Font management (export and default)

How do I see which fonts my keynote 09 presentation uses? It's easy to use 'Replace fonts' to do this in PPT. This is obviously essential so I can be sure that the computer I'm doing the presentation on has the right fonts installed before I get there.
Also, how can I change the default font for every presentation I build? I hate Gill Sans. I'd like it to default to Myriad Pro, regardless of whether I use a theme.

Well, this is messy.
The easy way is to just change it manually on every master slide and save it as a new theme. The problem with that is you won't get every instance (such as chart labels and other things that are hidden).
The hard way is to edit the xml file in the .key or theme file. This is what I do when I'm making a new theme and I want to change the font. I open the xml file in TextEdit or TextWrangler and do find/replace for each font I find. The harder part is, you have to get it right. Sometimes I'll replace stuff manual in Keynote first so I have the code for my NEW fonts in the xml also. Then I look for each one and replace only the old stuff.
I know that's not much help, but if you're brave and make copies of your files, it's not really that bad. The xml file (called index.apxl) is INSIDE the .key package (which is also an issue in 09, see below) and it's usually compressed. You can safely double click the compressed file and delete that one, leaving the uncompressed version.
Regarding the package format, see this article on my site:
http://www.keynoteuser.com/2009/01/07/what-happened-to-the-package-format/
If you unzip a .key file, the xml file will already be uncompressed and ready to go.
DIsclosure: I do sell stuff on Keynoteuser.com, but you don't have to buy anything to read the articles

Similar Messages

Invalid signature when trying to install Photoshop CC extension using the Adobe Extension Manager CC and default installed Photoshop CC extensions won't load

I have a Creative Cloud subscription for Photoshop CC. All Creative Clouds products are updated to the latest versions. When I tried to install Tony Kuyper's TKActionv3 Photoshop extension using the Adobe Extension Manager CC on my PC desktop, I received an error message that the extension contained an invalid signature and wouldn't be installed. I had previously installed the extension on my laptop without any problems. At the same time, I also noticed the default installed Photoshop CC extensions (e.g., Adobe Exchange, Kuler, Mini Bridge, Behance) could not be loaded using the Windows/Extension command. I receive an error message that the command could not be completed because the extension could not be loaded. After contacting Tony Kuyper, he suggested that I try the steps mentioned in the following weblink: https://forums.adobe.com/message/6029768. The steps basically consist of uninstalling and reinstalling all the Creative Cloud apps associated with Photoshop CC. I tried the steps multiple times, but I am still having the same problems. I can find the default installed Photoshop CC extensions on my machine, so I don't know why they can't be loaded.
Thanks for your assistance,
Mark Curtis

Hi Mark
You say everything is up to date? And you have tried reinstalling all the CC apps? Is Windows also fully up to date? Hmmm... That could be tricky.
What version of Windows are you using? Have a look in Task Manager > Processes and see if 'CEPServiceManager.exe *32' is listed as running?
If not, I don't know where it would be installed from, and we'd need someone like Chris Cox to join the thread to tell us, but my guess is that it would install along with the CC Desktop Application Manager. Windows 8.1 can be problematic, and a bit fussy about the order of things, and it is definitely worth adopting best practice when installing your CC apps. That means restarting your computer, and right clicking the Desktop Application manager and running as Administrator.
How many CC apps are you running? If just Photoshop, Bridge, Expansion manager etc. then - and I hate to say this - perhaps have another go at reinstalling, but run the Cleaning tool after uninstalling.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Try some other Extensions before the Tony Kuyper's TKActionv3. GuideGuide is a favourite of mine, as well as Dmonzon tools, and maybe Russell Brown's Flypaper Textures.
I have to say that I have had problems with the CC Extension Manager a while back, but simply reinstalling just the Extension Manager fixed it. Perhaps CEPServiceManager.exe *32 installs with Extension Manager? Heck, maybe start with just trying that before reinstalling all your CC apps.
If you are still stuck, I'd risk sending Chris Cox a PM, but not until you triple check that your video card driver is up to date from the card maker's website.
Good luck, and be sure to let us know how you get on.

