Font names not shown in Spotlight search

Whenever I perform a search with Spotlight font names are not shown, see image below.
Does anyone have an idea what's causing this?

Hi Xergio,
Apparently this bug is gone in Mavericks:

Similar Messages

Screen Variant BBPCF02 Vendor name notly shown

Hi Guys,
I am new to SAP SRM...
I got a issue that "We need to have the Vendor name on the search result for transaction BBPCF02 & Screen Variant BBPCF02 Vendor name notly shown.
can you guide how to solve this issue. I have posted the issue in SRM.. But i am not getting any response.. Since it was very urgent for me, I am posting this issue in this forum
Thanks in Advance

close

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

Embedded Fonts are not shown anymore

When I create a PDF from a Word Doc, the embedded Fonts are not shown anymore. In the previous Version it was working perfectly. My version is currently 11.0.10.

Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

Report - Primary User is name not shown

Hey there,
I've got a problem with the reporting Server functions.
When creating a report containing "Primary User Name (Calculated)" there is no data shown within this column. If I add "Is Primary User Calculated?" I get "YES" for every Device name that has its Primary user detemined already - but the rows for "Primary User Name (Calculated)" stay empty.
The Information from "Is Primary User Calculated?" seem to be right, when checking Devices/Workstations/... within ZCM, and the Primary User Names are shown there.
Does anyone encounter this problem before and/or got a solution?
regards,
alex

schiggieh,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Interface mapping not shown in directory search help

Hi,
I creatd a interface mapping in repository with message mapping. but when i configure the directory for receiver determination .. the interface mapping is not shown when i click the search help.
pls any one help me .
thankx,
shree

Hi Shree,
Three checkpoints:
1. Make sure you have entered the correct outbound and inbound interfaces.
2. Make sure you have activated your interfaces and mappings.
3. Make sure the cache is up-to-date (you can refresh cache by transaction sxi_cache).
Hope this helps.
Regards,
Hart

Name not shown

Once i Plug in my ipod my name is not shown where it is somewhere near genius on itunes and then their is something else that pops out that supposed to say "my name device" etc.... but it says someone else's.

Hello!
Here is a KB that discusses that situation:
KB25711 Caller ID displays only the phone number and not the contact name for incoming phone calls
Unfortunately, it contains nothing useful -- well, except for formal acknowledgement from BlackBerry of the issue. I guess that's something at least.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TIF metadata not found in Spotlight searched (JPEG okay)

Hi,
We've been trying to use Spotlight to help manage our collection of digital photos. All of our photos are imported from raw format and edited in photoshop, during the process adding a description, keywords, etc. (in an XMP extension), and then save as TIFFs. We had hoped to use Spotlight to be able to search through this metadata, but it doesn't seem to be able to read our entries. 'mdls' reveals an incomplete set of metadata. If the images are saves as JPEGs, however, it works - description and keywords are searchable using Spotlight and 'mdls' gives a complete set of metadata. In addition, if we then use Photoshop to convert the TIFFs to JPEGs, there is no problem, so the data clearly aren't missing.
Does anyone know what is wrong? Is the implementation of Spotlight searching of TIFF metadata incomplete? Is there something about these parts of TIFF metadata that is incompatible with Spotlight? Is there any way around this? As far as we can tell, the TIFF problem has been around for all versions of Tiger (10.4 - 10.4.6).
Regards,
-Karl & Linda
MacMini 1.42 GHz Mac OS X (10.4.6)
MacMini 1.42 GHz Mac OS X (10.4.6)
MacMini 1.42 GHz Mac OS X (10.4.6)

Karl & Linda,
Welcome to Apple Discussions. It is possible that the problem you are experiencing will generate many replies that will take you far away from what you are actually trying to do. Spotlight is notoriously unreliable and uncooperative, and presents many problems.
In the interim (while we all wait in hope that Apple will smell the coffee), the usual thing seems to be to download a piece of freeware called EasyFind, which you can get at VersionTracker.com.
EasyFind finds files. Which is more than can be said for Spotlight. If you are dissatisfied with Spotlight you are advised to email Apple directly, from this Support site, describing the issue.
I hope EasyFid works for you.

USB device name not shown in VISA control

Dear All,
I'm trying to control a lighting controller unit which used as a configurable power supply for a LED light panel.
The model is TMS Lite TMS-LC-15-4CH-A1.
It is not a popular device i guess so it doesn't have a labview driver like Agilent, GwInSTEK etc.
As usual i install the usb driver and demo software then i'm able to control the device using demo software.
Then i open my labview 2012 and select a VISA open, i created a VISA control and i expect the device ID to be shown for me to select. (Just like what i usually do for most of the agilent devices).
However this time it does not shown.
I'm stuck and i really hope someone can help.
Thanks!!!

Is it possible that the demo software you got to work isn't releasing the COM port resource? Have you tried rebooting the computer, and then looking in MAX and the VISA control for the COM port? Doing this after running the demo software may prevent it from being found if the demo software doesn't release the resource.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Spotlight Comments do not appear in Spotlight search results

I have a .png file on my desktop.
Right click >> Get Info
Spotlight Comments has the string 'Fruit' saved.
If I search for 'Fruit' in Spotlight I get no results, why?

