Font Problem in SmartForm
Hi,
We have developed an Invoice in SmartForm which will display data in English and Thai Language. We have seperate Paragraph and Character Formats for them defined in one SmartStyle.
Now depending on the language some free text are maintained we have defined the conditions with TEXT outputs and displaying in THAI or ENGLISH Language.
The text which is hard coded in the Invoice (wether in English or in Thai) is displaying properly. But the text coming from data base on which we have put conditions based on language is having problem. The Thai characters are printing properly but English text is coming in smaller font.
Please help.... and thanks in advance
No Actually the Font size is same for both. still the ENglish text is displaying very small compared to Thai text.
and this is for the texts where data is coming dynamically.
Hardcoded texts are displaying and printing properlly in both fonts.
Similar Messages
-
Font Problem in Smartforms output
Dear all,
The smartforms which i have developed was working fine before. All on a sudden, the print out and print preview of all smartforms is not giving proper output. I am facing following problems.
Whatever the font size we are defining in smartforms, it is not reflecting on the Print preview output correctly.
Alignments are changed for all the smartforms that we have developed.
In most of the forms output, it is giving black shade in the boxes.
It is affecting all the smartforms output developed so far..
Few points i have noticed are:
It is not a problem with my system. It is working fine in IDES and Sandbox server.
I compared all the settings of smartforms with my DEV system and IDES. It is also same.
Things I have done one day before all these mes up:
I removed the MS Word editor for the smartforms in the transaction I18N.
Even after I removed the MS Word editor, I tested my smartforms output so many times.. it was working fine.. But all on a sudden i noticed the changes in output..
Can anyone please help me out in solving this?Thanks for your replies
Hi Nick,
I have checked SPAD transaction now. But i couldn't spot what you are suggesting me.
Can you please tel me what should be the printer definition and printer types?
Hi pavan,
I tried ur option, uploading smartforms from IDES.. but it is giving problem in that too.
Hi Sravanthi,
the table node is not shaded.. the problem is not with this..
Regards,
Prem -
Fonts problem with Smartforms...
Hi Gurus,
I have a problem with fonts in smartforms.
My smartforms fonts are working fine in testing server but not working fine in development server. We work like after development we transport the object to stage (Testing) & then to production. I see the last modifications done were 1 st may 2008 but in development the last changes are shown 7th July 2008. So what I think is the object is not completely transported to testing server? What could be the other reason please let me know ASAP.
Thanks,
HemalHi Hema,
May be the reason that your smartsyle is not activated .Jus check whether the smartstyle is activated and transported properly.
Regards,
Sravanthi -
Hi All,
I have a requirement where i need to display Large Font size in Smartform. I am able to display the same for the PRINTER in print preview.
But when i print the smartform, the font is printed in very small size.
I think it is because the printer is not supporting the font.
Please let me know the workaround for such problem.
Thanks,
Best regards,
Prashantmethod for font size....
Define the paragraphs & character formats using SMARTSTYLES & use them in your smartform.
You have to give the smartstyle name in the Form attributes-->Output options for the formats to be used in your smartform.
frm ur pc only u can get this font file..
go to control panel , in tat go to font and select your desired font file..
now give the path of this font file in se73..
after doing that this file will be uploaded into ur SAP server.
Se73 - > True type font installation - > Font name - > specify the name of the font file - > execute -
Hi Experts,
I am facing a problem in Smartforms.... I have taken a font size 3 and font type courier for specified text print,
But the problem is that at the time of Print preview its show very small but after print in Line Printer it aromatically
change the font . Print takes big font automatic.
Pl suggest me....
Thanks & Regards,
SwapnikaPlease check the printing from your word document. Keep the required fonts and sizes in the word document.
Later we try the smart form font issue. -
Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
Using 10.6.8 on MacBook Pro
MikeaaaI am running Snow Leopard. Transferring the same texts to TextEdit has no problems, so this is a Pages problem, I think. Corruption of Times New Roman and Arial fonts, I suspect, but where? and what do I do about it? I just need to be pointed to a source of advice, I think.
