Font problem after reinstallation of the os

Hi
I reinstalled lion and after that I get glyphs when writing instead of letters. Does anyone have any solution ?
Thx

aleksandar2507981 wrote:
ok progress update, after i switched to serbian which is supposed to be cyrillic all is good i mean i have latin keyboard working properly...
It's working properly because when the option key is always depressed, the Serbian keyboard switches from cyrillic to latin.
Try an external keyboard. If it works ok with the layout set to US, then your internal keyboard may be damaged and need repair or replacement.

Similar Messages

Font problems after upgrading the OS today

I upgraded this morning to 10.6.3. After upgrading:
In Keynote and in Pages several fonts (10 or more) like Cochin, Optima, etc. are not useable any more. If I open a document all characters of a text written in these fonts have changed and compressed in one place in the textboxes. Keyboard layout of the keys is also destroyed. If I change the font to one which is ok , the text is ok too. Disabling the font or changing the fonts in question is the only way to go now.
The preview of the first page of a document in finder for those fonts is still correct. Also the display of the font in the font-program is correct. If I cut and paste text to a different program, the text will be display correctly for the fonts in question.
This seemed an internal problem of iWorks. Help wanted.
regards
esser

Welcome to the discussions, f.esser.
There are two things I'd try, first, to see how large the problem is, create a new user on your computer and see if there's a problem with those same fonts under that user. If not, that indicates that something under your main user has been installed that affects that usage. If you still see problems under the second user, then it's a deeper OS problem.
Second, reinstall iWork from the disk. If it's a minor problem with iWork and the new OS, performing that, then updating to the latest iWork should fix it.

E52 Font Problem after software upgrade

Hello!
I have a little problem after upgrading my Noki E52 with the newest software version. All fonts are large, even if i set them to be small in display settings. So, my question is if there is a solution of this problem?
Thanks in advance!

i afraid to upgrade.. so many problems with new update.. hmm...
i don't have any idea but gl to find solve!

[Solved] Strange font problem - after update.

Hello guys,
encountered a strange small font problem on sites with code wrappers like stackoverflow/blogs/jsfiddle. After update. took a look at my font setup all looks good.
I've also checked the settings for gtk2/3 and no problems there.
INFO:
Google-Chrome-Beta. [same thing]
Firefox [same thing]
/etc/vconsole.conf ->
KEYMAP=sv-latin1
FONT=ter-112n
.gtkrc-2.0->
gtk-theme-name="Clearlooks"
gtk-icon-theme-name="Faience"
gtk-font-name="Tewi 9"
gtk-cursor-theme-name="Adwaita"
gtk-cursor-theme-size=0
gtk-toolbar-style=GTK_TOOLBAR_BOTH
gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
gtk-button-images=1
gtk-menu-images=1
gtk-enable-event-sounds=0
gtk-enable-input-feedback-sounds=0
gtk-xft-antialias=1
gtk-xft-hinting=1
gtk-xft-hintstyle="hintfull"
gtk-xft-rgba="none"
/gtk-3.0/settings.ini->
gtk-theme-name=Clearlooks
gtk-icon-theme-name=Faience
gtk-font-name=Tewi 9
Any ideas on this problem would be greatfully appreciated.
http://imgur.com/MD7yPI2
Mod note: removed huge image -- WorMzy
Last edited by Learning (2015-05-22 21:55:07)

Update:
Tried reinstalling, change the fonts, remove all font clear the cache.
change, look up the settings, looked up size, tried monitor dpi.
checked all the config files for anything remotely related to this problem.
Had a quick look at the bug tracker for google-chrome-beta as well no reported
font problems as far as i can find.
Update2:
Tried adding custom.css to the browser not even that worked.
update3: [SOLVED]
So i solved the problem.
The problem was a faulty font that was stuck and used in the pre somehow.
Removed and added another to the list and somehow that worked.
recommendations - if anyone has this problem in the future.
open firefox and look in the font tab what is used. and remove that
or try to install a fixed one. that should work.
-Nothing has yielded any working results.
So any ideas at this point would be most appreciated.
Thanks,
-L
Last edited by Learning (2015-05-22 21:59:14)

Problems after upgrading to the iPhone 5S

After upgrading to the iPhone 5S 2 weeks ago I've had nothing but problems. It's quite sad because I had the iphone 4s for 2 years and had no problems whatsoever. Anyways... ever since I got the new phone I've been getting the "imessage waiting for activation" message on and off everyday, and today my phone started freezing on the lock screen and then restarting itself over and over. It won't let me press any other button and is unresponsive when I plug it into itunes.
I've already called my cellphone service provider (Bell) and Apple tech support and had no help from either.
Should I take the phone in to get it replaced? Do I go to Bell or Apple?
Help Please! I've tried everything off of these forums!

