Font override in Report Header
I have a quirky issue. I am trying to add a set of headers on top of the typical report column headers in a report. I inherited this from another long gone developer..
What they did was build a div wrapped around a table to get the formatting they wanted, but the table cells have a span trying to override the body's css tags..
I have looked at it for a few hours today and spent enough time trying...
Hopefully there is a css guru who can offer some input!
Running under Oracle 11g, APEX 4.x
I have posted an example of the code on oracle's hosted site:
Workspace: homeworld
User Name: demo
Password: demo
Application id: 28970
Page: 2
Thank you,
Tony Miller
Dallas, TX
TexasApexDeveloper wrote:
Yes, they are column groups. To be honest, I have rarely done custom report templates.. Could I ask if you know of any documentation on the subject?The Oracle documentation is dire on the topic. I don't have any of the books to hand but I'm sure Arie or John Scott will have included useful examples. A search on the forum should turn up some by Carl and myself.
What I am looking to do is :
Valuations Losses
Low MidPoint High Loss in Loss in Loss in
Pool Value Value Value Low Value Midpoint High Value
I've created a couple of examples of custom named column templates on that page.
Similar Messages
-
I am trying to adjust the font/color of my Headings and Data on Interactive Reports. I am on apex_4.2.
I went into my page template (shared componenets - templates) and in the Definition section after the #HEAD# I added my CSS override info (see below). it doesn't seem to be reading this on my IR Reports. Am I missing something?
<!DOCTYPE html>
<!--[if lt IE 7 ]> <html class="ie6 no-css3" lang="&BROWSER_LANGUAGE."> <![endif]-->
<!--[if IE 7 ]> <html class="ie7 no-css3" lang="&BROWSER_LANGUAGE."> <![endif]-->
<!--[if IE 8 ]> <html class="ie8 no-css3" lang="&BROWSER_LANGUAGE."> <![endif]-->
<!--[if IE 9 ]> <html class="ie9" lang="&BROWSER_LANGUAGE."> <![endif]-->
<!--[if (gt IE 9)|!(IE)]><!--> <html lang="&BROWSER_LANGUAGE."> <!--<![endif]-->
<head>
<meta charset="UTF-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
<title>#TITLE#</title>
<link rel="icon" href="#IMAGE_PREFIX#favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="#IMAGE_PREFIX#favicon.ico" type="image/x-icon">
#APEX_CSS#
#TEMPLATE_CSS#
#THEME_CSS#
#PAGE_CSS#
#APEX_JAVASCRIPT#
#TEMPLATE_JAVASCRIPT#
#APPLICATION_JAVASCRIPT#
#PAGE_JAVASCRIPT#
#HEAD#
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<link rel="stylesheet" href="#IMAGE_PREFIX#themes/theme_24/css/4_1.css">
<script src="#IMAGE_PREFIX#themes/theme_24/js/4_1.js"></script>
<STYLE TYPE="text/css">
********** Interactive Reports Override ************
.apexir_WORKSHEET_DATA {
border:1px solid #b8b8b8;
border-collapse:separate;
empty-cells:show;
font-size:8pt;
table.apexir_WORKSHEET_DATA th {
background:#4e4e4e;
font-weight:bold;
color:#fff;
border-top:1px #ccc solid;
border-bottom:1px #aaa solid;
font-size:21px !important;
white-space:nowrap;
vertical-align:center;
letter-spacing:1;
height:25px;
background-image:url(report/report-header-red.gif);
background-repeat:repeat-x;
padding-right: 5px;
table.apexir_WORKSHEET_DATA td {
background: #e2e2e2;
font:normal 8pt Tahoma;
padding:2px 5px;
empty-cells:show!important;
border-bottom:1px solid #b8b8b8;
border-top:1px solid #fff;
</style>
</head>
<body #ONLOAD#>
<!--[if lte IE 6]><div id="outdated-browser">#OUTDATED_BROWSER#</div><![endif]-->
#FORM_OPEN#
<div id="uBodyContainer">I requested a space on otn, but haven't received credentials yet.
I just created a simple Interactive Report on a page and want to change the IR report table headers and table data fonts/font sizes. Do you have an example on your workspace I could look at? -
Changing font in Oracle Report in PDF output
Hi,
I have created reports using dev10g(report builder). I can run report from client side in pdf format but I want to change the font (i.e from courier to Arial narrow).
How can I do this?
Is there anyone who can help me?
my unifont.ali file is:
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2004, Oracle. All rights reserved.
# $
# $Revision: tk2/admin/uifont.ali#0 $
# Copyright (c) 1994, 2004, Oracle. All rights reserved.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
"arial narrow" = "Arial Narrow"
Arial = helvetica
"Courier New" = courier
"Times New Roman" = times
Modern = helvetica
"MS Sans Serif" = helvetica
"MS Serif" = times
"Small Fonts" = helvetica
# Mapping from Macintosh
"New Century Schlbk" = "new century schoolbook"
"New York" = times
geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
"helvetica narrow" = "Arial Narrow"
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
"arial narrow" = "Arialn.ttf"
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
# Subsetting TrueType Collection fonts:
# Typically, a TTC font contains several fonts in one file. For example,
# the TTC file, msgothic.ttc consists of three fonts in the order -
# MS Gothic, MS PGothic and MS UI Gothic. To subset MS PGothic, the
# entry in the PDF:Subset section of uifont.ali would be:
# "MS PGothic" = "msgothic.ttc,1"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Subsetting entry. Entries
# in Font Subsetting will take precedence over the entries in Font Embedding
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
Thanks,
RafikulWelcome to OTN
Check the two link..
1. Re: Oracle Reports 10g Fonts issue
2. Re: Adding new font to my Reports Setup
Hope this will help you
Hamid
If someone's response is helpful or correct, please mark it accordingly. -
Decreasing font size of the heading
hi
In my alv report im printing the heading ( Vendor Address Details)...
how to decrease the font size of the heading...
searched in sdn bt dint get the proper output....
Regards
SmithaFor first header
wa_hader-type = 'H'.
wa_hader-info = 'Main Headding'.
append wa_heaer to it_header.
For Sub header
wa_hader-type = 'S'.
wa_hader-info = Sub Headding1.
append wa_heaer to it_header.
you can use any of the above options to decrease your heading size... -
??????? appears in report heading
Dear All,
We are using ECC 5.0. When we generate any report (even in standard reports) in the header instead of menu options we get question marks (e.g ??????????? ???????????? ??????????).
What could be the reason?
Thanks n Regards
Anandasivawas able to do this. I still have another problem. I do not want blank lines appearing between pages when I port the report to excel. Any idea how to do this. I am using Report Builder 6.0.8.8.3
Thanks Aruna
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by aruna100:
Is there a way not to have page headings, and instead have the page heading as the report heading so that it appears only once in the report.
The problem I am having is, I want to be able to convert a report into a excel spread sheet, so I do not want periodic appearance of the page headings.I just want the headings once and then the data.
Thanks .
Aruna<HR></BLOCKQUOTE>
null -
Modify Report Header using an expression
Hi All,
I would like to know if we can modify the Report Header programmatically? I basically would like to append a couple of lines in the header.
I can think of two ways -
1. ModifyReportHeader callback - this is really not an option for me as we need to do the implementation in a custom step.