PC Font Management, CS4 and Windows 7

I have a new PC.
Starting from scratch I had Windows Vista 64 installed as this was just before the Microsnot launch of Windows 7. I bought CS4 Design Premium and had this pre-loaded. I downloaded Extensis Font Fusion 2 and loaded that. After loading this I had issues with Illustrator crashing and also Indesign and Flash. Also Photoshop 64 pretty much wouldn't work at all. I removed Font Fusion2 and found the Adobe products were less flakey but still not solid. I then upgraded Windows to V7 64bit. This also improved matters though PS64 still wasn't 100% stable.I called extensis and they said that they had released a version that answered this issue, but since loading the latest version of Suitcase Fusion 2 Illustrator has become very much less stable and also PS64 is now unusable, which is a bit of a shag as I have paid to have 12 gB of ram in this machine which is only used by the 64bit apps.
I have called Adobe technical who were pretty unhelpful.
Has anyone found a good type manager for under £100 that actually works with Adobe CS4?

If you're working on a stand-alone machine, why not trying to work without font management?
I worked with suitcase 11, and all went fine. (running on xp64).
Since we're in a network, we opted for universal type server and client, both working well. I'm sure that on the web the're several free managers can be found

Win7 font manager utils and FM

Any recommendations for dealing with fonts on Win 7, or font manager utils that you particularly like, that presumably will play nice with FM and be considerate of some elderly Type 1 fonts too?
On a newly imaged system I just can't bring myself to dump fonts into the Windows/Fonts directory, it just goes sooooo far against the grain. I've tried, I really have tried. I just can't stand dumping all my prized fonts into the same directory as the 6-million-MSOffice-font-collection, it makes me crazy, I need more control. As far as I've been able to find out the only way to use separate directories is to use a manager util.
Also, about the Type 1 fonts, anybody tried creating PFMs using this:
http://www.proximasoftware.com/afmtopfm
Some of the utils I've got on the shortlist are:
http://www.high-logic.com/maintype.html
http://www.proximasoftware.com/fontexpert/
http://www.typophile.com/node/71603
Font Runner
http://www.ampsoft.net/utilities/FontViewer.php
Sheila

Actually, you certainly can install fonts from private directories and not use a so-called “font manager.” Right-click the .PFM file wherever it is located and use the Install as shortcut option. This installs the font without moving the .PFM and .PFB files from where they are located. Of course, whatever directory those font files are actually should always be available (i.e., not on some external drive or network share).
The problem using “font managers” is that they often do not integrate will with Adobe software which effectively manages fonts internally. InDesign does provide an external hook for such third party “font managers” to work with InDesign (and its use of Adobe's internal CoolType module). I do not believe that FrameMaker provides any such support.
My personal recommendation is to avoid “font managers” like the plague, but to organize your fonts in a reasonable directory structure and install them via the Install as shortcut method.
- Dov

Order Management - 'Export' and 'Non-export' orders.

Hi,
Could anyone help me how to distinguish between an 'export' type sales order and a 'non-export' type sales order?
I need the details of the columns that we should be looking into to identify the above types of sales orders.
Thanks and Regards,
Mantha

The reason the stock is released to warehouse is because requested quantity is set to zero so the seeded process fails on reservation so the cycle exits in limbo.
The solution is to rather leave the requested quantity and set the stock Available to Request (ATR) to zero.
Tracing through the packages yields...
WSH_PICK_LIST.RELEASE_BATCH
|--> INV_PICK_RELEASE_PUB.PICK_RELEASE
|--> INV_PICK_RELEASE_PVT.PROCESS_LINE
|--> ..PROCESS_RESERVATIONS
... which is where the ATR is set via INV_QUANTITY_TREE_PUB and can thus be "hacked".
A functional solution is to perhaps have two logical warehouses. One for any packing unit and one for cartonised packing units. But then again not all business' can see there way clear with vanilla functionality ;)
G

