Font mapping problem

Hi,
I'm away and on a colleagues Mac ( OSX 10.6.8 ) Running Photoshop CS5 and Illustrator CS6.
Doing a little artworking for them. When I fired up Illustrator... the font mapping on the keyboard is screwy. Type an A, get a K etc...
The settings on both the Mac and Illustrator are set up for British UK. Photoshop is fine, as is the Mac.
Only Illustrator is acting up. Question is... is this a known bug and what can I do about it.
Many thanks in avdance,

Do you have any system preference or startup otpion that is set to exclude illustrator?
I think something like this was once posted?
You can read this article as well
http://helpx.adobe.com/x-productkb/global/troubleshoot-unexpected-behavior-user-account.ht ml

Similar Messages

Report fonts mapping and PDF output problem(Easten European languages)

Hi experts,
I have such a problem.
If i run oracle reports(10g) via reports builder all layouts looks fine.
When i run them in PDF format via application server - report text and numbers strech out off frames, also textfields and text itself becomes bigger in size.
Aplication server runs over windows OS.
Uifont.ali file looks:
[ PDF:Subset ]
Arial..Italic.Bold.. = "Arialbi.ttf"
Arial...Bold.. = "Arialbd.ttf"
Arial..Italic... = "Ariali.ttf"
Arial..Plain... = "Arial.ttf"
Arial..... = "Arial.ttf"
"Times New Roman"...Bold.. = "TIMESBD.TTF"
"Times New Roman"..Italic... = "TIMESI.TTF"
"Times New Roman"..... = "TIMES.TTF"
I think the problem is with Lithuanian(baltic) letters in the text. If i do not map fonts in uifont.ali file i get PDF report without the
lithuanian alphabet letters, but in this case it looks fine(The same as in report builder)
After fonts mapping, i get my lithuanian alphabet letters, but text and numbers strech out off frames, changes the size and etc.
I put the example of my report uotput:
http://pirmas.50webs.com/index.html
What else can i do to solve this problem?
Thanks for any suggestions
Sky_lt

Vangel
For the html output issue , there is a patch available on top of 9021. Please contact your Oracle support representative to get a 90211 patch nd apply the one-off patch of Bug 2472932.
For PDF, please ensure that you are setting the NLS_LANG in the server config file using the dynamic environment switch feature introduced in 90 patch 1 (9021). Please see the patch 1 release notes for the details
Thanks
The Oracle Reports Team

Fonts mapping in the browser

Hi all,
Another question. I have developed some forms which have some dedicated fonts used. It runs smoothly in the client/server mode (as well as the font type). However, once I put it on the web, the fonts type differs from what I expected.
Some documentations say that we need to modify the browser registry, developer registry, formsweb.cfg, base.htm, basejini.htm and the registry.dat, but it seems it soes not work. How can I achieve this?
Sorry for my poor English.
Thanks,
Patrick.

I have a similar problem. My forms are built with 'MS Sans Serif' and they display with a different font in the browser ('Dialog' I guess).
I have tried to change this font mapping by editing registry.dat (as suggested by the manual and other Oracle gurus in the forum) replacing 'Dialog' with 'Symbol' to see the results. The output is the same!
Has anyone managed to successfully change the font mapping of the forms?
(I am using Windows Developer Server 6i patch3a)
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Patrick:
Hi all,
Another question. I have developed some forms which have some dedicated fonts used. It runs smoothly in the client/server mode (as well as the font type). However, once I put it on the web, the fonts type differs from what I expected.
Some documentations say that we need to modify the browser registry, developer registry, formsweb.cfg, base.htm, basejini.htm and the registry.dat, but it seems it soes not work. How can I achieve this?
Sorry for my poor English.
Thanks,
Patrick.<HR></BLOCKQUOTE>
null

XSL-FO Barcode Font Mapping

Hi everyone,
I'm trying to use a barcode font (IDAutomationHC39M.ttf) inside a XSL-FO template (Standard Purchase Order Template). I already loaded the font and created the mapping using XML Publisher Administration Configuration, but I still cannot see the font being displayed on the PDF format. I did the reference in the code, e.g.:
<fo:block>
<fo:inline>Order Number: </fo:inline>
<fo:inline font-family="IDAutomationHC39M">404</fo:inline>
</fo:block>
but, it didn't work. I really don't know what I'm doing wrong. I thought it was going to be just reference the font. I would really appreciate any possible help because this is a last minute request of the client and we will be soon going to production.
Thanks,
Hugo

I am having the same problem here. Were you able to create the font mapping? Once I click the apply button, I get an error message.