2. Override the default reportgen_txt.seq and reportgen_html.seq and edit them as necessary - this one seems a bit ugly to me.
Any other ideas?
thanks and regards,
aCe
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.
Solved!
Go to Solution.Ray,
Sorry, I if I was not clear earlier.
This custom step would be used by a test sequence developer who has very little understanding of TestStand.
The idea is that the person would drag and drop this step in to a sequence and add details of the Unit under test during edit-time which then should appear in the report header along with serial numbers etc. when the program is run.
For example, data such as:
Test Specification: X123-456-789 Issue x
Unit Part#: xxxxxxx
Interface Part# xxxxxxxxxxxx
Asking someone to add the callback would then require TestStand skills and would defeat our goal of trying to deskill this operation.
I hope I am making sense!
Thanks and regards,
aCe
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community. -
In order to dynamically display data in the Report Header based in the current record of the Dataset, we started using Shared Variables, we initially used ReportItems!SomeTextbox.Value, but we noticed that when SomeTextbox was not rendered in the body
(usually because a comment section grow to occupy most of the page if not more than one page), then the ReportItem printed a blank/null value.
So, a method was defined in the Code section of the report that would set the value to the shared variable:
public shared Params as String
public shared Function SetValues(Param as String ) as String
Params = Param
Return Params
End Function
Which would be called in the detail section of the tablix, then in the header a textbox would hold the following expression:
=Code.Params
This worked beautifully since, it now didn't mattered that the body section didn't had the SetValues call, the variable persited and the Header displayed the correct value. Our problem now is that when the report is being called in different threads with
different data, the variable being shared/static gets modified by all the reports being run at the same time.
So far I've tried several things:
- The variables need to be shared, otherwise the value set in the Body can't be seen by the header.
- Using Hashtables behaves exactly like the ReportItem option.
- Using a C# DLL with non static variables to take care of this, didn't work because apparently when the DLL is being called by the Body generates a different instance of the DLL than when it's called from the header.
So is there a way to deal with this issue in a multi thread safe way?
Thanks in advance!
Hi Angel,
Per my understanding that you want to dynamic display the group data in the report header, you have set page break based on the group, so when click to the next page, the report hearder will change according to the value in the group, when you are using
the shared variables you got the multiple thread safe problem, right?
I have tested on my local environment and can reproduce the issue, according to the multiple safe problem the better way is to use the harshtable behaves in the custom code, you have mentioned that you have tryied touse the harshtable but finally got
the same result as using the ReportItem!TextBox.Value, the problem can be cuased by the logic of the code that not works fine.
Please reference to the custom code below which works fine and can get all the expect value display on every page:
Shared ht As System.Collections.Hashtable = New System.Collections.Hashtable
Public Function SetGroupHeader( ByVal group As Object _
,ByRef groupName As String _
,ByRef userID As String) As String
Dim key As String = groupName & userID
If Not group Is Nothing Then
Dim g As String = CType(group, String)
If Not (ht.ContainsKey(key)) Then
' must be the first pass so set the current group to group
ht.Add(key, g)
Else
If Not (ht(key).Equals(g)) Then
ht(key) = g
End If
End If
End If
Return ht(key)
End Function
Using this exprssion in the textbox of the reportheader:
=Code.SetGroupHeader(ReportItems!Language.Value,"GroupName", User!UserID)
Links belowe about the hashtable and the mutiple threads safe problem for your reference:
http://stackoverflow.com/questions/2067537/ssrs-code-shared-variables-and-simultaneous-report-execution
http://sqlserverbiblog.wordpress.com/2011/10/10/using-custom-code-functions-in-reporting-services-reports/
If you still have any problem, please feel free to ask.
Regards
Vicky Liu -
Report header is missng while printing or spooling
Hi All,
I have a problem in print a report.its
After getting selection screen of the report ,If i click a print button (it's for execute and print)
the header details are missing in spool ( does not print selection fields of the report are missing in spool).
If i execute the report and got the output ,then i click the print button it's execute properly means in spool i am getting all the output properly ,header details also printed. means selection screen fields means what i entered in selection screen is printing.Its a AVL report.While debugging i am not getting solution.i have investigated in menu painter also.
but i am not getting proper idea to fix the bug.
i am sending the code also.please let me know ASAP
code:
REPORT ZMXXR048 LINE-SIZE 1023 "255 deleted AW2150 GLDK9AAYU9
LINE-COUNT 65
MESSAGE-ID zm
NO STANDARD PAGE HEADING.
*eject
TABLES declaration.
TABLES:ekko, "Purchasing Document: Header
ekpo, "Purchasing Document: Item
a016, "Contract Item AMT25JAN05
a019, "Contract Header AMT25JAN05
t024, "Purchasing Groups
t024e, "Purchasing Organizations
t161, "Purchasing Document Types
t001w, "Plants/branches
lfa1, "Vendor Master (General Section) AMT25JAN05
eket, "Scheduling Agreement Schedule Lines
ekbe, "Purchasing Document: History AMT25JAN05
ekab, "Release Documentation AMT25JAN05
zbsart_doc."Purchasing documents custom structure "GA01
ekkn. "Account Assignment in Purchasing Document "GA19062003
Comment AMT25JAN05
*eject
TYPE-POOLS definition.
TYPE-POOLS slis. "KAK01
*eject
CONSTANTS declaration.
CONSTANTS:
c_t(1) TYPE c VALUE 'T', "AMT25JAN05
c_l(1) TYPE c VALUE 'L',
c_m(1) TYPE c VALUE '4', "AMT25JAN05
c_y(1) TYPE c VALUE 'Y', "AMT25JAN05
c_i(1) TYPE c VALUE 'I',
c_ne(2) TYPE c VALUE 'NE',
c_eq(2) TYPE c VALUE 'EQ', "AMT25JAN05
c_lp(2) TYPE c VALUE 'LP',
c_nb(2) TYPE c VALUE 'NB',
c_ec(2) TYPE c VALUE 'EC',
c_lpa(3) TYPE c VALUE 'LPA',
c_zlp(3) TYPE c VALUE 'ZLP',
c_znba(4) TYPE c VALUE 'ZNBA',
c_mk(2) TYPE c VALUE 'MK', "AMT25JAN05
c_wk(2) TYPE c VALUE 'WK', "AMT25JAN05
c_doqot(1) TYPE c VALUE '"', "AMT25JAN05
c_totals(6) TYPE c VALUE 'TOTALS',
c_x(1) TYPE c VALUE 'X',
c_k(1) TYPE c VALUE 'K', "AMT25JAN05
c_a(1) TYPE c VALUE 'A',
C_S(1) TYPE C VALUE 'S',"insert AW2150 GLDK9AAYU9
c_55(2) TYPE c VALUE '55',
c_56(2) TYPE c VALUE '56',
c_44(2) TYPE c VALUE '44', "AMT25JAN05
c_45(2) TYPE c VALUE '45',
c_1(1) TYPE c VALUE '1',
c_2(1) TYPE c VALUE '2',
c_h(1) TYPE c VALUE 'H',
c_(1) TYPE c VALUE '', "GA18062003.
