Font missing in Firefox 5.0.1 after Lion install (It displays in Safari.)

A website I often visit uses the Baskerville font. It displayed fine on Firefox 5.0.1. After the Mac OSX Lion install, Baskerville no longer displayed -- the site showed the Times New Roman font instead. For comparison, Safari 5.1 correctly showed the Baskerville font on this website. What can I do to make the Baskerville font display correctly? This could also be an issue for customized font families on other websites, so knowing the solution to this problem might help. Thanks.

Psst...does anyone have insight on this problem? I've researched the Web the last few days and have found no satisfactory solution. In addition, I found on the website I referred to in my original post that the font for the h1 heading also changed - still shows properly in Safari 5.1. Would appreciate a response from an expert here. Thanks so much.

Similar Messages

I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP!

I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP! edit

-> [[Firefox is already running but is not responding]]
-> Profile in use
* http://kb.mozillazine.org/Profile_in_use
Check and tell if its working.

Every time I click on Firefox a box pops up asking me if I will allow changes to my computer from firefox This started happening after I installed firefox 5

Every time I click on Firefox a box pops up asking me if I will allow changes to my computer from firefox This started happening after I installed firefox 5 e

Check that you do not run Firefox as Administrator. 
Right-click the Firefox desktop shortcut and choose "Properties". 
Make sure that all items are deselected in the "Compatibility" tab of the Properties window. 
* Privilege Level: "Run this program as Administrator" should not be selected 
* "Run this program in compatibility mode for:" should not be selected 
Also check the Properties of the firefox.exe program in the Firefox program directory.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

Tie Machine no longer backs up after lion install

After Lion install, Time Machine no longer backs up-will start to back up but freezes after a few kb's-spinning clock will spin 24/7 but backup is stalled

See the green box in #D2 in Time Machine - Troubleshooting.

Time Machine not working after Lion install

After Lion install at first Time Machine would not back up-then it did, but backed up the entire HD-now Time Machine will no longer function in trying to retrieve any data from Mail or anything else

After consulting with maker of back up drive (LaCie) I opted to format the drive. Lost some stuff but nothing critical. I then backed up and now all appears to be working, i.e drive is backing up and Time Machine is now functioning.

No sound in garageband after Lion install.

No sound in garageband after Lion install, can anybody help please?

12 hours ago my midi played through Garageband with no problems. Today it does not play. The Garageband window shows that the keys are being played.
In the moments following I turned on iTunes and all was fine so I burned a disc in my usual factory installed burner, late 2008 iMac, and the message was "no disc burner found". I turned iTunes on and off and same message. Ran Disc Utility and no flags. I am using the Disc Utility that is on my desktop. Is there a hidden Lion disc utility? Nothing worked unless there is a hidden function.
I was able to burn using Toast. This would indicate that the problems is with iTunes 10, OS 10.7.1

Netflix plug in error after lion install

What is the fix for Netflix plug in error after lion install?

I reinstalled the plugin from a Netflix email, still get this problem:
I don't have private browsing on, by the way.

Hi, after I installed IOS 7, my safari homepage is shown in Chinese. How to change it to English?

Hi, after I installed IOS 7, my safari homepage is shown in Chinese. How to change it to English?

Hi everyone,
I just ran across this issue myself. Very odd to say the least. The language seems fine everywhere except the "favorites" which appear when you open Safari without a current website open. (kind of similar to where a home page would appear). These are not the same as all of your bookmarks, they are more of a "bookmarks bar" equilvalent that you would see when opening a new tab.
I tried it all to fix this, only to find that Apple is currently investigating the issue.
For those having this issue, you can call AppleCare, (even if you are out of warranty, since this is an iOS 7 issue, atleast for US and Canada customers) to get assistance. 1-800-APL-CARE for US and Canadian customers. It seems Apple's Engineering team is collecting data on this issue right now, though I am not aware of exactly what is being employeed to fix it.
If you don't want to call AppleCare or visit an Apple Store, I will say from personal experience that all of the basic troubleshooting steps failed to fix this issue.
It seems you may want to consider creating an iCloud or iTunes backup. I would also strongly recommend that you sync with iTunes, transfer your purchases in iTunes, and import your camera roll to a computer. And then restoring your device as new using iTunes. And after the restore try restoring from your iTunes or iCloud backup. This should take care of it.
However in extreme cases, it can take restoring and setting up as a new device (and syncing all the data you can back instead of using any kind of backup) to resolve stubborn issues, when they are based in your settings or content.
I hope this helps a little.