Hi TD
Yes and no.
Yes it worked the way you mentioned but if I change the Spotlight Comment: on the same file to something else I can still find it via 'Fruit'. I much prefer command-space bar to call Spotlight.
How long does it take a change to a Spotlight Comment: to filter into Spotlight?
Its not the end of the world its just I was finding Spotlight really useful until I came up against this.

Group names not shown in Win-Taskbar anymore

with the Tab-Groups-Feature the came a very clever invention: the group-names were used for naming the FF-Task in the Windows-Taskbar.
like the format: [groupname]:[Tabname]
but since FF9/10 only the Tabname is used to name the Task ,-(
can that be changed with any trick?
is there an option in about:config or a config-file to use the "old" Taskbar-Renaming-Style?

I am not entirely sure, but this menu should change that preview in your OS:
Control Panel > Taskbar > Taskbar Properties > Jump Lists change the number from 10 to the number of tabs
If it doesn't please see Windows support for help.

R/3 Table name not shown in RSO2

I have a Z Table in my R/3 system which I can see from SE11 but when I try to create a Data Source from RSO2 with Create Data Source from DB table or view, it doesn't show that table name in the list.
Do I have to create a view for that Z table or can I pull the data directly from the table?
Please help !

HI,
    Make sure ur table is active.
    or
    I think u have saved as a local object (tmp), so that it is not displaying in the RSO2 transaction. u can directly enter the name of the table u will get a information popup "Database table ZDANGER is a local object" press continue.
u will able to use the table for generic datasource.
regards,
Md Zubair Sha

Rollback segment number not shown with name " not shown " too small

Hi,
we have a table TABLE1 with a BLOB field FIELD1 on a Oracle 10g database. Today we found out that there is one record in that table that make problems. if we try to read the BLOB data from that record, Oracle shows the error:
ORA-01555: snapshot too old: rollback segment number with name "" too small
The strange thing about it, that the message shows neither the segment number nor the segment's name. Like it has lost the reference to it.
Could you help please.
Notes:
The TABLE1 and the BLOB data are really not big.
The UNDO tablespace is 2Gb big and just 1% used.
Thank you very much
Igor

Out-of-row LOB undo is maintained in the LOB segment. So the UNDO tablespace and undo retention is not associated with most LOB ORA-1555 issues. Instead the LOB column is created using either PCT_VERSION or RETENTION to manage how much space within blocks or time transpires before the LOB undo is overwritten. In environments with high updates, deletes on rows including LOBs, the chances of ORA-1555 on LOB undo is very high.
Source:http://blogs.oracle.com/db/entry/troubleshooting_ora_1555
In the above link you will get plenty of good metalink notes to understand and solve the issue.
There is no undo segment name in the error message means this error has no relation with undo tablespace/parameter/segment. This might mean that your LOB table is corrupted. Can you drop and recreate/re-populate this table and try again ?
Srini Chavali @ Another "snapshot too old: rollback segment number with name "" too small"
Regards
Girish Sharma

6300 callers name not shown

hi,
i bought a nokia 6300 two days ago and have been registering it and moving my numbers across etc. but one thing i can't seem to do (and it sounds really silly) is get a callers name to appear when they ring me. whenever i receive a call, the phone rings and just says "call" but no name or number. i've tried saving my numbers to the phone memory, sim memory and both, but nothing has worked. tried different profiles and themes, but the same thing happens. any suggestions?
thanks
beth

thanks for that, although i've tried that and it hasn't made a difference. i've received calls from around 10 people and none of the names have been shown. i've tried changing my friend's phone id, and have had her ring other people, and her id comes up on everyone elses phone. i did the same with my parents phones, and the same thing happened... it's really annoying!

My name not shown on outgoing email

I used the email set-up function to set up two separate email accounts - one is Gmail, the other my work email. I'm not using Blackberry Enterprise Server.
I used the Gmail option to create my personal account and once Gmail was created, in "Options" it gave me the option to add my name to the "From" field.
I used "Other" to set up my work email and in my work email, the option to add my name is not given. When I send out email using my work email account, the email is received from "[email protected]" rather than "First Name, Last Name".
Is there a way to add my name to the "From" field in my work email?
Thanks in advance all for your help.

Tobey wrote:
I used the email set-up function to set up two separate email accounts - one is Gmail, the other my work email. I'm not using Blackberry Enterprise Server.
I used the Gmail option to create my personal account and once Gmail was created, in "Options" it gave me the option to add my name to the "From" field.
I used "Other" to set up my work email and in my work email, the option to add my name is not given. When I send out email using my work email account, the email is received from "[email protected]" rather than "First Name, Last Name".
Is there a way to add my name to the "From" field in my work email?
Thanks in advance all for your help.
Hi and welcome to the forums!
What type of account is the Gmail setup as? (POP3, IMAP)?
What type account is the work account?
What format is your name listed when you send the email from your desktop?
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Font names not shown in Spotlight search

Similar Messages

Maybe you are looking for