'Font missing' - but I've never had the font in the first place.
When I launch iWeb on my Mac Pro it tells me I am missing the font Helvetica Condensed - but I've never had this font in the first place and therefore couldn't have used it for it now to be missing.
Anyone else have this issue and how did you cure it?
I have found the answer... as always, just close iTunes and start it up again. I guess I was in too much of a hurry to do the obvious!!
Similar Messages
-
Why does my aol mail not sync properly with the Droid Razr? Never had the problem with blackberry but now I deal with a great deal of spam & duplicating tasks
This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs? -
Air MD792E/A, iPAD WIFI CELL 32G Space Grey
Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in? Tried to sync with itunes but iTunes can't sync without a password. I cannot see summary on the side bar. How do I restore so I can restart my iPAD Air since it has relatively no history. I have not had the chance to use it yet. Finished set up to as far as the start menu.
<Personal Information Edited by Host>How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How do I download Adobe Flash Player on my MacBook Pro? It says that I have to disable my antivirus software but I never installed one. Does it come with the Mac in the first place? If so, how can I disable it or get Adobe Flash Player?
That message is just a standard one issued, mainly for Windows users, you can disregard it if you didn't install any anti-virus. (OS X has one installed by Apple that doesn't interfere)
It's just some forms of anti-malware are really paranoid and lock the entire machine down. (like Norton)
If you need assistance installing Flash
How to install/uninstall Flash, fix problems
How to uninstall/install software on your Mac -
i just updated the OS to 10.6.8 but then i never get the app store that supposed to be included in the update. so now, how can i download the app store?
Hi,
Have you tried a Restart since doing the Update...?
If Yes and you still don't have it...
Download and Install the 10 6 8 Combo Update from here
http://support.apple.com/kb/DL1399
Cheers, -
I have installed adobe reader onto my Mac but when I open up an adobe pdf it tells me that i need to accept the end user license agreement, quite, and then open up a new browser but i have never seen the end user license agreement. What should I do in order to accept the end user license agreement even though it never pops up when i install adobe reader?
Make sure Readr is closed. Go to the Applications form, look for the Adobe Reader icon, double click on it, and follow the lead. Restart Reader when finished.
-
I'm being asked the answers to security questions when I try to download an album but I've never gave the info originally. How do I get past it ?
If you log into your account are you able to set them ? Go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side are you able to select the questions/answers ? If not then is there a reset link beneath the 2 questions ? (The reset link will only show if you have a rescue email address on your account.)
If not then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
This article should never have needed to be written if the upgrade had been properly programmed in the first place. It is really shoddy producing something which causes a lot of work to so many people. Although the work round worked, it took a long time to download both the trial version and then the upgrade and re-install and deprived me of the opportunity to do what I would otherwise have done. It puts me off using updates in future.
Hello,
Welcome to the forum.
I'd like to look into this for you, can you send us your details so we can look into this? If you click on my username you'll be able to get our "Contact us" form.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
I have never had the issues I am having with the latest update to Yosemite. Is there a fix/update for this?
For what? It works fine for me on three different computers. If you want a fix for something then be more specific.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Can't change the font to my digital signature, which I never wanted to change in the first place.
How do I change the font to my digital signature? Why did Adobe force me to change it in the first place?
The only way to resolve this then is to ask iTunes Support for help. Only they can deal with the issue now.
http://www.apple.com/emea/support/itunes/contact.html -
I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?
You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’. -
I want to print an email which has multi pages but I can only print the first page
Can anyone help please?
i want to print an email which has multi pages but I can only print the first page
TonyFirefox cuts off the URL in your printout, if it's really long, and you also have on the same line (header or footer), the Date and Pages
What I have summarized below is based on this page . . . http://www.watchingthenet.com/how-to-change-or-customize-firefox-printing-defaults.html
I have two questions:
To fix, do a custom setting, for the Header and Footer as follows:
Print / Page Setup / Margins & Header/Footer / "Customize" the "Left" as follows (leave Center and Right all blank)
&T
&U . . . . . . . &D . . . . . . . &PT
&D shows the Short date as: M/d/yyyy - and then the time
To change the format of the Short date in Win 8.1, go to:
Control Panel / Date and Time / Date and Time tab / Change date and time / Change calendar settings /
Date / Short date . . . change from M/d/yyyy . . . to . . . MM/dd/yy
QUESTIONS:
1.) How do you get rid of the time, which appears after the date? In IE, you use a lowercase "d" - but that doesn't work here.
2.) Is there a way to change the font just for the Header and Footer, to something like Microsoft Sans Serif 10?
Firefox leaves no room around the text in the Header and Footer at the edge. To fix:
Address Bar / about:config
Enter keyword "edge"
Then change all four values for the printer you're using to:
print.printer_Foxit_PhantomPDF_Printer.print_edge_bottom . . . 5
print.printer_Foxit_PhantomPDF_Printer.print_edge_left . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_right . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_top . . . 5 -
How do I delete an iPad from my Mac, like I never sync in the first place?