Restore the iOS software using iTunes, first also restoring a backup, and if needed as new, without using a backup/
iOS: How to back up and restore your content
iTunes: Restoring iOS software
iOS: Unable to update or restore
If restoring as new, without restoring a backup doesn't help, you need warranty servcie from Apple, not Bell

Display font problem after synchronization

On my handheld device, i have both Chinese and French appointment. When I did a hot sync. to my new netbook with window 7 Starter and Palm Desktop by Access, v6.2.2. All the Chinese font become "?" and all the French accent, ie "ç" and "é" became "?".
Is there a way to change the font setting on Palm Desktop by Access?
Post relates to: Palm TX

I figured out the problem. Mavericks comes with Fontcase. I had dumped Fontcase long ago and went to a different font management program. The conflict was between those two programs. I had to get rid of my third party progam to make the display font in any browser and some other programs to work correctly.

Can't reinstall IPhoto and IMovie after reinstallation of the operative system.

I made and reinstallation of the entire operative system of my Mac. But now having the MAc oS X Lion 10.7.5 I can't reinstall some apps as IPhoto and IMovie. They said I need the 10.9 version.
How am I proceed?
Thanks'

Download Mavericks from the Mac App Store, or install those applications from a DVD; iLife 11 DVDs are available from sources such as Amazon and eBay, and if your computer's incapable of running Mavericks, it'll have come with disks which can be used to install them.
(113151)

FIrefox won't connect to Google, GMail, or Firefox help. It works after reinstallation but the problem returns after a few hours. Can someone help?

I have disabled extensions, cleared the cache, and run spyware. I also have the same problem with other browsers, but Firefox is the only one I use. I am running Windows 7 home edition. I am using my Mac laptop to ask this question because my Windows Firefox browser will not let me connect to the help site.

chiduke i think because this problem exists in every browser, its not an issue with Firefox browser, i think your windows machine is under attack by some malicious software or your spyware is blocking the access to internet.
Did you say you are able to access for some time after you reinstall Firefox, i don't actually know why it works think its working until the malicious software or your spyware detects Firefox's presence and blocks the internet.
Try to start your machine in Safe mode, i mean windows. (Don't know how as i don't use windows but i know there is a safe mode when i Googled it say you can access internet only in safemode with networking option enabled so make sure you open in that), try to access the web & test for few hours if it works then its a problem with windows. May be you can ask windows support for help.

Problem of Adobe ID activation after reinstallation of the device

I had my Adobe ID activated into my ebooks readers (Aldiko, Bluefire readerà on my device (Samsung Galaxy Tab 3 / Android 4.2..2). After a problem, I had to reset entirely my device and to reinstall the ebooks readers softwares. Now, everytime I want to authorize my favorite ebook-reader with Adboe ID, I get the message "Limit the number of authorized devices is reached". Could you please help me ?

Hi Ferdinand,
You can change the Adobe ID and this will not make any difference on your existing Machine.
Regards,
Abhijit

Font problems after 10.6.2 upgrade

Hello!
Just after upgrading to 10.6.2, al the iwork documents (Pages and Keynote) that use Time New Roman (originally Office documents) are unreadable due to a kerning problem that affects only this font (that I know of).
Did somebody had the same problem and have the fix? I already removed the duplicate fonts. Thanks.
Message was edited by: ddoneda

I migrated several Word files over to Pages recently. The only warning I got was with Times New Roman in one file which was odd as all the files use the Times New Roman (TrueType font). Once the files were open I changed all the text to Pages Helvetica without any problems (I use Word (Office 2007) under Windows and Word (2004) for Mac OS for documents with bibliographies). My initial problem with Pages was due to Hoefler font which was resolved when I trashed it.

Font problem after upgrade

After upgrading from 10.6.2 to 10.6.3 I noticed a problem with fonts on my system In some dialogue boxes the fonts are not displaying correctly (see image below).
http://bit.ly/aRNJGB
And along the menu bar fonts are no longer lined up (see image below).
http://bit.ly/bWb1zm
Anyone any ideas why this might be? I don't know for sure if it's related to the upgrade but it did happen after restarting when installing the upgrade.

I notice that one of them is with Lucida Grande so ran Resolve Duplicates on that. It seems to have fixed the issue.
I remember that now. A few folks have run into this issue when upgrading a Leopard install to SL. What's likely happening is that the SL installer is not deleting the old version of Lucida Grande. So I would bet you have both the older version, LucidaGrande.dfont, in the same folder as it's newer version, LucidaGrande.ttc.
Check the /System/Library/Fonts/ folder. If both are there, delete LucidaGrande.dfont. You'll need your admin password to complete the action. If the font returns on its own after deleting it, then you'll need to remove it from two places.
First remove it from the hidden location where the copy comes from. It's at:
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/A TS.framework/Versions/A/Resources/ProtectedFonts/
You should see the same two versions of Lucida Grande in the ProtectedFonts folder. Delete the .dfont version. Then go to the /System/Library/Fonts/ folder once again and delete the .dfont version from there. With its copy gone from the ProtectedFonts folder, it will be gone for good.
If you only have the .dfont version in the ProtectedFonts folder, make sure to copy the .ttc version of Lucida Grande into it. If you need to do that, also make sure to Repair Permissions.

IMAC: when we try to download PDF or .xlsx files, Firefox crashes. Recent problem after upgrading to the most recent version.

