Font not displaying on Reports Output (RHEL 5) for 10g

Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
Chris

They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

Similar Messages

Icon not displaying in Report Output

hi,
I have program which i m using
PERFORM set_expcol(rsaqexce) USING %alv pb%exco.
CALL FUNCTION 'ICON_CREATE'
       EXPORTING
         NAME                        = icon_data_area_expand
       TEXT                        = ' '
        INFO                         = text-200
       ADD_STDINF                  = 'X'
       IMPORTING
         RESULT                      = button
     EXCEPTIONS
       ICON_NOT_FOUND              = 1
       OUTPUTFIELD_TOO_SHORT       = 2
       OTHERS                      = 3
icon_data_area_expand = @K1@
Button: @K1\QExpand@
Because of this icon is displaying with the text @K1\QExpand@

Hi,
I think u r using PF-STATUS parameter in function module,
if u use this parameter, you sholud give the icon name etc..
otherwise by default it will appear.
Check your code again.
Give me exact requirement, if possible paste the code.
Regards,
Chandu

Barcode font not visible in Bursting output file

My requirement is to email the xml report output to mailing list. I have attached the bursting control file to do this. But the email attachment file is not showing the barcode font.
I have defined the font and font mapping set and updated the mapping set to the template code using the configuration setup. With this i m able to see the barcode font in the xml report output. But the email attachment is not showing the barcode font.
I followed the method2 mentioned in the below link,
http://blogs.oracle.com/xmlpublisher/2007/09/bursting_barcodes.html
and font file in JRE_TOP/lib/fonts directory and placed the xdo.cfg file in JRE_TOP( in my client instance its called as AF_JRE_TOP). But still the email attachment did not show barcode font.
Please let me know if any of the steps requires changes. Kindly assist me to get the barcode font in the bursting output.
xdo.cfg file contents as follows,
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">

<properties>


<property name="system-temp-dir">/tmp</property>

<property name="pdf-compression">true</property>

<property name="pdf-security">false</property>
<property name="pdf-open-password">user</property>
<property name="pdf-permissions-password">owner</property>
<property name="pdf-no-printing">true</property>
<property name="pdf-no-changing-the-document">true</property>
</properties>

<fonts>
<font family="Free 3 of 9 Extended" style="normal" weight="normal">
<truetype path="/fonts/FRE3OF9X.ttf" />
</font>
</fonts>
</config>
Edited by: 830913 on Jan 24, 2011 9:46 PM
Edited by: 830913 on Jan 24, 2011 9:50 PM

Never Mind. I forgot to do font mappings :( (duh!!)

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,

I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report.

My code not give error nut not give pdf report output

hi master
sir see my code not give error nut not give pdf report output
String reportSource = "./WEB-INF/reports/mfa.jasper";
String reportDest = "./reports/mfa1.html";
Connection conn = null ;
Statement msqlStatement = null ;
ResultSet mrs = null ;
Connection mconn = null ;
ExternalContext econtext = getExternalContext();
InputStream stream = econtext.getResourceAsStream(reportSource);
if (stream == null) {
throw new IllegalArgumentException("Unknown report name '" + reportSource
+ "' requested");
try {
String mfat = ac_categoryDataProvider.getCachedRowSet().getDataSourceName();
javax.naming.Context mctx = new javax.naming.InitialContext() ;
DataSource mds = (DataSource)mctx.lookup(mfat);
Connection mcon= mds.getConnection();
mcon.setAutoCommit(false) ;
JasperPrint jasperPrint = null;
//getSessionBean1().getTripRowSet(),
//getSessionBean1().getAc_categoryRowSet(), mfat getSessionBean1().getAc_categoryRowSet()
jasperPrint = JasperFillManager.fillReport(stream, null,mcon);
JRExporter exporter = null;
HttpServletResponse response = (HttpServletResponse)econtext.getResponse();
FacesContext fcontext = FacesContext.getCurrentInstance();
exporter = new JRPdfExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_STREAM,
response.getOutputStream());
exporter.exportReport();
fcontext.responseComplete();
} catch (Exception ex) {
log(" Error Description" , ex);
error("Error counting rows: " + ex.getMessage() );
error("Error counting rows: " + ex );
please give me idea
thank's
aamir

Thanks Sven.
The query works but the other way. The output is for all the targets, not for the respective target which we select from :p1_target.
select target_name,target_type, column_label,
warning_threshold,critical_threshold,occurrence_count
from sysman.MGMT$TARGET_METRIC_SETTINGS@crmodem
where target_name in (select MEMBER_TARGET_NAME from MGMT$TARGET_FLAT_MEMBERS@crmodem
where upper(AGGREGATE_TARGET_NAME) like '%X' || :P1_TARGET || '%')
Thanks again.