[SOLVED] TeXLive: Installing font package and updating font map fails

I am trying to install the newtx package, which is available here at CTAN [1].
Since I don't want to mess with my TeXLive installation, I am trying to do that as a local user only.
So I placed the package into ~/texmf/tex/latex/. , ran texhash on texmf/ to update my local ls-R, and so far everything works nicely; for example, the .sty files in that package can be seen:
$ texhash texmf
texhash: Updating /home/$USER/texmf/ls-R...
texhash: Done.
$ kpsewhich newtxmath.sty
/home/$USER/texmf/tex/latex/newtx/newtxmath.sty
Now, following the packages README [2], I need to update the my TeX font maps. Seems like 'updmap' is the right tool to do that for my user only:
$ updmap --enable Map=ntx.map
copy /etc/texmf/web2c/updmap.cfg => /home/$USER/.texlive/texmf-config/web2c/updmap.cfg
Config file: "/home/$USER/.texlive/texmf-config/web2c/updmap.cfg"
dvips output dir: "/home/$USER/.texlive/texmf-var/fonts/map/dvips/updmap"
pdftex output dir: "/home/$USER/.texlive/texmf-var/fonts/map/pdftex/updmap"
dvipdfm output dir: "/home/$USER/.texlive/texmf-var/fonts/map/dvipdfm/updmap"
pxdvi output dir: "/home/$USER/.texlive/texmf-var/fonts/map/pxdvi/updmap"
/usr/bin/updmap is creating new map files
using the following configuration:
LW35 font names : URWkb
prefer outlines : true
texhash enabled : true
download standard fonts (dvips) : true
download standard fonts (pdftex) : true
create a mapfile for pxdvi : false
Scanning for LW35 support files [ 3 files]
Scanning for MixedMap entries [ 36 files]
Scanning for KanjiMap entries [ 0 files]
Scanning for Map entries [129 files]
ERROR: The following map file(s) couldn't be found:
ntx.map
Did you run mktexlsr?
You can delete non-existent map entries using the option
--syncwithtrees.
That's my problem: it can't find ntx.map, although I ran mktexlsr (which is texhash). So what to do?
1: http://www.ctan.org/pkg/newtx
2: http://ftp.uni-erlangen.de/mirrors/CTAN … wtx/README
SOLUTION: The trick consists in placing all files into the necessary folders: *.map goes to fonts/map/newtx/, *.vf to fonts/vf/newtx/, and *.tfm to fonts/tfm/newtx/. Also, *.pfb needs to be placed in fonts/pfb/newtx/. *.enc files go to fonts/enc/newt/, and everything else remains in tex/latex/newtx/.
Last edited by Stalafin (2012-06-20 12:32:16)

