FONT ISSUES: Fonts work perfectly in Indesign 5.5 but not when dragged into CC.

When I open a file using Indesign 5.5, it is absolutely perfect. When I drag it to Indesign CC, it tells me that there are fonts missing. Then I cannot update those fonts because they dont appear. My font management software (Suitcase Fusion) is completely up to date. It has become a big problem for us.
Thanks!

Problem solved. Thanks Ken Rice, tht obviously helped.
Peter, yes, we had checked that yesterday, thanks.
Willi, That was plan b according to Adobe support. I'm pretty sure that packaging the file while in 5.5, then opening in CC would have worked.
Plan A (from Adobe support) worked which was copying the necessary fonts from the system (or from packaging the file in 5.5), into The fonts foler located in "Applications-->Adobe InDesign CC-->Fonts".
Thanks all for your help!

Similar Messages

VI Works Single Step at a Time, But Not When Run Normally

I'm very new to LabView and have created a simple VI to record a single measurement from my HP 34401A Multimeter over an RS 232 connection.
The problem that I'm having is that the VI only works when I run it a single step at a time (clicking the single step button until it's completed). When I try to run the entire thing though, I get the following error:
Error -1073807339 occurred at VISA Read in Untitled 2
Possible reason(s):
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
After reading through the help page for that error, I tried adding a time delay, but that did not fix the problem.
(http://digital.ni.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0)
NI I/O Trace didn't provide any answers for me, but I've attached a shot. Lines 1-13 are from the single step run, the rest are from attempting to run the entire thing at once.
Can anyone please help me understand what's going on here? Thanks in advance!
If anyone is interested:
Windows 7
LabVIEW 2009
HP 34401A Multimeter
RS 232 connection is through a USB-Serial adapter
Solved!
Go to Solution.
Attachments:
Front Panel and Block Diagram.png ‏112 KB
NI IO Trace.png ‏91 KB

The only thing I can think of is that you are sending the remote command and then not waiting long enough for it to complete. The manual states:
It is very important that you send the
SYSTem:REMote command
to place the multimeter in the remote mode. Sending or receiving data
over the RS-232 interface when not configured for remote operation can
cause unpredictable results.
And I think we are experiencing unpredictable results.
i don't know if you can change the command into a query by using the *OPC? command, but using that could solve it - or we could run into the same issue because of the caveat mentioned above. Maybe you have to put a manual wait in between the remote command and the write command.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

SQL Query Works in MS SQL Server 2008 but not when using Database Toolkit

I have this SQL query:
DECLARE @DataTypeTable TABLE (
Name varchar(128),
TypeID INT)
--Add comma delimeted data type names to temp table
INSERT INTO @DataTypeTable (Name)
SELECT * FROM WhatWeShouldDoRead.func_Split(@DataTypeTrimmed,',')
SELECT Name FROM @DataTypeTable
Which takes a comma delimited string and returns the string as a table. It works correctly in Microsoft SQL Server Management Studio. When I run this as a stored procedure I get back nothing. There are no errors, SQL or otherwise. I've verified that I am connected to the correct database and that the stored procedure is loaded by changing the no error string that is reported from this stored procedure (that code is not shown in the above example). Has anyone seen this problem before, or have any experiance with SQL/Labview interfaces to tell me what I'm doing wrong?
Thanks in advance.
Solved!
Go to Solution.

After doing some more research it appears that the database toolkit cannot interface with any table results from any type of temp table. It may have to do with the fact that MS SQL 2008 stores temp tables in a seperate database (tempdb) and not the database you are currently connected to. See this link for a good artical on temp tables:
http://databases.aspfaq.com/database/should-i-use-a-temp-table-or-a-table-variable.html
If possible, I'd like a someone to prove me wrong, but for now will have to settle for exporting the contents of a temp table through a string.

