Font missing, how to find to replace?

I'm using Adobe Illustrator CS6, upgrading from CS5, on a Win7 machine. I have an old Type 1 face (Interstate) where I'm replacing it with a custom Open Type face from Font Bureau (InterstateRL). I have removed the old font from my system, so I can root out every instance and replace it by opening each Illustrator file used weekly. When I open up the file, I get the expected message "InterstateTab-Regular: Font not found on the system; missing font has been substituted." Great, just what I expected! But when I go to find the font to replace it with the new font, I cannot find it in the file. I have done the following:
Look in Normal Paragraph Style (or any paragraph style). -- missing font not in use
Look in Normal Character Style (or any style) -- missing font not in use
Document Setup > Highlight Substituted Fonts -- None show up
Go to Find Fonts to search for missing font -- But it does not appear in Find Fonts
Go to Object>Path>Cleanup and check Empty Text Paths and click ok. Close and reopen document. -- done, no change
Check that there are no hidden layers -- There are no hidden layers or sublayers
Check to see if any text objects are formatted with no color that use the missing font - none are
Check the Patterns and Symbols, if there is any text inside those. Find Font only looks for what is in the document. -- Selected all symbols and deleted (these did not include text), no change.
Any other ideas for what I could try?

SOLUTION! This appears to related to the fact that the object in the file was a GRAPH. The increments had always appeared blank in the final document, and the corresponding cells in the datasheet were blank. To fix the problem, I had to enter text in every blank cell in the first column of the datasheet to make it visible as a Category Axis label in the graph,. Since it didn't matter what the text was, I just used a period symbol in each empty cell. Then I could group select the Category Axis label text at the bottom of the graph, apply the Character Style with the preferred font, and CLEAR the override (if it appeared) to the Character Style.
I then closed and reopened, and the missing font message did not appear. I removed the periods in the datasheet, saved again, opened, and the missing font message appeared to be gone for good.
So it does appear that whatever font was assigned to the Graph Category Label text was still assigned, even though the font wasn't visible in any of the panels or through Find Fonts.
NOTE: The unwanted InterstateTab-Regular Type1 font NEVER APPEARED anywhere that I could see in Illustrator. It didn't appear in FIND FONTS or in my CHARACTER panel, even when I only selected one individual "invisible" increment, or one of the increments when it became visible with the period symbol. However, it was obviously embedded in the graph element itself at the time I had created the graph. And if I created a pdf file, from Illustrator or from the InDesign file the Illustrator art was linked to, it appeared in the FONTS tab. So it was clearly getting embedded in the pdf file. The only font that every appeared in any window, except for the missing fonts message on opening, was the correct InterstateRLTab Regular Opentype font.

Similar Messages

How to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, a

how to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, asking for adobe livecycle to get installed. please help.

Easiest way to do it is the following:
- Open the PDF file in Acrobat.
- Go to Tools - Forms - More Form Options - Export Data.
- Save the form data as an XML file somewhere on your system.
- Open XML the file in a plain-text editor (I recommend Notepad++).
- Let's say you want to replace all the years in the dates from "2013" to "2014". Do a global Search&Replace of "2013-" to "2014-" (I added the dash just to make sure that only date fields are edited).
- Save the XML file (maybe under a new name).
- Go back to the PDF file, and now go to Tools - Forms - More Form Options - Import Data.
- Select the edited XML file and import it.
- Done!

How to find and replace any string between " "

Hi everyone,
Here my sample
String szTest;
szTest = "Yellow banana";
szTest = "Blue monkey";
szTest = "Red mango";
szTest is only needed when it's in testing progress. Now I want to put all of that in the /*comment*/ so the released program won't run those code any more (but still keep szTest so I can use it for future develop testing).
So Here what I want after using the Find and Replace Box:
//String szTest; //Manual
/*szTest = "Yellow banana";*/ //use find and replace
/*szTest = "Blue monkey";*/ //use find and replace
/*szTest = "Red mango";*/ //use find and replace
I think I can do this with Regular expressions or Wildcards. But I don't know how to find and replace any string between " and ".
Find: szTest = " ??Any string?? ";
Replace with: /*szTest = " ??Any string?? ";*/
Thanks for reading.