I can't find iSync after lion install

I can't find iSync after lion install. I try too sync with my N8 Nokia. The program iSync dont appear in program mapp.

It's Apple's software not yours and as shown by it's exclusion on the OS X Lion pages is not part of the new OS. Upgrading to Lion is optional.
It's a trivial matter to copy it back from your Snow Leopard backup, but using it under Lion is not supported at all and WILL stop working sooner or later.
Why would it be sensible for Apple to include software in their new OS that they know will stop working?

IPhoto 8.1.2 Double Library File After Lion Install

Hi, After Lion install I'v got a double iPhoto Library File in iPhoto 8.1.2 whil I have only one library.
Is this normal ? Is there a way to get rid of one of the two files or to combine them ? On other Macs only one file shows up.
See screenshots.
In the Finder only one iPhoto Library appear in the images file.
This is the content of the IPhoto Library package :

That's an issue with the Dock. I would trash the Dock caches. I would post on the Using Mac OS X forum for more on that.

I am having trouble opening Adobe Reader after I install it in my Safari.

I am having trouble opening Adobe Reader after I install it in my Safari. I have installed reader about 10 times now and it says I can use it now, but when I try to open a file it tells me I need to launch Reader and Agree to terms. I really need to use it now for school. Please help. Thank you, Heather

You need to open Reader outside of Safari Start>All programs and accept the agreement.

Office not starting after Lion install - PowerPC issues?

I have an Intel MacBook Pro (Intel Core 2 duo)
It was running OK on Snow Leopard.
I had Office (do not remember exactly which version, but recent).
After Lion installing, I cannot open any more any of the Office applications.
This is the message I get
You can't open the application Microsoft Excel because PowerPC applications are no longer supported.
What is worse is that not even the Microsoft Autoupdater opens up as well.
I never used a powerpc chip. I am surprised to read in the System Information that this is the setup for Excel
Microsoft Excel:
Version:          11.6.4
Last Modified:          4/5/11 4:19 PM
Kind:          PowerPC
64-Bit (Intel):          No
Get Info String:          11.6.4 (110422), © 2004 Microsoft Corporation. All rights reserved.
Location:          /Applications/Microsoft Office 2004/Microsoft Excel

Hardcyber wrote:
Microsoft Excel:
Version:          11.6.4
Last Modified:          4/5/11 4:19 PM
Kind:          PowerPC
64-Bit (Intel):          No
Get Info String:          11.6.4 (110422), © 2004 Microsoft Corporation. All rights reserved.
Location:          /Applications/Microsoft Office 2004/Microsoft Excel
As the last line (above) states, you are using Office 2004, and that will not run on Lion, upgrade to Office 2011 or Open Office or Neo Office or Libre Office.

Have an original iPhone 3G. Can you still sync iTunes (10.6) and Contacts after Lion install?

Have an original iPhone 3G. Can you still sync iTunes (10.6) and Contacts after Lion install?

An older iTunes will not open the library once used by a newer version.
iTunes 10.6.3 will work with iOS6 as long as the hardware doesn't post-date the release of 10.7 Use iTunes 10.6.3 on both machines.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

Font missing in Firefox 5.0.1 after Lion install (It displays in Safari.)

Similar Messages

Maybe you are looking for