Font not found when launching OEM

Before the OEM window appears, messages apear saying:
Font specified in font.properties not found [--system-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]
There are 21 lines of the same text as indicated above.
Any suggestions?

Font specified in font.properties not found [--system-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]
I don't think the font cause functional problem. It just doesn't look good. Right this is just warning, you could save ignore that.

Similar Messages

Fonts not found when using Xvfb

Hi all,
I keep encountering "fonts specified in fonts.properties not found" whenever I execute rwserver.sh server=XXX.
fyi, I'm running Solaris8 on Sun SPACE machine. I use Xvfb downloaded from Oracle to allow report server to run after I logoff from the session. I realised that the report sever I created manually will die prematurely if I log out from the session when I use the "default" Xserver provided by Solaris.
And prior to running rwserver.sh I set the DISPLAY such DISPLAY=:1.0; export DISPLAY.
pls advise.

I get the same errors on my Solaris system with xvfb, but it doesn't keep anything from working. My reports server comes up and works fine.

Logon group not found when launching planning workbench

When I start planning workbench in RSPLAN, the following error appears:
Connect to message server host failed Connect_PM TYPE=B MSHOST=bwdev.shdl.com GROUP=PUBLIC R3NAME=BWD MSSERV=sapmsBWD PCS=1 ERROR Group PUBLIC not found TIME Mon Sep 25 13:13:13 2006 RELEASE 700 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 4288 DETAIL LgIGroupX COUNTER 1
We filled group "PUBLIC" for template installer and it went through with all green lights including BI IP required 4 JCO desitinations.
but after having a look at the following threads Re: BIP in 2004s, I notice the following sentence: "3. Logon Group - Make sure logon group is specified in ABAP system (SMLG)", when I go to SMLG, only one record with empty logon group exists, but the status is green.
Shall I maintain anything in SMLG? create "public" group in SMLG?
need suggestion...
Patrick

Hi Gregor
I have already followed points with 919850, and our basis already setup SLD (for bw system in SLD, he setup two logon group: SPACE(default) and PUBLIC).
After I maintain logon group "PUBLIC" in SMLG, and then re-execute the step 14 (maintain 4 BI IP JCO destinations), 4 JCO destination appears with green lights again afterwards.
However, now the internl error 500 appears in the web.
any more suggestion?
Patrick

Font not found when opening file and not able to resolve, but is listed in the fonts drop down list?

Hi, i just downloaded some files from a friend and he sent me a link to download the fonts. I did so and 98% of the fonts work, but there are two fonts i am struggling with.
When i open the file i get the font missing warning and it asks me to resolve the fonts. I cannot find the appropriate font in the drop down list so i click 'don't resolve' and start to edit the file. i then come across some text that has missing fonts and i am able to highlight the text and change the text to the appropriate font using the type tool and the font I am looking for is in the drop down list.
The fonts that aren't working are:
Franchise Bold and BebasNeue
The problem is there are multiple separate incidents where these fonts occur, and going through changing each one manually would take a lot of time.
Is there something i can do to fix them all at once?
Thanks,
Harry

I do not see either font in the list you show. I see Bebas Neue xxx but no Bebas Neue without any extra style. Try Bebas Neue at Download Bebas Neue Font - Thousands of fonts to download for free

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Adobe Illustrator CS5 - Fonts not found

We are changing our user from a Mac to a Windows (7) based computer and we are running in to issues with files that she created on the Mac version of Adobe Illustrator. She used some fonts (AGaramond-BoldItalic for example) and it works great on the Mac. I copied all the font files to the windows computer and made sure they work (opened Illustrator and created a document with the fonts).
The issue now is that when we open the old documents from the Mac on the Windows computer it gives an error "Font not found on the system; missing font has been substituted."
I am not sure how to tell the file that the fonts Are there because when it opens all the fonts are to a default Arial.
So far I have tried:
Removing all Adobefnt*.lst files
Resetting adobe settings by holding ctrl+alt+shift and opening the program
Testing the file on a brand new user account
uninstall and reinstall the program
None of these have worked.