Font size changes between Export and Import

Captivate v5.5
My office in Germany is translating existing project from English to German.
They export a slide from v5.5 to be translated (in Word)...make the required translation and then import it back into Captivate v5.5
Problem is the original font size when exported is Tahoma Regular 11 but when the translated document is imported it arrives back in Captivate as Tahoma Regular 10.
The font size during and after the translation is Tahoma Regular 11. The change to size 10 is happening during the import into Captivate v5.5
Any ideas why and how to make sure the font keeps the same size (11 in this case) when imported ?
Noel

Auto Rescale Captions in the CP - file
I always turn it off by default, but turn it on when having to import translated captions:
Lilybiri

Exported SCSM Default ServiceManager.RunbookActivity.Configuration Sealed management pack but unable to import later

Hi,
I exported SCSM default ServiceManager.RunbookActivity.Configuration Sealed management pack and remove it from SCSM. Later when I tried to import back the xml file it shows me this error.
Is there anyway to reinstate the original Sealed management pack?
Thanks
Jeron@Microsoft Technet

This error message is often related to missing the tag ManagementPublicKeyToken within the category tag. If you seal a MP but without defined the token then Service Manager will complain like this. And obviously the token and key must match.
What happens if you insert your keytoken value into the MP, seal it with your own key and then import it?
Somewhat like below:
<Categories>
<Category>
<ManagementPackVersion>xxx</ManagementPackVersion>
<ManagementPublicKeyToken>tokenhere</ManagementPublicKeyToken>
</Category>
http://codebeaver.blogspot.dk/

My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

VRF , Management access only and default gateway

Hello
I am preparing (3) new devices to become my new WAN. The topology looks like,
                 ASR1002x - Has management int and dg for remote access.
                                     Also has DG to WAN ISP via BGP
                 3750x stack - Has management int and dg for remote access. (ip vrf management 0.0.0.0 0.0.0.0 (Management vlan hsrp ip))
                                       Also has DG to ASR hsrp - which causes the Management access to drop.
                 ASA5545x - Has management int and dg for remote access.
                                      Also has DG to ASR hsrp - which causes the Management access to drop.
I MUST KEEP THESE NEW DEVICES OFF THE PRODUCTION NETWORK TO AVOID ANY POSSIBLE ROUTING ISSUES.
I have implemented unique EIGRP instances between the new devices.
These new devices have a management interface so I can access them remotely. I configured the default gateway pointing to the HSRP of the management Vlan and I have remote access.
Obviously I cannot have (2) default gateways out different interfaces, without assigning one with higher admin.
What should my management default gateway look like so I can have remote access to the device and still have the WAN/LAN routing work as needed??

found another thread with some suggestions, maybe it helps at the moment.
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=6000

Font management with InDesign and Windows 7

Hello
I am presently looking to upgrade to Windows 7 and use InDesign CS4. I have had a play with installing postscript type 1 fonts using the windows font manager and it seems absoloutley average, but it worked (I think). I was wondering if you had any suggestions of what would be best practice in this setup.
Thanks for your time

Thanks for that. I spoke to the team using indesign and they would love to move to Extensis Suitcase but they had experienced problems with MathMagic pro. I am going to test this out and hopefully resolve it but I wondered if you had any knowledge of compatibility issues?
Thanks again

Selective member import/export using dllexport and default constructor

We can only export some methods in the class(https://msdn.microsoft.com/es-es/library/8d7d1303-b9e9-47ca-96cc-67bf444a08a9%28v=vs.100%29)
What if we export only some methods in the class and not exported the default constructor(Will it get generated by the compiler in external app which use this dll?).The class may have some private data member as well which are not exposed in the published
header file(Which we distribute with DLL).
How the memory gets allocated to those private data members which are not exposed as the default constructor is not exported?
Niranjan