How do I delete an iPad from my Mac, like I never sync in the first place?
I have a pc, rather than a mac, but the process is the same from what i have read on the Apple website.
You can restore to original factory settings as ifyou never synced the ipad with a computer by going to settings >reset (last option on the menu) > erase all content and settings.
Youcan also do it by connecting your ipad to your computer and choosing toRestore it from the 'summary' menu (below the Update option). I wasnot able to do it this way because it kept timing out with the iPadsoftware update, but it might work for you.
These options may take a while if you have lots ofcontent but once it is done it will just as it was when you bought it,with factory settings.
NB: Note that this process will erase all content, so if you have purchased apps, music etc, be sure to transfer your purchases first!
This process has worked for me and I am now just syncing my ipad with my desktop instead of my laptop.
Hope this helps. -
how do you transfer Apple IDs from one ipad to another iPad? I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.
You don't transfer Apple ID's from one device to another one. You sign out in the settings, )the App Store and iTunes if necessary) and then sign in with the other ID.
Settings>iTunes & App Stores>Apple ID>Sign out. Them sign in with the other ID. You can sign out of the app store and iTunes as well by going to the featured Atab in the App Store and the music tab in iTunes, swipe to the bottom and access the Apple ID in there.
You should have erased the iOad before you gave it to her in Settings>General>Reset>Erase all content and settings. That way she could set up the iPad as new with her own Apple ID.
Be aware of the fact that if you use each others ID's in order to download past purchased content to your own iPads, you will lock yourself out of your own ID as you will have associated your iPad with the other person's Apple ID.
In other words, if you sign into your wife's ID on your iPad so that you can download an app or an album so that you don't have to pay for it again, you will lock yourself out of your Apple ID for 90 days. -
How can I disable making live shape rectangle in the first place but normal one instead in Illustrator CC? When I create rectangle I can't transform it by dragging and it's only the problem with rectangle, not with circle, star etc. I try show/hide edges/bounding box reset preferences and reinstall whole illustrator CC and it's the same. I can only make this right by expand this rectangle, which is shape as is turn out to rectangle by clicking object>shape>expand rectangle. But this is so frustrating. Help!:) oh, and I use OSX. My friend has the same specs and it's works. I mean she can use live shape corner transformations and changing size by draging:(
I’ve created my own plugin (available for free for personal and commercial use) which imitates behavior of the ‘old’ Rectangle Tool. It doesn’t replace the Live Rectangle – it works completely independent!
My Plain Rectangle Tool correctly snaps to grids/objects/points and correctly aligns to grid/points on resize. Of course it supports the SHIFT and ALT/OPTION keys, Snap to Grid and Smart Guides options. In other words it works almost 100% the same as the Rectangle Tool we know from CC (17.1), CS6 and earlier.
The installation package (zxp) adds ‘Plain Rectangle Tool’ icon into the Ai panel (of curse you can assign your custom keyboard shortcut to it as well)
Note: The Plain Rectangle can be easily converted into the Live one using Object > Shape > Convert to Rectangle
Grab your copy at http://63mutants.com/subc/products/PlainRectangleTool_m01/PlainRectangleTool_m01.php Feel free to share with your friends. It’s completely free.
I’ve also created a separate discussion https://forums.adobe.com/thread/1587587 for the Plain Rectangle Tool. If you have any comments or request please post it there. Any feedback would be greatly appreciated!
Thanks,
Pawel Kuc
Maybe you are looking for
-
Blip.tv videos not appearing at all in Firefox 28
This just started to be a problem for reasons unknown, but Blip.tv's video player just doesn't load any more in Firefox 28. You might be asking "Why are you using 28? That's probably the issue." I do not wish to upgrade to a Chrome clone. I'm sorry.
-
Hi, I have already posted but couldn't get the solution. So just incase if anyone can suggest something, it would be appreciated. On the form, there is a browse button and a submit button. The normal procedure of clicking on the browse button, and th
-
Premiere Pro CC 2014 hangs on export
I opened a project that worked on the previous version and everything played fine in the 2014 update, rendering previews and smooth playback with no problems. When I go to export it hangs. The sequence is full of ProRes 4444 footage with the sequence
-
Job to execute every half hour
Hello, I need to create a job which should execute every half hour starting from morning 6:AM to evening 4:PM every day. How can I do this? Thanks
-
MORE HELP PLZ!...ja, i love doing trouble, it seems
OOOOK, here's me again and, guess what....yep, i've done something stupid again (very frequently). after i had reset my ipod, it was a happy life again and all that, but again i (stupidly) wanted to know how it was to lock the screen....and....well,