There are more cache files than the adobefnt files. See here for more detailed instructions on cleaning your font caches. That said, it sounds likely that the issue is that your fonts are mac only, as Larry said above. You should be able to use Type -> Find Font... to replace them with whatever version you have on the PC but watch for formatting/flow changes. Also, my condolences to your designer. ;-)

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 Vista Ult64

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 on Vista Ultimate 64bit.
Truetype and Opentype work fine. I have searched through all the forums here multiple times, but not found a solution. The only workaround I found was to manually put the font files in c:/ProgramFiles(x86)/CommonFiles/Adobe/Fonts.
When I put any font files in that folder, they show up in CS3 for use, but not in windows apps. I thought I would make a permanent work around by placing all of my uninstalled font files in that folder, then use suitcase to install them from there. That didn't work because EVERY font in that folder is available to CS3 and turned on. Do they get installed when you put them in there?? It didn't seem like they were installed, and windows apps didn't see them.
These are workarounds anyway. My main goal is to have suitcase work so I can organize my fonts efficiently. Extensis blames the font and CS3. I have read that there are adobe issues with other font management software as well as suitcase. Any help would be appreciated.

Got mine FIXED here is what i did:
Windows 7 64bit SP1, CS 5
Postscript fonts (comprising of *.pfb + *.pfm files) did not show up in any CS5 app, but showed OK in Word, Excel, Notepad etc.
Tried activating through Suitcase Fusion 2 and also through FontExpert 2009 - but neither of them made the fonts visible in CS5 apps
1) open Start Menu/Control Panel/Fonts
2) on the sidebar there is "Font settings" item
3) set the settings as i did
[ ] Hide fonts based on language settings
[ x ] Allow fonts to be installed using a shortcut (advanced)
FIXED mine,
now i can use Suitcase Fusion 2 to install any PFB/PFM fonts without any problems...
PLEASE IF THIS WORKED FOR YOU TOO, LEAVE A MESSAGE HERE SO OTHERS KNOW IF THIS FIX IS 100% WORKING

Activated fonts not found in the font list.

A constant problem - active fonts not found in the font list.
And often when I can find trouble fonts, they're not correctly alphabetically ordered. I understand this may be the fault of the font author - not saving the correct screen name for the font so it matches it's actual name.
Here's a strange case - Homestead. An approach to typography I've never seen before - you're meant to layer up multiple instances of the same text object and alter it's subset of the Homestead family. But activate the whole family and you'll never find more than one of it's family members at a time. Activate just one and you'll find it (not in alphabetical order, though). Deactivate that one and activate another - now you'll find it. This makes it's very cumbersome to use the font as intended. What is Aunt Illy doing here and why?
will I ever get along with fonts . . .

You have a font conflict on your machine. Clear your font cache, you must have another font conflicting. The whole family loads for me, and shows in Illustrator.
There are many products to clear your cache the one below is free for mac
http://homepage.mac.com/mdouma46/fontfinagler/
You can also find and delete all your .lst files, or use font doctor or Font Explorer X Pro

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Keep getting Disc Burner or software not found when trying to burn a CD

I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

Hi daurel,
Thanks for participating in the Apple Support Communities.
It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps.
If the situation continues, be sure to try the tips in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
Sincerely,
Jeremy

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

I get "disc burner or software not found" when I try to burn a playlist.

I am now getting "disc burner or software not found" when I try to burn a playlist from iTunes version 10.6.1.7 on Windows 7 PC. I've not added any new burner software or made any software changes of any kind. I have NERO 8 and I checked the "burn rights" is set for "everyone".
Is the any solution?
NASA_1967

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

"Font not found on the system" for work logo font

I just started a new job and every single AI file I work with in illustrator is using VTypewriterRoyal - the company logo.
It automatically defaults to Myriad with the msg:
"Font not found on the system; missing font has been substituted."
I've spent way too much time changing it back from Myriad once in AI + scouring the web for answers. Haven't come up with any.
No one else at work seems to have this problem. I've tried installing and uninstalling the font.
Redownloading as OTF instead of TTF.
Nothing is working, so I really really hope someone can help me since I'm going to be considered slow if I keep having to take the time to change every ******* file I open.
Adobe support is seemingly overly complicated and this issue is making me crazy!!!
Someone please help. I'm on a brand new iMac 27" using 10.6.8....
Thanks.

check your spelling/spacing
I see
VTypewriter Royal
and
VTypewriterRoyal
They are different names...one has a space, the other does not
They must match exactly to work correctly

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

Font not found when launching OEM

Similar Messages

Maybe you are looking for