ConnorBehan wrote:Oh it's part of the mlocate package. It will search your entire filesystem for a filename but there are other programs that do the same. I just meant, can you find ntx.map yourself? If so, you could put it in a new directory or let tex know with the TEXINPUTS environment variable.
I really don't think that this makes a lot of sense as regards TeXlive; I have checked (with kpsewhich --var-value) if indeed all variables TEXMFHOME, TEXMFVAR, and TEXMFCONFIG are pointing to reasonable places, and indeed they do.
I have found this guide:
http://people.debian.org/~preining/TeX/ … n/ch4.html
Although it is Debian, I figure one can easily adapt it. So I tried that, and placed ntx.map in TEXMFHOME/fonts/map/$SYNTAX/newtx/ntx.map . I wasn't sure about $SYNTAX, so I just tried it with dvips. This time, $ updmap --enable Map=ntx.map did actually work, and there were not errors:
$ updmap --enable Map=ntx.map
copy /etc/texmf/web2c/updmap.cfg => /home/janis/.texlive/texmf-config/web2c/updmap.cfg
Config file: "/home/$USER/.texlive/texmf-config/web2c/updmap.cfg"
dvips output dir: "/home/$USER/.texlive/texmf-var/fonts/map/dvips/updmap"
pdftex output dir: "/home/$USER/.texlive/texmf-var/fonts/map/pdftex/updmap"
dvipdfm output dir: "/home/$USER/.texlive/texmf-var/fonts/map/dvipdfm/updmap"
pxdvi output dir: "/home/$USER/.texlive/texmf-var/fonts/map/pxdvi/updmap"
/usr/bin/updmap is creating new map files
using the following configuration:
LW35 font names : URWkb
prefer outlines : true
texhash enabled : true
download standard fonts (dvips) : true
download standard fonts (pdftex) : true
create a mapfile for pxdvi : false
Scanning for LW35 support files [ 3 files]
Scanning for MixedMap entries [ 36 files]
Scanning for KanjiMap entries [ 0 files]
Scanning for Map entries [130 files]
Generating output for dvipdfm...
Generating output for ps2pk...
Generating output for dvips...
Generating output for pdftex...
Files generated:
/home/$USER/.texlive/texmf-var/fonts/map/dvips/updmap:
11493 2012-06-19 21:57:22 builtin35.map
15956 2012-06-19 21:57:22 download35.map
523074 2012-06-19 21:57:22 psfonts_pk.map
747564 2012-06-19 21:57:22 psfonts_t1.map
747559 2012-06-19 21:57:22 ps2pk.map
14 2012-06-19 21:57:24 psfonts.map -> psfonts_t1.map
/home/$USER/.texlive/texmf-var/fonts/map/pdftex/updmap:
747566 2012-06-19 21:57:23 pdftex_dl14.map
745992 2012-06-19 21:57:23 pdftex_ndl14.map
15 2012-06-19 21:57:24 pdftex.map -> pdftex_dl14.map
/home/$USER/.texlive/texmf-var/fonts/map/dvipdfm/updmap:
339 2012-06-19 21:57:22 kanjix.map
Transcript written on "/home/$USER/.texlive/texmf-var/web2c/updmap.log".
/usr/bin/updmap: Updating ls-R files.
There indeed now is a 'Map ntx.map' at ~/.texlive/texmf-config/web2c/updmap.cfg . However, compilation of a document containg `\usepackage{newtx}` still fails (see the bttom of this wall of text):
pdflatex test.tex
This is pdfTeX, Version 3.1415926-2.3-1.40.12 (TeX Live 2012/dev/Arch Linux)
restricted \write18 enabled.
entering extended mode
(./test.tex
LaTeX2e <2011/06/27>
Babel <v3.8m> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman-x-2011-07-01, ngerman-x-2011-07-01, afrikaans, ancientgreek, ibycus, arabi
c, armenian, basque, bulgarian, catalan, pinyin, coptic, croatian, czech, danis
h, dutch, ukenglish, usenglishmax, esperanto, estonian, ethiopic, farsi, finnis
h, french, galician, german, ngerman, swissgerman, monogreek, greek, hungarian,
icelandic, assamese, bengali, gujarati, hindi, kannada, malayalam, marathi, or
iya, panjabi, tamil, telugu, indonesian, interlingua, irish, italian, kurmanji,
lao, latin, latvian, lithuanian, mongolian, mongolianlmc, bokmal, nynorsk, pol
ish, portuguese, romanian, russian, sanskrit, serbian, serbianc, slovak, sloven
ian, spanish, swedish, turkish, turkmen, ukrainian, uppersorbian, welsh, loaded