c_n(1) TYPE c VALUE 'N', "SRI24062003
c_o(1) TYPE c VALUE 'O', "SRI24062003
c_maxdays TYPE p VALUE '93', "GA29072003
c_wk1(10) type c VALUE 'WK1'. "NAR10NOV06
*Begin of Addition by AMT25JAN05
CONSTANTS :
c_3 TYPE i VALUE 3 ,
c_4 TYPE i VALUE 4 ,
c_5 TYPE i VALUE 5 ,
c_8 TYPE i VALUE 8 ,
c_10 TYPE i VALUE 10 ,
c_11 TYPE i VALUE 11 ,
c_12 TYPE i VALUE 12 ,
c_15 TYPE i VALUE 15 ,
c_18 TYPE i VALUE 18 ,
c_20 TYPE i VALUE 20 ,
c_23 TYPE i VALUE 23 , "TUL02022005 "KVI04Feb05
c_40 TYPE i VALUE 40 ,
c_all(4) TYPE c VALUE '&ALL' ,
c_sa(3) TYPE c VALUE '&SA' ,
c_bs(3) TYPE c VALUE '&BS' ,
c_sum(4) TYPE c VALUE '&SUM' ,
c_eb3(4) TYPE c VALUE '&EB3' ,
c_xpa(4) TYPE c VALUE '&XPA' ,
c_omp(4) TYPE c VALUE '&OMP' ,
c_crb(4) TYPE c VALUE '&CRB' ,
c_cre(4) TYPE c VALUE '&CRE' ,
c_ave(4) TYPE c VALUE '&AVE' ,
c_pc10(4) TYPE c VALUE 'PC10' ,
c_coltab(6) TYPE c VALUE 'COLTAB' ,
c_excel(5) TYPE c VALUE 'EXCEL' ,
c_ic1(4) TYPE c VALUE '&IC1' ,
c_dload(5) TYPE c VALUE 'DLOAD' ,
c_refrs(5) TYPE c VALUE 'REFRS' ,
c_waers(5) TYPE c VALUE 'WAERS' ,
c_bprme(5) TYPE c VALUE 'BPRME' ,
c_ekbe(4) TYPE c VALUE 'EKBE' ,
c_meins2(6) TYPE c VALUE 'MEINS2' ,
c_meins3(6) TYPE c VALUE 'MEINS3' ,
c_ekkn(4) TYPE c VALUE 'EKKN' ,
c_ekpo(4) TYPE c VALUE 'EKPO' ,
c_ekko(4) TYPE c VALUE 'EKKO' ,
c_lfa1(4) TYPE c VALUE 'LFA1' ,
c_meins(5) TYPE c VALUE 'MEINS' ,
c_eket(4) TYPE c VALUE 'EKET' ,
c_me33l(5) TYPE c VALUE 'ME33L' ,
c_me23(4) TYPE c VALUE 'ME23' ,
c_bes(3) TYPE c VALUE 'BES' ,
c_bedat(11) TYPE c VALUE 'S_BEDAT-LOW',
c_pur(15) TYPE c VALUE 'PURCHASING DOC.',
c_item(4) TYPE c VALUE 'ITEM' ,
c_doc(8) TYPE c VALUE 'DOC.DATE' ,
c_vendor(6) TYPE c VALUE 'VENDOR' ,
c_vname(11) TYPE c VALUE 'VENDOR NAME' ,
c_plant(5) TYPE c VALUE 'PLANT' ,
c_pdesc(17) TYPE c VALUE 'PLANT DESCRIPTION',
c_sloc(4) TYPE c VALUE 'SLOC' ,
c_pgr(3) TYPE c VALUE 'PGR' ,
c_porg(4) TYPE c VALUE 'PORG' ,
c_mat(8) TYPE c VALUE 'MATERIAL' ,
c_standard(8) TYPE c VALUE 'STANDARD' ,
c_matdesc(20) TYPE c VALUE 'MATERIAL DESCRIPTION',
c_deldate(13) TYPE c VALUE 'DELIVERY DATE' ,
c_qty(13) TYPE c VALUE 'SCHEDULED QTY' ,
c_quom(4) TYPE c VALUE 'OUOM' ,
c_net(9) TYPE c VALUE 'NET PRICE' ,
c_curr(4) TYPE c VALUE 'CURR' ,
c_per(3) TYPE c VALUE 'PER' ,
c_opuom(5) TYPE c VALUE 'OPUOM' ,
c_grqty(6) TYPE c VALUE 'GR QTY' ,
c_gruom(6) TYPE c VALUE 'GR UOM' ,
c_irqty(6) TYPE c VALUE 'IR QTY' ,
c_iruom(6) TYPE c VALUE 'IR UOM' ,
c_trnum(15) TYPE c VALUE 'TRACKING NUMBER' ,
c_rec(12) TYPE c VALUE 'RECEIVER-BBP' ,
c_tcont(18) TYPE c VALUE 'T_CONDITIONS-EBELN' .
*End of Addition by AMT25JAN05
*BEGIN INSERT BB1097 - add a constant for the vendor mat field
CONSTANTS C_VENDMAT(15) TYPE C VALUE 'VENDOR MATERIAL'.
*END INSERT BB1097
*eject
DATA Work fields definition.
DATA : w_repid LIKE sy-repid,
w_color TYPE i,
w_info LIKE sy-lisel, "AMT25JAN05
w_lifnr LIKE eina-lifnr, "AMT25JAN05
w_matnr LIKE eina-matnr, "AMT25JAN05
w_werks LIKE marc-werks, "AMT25JAN05
w_tabkey LIKE cdpos-tabkey, "AMT25JAN05
w_objectid LIKE konp-knumh, "AMT25JAN05
w_len TYPE i , "AMT25JAN05
w_field LIKE konp-kopos, "AMT25JAN05
w_eindt LIKE eket-eindt, "AMT25JAN05
w_ebeln LIKE ekko-ebeln, "ujo1jul
zsort(6) TYPE c, "KAK01
w_fldname(20) TYPE c, "GA16062003.
w_titel LIKE spop-titel, "GA25062003.
w_text1 LIKE spop-textline1, "GA25062003.
w_text2 LIKE spop-textline2, "GA25062003.
W_FLAG(1) TYPE C, "KVI04Feb05
Start of GLDK9A8WWS (AS3848)
Defined variable for line size.
w_linsz LIKE sy-linsz.
End of GLDK9A8WWS (AS3848)
DATA: date_diff LIKE ekko-aedat.
*BEGIN OF SRI26062003
*DATA: w_s1 LIKE ekbe-menge, AMT25JAN05
w_s2 LIKE ekbe-bamng, AMT25JAN05
w_s3 LIKE ekbe-bpmng, AMT25JAN05
w_s4 LIKE ekpo-netpr. AMT25JAN05
w_s5 LIKE ekkn-wempf. AMT25JAN05
w_s6 LIKE ekpo-webaz, AMT25JAN05
*END OF SRI26062003
*eject
DATA Structure definition.
DATA: e_coltab TYPE slis_specialcol_alv.
*eject
DATA Internal table definition with INCLUDE STRUCTURE
*Begin of comment by AMT25JAN05
*DATA: BEGIN OF ibdcdata OCCURS 0.
INCLUDE STRUCTURE bdcdata.