PDF and .xlsx files are unable to download without Firefox crashing. Running on IMAC, current OS.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

VISA Read over USB Problem: After a while the xBFFF0015 Timeout Error occurred

Hi,
I have trouble using labview with my non-NI USB device:
The device is an analog input DAQ board. I was able to setup communication with the board using a VISA driver specifically created for this board and direct FW calls using the product's firmware specification provided by the manufacturer.
This method has been working pretty good so far, but when I try to get large amount of data (64k samples @100ksps), the VISA Read returns the 'VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.' error.
Please see the attached screenshot of the block diagram for details.
First, an 'analog input scan start' command is sent to the DAQ device, and then the vi tries to read all collected data from the device, once the right amount of data retrieved, or no more data is available the data collecting process (the while loop) ends and an 'analog input scan stop' command is sent to the DAQ device.
The data collection starts with no problem, but after a while, in loop# 400, the VISA Read hangs and then returns the error mentioned above.
I tried to increase the time out value, but it didn't help, the error occurred after the same number of loops, the VISA Read got hosed and the error occurred after the longer timeout expired.
I also tried to add some delays in the loop, but it didn't help either.
I am not sure what do I miss here and I would highly appreciate if anyone could give me some guidance how to solve this issue.
Thanks,
John
Attachments:
usb-read.png ‏18 KB

I just wanted to specify that this is not an NI board avoiding to make people think this is a hardware issue. And I think that the rest of the code is irrelevant in this case.
I believe that I don't use the VISA functions correctly. I assumed that someone who used these functions before would be able to point out the obvious steps missing in the data collecting process using the VISA functions.

PC Suite problems after upgrading to the newest ve...

My Nokia PC Suite just notified me there is a new version. I had no problems running the previous version under my Vista but thought - what the hell, let's see what's new.
It turns out the upgrade disabled my internet connectivity (one touch access says no modem found), PC Sync is not working (cannot synchronise and when I click the "settings" button nothing happens) and I don't see the Nokia Phone Browser in Windows Explorer.
Tried reinstalling the Suite and connected apps, did not help.
Am I the only one with such problem?
(PC Sync 6_84_10_3_eng, Vista Ultimate 32bit ENG)Message Edited by tomekb on 28-Jul-200711:00 PM

28-Jul-200710:57 PM
tomekb wrote:
My Nokia PC Suite just notified me there is a new version. I had no problems running the previous version under my Vista but thought - what the hell, let's see what's new.
It turns out the upgrade disabled my internet connectivity (one touch access says no modem found), PC Sync is not working (cannot synchronise and when I click the "settings" button nothing happens) and I don't see the Nokia Phone Browser in Windows Explorer.
Tried reinstalling the Suite and connected apps, did not help.
Am I the only one with such problem?
(PC Sync 6_84_10_3_eng, Vista Ultimate 32bit ENG)Message Edited by tomekb on 28-Jul-200711:00 PM
Hi.
I've got exactly the same problem. Upgraded from 6.81 to 6.84. I don't really care about 'many' options that pc suite offers, I just want to know WHY THE HELL when I press the SETTING button in PC Sync NOTHING HAPPENS??
I'm really anoyed now, can't sync my data at all. Thanks to you nokia developers...
I'm also running windows vista 32bit and don't tell me I should use a system restore option as it doesn't work even... Believe me, I've tried it not only once. After the restore, it says that I need to reinstall the pc suite... very funny.
DO SOMETHING for god's sake :/
Ohh... I also did the same what @dozer did. Uninstalling PC Suite, purging the Registry of all Nokia entries etc etcMessage Edited by zyxma on 30-Jul-200701:25 AM
ex N97 20.0.019 owner
Happy iPhone owner with ALL features actually working :]

Font problems after 10.6.7

I'm getting lots of strange behaviour relating to fonts since updating to 10.6.7. This is all in things that used to work perfectly.
PostScript output causes errors in Distiller (problems in font definitions); and manipulating PDF objects can cause embedded fonts to become .... unembedded.
As I understand it, there were lots of security fixes to font handling in the update, but it seems to have caused loads of trouble.
The developers for an app I use, Imposition Wizard, have confirmed that things aren't working as they are supposed to and have filed bug reports with Apple.
However, as I do a lot of work with PostScript and PDFs, I will have to reinstall the OS to 10.6.6.

it's impossible to know how my particular combination of hardware and software (Finale music notation; Distiller; Imposition Wizard) is going to react in the absence of other people doing exactly the same thing.
You don't need other people's experience for this, just an extra drive with a partition where you can install an upgrade and test your requirements before moving to it permanently. Lots of people who cannot afford to have OS update problems work this way. Superduper has a "sandbox" feature which makes this really easy.
I always think that if you're going to reinstall the OS, best do it fresh rather than a clone that may already have some cruft on it.
Perhaps. The main value of the clone is that you can keep working without losing the time required to reinstall, which could be important for a particular user on a particular day.

Font problem after reinstallation of the os

Similar Messages

Maybe you are looking for