Hi Nathan.j.Smith,
Based on your issue, I suggest you can try the Joel's suggestion check your issue again. In addition, I find a MSDN document about how to use the Regex.Replace Method to match a regular expression pattern with a specified replacement string,
maybe you will get some useful message.
https://msdn.microsoft.com/en-us/library/xwewhkd1(v=vs.110).aspx
If the above suggestion still could not provide you, could you please tell me what language you use to create the program for finding and replace any string using regular expression so that we will find the correct programming develop forum to support this
issue?
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to find and replace text in Excel with Automator

I am new to Automator. And I would like some help how I can create a service that will allow me to find and replace certain text in Excel. I noticed that there is an action to do this for Word documents, but not for Excel document.
Any suggestions how I can do this?
Thanks so much for your help.

Easiest way to do it is the following:
- Open the PDF file in Acrobat.
- Go to Tools - Forms - More Form Options - Export Data.
- Save the form data as an XML file somewhere on your system.
- Open XML the file in a plain-text editor (I recommend Notepad++).
- Let's say you want to replace all the years in the dates from "2013" to "2014". Do a global Search&Replace of "2013-" to "2014-" (I added the dash just to make sure that only date fields are edited).
- Save the XML file (maybe under a new name).
- Go back to the PDF file, and now go to Tools - Forms - More Form Options - Import Data.
- Select the edited XML file and import it.
- Done!

How to find and replace multiple cells at a time

I am doing repetitive work re find text in numbers but then replace following cells with text. How can I find and replace multiple cells at a time?
i.e. doing my own budget spreadsheet and coding all transactions with description and code

Did you try the "Find/Replace" dialog box?:
Then click the "Replace All" button in the bottom left.

How To: Find and replace multiple words in one Click ?

I have an file with about 150 Pages where I want to replace a word about 500 time by one click.
Find and Replace works but only with one word.
How can I do it by one click ?

You can't, not in Acrobat anyway.
This is the kind of thing that should be done in the original file format,
not in a PDF.

How to find and replace certain text in Excel.

I am new to Automator. And I would like some help how I can create a service that will allow me to find and replace certain text in Excel. I noticed that there is an action to do this for Word documents, but not for Excel documents.
Any suggestions how I can do this?
Thanks so much for your help.

Marga,
I think the best place to ask about Office for Mac would be in the MS forums.
Jerry

[Forum FAQ] How to find and replace text strings in the shapes in Excel using Windows PowerShell

Windows PowerShell is a powerful command tool and we can use it for management and operations. In this article we introduce the detailed steps to use Windows PowerShell to find and replace test string in the
shapes in Excel Object.
Since the Excel.Application
is available for representing the entire Microsoft Excel application, we can invoke the relevant Properties and Methods to help us to
interact with Excel document.
The figure below is an excel file:
Figure 1.
You can use the PowerShell script below to list the text in the shapes and replace the text string to “text”:
$text = “text1”,”text2”,”text3”,”text3”
$Excel
= New-Object -ComObject Excel.Application
$Excel.visible = $true
$Workbook
= $Excel.workbooks.open("d:\shape.xlsx")
#Open the excel file
$Worksheet
= $Workbook.Worksheets.Item("shapes")
#Open the worksheet named "shapes"
$shape = $Worksheet.Shapes
# Get all the shapes
$i=0
# This number is used to replace the text in sequence as the variable “$text”
Foreach ($sh in $shape){
$sh.TextFrame.Characters().text
# Get the textbox in the shape
$sh.TextFrame.Characters().text =
$text[$i++]
#Change the value of the textbox in the shape one by one
$WorkBook.Save()
#Save workbook in excel
$WorkBook.Close()
#Close workbook in excel
[void]$excel.quit()
#Quit Excel
Before invoking the methods and properties, we can use the cmdlet “Get-Member” to list the available methods.
Besides, we can also find the documents about these methods and properties in MSDN:
Workbook.Worksheets Property (Excel):
http://msdn.microsoft.com/en-us/library/office/ff835542(v=office.15).aspx
Worksheet.Shapes Property:
http://msdn.microsoft.com/en-us/library/office/ff821817(v=office.15).aspx
Shape.TextFrame Property:
http://msdn.microsoft.com/en-us/library/office/ff839162(v=office.15).aspx
TextFrame.Characters Method (Excel):
http://msdn.microsoft.com/en-us/library/office/ff195027(v=office.15).aspx
Characters.Text Property (Excel):
http://msdn.microsoft.com/en-us/library/office/ff838596(v=office.15).aspx
After running the script above, we can see the changes in the figure below:
Figure 2.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thank you for the information, but does this thread really need to be stuck to the top of the forum?
If there must be a sticky, I'd rather see a link to a page on the wiki that has links to all of these ForumFAQ posts.
EDIT: I see this is no longer stuck to the top of the forum, thank you.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