Weird: Backup file works fine from the network but not when moved into sandbox environment

We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've
tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move
the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
Any thoughts? Has anyone seen this before? Any idea? TIA,
Raphael
rferreira

Original server that generated the .bak file:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64)
Jun 11 2012 16:41:53
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server where I CAN restore the .bak file from the network location (not inside the sandbox):
Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server inside the sandbox where I get the error when attempting to restore the backup:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64) Jun 11 2012 16:41:53 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
rferreira

Issues with duplicate IDs - maybe a MyFaces problem but not sure

I've been having a heap of trouble getting the DataScroller object working. It simply refuses to allow me to have facets. It works perfectly fine in the examples but not in my page. I'd really appreciate it if anyone can help me out. This thing has been bothering me for days.
I'm new to JSF so any other hints about how I should write it would be nice for future reference. You know, things like "you should make sure these tags are before these ones" and that.
The code that causes the error (messages.jsp):
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<f:view>
<HTML>
<HEAD><TITLE>Some thing</TITLE>
<BODY>
<CENTER>
    <h:panelGroup id="group">
        <h:panelGrid columns="1" id="grid">
        <t:dataTable id="messagedata"
                var="message"
                value="#{listMessage.messages}"
                rows="10">
           <t:column>
               <f:facet name="header">
            <h:outputText value="Time Transferred" />
               </f:facet>
               <h:outputText value="#{message.timeTransferred}" />
           </t:column>
           <t:column>
               <f:facet name="header">
            <h:outputText value="Purpose" />
               </f:facet>
               <h:outputText value="#{message.actionPerformed}" />
           </t:column>
        </t:dataTable>
            <t:dataScroller id="scrollnice"
                    for="messagedata"
                    fastStep="10"
                    pageCountVar="pageCount"
                    pageIndexVar="pageIndex"
                    paginator="true"
                    paginatorMaxPages="9"
                    paginatorActiveColumnStyle="font-weight:bold;">
                <f:facet name="first" >
                    <t:graphicImage id="theproblem" url="images/arrow-first.gif" border="1" />
                </f:facet>
            </t:dataScroller>
        </h:panelGrid>
    </h:panelGroup>
</CENTER>
</BODY>
</HTML>
</f:view>and the error page:
exception
javax.servlet.ServletException: Client-id : theproblem is duplicated in the faces tree.
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:109)
     org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:112)
root cause
java.lang.IllegalStateException: Client-id : theproblem is duplicated in the faces tree.
     org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:241)
     org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
     org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
     org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
     org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
     org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
     org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedView(JspStateManagerImpl.java:204)
     org.apache.myfaces.taglib.core.ViewTag.doEndTag(ViewTag.java:122)
     org.apache.jsp.messages_jsp._jspx_meth_f_view_0(org.apache.jsp.messages_jsp:132)
     org.apache.jsp.messages_jsp._jspService(org.apache.jsp.messages_jsp:81)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:415)
     org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:234)
     org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:300)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:95)
     org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:112)Thanks in advance for any help.

Emilio Corsetti wrote:
Ben,
That was the problem. The link is live now and you can see the poorly positioned spry menu in all its glory.
Thanks,
Emilio
http://www.emiliocorsetti.com/publish/two_column.html
You don't say what you want to change.
If I were styling your menu I would have it vertically centered in the grey background. By adding the red coloured rule found in layout.css
#menu (line 61)
background-image: url("../Images/Layout/nav_bg.jpg");
background-repeat: repeat-x;
background-position: left top;
width: 960px;
height: 40px;
padding-top: 10px; // or whatever suits
I would also like to have the menu items spread evenly across the page by applying the style rule found in SpryMenuBarHorizontal.css
ul.MenuBarHorizontal li
     margin: 0;
     padding: 0;
     list-style-type: none;
     font-size: 100%;
     position: relative;
     cursor: pointer;
     width: 20%; // 5 items X 20% = 100%
     float: left;
You may have to fiddle a bit more after this to get it exactly the way you want. Just start a new topic because this one has already been answered.
Happy Sprying.
Ben

Font issue in exported PDF from indesign

Font issue in exported PDF from indesign:
In Indesign file we have kept a sentence in “Univers LT Std” (San serif font) with all caps style that was orginally in lower case. Refer below
When we selected the sentence in exported PDF some of the characters are not selected. Refer below.
If we enable “create tagged PDF“ in export PDF setting, then the problem is solved. Refer below.
Can you please check why this problem happened? In another project also we have faced this same problem but different font “Frutiger LT Std” with all caps style. Here also same San serif font. Please check and advise to solve this issue permanently.