We can only export some methods in the class(https://msdn.microsoft.com/es-es/library/8d7d1303-b9e9-47ca-96cc-67bf444a08a9%28v=vs.100%29)
What if we export only some methods in the class and not exported the default constructor(Will it get generated by the compiler in external app which use this dll?).The class may have some private data member as well which are not exposed in the published
header file(Which we distribute with DLL).
How the memory gets allocated to those private data members which are not exposed as the default constructor is not exported?
Niranjan

User Experience with CS/CS2 fonts and font management

Im just ordered a 2.0MBP and am wondering about other user's experience with the MBP and CS or CS2 running in Rosetta as well as font management. I know there are lots of post about Adobe and Rosetta, but no cohesive forums describing what most user's experiences have been- both good and bad.
I plan on running CS (all apps except Version Cue) as i will wait for CS3 and skip over CS2. For fonts im currently running FontExplorer X and plan on continuing.
Id love to hear what Adobe software is working well (or not), what font management you are using and what system.
15inch G4Ti-Book, G5 Quad, MBP 2.0 (ordered) Mac OS X (10.4.5)

So im curious, out of these applications i have installed will any of them install anything into the MacHD>Users>Applenewton>Library>Fonts Folder?
I have installed:
Adobe CS2
Macromedia Studio 8
Microsoft Office 2004
iknow those apps have their own fonts they use to work with their programs
i just want to know what would be safe to move around or remove period from my user font library.
i dont mean to sound redundant but i spaced out/forgot how i originally organized my fonts i know i added certain fonts to my font folder in my user's library font folder but cant recall if i added arial/verdana and some other fonts.
is there to check what apps depend on them or what?
thanks in advanced!

Managed Default versus Managed Custom Folder, and Default Folder Type Options

I am looking to create some new managed folders needed for company retention policy.
It seems pretty forward to create the folder:
New-ManagedFolder -Name "[Name Here]" -DefaultFolderType Inbox -Comment "[comments here]" -MustDisplayComment $true
However I have noticed there seems to be two types of folders: Managed Custom and Managed Default. What exactly is the difference.
Also what different default folder type options are there, and what is the different between them?

I actually am using retention tags and retention policies for the existing folders (inbox, deleted, junk/spam, conversation history). Which takes care of most of our actual messages.
However most of the space in a users mail box is take by docs scanned to their emails. These docs are almost instantly moved to file servers, and other databases but sit in the mailboxes for ever. So I was hoping to create a default folder and deploy rules
so that all the scanned items are automatically moved to that folder where they can be deleted per a retention policy tag.
I'm not married to this method but it did seem reasonable in terms of not leaving things to the users to sort items, and would love a better way to accomplish it.
The retention policy says we will keep communications for a maximum x years for users excluding certain document types (junk/spam, voice mails, Instant messages, Scanned docs) and any thing older will be automatically removed, the special documents
will have significantly shorted life spans (1 to 8 weeks).

Management and Default VLAN

Hi All
I need advice.
At my former office, we used to have another vlan e.g. vlan 10 for management vlan purpose so that we do not use default VLAN 1 to access the switches which i think is good for security purpose.
Now how can I convince my present company that it is the best way to go as they have only vlan 1 for management purposes but then use another vlan say vlan 189 for all unused port which alas, they do not keep to, so invariably, we have ports in vlan 1 and 99 and every where
Is there a doc whereby I can show them why it is best to have a different management vlan from default vlan.?
Thanks

Hi, here is a link that gives a little explanation on Precautions for the use of default management vlan.
Refer to "Precautions for the Use of VLAN 1" section.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a008013159f.shtml#wp38986

Kurt Langs Font Management in OSX and Tiger

This Font Management FAQ has been invaluable. I am working on an Intel mac and mneed to get my fonts in order. Does this apply in the same way with the Intel Macs?

It should. Just realize there is no Classic in Intel Macs.

Font management (export and default)

Similar Messages

Maybe you are looking for