to force-quit the program. It's usually after I extend the dates beyond 2 or 3 days, but I've not been able to find a consistency. I've redone events thinking they were corrupt with no success.
Font Problems...
After the Print List issue above, I opened my Console program to see if it was reporting anything. At first it indicated that it could not find Helvetica Neue and would substitute it for Helvetica. This put me in touch with some font corruption - so I got rid of those bad fonts and activated Helvetica Neue which got rid of that message. But made me wonder if there are more font problems causing the print hanging & syncing problems. I have FontAgent Pro and do have some font issues that I'm trying to work out.
But the Console is displaying another string of messages every time the Print List proceedure hangs up which I cannot figure out...
2007-04-24 16:24:54.151 iCal[28975] NSATSGlyphStorage inconsistency. Cannot find run storage for character range {138 67} for CTRun 0xDBE87D0. Ignoring the run...
2007-04-24 16:24:55.175 iCal[28975] -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:] called with out-of-bounds range. For apps linked on Tiger this will raise an exception. For earlier apps it will produce this one-time warning and continue with existing behavior (which is undefined).
2007-04-24 16:24:55.176 iCal[28975] * NSThread: ignoring exception '* -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:]: Range or index out of bounds' that raised during delayed perform of target 0xdde58d0 and selector 'renderPreview'
So, all of this is causing me to wonder if the iCal or SyncServices database is corrupt. Is there a way to dig into the iCal db and check for corruption &/or fix it?
Or does anybody have any further suggestions on any of these issues?
thanx.jason.

RedKamel,
The SyncServices folder should be avoided like "a swarm of bees". This article discusses some of the issues that can arise when the SyncServices folder is deleted or modified:
http://docs.info.apple.com/article.html?artnum=301920
Data loss and Data corruption can result from deleting or modifying the SyncServices folder, and that data loss or corruption can be propogated to devices, .Mac, and other applications that sync with SyncServices.
If you have isolated an issue with the other steps in your post, I would recomend speaking with AppleCare before removing that folder.
Hope this helps,
Nathan C.

Acrobat 7 Pro - Comment Summary Font Issue

We have a situation involving font usage in comments in Acrobat 7 Pro that I hope someone can shed some light on. It will be some time before we can move to version 8 or 9, so the problem is important to us.
Here's the symptom, then I have a few basic background questions. The text in a Note comment includes a 'less than or equal to' symbol which appears correctly. The problem comes when the comments are summarized to a PDF file or printed. The 'equal to' portion has now disappeared! I first thought that this might be a font issue, but now am unsure.
My basic questions are:
What font is Acrobat using when a comment is created? I realize that you can set a preference for which font to use when viewing comments, but apparently not when creating them?
When a comment summary is created to a PDF file, what determines which font is used in the summary? We have seen cases where the resulting PDF has used Arial or Tahoma or SimSun or.........
We have had at least one situation where opening the same Acrobat 7 PDF in Acrobat 8 Pro did not exhibit the problem when summarized there. Was this a known issue that was repaired in Acrobat 8?
Thanks much for any information you can provide.

Hi David,
This is a known issue with Acrobat on Mac.
Please follow the steps mentioned in the KB : http://helpx.adobe.com/acrobat/kb/blank-eula-screen-appears-acrobat.html

Touch-up tool causes font issue in Acrobat 9 and X

While I edit text using the Edit Document Text tool (formerly TouchUp Text) the font style are getting changed, for example If i select the Uppercase style text using Document Text Tool after exit the selection and trying to save as the doucment some characters with in the text changed into lower case. In Acrobat 7 and 8 the TouchUp Text tool works fine. Please suggest a solution to get rid of this issue in 9 pro and X pro.

Hi LoriAUC,
I have attached the screenshots for your reference, How I selected the text and what the problem was occur in the pdf files. Actually this is pdf file which is exported from InDesign as per customer provided export settings. if I change 100% of subset fonts in that export settings(See the screenshots below) I can get rid of the font issues in Acrobat 9 and X pro but I am not supposed do any changes in that settings.
If you want check/analyze the problematic pdf file I can send it as an attachement to your mail ID? if so please let me know your mail ID.
Please let me know if you need any other details or questions to be clarified regrading this.
Thanks for your support.

Issues With CS4 Installation on Win 8?

I purchased CS4 (Web Premium) on disc several years ago, and it has been working fine on my Win XP computer ever since. The Adobe software has all the current updates, though I am using the CS4 version of Acrobat Pro (9.xx) rather than a more recent (free) version of Reader.,
Unfortunately, my computer's hard drive has fried, and I just purchased a new Windows 8 machine, which will arrive shortly. I am trying to determine:
1. Are there any general issues with CS4 installation on Win 8 that I should know about in advance?
2. Are there specific procedures (de-activation?) that I need to follow BEFORE attempting the installation on the new computer?
3. Other than specific user issues, are there problems with CS4 versus Windows 8 that I would not encounter with Windows 7.
I enhance photos and create web sites for a living, so the CS4 installation is mission-critical. I am hoping I did not make a mistake in ordering a Win 8 machine...
Thanks for any and all insights.

OK, fair enough. Maybe someone who has actually experienced this situation (CS4 --> Win 8 machine) might see this and offer some tips to avoid hassles. But I will try the install as soon as I get the new machine and post any ensuing issues/problems here.
As for de-activation of the previous installation on the XP machine, that is now impossible, as the hard-drive is fried. Unless there is a way to de-activate an installation some other way (without actually opening the programs). That said, I AM able to access files on the fried harddrive, so if there is a specific file that controls de-activation, I could access it on the old machine. However, I may not be able to actually RUN said file on that machine, but can copy it to a stick and move it elsewhere. So, any thoughts on deactivation of an installation on a deceased computer?

Multi-monitor issue with CS4?

Hi; I'm running a Mac with the following specs:
3 x 30" ACD
MacPro 2,8 Ghz Quad
2x ATI Radon 2600 XT graphics cards (2 screens attached to 1 card; 1 screen to the other card)
I've encountered after the switch from CS3 to CS4 the following issue:
Whenever I try to use the new Bridge Review function using one of the the screens sharing one graphics card I just get a grey screen.
If I move the bridge window to the solely attached screen it works.
Is that an issue of CS4 or is just the throughput of the second graCard providing 2 monitors not sufficient.
Thanks t.

T,
There are known issues with using more than one graphics card which Apple has not truly resolved. You may want to browse some of the threads in the Adobe Photoshop Macintosh forum.
In addition, you should know that Photoshop and Bridge cannot really take advantage of more than one graphic card.
http://forums.adobe.com/message/1540485#1540485
This bit of information in relation to GPU and OpenGL features and
limitations in Photoshop CS4 had totally escaped me until now. Though
it doesn't affect my setup, it might be of interest to others who may
have missed it too.
Excerpt from
http://www.adobe.com/go/kb404898
Q. Does Photoshop take advantage of dual-GPU display cards?
A. Not at this time.
Q. Why can't Photoshop take advantage of more than one display card?
A. When you move an image window between two monitors that are
each on a separate display card, the GPU attached to the second monitor
does not have access to the data necessary to accelerate drawing. The
SLI and Crossfire technologies that use more than one GPU to speed up
full-screen games will not work with Photoshop, because their use is
limited by design to accelerate only full-screen games.

Font issue in CS4

Similar Messages

Maybe you are looking for