*DATA: END OF ibdcdata.
*End of comment by AMT25JAN05
*eject
DATA Other internal table definition.
DATA: BEGIN OF t_documents OCCURS 0, "Main initial internal table
ekgrp LIKE ekko-ekgrp,
ekorg LIKE ekko-ekorg,
eknam LIKE t024-eknam,
ebeln LIKE ekko-ebeln,
ebelp LIKE ekpo-ebelp,
lgort LIKE ekpo-lgort,
kschl LIKE a016-kschl,
datbi LIKE a016-datbi,
datab LIKE a016-datab,
LOEKZ LIKE EKPO-LOEKZ, "insert AW2150 GLDK9AAYU9
infnr LIKE ekpo-infnr,
pstyp LIKE ekpo-pstyp,
konnr LIKE ekpo-konnr,
ematn LIKE ekpo-ematn,
txz01 LIKE ekpo-txz01,
werks LIKE ekpo-werks,
aedat LIKE ekpo-aedat,
epstp LIKE rm06e-epstp,
lifnr LIKE ekko-lifnr,
waers LIKE ekko-waers, "SRI26062003
name1 LIKE lfa1-name1,
name2 LIKE t001w-name1,
ktmng LIKE ekpo-ktmng,
meins LIKE ekpo-meins,
meins2 LIKE ekpo-meins, "GA23062003
meins3 LIKE ekpo-meins, "GA23062003
bednr LIKE ekpo-bednr,
loevm_ko LIKE konp-loevm_ko,
bsart LIKE ekko-bsart,
eindt LIKE eket-eindt, "SBH01
netpr LIKE ekpo-netpr, "SBh01
peinh LIKE ekpo-peinh, "GA01
bprme LIKE ekpo-bprme, "GA01
menge LIKE ekpo-menge,
menge2 like ekbe-menge, "GA23062003.
bamng LIKE ekbe-bamng, "GA23062003.
bpmng LIKE ekbe-bpmng,
vgabe LIKE ekbe-vgabe, "GA01
webaz LIKE ekpo-webaz,
wempf LIKE ekkn-wempf, "GA19062003.
flgdel(1) TYPE c, "ujo9jul
Start of GLDK9A8WWS (AS3848)
Added fields WEPOS (GR indicator), REPOS (IR indicator) and WEBRE (GR-
based IV indicator).
wepos LIKE ekpo-wepos, "GR indicator
repos LIKE ekpo-repos, "IR indicator
webre LIKE ekpo-webre, "GR-based IV indicator
End of GLDK9A8WWS (AS3848)
ELIKZ LIKE ekpo-ELIKZ, "Delivery "TUL02022005
EREKZ LIKE EKPO-EREKZ, "Invoice AW2150 GLDK9AAYU9
*BEGIN INSERT BB1097 - add column for the vendor mat field. this field
will hold the value of the vendor material #
IDNLF LIKE EKPO-IDNLF,
*END INSERT BB1097
END OF t_documents.
Added begin ujo9jul
*DATA: t_documents_tmp LIKE t_documents OCCURS 0 WITH HEADER LINE.
*Comment by AMT25JAN05
*eject
DATA Other internal table definition.
*Begin of Comment by AMT25JAN05
*DATA: BEGIN OF t_ekko OCCURS 0,
ebeln LIKE ekko-ebeln,
bsart LIKE ekko-bsart,
loekz LIKE ekko-loekz,
aedat LIKE ekko-aedat,
lifnr LIKE ekko-lifnr,
ekorg LIKE ekko-ekorg,
ekgrp LIKE ekko-ekgrp,
waers LIKE ekko-waers,
name1 LIKE lfa1-name1,
END OF t_ekko.
*End of Comment by AMT25JAN05
Added end ujo9jul
*Begin of SRI26062003
DATA:BEGIN OF t_t024 OCCURS 0 ,
ekgrp LIKE t024-ekgrp,
eknam LIKE t024-eknam,
END OF t_t024.
DATA:BEGIN OF t_t001w OCCURS 0 ,
werks LIKE t001w-werks,
name1 LIKE t001w-name1,
END OF t_t001w.
*End of SRI26062003
DATA: BEGIN OF t_conditions OCCURS 0, "Main final internal table
ebeln LIKE ekpo-ebeln,
ekgrp LIKE ekko-ekgrp,
ekorg LIKE ekko-ekorg,
waers LIKE ekko-waers, "SRI26062003
eknam LIKE t024-eknam,
ebelp LIKE ekpo-ebelp,
lgort LIKE ekpo-lgort,
kschl LIKE a016-kschl,
datbi LIKE a016-datbi,
datab LIKE a016-datab,
infnr LIKE ekpo-infnr,
pstyp LIKE ekpo-pstyp,
konnr LIKE ekpo-konnr,
ematn LIKE ekpo-ematn,
txz01 LIKE ekpo-txz01,
werks LIKE ekpo-werks,
aedat LIKE ekpo-aedat,
epstp LIKE rm06e-epstp,
lifnr LIKE ekko-lifnr,
name1 LIKE lfa1-name1,
name2 LIKE t001w-name1,
ktmng LIKE ekpo-ktmng,
meins LIKE ekpo-meins,
meins2 LIKE ekpo-meins, "GA23062003.
meins3 LIKE ekpo-meins, "GA23062003.
bednr LIKE ekpo-bednr,
loevm_ko LIKE konp-loevm_ko,
bsart LIKE ekko-bsart,
eindt LIKE eket-eindt,
netpr LIKE ekpo-netpr,
peinh LIKE ekpo-peinh,
bprme LIKE ekpo-bprme,
menge LIKE ekpo-menge,
menge2 like ekbe-menge, "GA23062003.
bamng LIKE ekbe-bamng, "GA23062003.
bpmng LIKE ekbe-bpmng,
vgabe LIKE ekbe-vgabe, "GA01
webaz LIKE ekpo-webaz,
wempf LIKE ekkn-wempf, "GA19062003.
AGING TYPE I, "insert AW2150 GLDK9AAYU9
ELIKZ LIKE ekpo-ELIKZ, "TUL02022005
EREKZ LIKE EKPO-EREKZ, "insert AW2150 GLDK9AAYU9
coltab TYPE slis_t_specialcol_alv, "SRI24062003
*BEGIN INSERT BB1097 - add column for the vendor mat field. this field
will hold the value of the vendor material #
IDNLF LIKE EKPO-IDNLF,
*END INSERT BB1097
END OF t_conditions.
Internal Table for the Purchasing Group name
*Begin of Comment by AMT25JAN05
*DATA: BEGIN OF t_purchgr OCCURS 0,
name2 LIKE t024-eknam,
END OF t_purchgr.
*End of Comment by AMT25JAN05
internal table for the plant name
*Begin of Comment by AMT25JAN05
*DATA: BEGIN OF t_plant OCCURS 0,
name1 LIKE t001w-name1,
END OF t_plant.
*End of Comment by AMT25JAN05
*Begin of Comment by AW2150
Internal Table for the Vendor Number and Vendor Name
*DATA: BEGIN OF t_lfa1 OCCURS 0,
lifnr LIKE lfa1-lifnr,
name1 LIKE lfa1-name1,
END OF t_lfa1.