Without tags a PDF is a silly amount of letters, images and lines, with tags all itams a kept in their semantic context. So work with tags as it is the only way to get correct selections and export to other file types like Word DOCX.
Without tags InDesign reads from left to right from top to bottom and the font geometry might influence the correct order of letters.
Why should anyone work without tags today? If you open a tagged PDF in Acrobat DC it is much faster than without tags.

TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I want to update to LION,on my Macbook Pro duo core, (october 2006) because Adobe CC needs at least that. I know my computer is old, but works perfect to me and I do not want to stay in Adobe CS6 since I have access to Adobe Cloud CC. Please help.

I want to update to LION,on my Macbook Pro CORE 2 DUO, (october 2006) because Adobe CC needs at least that. I know my computer is old, but works perfect to me and I do not want to stay in Adobe CS6 since I have access to Adobe Cloud CC. Please help.
I probably dont want to go to Mountain Lion either because I've heard that it will slow down my computer, So, Lion 10.7 will be the perfect OS X for me.
I have ne newest release of Snow Leopard installed and works great.
Thank you ALL for your help.

you will be ok updating to the new software but there will be some trade off. i have 3 macbooks 2006 that are all running the latest versions.
some of the trade off are
1-2 less of battery life
slow wake ups from sleep
slower start up time about 30-40 seconds longer then what you have now
the operating system will use high % of your processer while idealing
these are not the things you want to hear about a new os compared to the old one but this is how it is even with a new macbook pro. but it's not the end of the world. just make sure you have at least more then 2GB of ram and have a good harddrive and you will be ok.

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an er

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an error appears on the pages with video content?

its in german:
der Vorgang könnte nicht abgeschlossen werden.
something like the process coundnt be completed

Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

Question # 1 is what do you mean by "inherited"? Is this a case where the computer belonged to someone else? Your user would not be entitled to use a program licensed to someone else.

Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
Rajesh

See this discussion...
https://discussions.apple.com/message/23731048#23731048

I have a tool in window8 its work perfect in all other windows but its show some error in windows8

i have a tool in window8 its work perfect in all other windows but its show some error in windows8
in all other windows its hows all screens nd sound
but in wondows8 its miss 3 screens nd sound its blank screen appear in windows8

after installing this the error appeared
run time error 372
failed to load cntrol 'shockwavectl' from cntroll.dll
'From: [email protected]
To: [email protected]
Subject: RE: i have a tool in window8 its work perfect in all other windows but its show some error in windows8

HTML video works but not when publishing in MUSE

I threw this together without using MUSE - Just a test video that I made in Dreamweaver. The reason why I'm posting this in MUSE as well as DW forum is because maybe I'm not doing the "5" code correctly. anyway --:
http://designerandpublisher.com/html5/video.html
the HTML5 video above plays great on my desktop as well as on my mobile device.
So now, I opened up MUSE and made a test phone web page. I embedded the necessary HTML5 code. The video plays fine on my desktop but will not play at all on my mobile device (Galaxy Note ii). It seems to start, then freezes, then craps out. Here it is:
http://designerandpublisher.com/hawaii/mobile/
What I can't understand is why am I am all of a sudden having problems with MUSE playing video files made for mobile when the original DW test I made works perfectly?
Please advise.

the OGV and WEBM files work fine in the first test. those files are also present in the 2nd test, so why isn't the 2nd playing like like the first one? as for the FLV that's something i can do for mozilla but my main concern is the playback issue with the MUSE test - all works fine in the first example but not in the second.

4th generation iPod Shuffle works on one PC (Windows 7) but not another.

