Font Pack Changed All My Fonts! Please Help!
I Just got a new Font pack for Photoshop and installed all the fonts and now all of the sudden all my fonts have changed to somethign crazy I can barely read! When I browse the internet in any browser all the content is in this same crazy font, how do I change it back to default????
Most likely the font cache files on the system got trashed.
Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.
Similar Messages
-
Dear all,
Since wednesday morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?Last night I wiped the phone and did a complete restore. Lo and behold the wifi was working again after the restore finished. GREAT. 30 minutes later went to look at the phone and no wifi again, great!
So if my wifi chip coincidentally fried itself during the update, I supposed it coincidentally unfried itself during the restore, only to fry itself again later. Clever chips these. -
I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
Hi
I turned on my laptop this evening to import a new cd but it asked me if i wanted to download the new version of itunes so i went ahead to update it but it failed to update then it failed to open at all, and and runtime error keeps popping up but when i uninstalled it to reinstall it it wont install now and i cant use my ipod or ipad with my laptop without itunes and i never had this problem at all. can you please help?Hey maryncomiskey,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. The following resource may help to resolve your issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thanks,
Matt M. -
HiHi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do
Hi Samantha,
Are you aware that if you restore your ipad that you will lose all data from your ipad and very difficult to get it back unless you had previously made a back-up of your data on itunes or in the cloud. and that would be on the computer you set those up on. (There are some independent apps out there that might help restore data but I don't have any experience with them...)
Also, I think if you restore on another computer you're supposed to have administrator rights and have the latest itunes update. And I think if you sync (if restoring is considered syncing with another computer, you'll be locked out of your computer or a new one.)
I don't know if there is a way for you to safely eject your ipad from your mom's laptop and find another way, but please read this
http://support.apple.com/kb/ts1275
Also, I suggest you start a new post and title it something like First, stuck on update and now on Restore on another computer. Please HELP! And then tell the story of your problem that you originally included and your follow-up efforts to restore given a suggestion on previous post (though I think you SHOULD AVOID RSTORE if you can.) And refer them to your original post
https://discussions.apple.com/message/22050045?ac_cid=tw123456#22050045
Hope this helps and if you can get back to your ios before the upgrade, stay with it. I hope it all works out for you.
FYI - If it's a new or refurb bought within the past year you might be able to have it replaced by Apple. -
My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.
The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.
-
my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.
my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.
-
My software is STUCK on "Retrieving current session status" What is this and how do I fix it? i am not able to convert any files at all!! Please help!
Hi JulietaQ,
In order to help you better.
Please let me know which application or Service of Adobe you are using. If this is subscription i would request you to log-out and log-in back and let me know if that helps.
~Ajlan Huda -
I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!
You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
i want to change my security question in my apple account. but the problem is, there is no Link shown that i could reset or change my security questions. please help!!
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(117399) -
Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got extra money to spend..
Just what happens when the restore does not complete?
Error message?
Does it freeze? Is so what is listed in the status bar of iTunes? -
I want reset my sec questions. I can't change sec question. Please help me
I want reset my sec questions. I can't change sec question. Please help me
Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
(90265) -
why my device had "no service" ..I have follow a few instruction from you tube how to solve this problem but all failed. Please help me .TQ
See if anything in this support document help http://support.apple.com/kb/ts4429
-
I just got my iphone and i want to get all my apps and music from my ipod onto my iphone. the only problem is that my itunes is not recognizing my iphone in the devices. in fact there are no devices at all listed. Please help!
See either:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows -
I can't create rescuse email to change security questions. Please helps me create rescuse email
I cant create rescuse email to change security questions. Please helps me create rescuse email
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps you get the questions reset :https://discussions.apple.com/docs/DOC-4551
e.g. you can try contacting iTunes Support :http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing the number for Apple in your country and ask to talk to the Account Security Team : http://support.apple.com/kb/HE57 -
Setting Library fonts, please help
Im currently working with a library i created in Indesign, here's the problem. When I open a certain document, and place an item in the document from the library, it uses a different font in the library item than what i created the library with. Example: I set all the itesm in the library to Helvetica Black, yet when I put i in the document, it sets it to ITC Stone Sans. This is very frustrating as I have to use many items from the library. Ive tried setting a default font for the document but that that didnt work, please help, thanks.
Text in a library carries with it an applied paragraph style. When you place such a library item into a document, then it all depends on whether or not the paragraph style in question already exists in the document.
If it does not, then the style is added to the document and the text is likely to stay in the same font as it originally used (I hedge a little because of the possibility of a change being introduced by a based-on relationship).
If it does exist in the document, then the text takes on the definition already in the document and loses that previous definition. This is most likely what is happening to you.
Dave
Maybe you are looking for
-
MSI GT70 0NC 494 - Samsung 840 Evo Problem
I recently brought a Samsung 840 Evo 500GB to replace the WD Black HDD on my MSI GT70-0NC-494 laptop. OS is Windows 8. Im going type out pretty much how I ended up to where I am right now in hopes that maybe someone could catch where I went wrong. So
-
How to remove update notices in Creative Cloud app?
I want my team to stay on InDesignCC for the time being (not InDesignCC2014). Is there a way to remove/hide/demote/ the persistent UPDATE 2014 notices at the top of the Creative Cloud app? Creative cloud for Teams.
-
I am using Safari in Mavericks 10.9.2. When I download a PDF the file is named in a file but the folder is empty. Any solutions? Also when I open my bank statements in PDF I loose the adress bar. Any ideas? thanks using adobe reader 11.0.06
-
I cant sync music on my ipod it says error 13019
-
Traveling to Czechoslovakia and Hungary and puirchased the Apple Worldwide Adapter Kit. I'm confused about which adapter plug to use with my MacAir. What does the correct plug look like? Thanks