*End of Comment by AW2150
*Start of GA19062003
Internal table for the Good Recipient in case of BBP
DATA: BEGIN OF t_ekkn OCCURS 0,
ebeln LIKE ekkn-ebeln, "SRI26062003
ebelp LIKE ekkn-ebelp, "SRI26062003
wempf LIKE ekkn-wempf,
END OF t_ekkn.
*End of GA19062003
Internal Table for EXCEL DOWNLOADING
DATA: BEGIN OF t_conditions_exe OCCURS 0,
ebeln(15) TYPE c,
ebelp(11) TYPE c,
aedat(11) TYPE c,
lifnr(16) TYPE c,
name1(35) TYPE c,
werks(5) TYPE c,
name2(30) TYPE c, "GA16062003.
lgort(4) TYPE c,
ekgrp(3) TYPE c,
ekorg(4) TYPE c,
" eknam(30) type c, "GA16062003.
ematn(20) TYPE c,
txz01(40) TYPE c,
*BEGIN INSERT BB1097 - this field will hold the value of the vendor
material #
IDNLF(35) TYPE C,
*END INSERT BB1097
eindt(13) TYPE c,
menge(13) TYPE c,
meins(4) TYPE c,
netpr(11) TYPE c,
waers(5) TYPE c, "ujo7jul
peinh(4) TYPE c,
bprme(4) TYPE c,
menge2(11) type c,
bamng(11) TYPE c,
meins2(6) TYPE c,
bpmng(11) TYPE c,
meins3(6) TYPE c,
bednr(21) TYPE c,
wempf(12) TYPE c, "GA19062003.
AGING(7) TYPE C, "insert AW2150 GLDK9AAYU9
ELIKZ(23) TYPE c, "TUL02022005
EREKZ(23) TYPE C, "insert AW2150 GLDK9AAYU9
END OF t_conditions_exe.
*eject
*INTERNAL TABLE TO FIND THE RECEIVED AND INVOICED QUANTITY
DATA: BEGIN OF t_ekbe OCCURS 0,
ebelp LIKE ekbe-ebelp,
ebeln LIKE ekbe-ebeln,
vgabe LIKE ekbe-vgabe,
BELNR LIKE EKBE-BELNR,
*Begin Of Change BH9511 20-Aug-07
menge LIKE ekbe-menge,
menge(16) TYPE P DECIMALS 3,
*End Of Change BH9511 20-Aug-07
shkzg LIKE ekbe-shkzg,
END OF t_ekbe.
*INTERNAL TABLE TO FIND THE RECEIVED AND INVOICED UoM
DATA: BEGIN OF t_ekbe_temp OCCURS 0,
ebelp LIKE ekbe-ebelp,
ebeln LIKE ekbe-ebeln,
vgabe LIKE ekbe-vgabe,
menge LIKE ekbe-menge,
END OF t_ekbe_temp.
Added begin ujo7jul
DATA: BEGIN OF t_totals OCCURS 0,
menge LIKE ekpo-menge,
meins LIKE ekpo-meins,
bamng LIKE ekbe-bamng,
meins2 LIKE ekpo-meins,
bpmng LIKE ekbe-bpmng,
meins3 LIKE ekpo-meins,
END OF t_totals.
DATA: BEGIN OF t_tot_netpr OCCURS 0,
netpr LIKE ekpo-netpr,
waers LIKE ekko-waers,
END OF t_tot_netpr.
DATA: BEGIN OF t_tot_peinh OCCURS 0,
peinh LIKE ekpo-peinh,
bprme LIKE ekpo-bprme,
END OF t_tot_peinh.
*Begin of Comment by AW2150
*DATA: BEGIN OF t_eket OCCURS 0,
ebeln LIKE eket-ebeln,
ebelp LIKE eket-ebelp,
eindt LIKE eket-eindt,
END OF t_eket.
Added end ujo7jul
*End of Comment by AW2150
BEGIN OF KAK01
FOR ALV Related Details.
DATA: alv_fieldcat TYPE slis_t_fieldcat_alv,
alv_layout TYPE slis_layout_alv,
alv_exclude TYPE slis_t_extab,
alv_sort TYPE slis_t_sortinfo_alv,
g_variant LIKE disvariant,
gx_variant LIKE disvariant,
gt_event_exit TYPE slis_t_event_exit, "GA23062003.
g_save(1) TYPE c, "GA23062003.
g_exit(1) TYPE c, "AMT25JAN05
lt_dynpread LIKE dynpread OCCURS 1 WITH HEADER LINE,"AMT25JAN05
g_repid LIKE d020s-prog,
END OF KAK01
Start of GLDK9A8WWS (AS3848)
Added the definition of structure for the events that will be used
in the logic for generating the standard report header for the report.
v_events TYPE slis_t_event.
End of GLDK9A8WWS (AS3848)
*eject
PARAMETERS and SELECT-OPTIONS definition
Start of GLDK9A8WWS (AS3848)
Changed the text-100 in the list of text elements. It was changed
from OPEN PURCHASE DOCUMENTS LIST DISPLAY to Open Purchaser Order
Report.
SELECTION-SCREEN: BEGIN OF BLOCK three WITH FRAME TITLE text-100.
End of GLDK9A8WWS (AS3848)
SELECTION-SCREEN: BEGIN OF BLOCK one WITH FRAME TITLE text-060.
SELECT-OPTIONS : s_ekorg FOR ekko-ekorg OBLIGATORY MEMORY ID eko
NO INTERVALS,
s_lifnr FOR ekko-lifnr,
s_werks FOR ekpo-werks MEMORY ID wrk,
s_ekgrp FOR ekko-ekgrp MEMORY ID ekg
NO INTERVALS,
s_ebeln FOR ekko-ebeln MEMORY ID bes,
s_ebelp FOR ekpo-ebelp MEMORY ID bsp,
s_bsart FOR zbsart_doc-bsart MEMORY ID bsa,"GA01
s_pstyp FOR ekpo-pstyp,
s_loekz FOR ekko-loekz,
s_knttp FOR ekpo-knttp MEMORY ID knt,
s_matnr FOR ekpo-matnr MEMORY ID mat,
s_matkl FOR ekpo-matkl MEMORY ID mkl,
start of modifications AW2150 GLDK9AAYU9
s_bedat FOR ekko-bedat OBLIGATORY, "GA29072003
S_BEDAT FOR EKKO-BEDAT,
end of modifications AW2150 GLDK9AAYU9
S_EINDT FOR EKET-EINDT.
PARAMETERS: p_sum AS CHECKBOX, "SRI26062003
start of modification AW2150 GLDK9ABI53
deleted checkbox for manually closed PO
p_pod AS CHECKBOX DEFAULT 'X'."insert AW2150 GLDK9AAYU9
added checkbox for DCI and FI.
P_DCI AS CHECKBOX DEFAULT 'X', "insert AW2150 GLDK9ABI53
P_FI AS CHECKBOX. "insert AW2150 GLDK9ABI53
end of modification AW2150 GLDK9ABI53
SELECTION-SCREEN: END OF BLOCK one .