(/usr/share/texmf-dist/tex/latex/base/minimal.cls
Document Class: minimal 2001/05/25 Standard LaTeX minimal class
) (/usr/share/texmf-dist/tex/latex/libertine/libertine.sty
(/usr/share/texmf-dist/tex/latex/graphics/keyval.sty)
(/usr/share/texmf-dist/tex/generic/ifxetex/ifxetex.sty)
(/usr/share/texmf-dist/tex/generic/oberdiek/ifluatex.sty)
(/usr/share/texmf-dist/tex/latex/lettrine/lettrine.sty
Loading lettrine.cfg
(/usr/share/texmf-dist/tex/latex/lettrine/lettrine.cfg))
(/usr/share/texmf-dist/tex/latex/tools/calc.sty)
(/usr/share/texmf-dist/tex/latex/libertine/fxl.inc)
(/usr/share/texmf-dist/tex/latex/libertine/fxb.inc)
(/usr/share/texmf-dist/tex/latex/libertine/fxk.inc)
(/usr/share/texmf-dist/tex/latex/libertine/fxi.inc))
(/usr/share/texmf-dist/tex/latex/base/fontenc.sty
(/usr/share/texmf-dist/tex/latex/base/t1enc.def))
(/usr/share/texmf-dist/tex/latex/mh/mathtools.sty
(/usr/share/texmf-dist/tex/latex/mh/mhsetup.sty)
(/usr/share/texmf-dist/tex/latex/amsmath/amsmath.sty
For additional information on amsmath, use the `?' option.
(/usr/share/texmf-dist/tex/latex/amsmath/amstext.sty
(/usr/share/texmf-dist/tex/latex/amsmath/amsgen.sty))
(/usr/share/texmf-dist/tex/latex/amsmath/amsbsy.sty)
(/usr/share/texmf-dist/tex/latex/amsmath/amsopn.sty)))
(/home/janis/texmf/tex/latex/newtx/newtxmath.sty
`newtxmath' v0.96, 2012/06/05 Math macros based on txfonts (msharpe)
(/usr/share/texmf-dist/tex/generic/kastrup/binhex.tex)
(/usr/share/texmf-dist/tex/latex/xkeyval/xkeyval.sty
(/usr/share/texmf-dist/tex/generic/xkeyval/xkeyval.tex))) (./test.aux)
(/home/janis/texmf/tex/latex/newtx/omlntxmi.fd)
(/home/janis/texmf/tex/latex/newtx/omsntxsy.fd)
(/home/janis/texmf/tex/latex/newtx/omxntxex.fd)
(/home/janis/texmf/tex/latex/newtx/untxexa.fd)
(/usr/share/texmf-dist/tex/latex/libertine/t1fxl.fd)
(/usr/share/texmf-dist/tex/latex/graphics/graphicx.sty
(/usr/share/texmf-dist/tex/latex/graphics/graphics.sty
(/usr/share/texmf-dist/tex/latex/graphics/trig.sty)
(/usr/share/texmf-dist/tex/latex/latexconfig/graphics.cfg)
(/usr/share/texmf-dist/tex/latex/pdftex-def/pdftex.def
(/usr/share/texmf-dist/tex/generic/oberdiek/infwarerr.sty)
(/usr/share/texmf-dist/tex/generic/oberdiek/ltxcmds.sty)
(/usr/share/texmf-dist/tex/context/base/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
))) (/usr/share/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty
(/usr/share/texmf-dist/tex/generic/oberdiek/ifpdf.sty))
(/usr/share/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
(/usr/share/texmf-dist/tex/latex/oberdiek/grfext.sty
(/usr/share/texmf-dist/tex/generic/oberdiek/kvdefinekeys.sty))
(/usr/share/texmf-dist/tex/latex/oberdiek/kvoptions.sty
(/usr/share/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty
(/usr/share/texmf-dist/tex/generic/oberdiek/etexcmds.sty)))
(/usr/share/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)))
kpathsea: Running mktextfm ntxmi
/usr/share/texmf/web2c/mktexnam: Could not map typeface abbreviation tx for ntxmi.
/usr/share/texmf/web2c/mktexnam: Need to update /usr/share/texmf-dist/fonts/map/fontname/special.map?
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ntxmi
This is METAFONT, Version 2.718281 (TeX Live 2012/dev/Arch Linux)
kpathsea: Running mktexmf ntxmi
! I can't find file `ntxmi'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input ntxmi
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input ntxmi
Transcript written on mfput.log.
grep: ntxmi.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ntxmi' failed to make ntxmi.tfm.
kpathsea: Appending font creation commands to missfont.log.
! Font OML/ntxmi/m/it/10=ntxmi at 10.0pt not loadable: Metric (TFM) file not fo
und.
<to be read again>
relax
l.13 \begin{equation*}
EDIT: Of course, everything else from the newtx pacakge was still in TEXMFHOME/tex/latex/newtx/ .
Last edited by Stalafin (2012-06-19 20:08:30)