How to find and replace the text present in the url

I have a column of type NCLOB with some text having url's in between as shown below:
========================================================================
This text is for testign purpose.This text is for testign purpose.
<A PL/SQL <U PL/SQL </U> </A>
Thsi text is also for testign purpose.This text is for testign purpose.
<A http://forums.oracle.com> <U oracle metalink> </U> </A>
This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.
========================================================================
Requirement:
========
Requirement is to implement the find and replace functionality.
I just need to check whether the search text is present in the url or not?
Suppose if search for orcale.com, since its part of the url so the search should be successful otherwise search should be unsuccessful.
Here I can give you the hint like, always the url lies between the anchor tags *(<A </A>).*
Tahnks in Advance.

I had I think a similiar question the other day thay I Frank and Michaels answered for me.
not sure if I totally have what you want but.
WITH t
        AS (SELECT '<A PL/SQL <U PL/SQL Thsi text is also for testign purpose.This text is for testign purpose.
<A http://forums.oracle.com> This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.
                      txt
              FROM DUAL)
SELECT REGEXP_SUBSTR (REGEXP_REPLACE (txt, '(.*<A)|(</A>.*)'), 'oracle.com')
FROM tthe first part the regexp replace part gets the text between a start and end point you mentioned that would be <A and </A>
the regexp substr just looks for the phrase oracle.com in the text between those two points.
Edited by: pollywog on Oct 6, 2010 8:26 AM

How to find and replacing the path (url) given for data binding from type 'datasocket'

Hi everyone,
I'm sorry to pose this question as my own knowledge is still very limited.
I have an assignment (bachelor level). We were asked to adjust a plc program in step7 so that multiple of an existing sequence could be run indepently.
The settings for that sequence are controlled by labview. Sensor data is also viewed in labview.
There is an existing labview VI that was made by someone else before us. It uses 'Datasocket' type for data binding. Because we would like to adjust this VI to be used with the other sequences, we would like to change the original path or URL quickly, as in a 'Find&Replace' solution. Yet the find and replace only works for objects or text, not entries in the properties.
Can someone please tell me if there is a way to do is, without having to use shared variables, as we are not at all known with this type.
Many thanks,
Niels

Dear Niels,
Please find the attached example. I placed 5 controls on the front panel, all with a data socket URL (control 1 = URL1, control 2 = URL2 etc). Through property nodes I did the following;
- I got a reference to the front panel
- with this reference we can get an array of references to the controls on this front panel
- one by one we will read the references and check the data socket URL from the control, we compare this with the URL we are searching
- if found, stop we will use the reference to write a new URL to the control.
Please notice the default values of the controls; it is set to search for URL3 and replace this with URL10, run the VI once and you will see that happening. I also included a sting indicator which will show you the label of the control which we find. Also a Boolean indicator in case we were not able to find the URL.
I downsaved the VI to 8.6, I'm not sure in which version you are working, if you have 8.6 or higher you are able to open it. Hope this brings you further,
Best regards,
Martijn S
Applications Engineer
NI Netherlands
Attachments:
findURLexample.vi ‏12 KB

How to find and replace with sequential values?

im building a website. it contains 12 main images per page and luckily according to my design the source code per page contains 12 <img> tags only (rest is background and stuff). now for many pages i keep using a particular page as template and then change each and every image by browsing and clicking. Now i want to make my work easy.
the images that i want to add in every page are sequentially file named. 001.jpg , 002.jpg .......... and so on.
So is there some way that i can use find and replace , to find the <img> tags and fill them all with values sequentially that is the first <img> tag containts 001.jpg and the second containts 002,jpg and so on .
the pages are many thats why i want to make this easy
thanks very much for help

Will they ever do this? I just wish Adobe would purchase TextPad and integrate it into Dreamweaver. In TextPad, from the manual:
Other TextPad options in the replacement string:
\i Generate a sequence number.
\i(N,M) Ditto, starting at N and incrementing by M.
So beautifully simple.