Thanks
Mikeaaa -
I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again! -
How to change font size in smartform and set layout of smartform
Dear abapers,
I want to change font size in smartform and also set the layout of smart form how can we do this.
Thank you sir.Hi,
you can do it first you need to goto smartforms tcode there click on radiobutton 'Style'.
Give any name and click on create. Right sideyou can find character format right click on it and create a node .A pop will raise gve a 2 characterlike z1 or a1 etc click on font tab gve size and font style and click on save and activate. Use this style in your smartform you can apply what ever styles created in styles you can use it in your smartform by that smartstyle name.
When we create text in output options give your smart style name and click on general attributes . Select your text and apply the style what thse size it should be and what the font style it should be.
Goto smartforms tcode and select formpainter in application bar set layout according to your requirement.
Thanks,
venkat -
10.6.8 combo & 10.6.7 pdf fonts problem
Does the 10.6.8 update combo correct the pdf fonts problem that was inherent to 10.6.7? After a couple days of stress I had to do the lengthy 10.6.7 uninstall process in order to refine my doctoral dissertation. This has made me gun-shy & fearful of updates. Is it safe to update now?
The combo should fix your problem. As always have a back-up in case you have to revert.
The Font update came out to fix the problem in 10.6.7
http://support.apple.com/kb/DL1377
It should be rolled into the Combo-Update:
http://support.apple.com/kb/DL1399 -
HT1338 Font Problems with Snow Leopard
I'm having font problems after updating to Snow Leopard. It seems to have problems with spacing the fonts properly and reading some fonts properly in Page and Keynote. Any suggestions of how to fix it?
Dear Kurt,
in bigger companies thinks come slow :-) Actually we are switching from 10.4.11 with Quark 6.52 and FontReserve to 10.6.8 with Adobe CS5 and FontBook.
And as you may guess we're running directly into the HelveticaNeue problem.
We cleaned up the system fonts so that only the absolutly needed are in /Sys/Lib/Fonts/ and all other fonts (from MacOS and our own) are in /Lib/Fonts/ where they are in folders for better handling.
The number of additional fonts were radically stripped down to the REALLY needed (about 70 fonts with their families).
We removed the protected fonts and replaced Helvetica, HelveticaNeue, Times, Symbol and ZapfDingbats with PS Type1 fonts.
Our goal was to have no font conflicts to keep our users save. In addition we put fonts in predefinded collections to switch them on/off with an AppleScript that picks the collection name.
And from here it went fancy: The Apple apps are working fine but external app like Adobe CS5 and MS Office only see the fonts in /Sys/Lib/Fonts/.
When we put the HelveticaNeue.dfont back (no matter if it's in the system or at ~/Lib/Fonts/) the other apps also get all installed fonts. We found out that this works even if the HelveticaNeue.dfont is deactivated.
Unfortunately this brings up two problems:
The HelveticaNeue.dfont can't be put to a font collection without taking the corresponding font from the Type1 font with it, so it's more difficult to handle with the AppleScript (we have to pick the exact single name).
The second is that if something goes wrong and all fonts are switched to active we have a font conflict and the possibility that the dfont is used in documents.
I think I have read all (ok, many :-) of your posts about the Helvetica problem in 10.6 as well as your really great document about font handling in OS X.
But I wasn't able to get it to work.
Do you have the one big hint for me???
Thanks and best regards... Udo -
Ugh.
MBP13 7,1 (mid 2010) 2.4g C2D 4G Ram
I use Vectorworks 2011 to produce CAD drawings for customers and the plant. Recently I began having issues with my PDFs of my CAD not being fully distilled - various issues but primarily most dimensions not visible. I have read that PDF issues cropped up beginning with 10.6.7 and that certain PS fonts can be the issue. As well as outdated PDF readers used by my recipients. In a short-sighted fit of frustration I began monkeying with Font Book and Font Caches.
My maladies are
1. My PDFs are incomplete
2. Received MS Office filed open "blank". Now MS OFFICE 2011 no longer has common Fonts such as Arial and Times Nee Roman.