Font Mapping Issue while exporting to HTML

Dear All,
When I extract a PDF To an HTML the font mapping for certain character wont happen perfectly, i.e some charaters which are in upper case are mapped as lower case when extracted to the HTML, kindly suggest the measures which i can take in order to fix this issue..
Note: For a better clarity regarding the issue I am affixing a snap shot for the Query:
1. HTML File after Exporting:
2. Actual PDF File which is needed to be Exported
Please respond!!!
Regard's
Amith Sai

Yes I exported the PDF using adobe acrobat, the version details are:
Adobe Acrobat : 9.3.3
HTML Version to which it was extracted to was 4.01
I Can Surely Give you the PDF which is causing this kind of a problem, if you can provide me your mail ID by sending a private message or u can suggest any other better alternative to send you the PDF
Regard's
Amith Sai

Can you help me with FontExplorer font activation problems?

Anyone know how to solve a font activation problem I am having with FontExplorer 4.2? I am on a new mac with new fonts, I am using Maverick with Adobe CS6. With my new mac I bought the latest version of FontExporer Pro X 4.2. This program is having trouble with font activation in all my Adoble suite apps including Indesign. Here is what I am seeing:
1. The font activates, but the Adobe app does not recognize that it is active. If I go back to Font Explorer and deactivate manually, then re-activate manually. The adobe app might then recognize it. Sometimes it still doesn't. But this does not stay permanently, as soon as I do a restart I have to go through this process again. I see this more often with the User system fonts, but a few times with my regular fonts.
2. Other times, such as in Indesign, I go to open the file and the file stalls and doesn’t progress while it is trying to activate the fonts.
3. Another time I have seen after an illustrator file is opened the fonts aren't recognized as being opened and the text goes blank on the page.
4. In all adobe apps, if I go to use "replace font" on the missing fonts (even though they are turned on) the "replace font" menu only shows the basic system fonts, it won't show me the other fonts turned on.
I have seen these issues with both formerly created files and fresh new files.
I have tried the following based on feedback from Font Explorer staff:
Refresh your Spotlight database
1. Quit all applications other than FontExplorer X
2. Choose Tools > Refresh Spotlight Database
Clean your font caches
1. Quit all applications other than FontExplorer X 2. Choose Tools > Clean Application Font Caches (check all available checkboxes)
3. Choose Tools > Clean System Font Caches (requires restart)
Still after trying this multiple times, the errors continue and even get more random.
I have also tried this based on their feedback:
go to FONTEXPLORER X PRO -> PREFERENCES -> ADVANCED and make sure that "Automatically deactivate fonts which have not been activated by the system" is NOT set to never.
Then click on TOOLS and clean all font caches. Then reboot the system.
The auto-activation is using a new Apple technology (called Core Text), which unfortunately does not work correctly with some of the Adobe and Quark applications when keeping the fonts permanently activated. We are currently working on an update, and the next version of FontExplorer X Pro will fix this issue.
This has also not work. Can anyone help me?

Here is the official work-around for this problem.
1. Locate "FontExplorer X Pro.app" in Applications
2. Right-click on "FontExplorer X Pro.app" and select "Show Package Contents"
3. Navigate to /Contents/Helpers/
4. Double-click "FontExplorerXLauncher-3.app" or right-click and "Open" to launch it manually. This is needed only once, afterwards the plugins will work normally.
Please make sure you open the version with the "-3" suffix, the other one does not fix the problem.

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Font mapping in Forms 10g on Unix/Linux

Hello,
does anybody have a adea how font mapping in forms 10g works on Unix/Linux.
As far as I know I do have to have a X-Server running on the node so that forms can mapp java fonts, is this true?
What configuration options do I have on the server.
Can I differ strictly between development tasks (consideration of developer) and admin tasks ([configuration]considerations of Application Server Admin) referring font mapping in forms 10g?
Is there any "Best Practices to this subject?
Thank you.
Regards
Frank

Hello Frank,
- fontmapping takes place in Registry.dat file?!
- According to your article "Forms: Using custom fonts in Oracle Forms Services 10g" I only have to customize fontmapping in Registry.dat file.
-Customer developes on MS-Client and uses Arial,but is surprised about displayed font, which is´nt Arial.
-Can I just customize font mapping in Registry.dat as follows (according your example)?
default.fontMap.appFontnames=x,y,Arial
default.fontMap.javaFontnames=u,v.Arial
What do we have to consider on client site?
What´s about java on client (JInitiator)?
Regards
Frank

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Mapping problem - Shaded areas in the wrong place