Hi all.
My issue with the 4th gen shuffle is pretty strange, at least, from what I've read here on the forums already. My sister recieved one as a christmas present just this past year (Happy New Year, all!), and as I am the family's tech guy, I was given the task of configuring it for her use and whatnot, as she is younger.
Having owned a shuffle myself, I figured it wouldn't be all that difficult.
At first I ran into the issue of not plugging the USB cord in all the way, but being the computer-geek I am, I recognized the symptoms fairly quickly and noticed the eighth of an inch of plug still sticking out of the little hole.
Interesting, interesting. So now it was plugged in properly.. but iTunes was immediately saying it was corrupted. So, not too bad, just click restore, right?.. wrong.
The restore hangs. I google the issue. A lot of people suggest reinstalling iTunes and whatnot.. attempting a format on the iPod itself to make sure it's in Windows format.
I try many many things on this PC, only to wind up plugging the thing into another Windows 7 PC. The only difference between the two is that the other PC is running 64 bit Windows 7 as opposed to 32 bit. Strangely enough, however, the iPod functions and works perfectly on one computer and does not get recognized by Windows as a disk drive or a mountable partition on the original PC.
I discovered today that the motherboard drivers for the original PC weren't properly installed by visiting nVidia's site.. but this didn't help the problem. I also attempted to restart all of Apple's iPod services through Windows, as well as to reinstall iTunes multiple times. I disabled basically all other services running on the computer, turned off Avast antiVirus, etc.
I did try several different USB ports as well. Front ports, back ports, even the installed memory card reader has a USB port that I attempted to use to connect the iPod.. all to no avail.
The only thing I can honestly guess at this point, is, that there is some other conflicting service or background process that is totally preventing the iPod from properly being recognized by Windows, especially as multiple driver reinstalls / restarts do absolutely nothing to solve the issue. I also find it very odd that iTunes will recognize the iPod as being plugged in, but consider it corrupted despite the fact that it runs just fine on the other PC. Perhaps the major difference is, in fact, the 64 bit OS? I also find it odd, indeed, that despite it showing up in iTunes as a corrupted iPod, when I click the diagnostics button under the help menu in iTunes, it will say there is no iPod plugged in.
I am really just confused and dumbstruck by all of this, and regardless, my sister's christmas present is currently nothing more than a pink clip on button.
Please note that I have tried or looked into most if not all of the support pages pertaining to this issue. I am very much hoping there is something simple I've overlooked, or that there is some specific order in which things must be done in order to properly force Windows to recognize the device (like it does so easily with so many other devices..).

There is a USB printer connected to the back port of the PC. The mouse and keyboard are both PS/2.
I did attempt to reinstall the USB root drivers. After uninstalling iTunes and all the other apple software packages included, I uninstalled everything USB in Device Manager, then rebooted the PC to let Windows reinstall it all.
Reinstalling the OS -might- fix the issue, but if that were the case, it's most likely just a software conflict that can easily be fixed if I can manage to narrow the specific conflicts down. I've already essentially disabled everything with MSCONFIG except for Apple stuff, so I'm at a loss as to where to go. I've attempted the 5 Rs and all that as well, none of it seems to do the trick. I also cleared the temp folder multiple times (once per each iTunes uninstall / reinstall following the support site directions of uninstalling all the extra apple software) as well as attempted restarts of the Apple services.
One oddity I would like to point out is that if I attempt to restart the iPod service through services.msc, it will not restart. It throws the error message of "the service failed to respond in a timely fashion" or whatever. I instead have to use the windows Task Manager to manually kill the iPod process in the processes list.
I just now removed the USB printer and plugged the shuffle into the same port, but I receive the same error message in iTunes about the iPod being corrupted and it needing a restore. If I push restore, the software gets stuck in an endless loop. There are no other USB devices attached to this computer, the motherboard drivers are fully up to date from nVidia's website, and other USB devices clearly function just fine (USB memory sticks, USB printer, etc). If I use the Diagnostics option under Help in iTunes, it will claim there is no iPod connected, and, again, the iPod still does not show up in Windows Explorer under My Computer as an attached device, nor does it show up in Disk Management as a mounted partition.

FONT ISSUES: Fonts work perfectly in Indesign 5.5 but not when dragged into CC.

Similar Messages

Maybe you are looking for