SELECTION-SCREEN: BEGIN OF BLOCK two WITH FRAME TITLE text-070.
start of insert AW2150 GLDK9ABSZ8
PARAMETERS: P_ALLPO AS CHECKBOX DEFAULT 'X'.
end of insert AW2150 GLDK9ABSZ8
start of insert AW2150 GLDK9AAYU9
this was just moved from the block below. this is not a new
requirement.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT NO-DISPLAY. " ALV Variant
SELECTION-SCREEN COMMENT 47(40) VARNAME FOR FIELD P_VARI.
end of insert AW2150 GLDK9AAYU9
*Start of GA16062003
PARAMETERS: p_qty RADIOBUTTON GROUP qtvl,
p_date RADIOBUTTON GROUP qtvl,
p_date1 RADIOBUTTON GROUP qtvl.
*End of GA16062003
SELECTION-SCREEN: END OF BLOCK two .
start of modification AW2150 GLDK9AAYU9
Start of GLDK9A8WWS (AS3848)
Commented out the following portion of the source code to remove the
field VARIANT under Settings on the report selection screen.
*SELECTION-SCREEN: BEGIN OF BLOCK four WITH FRAME
TITLE text-073. "TUL0202200
*selection-screen: begin of block four with frame title text-1
*Start of GA23062003
*PARAMETERS: p_vari LIKE disvariant-variant NO-DISPLAY. " ALV Variant
*SELECTION-SCREEN COMMENT 47(40) varname FOR FIELD p_vari.
*Select-Options : S_ELIKZ FOR ekpo-ELIKZ . "TUL0202200
End of modification AW2150 GLDK9AAYU9
Ext. check warning ignored for the comment. AMT25JAN05
*SELECTION-SCREEN: END OF BLOCK four.
End of GLDK9A8WWT (AS3848)
*selection-screen: end of block three.
PARAMETERS p_loggrp(4) TYPE c NO-DISPLAY DEFAULT 'PC10'.
SELECTION-SCREEN: END OF BLOCK three.
*End of GA23062003
*eject
*eject
INITIALIZATION
INITIALIZATION.
*Deletion Indicator
s_loekz-low = c_l.
s_loekz-sign = c_i.
s_loekz-option = c_ne.
APPEND s_loekz.
*start of insert AW2150 GLDK9ABSZ8
IF P_ALLPO EQ C_X.
LOOP AT SCREEN.
IF SCREEN-NAME EQ 'P_QTY'.
SCREEN-ACTIVE = 0.
ELSEIF SCREEN-NAME EQ 'P_DATE'.
SCREEN-ACTIVE = 0.
ELSEIF SCREEN-NAME EQ 'P_DATE1'.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF P_ALLPO NE C_X.
LOOP AT SCREEN.
IF SCREEN-NAME EQ 'P_QTY'.
SCREEN-ACTIVE = 1.
ELSEIF SCREEN-NAME EQ 'P_DATE'.
SCREEN-ACTIVE = 1.
ELSEIF SCREEN-NAME EQ 'P_DATE1'.
SCREEN-ACTIVE = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
*end of insert AW2150 GLDK9ABSZ8
*Start of GA23062003
Settings for display variants
*INITIALIZATION. "GA03122003.
g_repid = sy-repid.
g_save = c_a(1).
CLEAR g_variant.
g_variant-report = g_repid.
g_variant-log_group = p_loggrp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc EQ 0.
p_vari = gx_variant-variant.
ENDIF.
varname = gx_variant-text.
VALIDATE INITIAL DATA ENTERED BY THE USERS ***************
*Start of GA29072003.
IF NOT s_bedat IS INITIAL.
Start of GLDK9A8WWS (AS3848)
Changed sequence in subroutine name to comply with coding standards
based on the review tool ZZCHK.
PERFORM f0100_check_s_bedat.
End of GLDK9A8WWS (AS3848)
ENDIF.
*End of GA29072003.
*eject
*start of insert AW2150 GLDK9ABSZ8
AT SELECTION-SCREEN OUTPUT.
IF P_ALLPO EQ C_X.
LOOP AT SCREEN.
IF SCREEN-NAME EQ 'P_QTY'.
SCREEN-ACTIVE = 0.
ELSEIF SCREEN-NAME EQ 'P_DATE'.
SCREEN-ACTIVE = 0.
ELSEIF SCREEN-NAME EQ 'P_DATE1'.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF P_ALLPO NE C_X.
LOOP AT SCREEN.
IF SCREEN-NAME EQ 'P_QTY'.
SCREEN-ACTIVE = 1.
ELSEIF SCREEN-NAME EQ 'P_DATE'.
SCREEN-ACTIVE = 1.
ELSEIF SCREEN-NAME EQ 'P_DATE1'.
SCREEN-ACTIVE = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
*end of insert AW2150 GLDK9ABSZ8
*eject
*start of insert by AW2150 GLDK9AAYU9
AT SELECTION SCREEN ON S_EINDT.
AT SELECTION-SCREEN ON S_EINDT.
IF NOT S_EINDT IS INITIAL.
PERFORM F17200_CHECK_S_EINDT.
ENDIF.
*end of insert by AW2150 GLDK9AAYU9
*eject
AT SELECTION SCREEN ON S_EKORG
AT SELECTION-SCREEN ON s_ekorg.
Validate value of purchasing org(s) entered on the selection *
screen by executing subroutine 0100_VALIDATE_PURC_ORG. *
IF NOT s_ekorg IS INITIAL.
PERFORM f0200_validate_purc_org.
ENDIF.
*eject
AT SELECTION SCREEN ON S_EKGRP
AT SELECTION-SCREEN ON s_ekgrp.
Validate value of purchasing group(s) entered on the selection *
screen by executing subroutine 0200_VALIDATE_PURC_GROUP. *
IF NOT s_ekgrp IS INITIAL.
PERFORM f0300_validate_purc_group.
ENDIF.
*eject
AT SELECTION SCREEN ON S_EBELN
AT SELECTION-SCREEN ON s_ebeln.
Validate value of purchase order(s) entered on the selection *
screen by executing subroutine F0310_VALIDATE_PURC_ORDER.
IF NOT s_ebeln IS INITIAL.
PERFORM f0310_validate_purc_order.
ENDIF.
*eject
AT SELECTION SCREEN ON S_WERKS
AT SELECTION-SCREEN ON s_werks.
Validate value of plant(s) entered on the selection *
screen by executing subroutine F0400_VALIDATE_PLANT.
IF NOT s_werks IS INITIAL.
PERFORM f0400_validate_plant.
ENDIF.
*eject
AT SELECTION SCREEN ON S_BSART
AT SELECTION-SCREEN ON s_bsart.
Validate value of Document type(s) entered on the selection *
screen by executing subroutine F0500_VALIDATE_DOC_TYPE.
IF NOT s_bsart IS INITIAL.
PERFORM f0500_validate_doc_type.
ENDIF.
*eject
AT SELECTION SCREEN ON S_PSTYP
AT SELECTION-SCREEN ON s_pstyp.
Validate value of Item Category entered on the selection *
screen by executing subroutine F0600_VALIDATE_ITEM_CATEGORY.
IF NOT s_pstyp IS INITIAL.
PERFORM f0600_validate_item_category.
ENDIF.
*eject
AT SELECTION SCREEN ON S_MATNR
AT SELECTION-SCREEN ON s_matnr.