Can I fix this or do I need to go back to 10.6.6 and reinstall Office?
Thanks in advance.
BTW this forum is surprising difficult to nav on an iPhone.MS Office font Problem solved in case anyone else stumbles upon this.
http://hints.macworld.com/article.php?story=20110810001909244 -
I posted this over in the Classic forum...but it's rather dead over there and I fear it may not be seen for a while...so here's the problem...
I'm running Quark 4 in Classic and having trouble with fonts. Though the fonts are on my computer, and in the OS 9 fonts folder, they won't print correctly. If I use the same printer and print from Quark on my old iMac (running OS 9) the fonts print and look fine.
I read another thread in this forum that mentioned the fonts must be OS 9 fonts (and must not have been run through suitcase or a similar managing program???). So, on the off chance that my husband or I just took OS X fonts and copied into the OS 9 folder, I copied the OS 9 fonts from the iMac (I just grabbed everything in the Frutiger family, as it was one that I had an issue with) and then dumped them into the OS 9 fonts folder on my iBook. I restarted Classic mode in order to make the fonts available to the OS and then printed again. The font still prints all pixeled-looking.
Can anyone tell me what I'm doing wrong? Do I need to find the original font disc and install them from the disc?
Any help would be most appreciated!!!!!Hi Diane,
Glad that the tip helped to "solve" the font problem!
Not sure why you are printing the file info at the bottom of the page. It does sound as if it is a print setting somewhere though. Hopefully someone has a clue for you.
Again, thanks for the "solved" star and if I can think of something else for you to try I'll post back. Let us know if you figure it out.
good luck,
littleshoulders
edit:
"In lieu of an answer...I tried changing the paper size to legal and it's not on the last copy I printed."
Ooops, I misread your reply, and see that by changing the paper size it corrected the issue.
Message was edited by: littleshoulders -
Character Problem For SmartForms to Pdf .
Hi Experts ;
my problem about smartforms . I have a custumer list. I use smartform for output. Customer list of smartform ok . Have any problem . But I convert this output to PDF . Some Characters are overlapping . My main language Türkçe(Turkish) . Characters is incorrect for struct of laguage .( smartform output has no problem but pdf output have problem )
My Code :
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME.
PARAMETER: p_date LIKE sy-datum.
PARAMETER: p_rea TYPE char255.
SELECTION-SCREEN: END OF BLOCK b1.
DATA: ws_ucomm LIKE sy-ucomm.
DATA: gt_intab TYPE ZSMRT_DNM_T WITH HEADER LINE.
INITIALIZATION.
SET PF-STATUS 'GUI'.
PERFORM get_data.
AT SELECTION-SCREEN.
ws_ucomm = sy-ucomm.
CASE ws_ucomm.
WHEN '&PDF'.
PERFORM f1000_download_form.
EXIT.
WHEN '&BACK'.
LEAVE TO SCREEN 0.
EXIT.
WHEN '&EXIT'.
SET SCREEN 0.
EXIT.
WHEN '&canc'.
SET SCREEN 0.
LEAVE TO SCREEN 0.
ENDCASE.
f1000_download_form
FORM f1000_download_form.
DATA: form_name TYPE rs38l_fnam.
DATA: wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop.
DATA: t_otfdata TYPE ssfcrescl,
t_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i.
DATA: w_bin_filesize TYPE i.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZDNMSMRT'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_ctrlop-DEVICE = 'I9SWIN'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION form_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = wa_ctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = wa_outopt
user_settings = 'X'
mydate = p_date
reason = p_rea
ADRNR = '23713'
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = t_otfdata
JOB_OUTPUT_OPTIONS =
TABLES
RTAB = gt_intab[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 150 "132
ARCHIVE_INDEX = ' '
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = w_bin_filesize
CODEPAGE = ' '
filename = 'c: est.PDF'
filetype = 'BIN'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
filelength = w_filesize
TABLES
data_tab = t_pdf_tab
FIELDNAMES =
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE i003(z00) WITH 'File not downloaded succesfully'.