How to find and replace the main logic board on HP4600N Laser Printer.

Can anyone let me know how to replace the main logic board on my HP Laser 4600 N. My printer was freezing up and in calling customer service, they informed me that the main logic board is going bad. Now I have the part but no instructions on how to replace or where to find it on the printer.

A Google search may turn up a downloadable service manual for the Laserjet 4600.
You might also ask in the HP Enterprise Business Community Forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to find package replace date time

hi, We frequently send changed ssis packages to our DBA's to replace the one's in the msdb folders. They then do the import/replace using sql studio. We use sql server 2008. Sometimes they forget or miss a package and we need some way to check/validate.
When we do a right click generate report on the package the package creation date is always the same. What is the best way to find out if a package was replaced and when ? Is there any sys tables we can query for this info. Thank you

If the package is in File System then Modified date can be noticed there. Or else another way would be to edit the package and check VersionBuild/VersionComments properties.
If packages are deployed to MSDB, sysdtspackages90 table just keeps track of Created date and there's no modified date.
Hope below similar thread help you:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/16d5ce0d-74ae-4292-9edf-b0c12fdc2752/last-modified-date-on-ssis-package-on-the-server
http://serverfault.com/questions/99681/can-i-tell-the-last-modified-date-on-an-ssis-package-from-integration-services
Cheers,
Vaibhav Chaudhari
[MCP],
[MCTS], [MCSA-SQL2012]

SharePoint Calc Column - How to Find and Replace ANY & ALL Values with Something Else

Haven't found a solution on this even though it seems like it should be cut and dry.
I have a column containing characters "-" (e.g., XXX123-123-fjhrh-sdafsdfsd). I want to find every "-" and replace it with "@". Seems easy but so far haven't found a solution. My calc column always seems to stop at the first
occurence of "-" and only replace that one. Seems every forumula wants you to tell SharePoint where to start (position). You can't simply tell SharePoint, Find this "-" ALL OCCURENCES and replace with this "@" ALL OCCURENCES.
I don't have the option of saying start at this position because my data is not the same in every cell/field (e.g., number of characters).
Closest I've gotten is this:
=REPLACE([IN THIS COLUMN],FIND("-",[IN THIS COLUMN]),LEN("-","@")
RESULTS:
XXX@123-XXX-123

Hi JJSHAREP,
The formula only works when there are only three "-" in the column value, and the formula will fail if there are more than or less than three "-" in the column value.
I recommend to use Jquery code to replace the characters in the column called IN THIS COLUMN in the UI:
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(function () {
var Index=0;
$(".ms-listviewtable tr th").each(function(i){
if($(this).find("div").attr("name")=="IN_x0020_THIS_x0020_COLUMN"){
Index=i;
$(".ms-listviewtable tr").each(function(i){
if(i>0){
var value=$(this).find("td").eq(Index).text();
var value1=value.replace(/\-/g, '@');
$(this).find("td").eq(titleIndex).text(value1);
</script>
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Anyone know how to find and replace a hard drive cable fo an HP Pavilion zv5160us laptop?

I received message that my hard drive had failed. I ordered an identical drive and replaced it. I now get error message:
PXE-E61: Media test failure, check cable
PXE-M0F: exiting PXE ROM
The recovery disks will not reformat the drive. What does the cable look like. Can it be replaced? Where could I find one?
Thanks for any help as I have bought new hard drive, more memory and recovery disks. Hate to lose my investment completely. Should have just bought a new laptop!

Hi,
Should be ok to put new WD HDD on your dv6 machine. All connectors are standard. Please watch the following videos to see some idea of this work:
http://www.youtube.com/watch?v=CP0WYzpKYKk
http://www.youtube.com/watch?v=QQx7PlIXFuE
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Font missing, how to find to replace?

Similar Messages

Maybe you are looking for