Hey experts,
I`ve already contacted you on this issue a few days ago. I created a query, which executes a few key figures mapped to the postalcode.
I tried to let me display this query on the web, using the WAD. The shapefiles were uploaded correctly, for the contours of the country and the postalcode areas are displayed accurately.
At the first sight, I thought a performance problem could be the challenge. But I did not find any information on that. On my last post, i received one answer, that I had to adjust the sort order. But that did not bring any results either!
At the moment, it looks more like a mapping problem in the dBase File to me. How can a proper mapping be achieved? I tried to just add a SAPBWKEY column, like it is proposed here: http://help.sap.com/saphelp_nw04/helpdata/en/3b/7c92ec1bed374ee0000800091c1b0e/content.htm.
An extract of my dBase-File schematically looks like this:
0country, 0Postalcod, SAPBWKEY
DE 48900 DE/48900 (for it is a composite attribute)
The mapping seems to work in a rather random way, because the shaded areas are at least displayed somewhere on the map, but not where they supposed to be, e. g. one district of south Germany in the far north and so on.
Did you have any similar issues in the past or any tips for a solution?
Thanks&regards
Marcus

Sorry, I guess this is just a bug in some programs including firefox:
https://bugzilla.mozilla.org/show_bug.cgi?id=314279

Mapping Problem ORDERS Idoc to Edifact

Hi,
I have a mapping problem with the IDOC ORDERS:
I get the IDOC with several E1EDP01. Each E1EDP01 has several E1EDPT1, where i want only the first one (which I get over the TDID value). Each E1EDPT1 has min. 1 E1EDPT2.
Now I have to map each field TDLINE from first two E1EDPT2 of the first E1EDPT1 to the Edifact fields /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008 (from the first E1EDPT2) and, if a second E1EDPT2 exists in /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008_2.
I use following UDF:
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
else
result.addValue(ResultList.SUPPRESS);
Unfortunatly, I think becaus of the context problems (not every E1EDPT1 has two E1EDPT2), it's not working. Could somebody help me with this problem?
Thanks in advance
Dominic

Dear Dominic ,
I had same problem when I was trying to do the same thing for FTX segment.
Your UDF is fine but you don't need else condition.
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
for C_C273 assigned contant value and
D_7008 assigned TDLINE but change the context to E1EDPT1
and for D_7008_2
TDLINE(context to E1EDPT1 )
====>UDF====>D_7008_2
Contant(=1)
It should work becasue my map is working fine. If not let me know error message.
Thanks
Shubhankar

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
E1EDK14 occurs 4 times in the source sys:
1   E1EDK14-QUALF = '014'
     E1EDK14-ORGID = 'YP01'      <= purchase organization
2   E1EDK14-QUALF = '009'
     E1EDK14-ORGID = '001'      <= purchase group
3   E1EDK14-QUALF = '013'
     E1EDK14-ORGID = 'NB'      <= document type
4   E1EDK14-QUALF = '011'
     E1EDK14-ORGID = 'C999'      <= company code
I always want to copy "E1EDK14-ORGID = '001'" to PORDCR102-PUR_GROUP.
I have a solution which works but not perfect:
E1EDK14-ORGID=>copyvalue[1]=>PORDCR102-PUR_GROUP
I want to have the perfect mapping as follow:
IF E1EDK14-QUALF = '009'.
E1EDK14-ORGID = '001' => PORDCR102-PUR_GROUP
ENDIF.
I did it in the data flow editor as follow:
/PORDCR102/IDOC/E1PORDCR1/E1BPMEPOHEADER/PUR_GROUP=
ifWithoutElse([keepss=false]stringEquals
(removeContexts(/ORDERS05/IDOC/E1EDK14/QUALF=),
const([value=009])), /ORDERS05/IDOC/E1EDK14/ORGID=)
But the result in the target sys is always 'YP0'(The first E1EDK14-ORGID)
How to solve this problem?
Thanks
ming yu

Hi,
Try like this.
E1EDK14-QUALF   --------
Constant(009) ----------------   EqualsS ---------------
                                                             And(Boolean Function)     ------ IfWithoutElse -- PORDCR102-PUR_GROUP
E1EDK14-ORGID -------                                                      E1EDK14-ORGID ----------------
Constant(001) --------------   EqualsS ------------------
Regards,
P.Venkat

Font mapping problem

Similar Messages

Maybe you are looking for