ELSE.
MESSAGE i003(z00) WITH 'File Test.pdf downloaded succesfully '
'under C drive'.
ENDIF.
ENDFORM. " F1000_DOWNLOAD_FORM
*& Form GET_DATA
FORM GET_DATA .
SELECT kunnr belnr gjahr from bsid
INTO CORRESPONDING FIELDS OF TABLE gt_intab
WHERE bukrs = '4000' and gjahr = '2007'.
LOOP AT gt_intab.
SELECT SINGLE name1 from kna1
INTO (gt_intab-name1)
WHERE kunnr = gt_intab-kunnr.
MODIFY gt_intab INDEX sy-tabix.
ENDLOOP.
SORT gt_intab by kunnr.
ENDFORM. " GET_DATA
Regards .Try following logic:
DATA: lt_data TYPE TABLE OF tline,
lt_data1 TYPE TABLE OF tline,
lt_objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
Convert OTF to PDF
REFRESH: lt_data.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_binfilesize
TABLES
otf = la_jobout-otfdata[]
lines = lt_data[]
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc <> 0.
Error during conversion from OTF to PDF.
ELSE.
Creation of the document attachment
REFRESH: lt_data1.
CALL FUNCTION 'TABLE_COMPRESS' "#EC *
TABLES
in = lt_data[]
out = lt_data1[]
EXCEPTIONS
compress_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
Error during compress operation of the data
ELSE.
REFRESH: lt_objbin.
CALL FUNCTION 'TABLE_DECOMPRESS' "#EC *
TABLES
in = lt_data1[]
out = lt_objbin[]
EXCEPTIONS
compress_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
Error during decompress operation of the data.
ENDIF.
ENDIF.
ENDIF.
Pass table lt_objbin[] to WS_DOWNLOAD function module. It should work.
Thanks
Amol Lohade -
Hello,
I have the following problem for 2 days now:
http://img154.imageshack.us/img154/1462/bild1.png
I did not install anything. I tried to delete font caches but it did not help.
I re-installed the system but that did not change anything. After resetting the PRAM the problem was solved. At least for some hours, but now the problem appeared again.
When I do a reboot, strange white lines appear over the grey background and the Apple Logo, then the screen turns blue, the cursor consists of white lines too and nothing more happens. After several tries to reboot the Mac is running again, but the font problem still exists.
First I thought of a graphic card problem, but it seems that this font problem only concerns system prefernces and system applications.
I have no idea what to do now, so please help me.Hi "Apfelkrautsalami"
Font caching information is stored on a per-user basis in
/private/var/folders
I have no idea if it'll help, but you could try this:
- Open a Terminal and do
*sudo rm -rf -- /private/var/folders/??*
- Restart your machine
(Note 1: The '--' prevents rm to think that folders like '-5' are options)
(Note 2: The '??' will match any two-letter directory. I didn't want to say '*') -
Hey guys
I have a font problem with iTunes... I get some vertical lines instead of letters... How do i fix this problem?
ThanksJust a temporary glitch - removing fonts which aren't compatible solves the problem.
Maybe you are looking for
-
Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client ha
-
How to create a certificate using keytool / terminal?
I have problems with creating certificates using the terminal. I use the instructions below and typed in all the required information. When it asks me to type "yes" and confirm, the whole process just starts from the beginning over and over and I hav
-
I really don't want a ringtone on my iphone but I tried to use the feature and simply can't get it to work. When I click on the bell in my library (already have purchased songs) I get asked for my password. I enter my password and then it asks again
-
Multiline container --how to assign agents in subworkflow
Hello Friends, I have mutiline element with 3 agents type wfsyst-sgent. I am triggering a subworkflow and assigned this multiline element in others. Now what is the agent name in the subworkflow. Because it is triggering 3 times the same task to on
-
Make timeline more like Premiere Pro?
On Elements, the audio and video on the timeline are coupled, one right beneath the other. Is there any way to make it function more like the Premiere Pro timeline with audio and video completely separate?