Validate value of Material Number entered on the selection *
screen by executing subroutine F0700_validate_mat_number
IF NOT s_matnr IS INITIAL.
PERFORM f0700_validate_mat_number.
ENDIF.
*eject
AT SELECTION SCREEN ON S_LIFNR
AT SELECTION-SCREEN ON s_lifnr.
Validate value of Vendor entered on the selection by executing *
subroutine F0800_VALIDATE_VENDOR_NUMBER
IF NOT s_lifnr IS INITIAL.
PERFORM f0800_validate_vendor_number.
ENDIF.
*eject
AT SELECTION SCREEN ON S_MATKL
AT SELECTION-SCREEN ON s_matkl.
Validate value of material group entered on the selection screen *
by executing subroutine F0900_validate_mat_group.
IF NOT s_matkl IS INITIAL.
PERFORM f0900_validate_mat_group.
ENDIF.
*eject
AT SELECTION SCREEN ON S_KNTTP
AT SELECTION-SCREEN ON s_knttp.
Validate the value of account assignment category entered on the *
selection screen by executing subroutine 1000_validate_mat_group. *
IF NOT s_knttp IS INITIAL.
PERFORM f1000_validate_***_category.
ENDIF.
*eject
AT SELECTION SCREEN ON S_EBELP
AT SELECTION-SCREEN ON s_ebelp.
Validate the value of PO line item entered on the *
selection screen by executing subroutine F1100_VALIDATE_PO_ITEM.
IF NOT s_ebelp IS INITIAL.
PERFORM f1100_validate_po_item.
ENDIF.
*eject
AT SELECTION SCREEN ON S_LOEKZ
AT SELECTION-SCREEN ON s_loekz.
Validate the value of deletion indicator enterd on the selection *
selection screen by executing subroutine F1200_VALIDATE_DEL_IND.
IF NOT s_loekz IS INITIAL.
PERFORM f1200_validate_del_ind.
ENDIF.
Start of GLDK9A8WWS (AS3848)
Commented out the following block of code as a result of the removal
of the field VARIANT from the selection screen.
*at selection-screen on value-request for p_vari.
perform 14000_f4_for_variant.
End of GLDK9A8WWS (AS3848)
*Start of deletion AW2150
*eject
Block Added From Here TUL02022005
AT SELECTION SCREEN ON S_ELIKZ
*AT SELECTION-SCREEN ON s_ELIKZ.
Validate the value of Delivery Completed Indicator entered.
IF NOT s_ELIKZ IS INITIAL.
Check the Valid Values.
IF not SPACE in S_ELIKZ
AND not C_X in S_ELIKZ .
MESSAGE e999 WITH
'Invalid Delivery Completed Flag entered'(006).
ENDIF.
ENDIF.
Block Added Till Here TUL02022005
*End of deletion AW2150
*eject
AT SELECTION SCREEN
AT SELECTION-SCREEN.
PERFORM f15000_pai_of_selection_screen.
*End of GA23062003
start of insert AW2150 GLDK9AAYU9
IF S_BEDAT IS INITIAL
AND S_EINDT IS INITIAL.
MESSAGE E999 WITH TEXT-E01.
ENDIF.
end of insert AW2150 GLDK9AAYU9
MAIN PROCESSING **
*eject
START-OF-SELECTION.
START-OF-SELECTION.
Store report name and report size into temp. varaibles for later use.
w_repid = sy-repid.
Select OAs and Info Records to be displayed into internal table
PERFORM f2000_get_pos.
Store data into final reporting internal table
PERFORM f3000_store_data.
Begin of KAK01
Start of GLDK9A8WWS (AS3848)
Calls the subroutine for building the event catalog for ALV. This
event catalog will be used in the function module that will generate
the ALV report. Logic will eventually be used for the generation of
the standard report header on top of each page.
CLEAR v_events.
w_linsz = sy-linsz.
PERFORM f17100_build_events USING v_events.
End of GLDK9A8WWS (AS3848)
Use ALV instead of normal list.
Write data to the screen.
Populate ALV Field Category Structure.
PERFORM f8000_field_cat.
Populate ALV Exclude Structure.
PERFORM f9000_alv_exclude.
*eject
END-OF-SELECTION.
END-OF-SELECTION.
Begin of KVI04Feb05
IF W_FLAG EQ C_X.
CLEAR W_FLAG.
STOP.
ENDIF.
End of "KVI04Feb05
Display Report.
PERFORM f10000_call_disp.
*eject
AT USER-COMMAND .
*AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXEL'.
PERFORM F5000_DOWNLOAD_TO_EXCEL.
WHEN 'CLIK'.
IF SY-LISEL+1(2) EQ '45'.
PERFORM F6000_see_po_details.
ELSE.
PERFORM F7000_see_oa_details.
ENDIF.
ENDCASE.
End of KAK01
*eject
Form(s)/Subroutine(s) ************************
*Start of GA29072003.
*& FORM F0100_CHECK_S_BEDAT
Check if user entered appropriate date values as selection criteria *
----Hi!
After you click on the printer icon, a popup will apeear. Depends on the SAP system version, you are using, somewhere on the popup, you can find a filed, which is called SAP COVER PAGE.
Here you can choose, coverpage, without cover page, or standard cover page.
Regards
Tamá -
Hi experts,
actually in my ALV report i want to display the name of the report on top centre of the page. for this i used FM
ALV_REUSE_COMMENTARY_WRITE.
AT PRESENT I AM GETTING THE REPORT HEADING ON TOP LEFT.
COULD U PLZ HELP HOW TO GET THE REPORT HEADING ON TOP CENTRE .
REGARDS,
SIRI.Hi Sireesha,
Just try like this and see
WRITE 'Centered Text'(120) TO LS_LINE-KEY centered.
APPEND LS_LINE TO IT_TOP.
CONCATENATE v_date v_time INTO LS_LINE-INFO
SEPARATED BY ' '.
APPEND LS_LINE TO IT_TOP.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_TOP
I_LOGO = I_LOGO
I_END_OF_LIST_GRID = I_END_OF_LIST_GRID
I_ALV_FORM = I_ALV_FORM
Regards,
Vidya -
How to increase font size in report
Dear ABAPers,
I got one requirement that i hav to increase font size in report.
I am using Write statement in report.
PL guide me regarding this.
Regards,
Simha.hi shakya,
I have tried that,
i think font size cannot be increased.....it wil auto adjust based on ur no of coloumns and records.... try to reduce the no of coloumns u r displaying, then it will auto adjust itelf.
With regards,
S.Barani -
Font issue between Reports Designer and Report Output
Hi.
I've succesfully migrated several reports from 6i to 10g (10.1.2.0.2) with and without parameter form. However, I have the following font issue:
- When report is run from Reports Designer, font is kept.
- When report is run from a forms module (through rwserver on the same machine, that is not really from an application server, but using Oracle BC4J or Developer Suite enviroment) the report output is different. In this case a bigger font is displayed and occasional truncation happens for some fields.
The question is: How can i avoid this difference in font behaviour?. Is it font.ali related?. How come this happen on the same machine(Windows XP)? These reports are to be deployed on Linux, where reasonably, and font machine is expected to happen.