Value not displaying in report whereas it returns in plsql developer

HI

Duplicate post.
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer

Formula not displaying in report

Hi ,
I have used the NODIM data function in my formula and now the report is not displaying the formula column in report in first screen. I have to select the filter value from structure.
I have already made the formula as Always show , still its not displaying.
I have tried creating the CKF and that too is not displaying in report in first screen. I always have to select it from filter.
What could be the reason..? Are there any query setting I am missing..?
When I use the KF , it is displaying properly.
Please help.

HI,
AS YOU SAID U R CREATING FORMULA USING NODIM FUNCTION IF U R CREATING AT INFOPROVIDER LEVEL THAT IS CALULATED KEY FIGURE , AFTER CREATING CKF U JUST DRAG CREATED CKF TO COLUMNS AREA AND SAVE AND EXECUTE, ITS DISPLAYS THE KEYFIGURES. U ARE JUST CREATING FORMULA FOR KEYFIGURE NOT CHARACTERISTIC SO NOT THOUGHT OF FILTERS.
HOPE THIS HELPS .
Regards,
supriya.

AFTER LOADING THE DATA INTO THE INFOCUBE IT SHOULD NOT DISPLAY IN REPORTING

Hi experts,
I have the data in infocube. When i selected the cube in reporting it should not display i.e; the data should not display in reporting.
thanks nd regards,
venkat

Bit strange requirement. But if you have data in Cube and automatically its will be available for Reporting. unlike ODS, we do not have option of "Automatic request activation".
However on repoeting side, you can restrict the values to # and exclude everything from slection. But not good solution as such.
Regards
Pankaj

Field of character length 255 not displaying in ALV output

Dear all,
i am trying to display a field of ztable with lenght 255 character, same is not displaying at ALV output.
it is displaying only upto 128 characters in ALV output.
table is Ztable-zfield with CHAR255 length.
please help me.
Regards,
Sam.

Hi Sam Johny,
In ALV Grid the maximum characters can be displayed in one column is 128 Characters..
But for your solution you can press Print Preview Button to view more text(or Press Ctrl + Shift + F10 )...
Else try with ALV LIST
and pass FIELDCAT-OUTPUTLEN = '255' for field in fieldcatalog
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

My IPhone 4's mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. What is wrong with it?

My work recently decided to buy every full time employee an IPhone 4 to be used for work purposes. (I do suspect these are refurbished, but I don't think that matters) I have had no trouble with it, except for on occasion the mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. You know what I'm talking about...that bar at the bottom of the mailbox when you open an email that you use to delete, respond, forward, move, etc. It just goes away for no reason, and then reappears for a day or two, and goes away again. It is quite annoying since I can't respond to any of my emails without getting on my work computer. If you have any suggestions, please help!

Hi there,
You may need to force close the Mail application when this happens. The next time this happens, use the steps in the article below to coles out of the mail application.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Hope that helps,
- Griff W.

Custom fonts not displayed when PDF is generated using 10g Report builder

Hi
I have two fonts , abc.ttf and def.ttf which I have placed under C:\Windows\fonts. One of these displays a logo and the other displays barcode
I have added the environment variable REPORTS_PATH which has value C:\Windows\fonts. I have also added entries for PDF Subset in uifont.ali.
But still when I run the report and out to a PDF file, the fonts are not displayed. They are remapped to some other fonts.
When I check PDF document properties in Adobe reader, under fonts tab it says
abc
   Type:Type1
   Encoding:ANSI
   Actual Font: Adobe Sans MM
   Actual Font Type : Type 1
def
   Type:Type1
   Encoding:ANSI
   Actual Font: Adobe Sans MM
   Actual Font Type : Type 1
uifont.ali entries
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file
# Arial = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
abc= "abc.ttf"
def="def.ttf"
In Oracle reports builder, I am able see these fonts and select them in my report layout
I am able to see the fonts in Preview/screen output while running RDFs in my reports builder, but PDF output doesnt display these fonts
Is there anything else which is required to do ? Do I need to restart the machine after environment variable is added ?