Font used: Arial (Occidental) 9this might be an issue with the printer that is associated also, and the permissions to the printer that you might have..
login to the application server machine and restart the reports server as an admin..try running the reports via the URL..i have a feeling that this issue might be somethiing to do with the permission(s) to the printer from your AS machine -
Display multiple parameters in report header
i am attempting to display a multiple parameter selection in my report header
i user
join({?parameter},",")
in the stored proc it is a varchar
in the formula editor i receive this error
a string array is required here
what do i need to do to display the selected parameter values
i have used this function before with varchars and have had no problemsi used the following syntax in my sp which produced the correct results. i just placed the parameter in the header without using the join function and it works like a charm.
ALTER PROCEDURE [dbo].[Pr_orn_whse_rcpts]
(@From_Crt_Dte datetime ,
@To_Crt_Dte datetime,
@whse varchar(90))
AS
CREATE TABLE #T_Localwhs
warehouse varchar(6) null
DECLARE
@var varchar(6),
@i numeric,
@whs varchar(6),
@chk numeric
SET @i = 1
SET @var = (charindex(',',@whse))
IF @var <> 0
BEGIN
WHILE (@i < @var)
BEGIN
--SET @var = (CHARINDEX(',',@whse))
SET @whs = LTRIM(LEFT(@whse, (@var-1)))
INSERT #T_Localwhs (warehouse) VALUES (@whs)
SET @whse = RIGHT(@whse, (LEN(@whse)-@var))
SET @var = (CHARINDEX(',',@whse))
END
INSERT #T_Localwhs (warehouse) VALUES (LTRIM(@whse))
END
ELSE
BEGIN
INSERT #T_Localwhs (warehouse) VALUES (LTRIM(@whse))
END
then you add a nested query to join it to the sp. as below. above your where statement.
JOIN
SELECT DISTINCT
Warehouse
FROM #T_Localwhs
) TW
ON in_wthdr_tbl.in_wthdr_frwhs = TW.warehouse
WHERE -
Need help showing multiple parameters in a report header
Post Author: Annette
CA Forum: Formula
hi-- i am new to this and i have created a report where the person picks one or more items (they are different hospital suites) and i need for them to print on the report header all of the selections that they chose. right now it only prints the name of the first one they choose..
any help would be good..
i do know it's a string value....
thank-you for anything you can help me with....
basically if 1 is picked then it needs to state that name, if 2 or more are picked id like it to say Name, name, name, etx...Post Author: Annette
CA Forum: Formula
the actual parameter is a number, but what im trying to populate on the heading is the name of the number..
for example... when you choose the resource unit of 31 when you refresh i want it to show the name of it which is ORA Surgery.... but if they choose 31 & 53 then id like it to show ORA Surgery, ORD Surgery.... right now it just pulls the first name choosen.. does that make sense..
so the parameter is a number, but the name(the one i want populated) is a string
and oh gosh,, thanks for your quick responses.. -
Excel o/p in Reports 9i-additional report header for every row
Dear All,
Is there any way to generate an Excel file output from OracleReports9i.Actually I have tried the simple report.
I am able to create a delimited output.But the prob is it contains an additional report header for every row of the report and this is very strange.Its coming like that
Empno Ename Job 7566 JONES MANAGER
Empno Ename Job 7902 FORD ANALYST
I need the Xls o/p like that
Empno Ename Job
7566 JONES MANAGER
7902 FORD ANALYST
8877 JAMES SALES
my Environment oracle9i developersuite /forms9i/reports9i
I have given DESFORMAT = DELIMITED
MODE = CHARACTER
I am able to generate the reports in html/HTMLCSSIE/HTMLCSS/PDF/RTF
Only delimited is giving problem
What should i do to resolve this issue. Please help me it is very very urgent for me.
Thanks in advance
Pavendhan.NI had the same problem and this is what I did, works great. You have the total control.
function BeforeReport return boolean is
fp text_io.file_type;
begin
-- creating a file name
:CP_filename := 'C:\Gap'||to_char(sysdate,'MMDDYYHHMISS')||'.csv';
-- Opening the file in write mode
fp := text_io.fopen(:CP_filename,'w');
-- writing the column headings into the file
text_io.put_line(fp,'"Platform","Sys#","GapType",');
text_io.fclose(fp);
return (TRUE);
end;
and then where ever it is suitable, depending on the requirement, write into file by opening it in the append mode.
function R_G_systemplatformFormatTrigge return boolean is
fp text_io.file_type;
begin
-- srw.message(99,:dname);
fp := text_io.fopen(:CP_filename,'a');
text_io.put(fp,'"' || :systemplatform || '",');
text_io.put(fp,'"' || to_char(:sysno) || '",');
text_io.put_line(fp,'"' || :CF_gaptype || '",');
text_io.fclose(fp);
return (TRUE);
end;
This works great. Hope this helps. -
Totals in report header?
I am using Crystal XI to develop a fairly simple financial report. One of the requirements for the report is to have a copy of the totals located in the Report Header section. It does not seem to be as simple as just putting the running total field in the header. When I do that it does not evaluate properly and the result is incorrect. What can I do to work around the limitation with Crystal? Maybe I need to design a sub report that totals the information and then supress everything but the Report Footer section on the sub-report?
Please try creating a sub report in the report header and assign the values to a shared variable and call the variable in the main report and place it in the below section of the sub report. And also note that you should not suppress the sub report instead suppress the sections inside the sub report and resize the sub report to smaller size.
How do I create a shared variable in the sub-report? Can you give me an example? I'm not sure what you mean by placing the variable "in the main report" ... "below the section of the sub report". Are you suggesting that I place both the sub-report, and the variable in the Report Header of the main report? If so, why? I imagine the variable would serve the same purpose as the sub-report. In the case, I could just use one or the other.
Maybe you are looking for
-
How do i get Thunderbird/Lightning to see my 2009 iCal calendar
friends: i'm using mozilla thunderbird and postbox as my email client. they both support the Lightning plugin which looks pretty cool. i would like to be able to read and write to my iCal calendar from Lightning. i know how to create a calendar in Li
-
Importing mailboxes & messages: OS 10.2.8 to 10.4.8
I've installed Tiger on my G4, with erase and install. I tried to import my old mailboxes & (archived on an external drive and a CD, from the 10.2.8 system) using the Mail import command in Tiger. In the archive Mail folder, each mail box shows there
-
Include non-cumulative key figure in InfoSpoke
Hi Experts, I am trying to create InfoSpoke for AR Line Item Cube(0FIAR_C03) with all infoObjects. This includes non-cumulative key figures such as 0DSCT_DAYS1 (Days for first cash discount) 0DSCT_PCT1 (Percentage for first cash discount) However, In
-
Error in WebDynPro Iview in portal.
Hello All, I have to create WebDynPro ABAB Iview to display the Application created in the same. I have followed this Blog Creating WD-ABAP iView and the WD Namespace and steps taken are. 1) Created System with R/3 Credentials and System is Up and ru
-
Error when calling a Javascript function loaded as a library
Hi All, I have some javascript functions in a custom js file which is in OA_HTML dir. I have loaded this js library using pageContext.putjavascriptlibrary("ABC","custom.js") in processRequest. When I deploy my code, there is a javascript error in the