In one PC were Report Builder is installed, we see "COURIER NEW - WESTERN" font and the RDF created / saved in that font works fine on server. I don't know if this helps!

Can not display BI report in Web ui

I created reporting profile with both bi and interactive reporting active and assigned to the business role functional profile
I gave the BI connection client in the report that I wanted. When I select the report in webu ui, it's taking me to a sign on pad. I assume this for BI sign on pad and When i enter sign on, it's not taking me any where.
This just a standard report in CRM My top 5 quotations. All necessary steps in basic bi connection, basic sales analytics are done too
How does the the connection between BI and crm works?
Please advise

Hi Experts,
We are using Webiu 2007 with BI 7.
We linked our sandbox to RWT system to test the report output. In my CRS, I have source system RWT defined and the same way in BI also we have assigned CRS to link these systems together. It is my understanding that when we select the report, we are just calling the from BI into CRM. I have done the following steps in CRM
1) Created reporting profile in CRM analytics as both BI and CRM interactive reporting activated
2) Assigned this reporting profile to business role
3) I selected My-Top-5 quotation report and gave the BI system in display bi reports
4) I can see the report on webui.
Problem: When I selected the report, a logon pad appears and I enter RWT user id and password, it's doing nothing. But, I have another user who is logging in for the first time got an error "Error loading template "OTPLB_OCRM_QUTO_Q0001_1 notification number BRAIN276". When the same new user tried to login second or third time, it's not showing the error and nothing is happening when we enter userid and pass word. But, we can logon to GUI RWT.
We tried to pull a query view report and web template reports see if we can display data. The BI team gave me couple of info objects keys.
1) I created the report with object key and type as one for 3.x template and one for 3.x query view
2) Created logical links for these two reports and selected these two reports in business role. Now the reports are showing in webui
3) When I select any of these, it taking to a blank screen without any logon screen.
BW team says that these reports are running with data in their system.
Can someone please help?

Values for htmldb_item.text field do not display in CSV output

HTML DB experts,
I have a report query with the following 2 items in the SELECT statement:
wwv_flow_item.display_and_save(2, DOC_CD, 10) DOC_CD,
htmldb_item.text(3, DOC_DESC, 50, 255) DOC_DESC
I have enabled the CSV output for this report. The problem is, when I generate a csv file, only the DOC_CD (wwv_flow_item.display_and_save) displays. The values for the DOC_DESC (htmldb_item.text) do not display. What do I need to do to get the DOC_DESC to display?
Thanks for your help.
Message was edited by:
[email protected]

Items rendered using htmldb_item generate HTML tags on the form, not plain text. You are right, the CSV export excludes them.
Your best best is to create another report region on some other page with the same query except replace all the htmldb_item() calls with regular columns i.e. make it a read-only report and use the "export: CSV" template and put up a link to this page at the bottom of your editable report (instead of the builtin CSV link). This way when you click on this link, it will generate your report and immediately offer to export it to CSV
Hope this helps.

TypeKit Fonts Not Displaying When Published to Web

Hello everyone. After noodling around the forums, I found the method for using non-Edge fonts from TypeKit in a Muse site. For some reason, however, it doesn't seem to work. My workflow if below. Is there something I'm missing? Is there a specific font I should be using in Muse in the hopes it gets overwritten by TypeKit?
1. Setup and publish TypeKit.
     a. Added Adobe Garamond Pro as font.
     b. Created selector of .body_garapro for that font.
     c. Publish changes.
2. In Muse:
     a. Copy embed code from TypeKit into Head via page properties for Master Page.
     b. Create paragraph style called body_garapro. (In this paragraph style, I tried using good old web safe font Arial and the edge web font Garamond EB. In either case neither was replaced. I made sure not to use a system font to avoid the image output issue.)
     c. Export site as HTML, upload via FTP to domain entered into TypeKit...and no TypeKit replacement.
I also made sure that my test text had no overrides and was using the straight body_garapro paragraph style.
Any help would be greatly appreciated!
Chris

In the web template properties there was a setting named "Force Variable Screen Display" make sure it is checked.
And also see if this helps:
Re: Force Variable screen with Web Templates?
Gili

Font not displaying on Reports Output (RHEL 5) for 10g

Similar Messages

Maybe you are looking for