Font problems, not sure how to deal with

Hi,
I recently opened an archived final cut pro project and suddenly all of the Livetype files couldn't be rendered because a font was missing.
This seems to be happening slowly as the project before that suddenly stopped using one of the fonts I had installed ( I ignored it figuring that it might possibly be a license that had gone out).
At any rate, I posted this in Livetype forum but hadn't received an answer yet. I just went in to font book and I have an exclamation point in a yellow triangle with a warning below that says:
'Multiple copies of this font are installed. You can use the Resolve Duplicates Command to automatically deactivate the copies not in use.'
Does this have anything to do with my problem?
No one seems to be able to answer so far and this is costing me money by the minute.
Thanks

Christopher --
If you have two (or more) of the same font enabled, yes, it could very well cause your problem.
Do you see the two fonts?
Open them up with the triangle, and look closely at the properties. (date,etc)
If you hover your cursor over each font, you will see more information).
Then click "Resolve duplicates" and try again.

Similar Messages

  • My iphone 5 open-close key does not work,how to deal with?, my iphone 5 open-close key does not work,how to deal with?, my iphone 5 open-close key does not work,how to deal with?

    I bought the iphone5 on your online store on Nov24. 2013, Last year, I came back China. more ten days before, my iphone 5 's open-close-key did not work. I contact Apple's China, but they told me that they could not help me repair the problem, how to deal with ?

    What is the "open-close" key?  Do you mean the power button or the home button?
    FYI, these are user to user support forums, you are not addressing Apple here.
    Warranty and support are ONLY valid in the country of origin.

  • Math functions not sure how to work with them

    Im trying to work out the math functions into my program, but I'm not sure where is the mistake. This is what I have now:
    (a) y = ax^2 + bc + c
    (b) y = a*sin(x) + b*cos(x) + cx);Especially I'm not sure how to format the sin and cos functions
    Thanks !

    jordan755 wrote:
    Im trying to work out the math functions into my program, but I'm not sure where is the mistake. This is what I have now:
    (a) y = ax^2 + bc + c
    (b) y = a*sin(x) + b*cos(x) + cx);
    Java != algebra.
    (a) says: Take the variable called 'ax', perform a bitwise XOR on its value with the number 2, add that result to the value of the variable 'bc', add that result to the variable 'c' and put the result in variable 'y'.
    (b) is trying to call sin() and cos() methods defined in the current class and add the to variable cx.
    In your other thread, you had variable names 'keyboard' and 'character'. Given that, why would you expect 'bc' to mean "b times c" rather than "variable named 'bc'"? If you want multiplication, you have to use the multiply operator, ***.
    If you want to call a method that's defined outside your current class, you have to use the class name or a reference to an object of that class. The methods sin and cos are defined in the Math class. I advise you to read their docs before using them.

  • Ipod Problem, not sure how to phrase.

    Yesterday, after I uploaded a song onto my Ipod, it was doing okay.. I play the song on my Ipod an hour later and it completely froze. I let the power on it go to zero then recharged it. Next day, I use it, seemed okay today... *holds down pause button to turn it off*, nothing happened. I then used the menu "sleep" button and that didn't work either. I restarted my Ipod and charged my Ipod... Later, I turned it on when it was fully charged, The song works, the sleep button works.. but what screen does the sleep button take me to? "Full Charged (battery under it). What should I do? Would deleting the song I uploaded onto my Ipod be the solution?
    Not Sure   Windows Vista  

    Ok let me rephrase. This is how it went.
    1. Ipod (Video) Froze
    What I did: Waited for power to die off then recharged
    2. Ipod wouldn't sleep.
    What I did: Restarted Ipod (Hold Select + Menu)
    3. Ipod would sleep, but in sleep mode, this is up:
    http://www.apple.com.pl/support/ipod101/anatomy/3/index_files/anatomy03-1.jpg
    But instead of saying "Charging" it just said "Charged". This is currently what is with my ipod, the ipod thinks that it is hooked up to a power supply when it is not.
    My problem is that I cannot make the "Charged" screen go away.

  • ACER AL1916W fuzzy font. Not sure how to fix it!

    Hey everyone,
    I recently re-attached my ACER AL1916W monitor to my Macbook and i seem to be having issues with the clarity. When I watch videos the quality is sound but smaller things like the fonts and the toolbar seem to have a shadow. It almost looks like a rippled water effect.
    If anyone has any troubleshooting solutions please let me know!
    Thanks a lot!

    If it's a VGA attachment, another thing to try is to Auto tune the monitor. There should be instructions with Acer on how to do this. Sometimes there is a shortcut, meaning a button labeled AUTO right on the front of the monitor.

  • Focus problems, not sure how to make focus work correctly

    I have a number of dialog boxes and wizards, and just before I call show I request focus for the component I want to be displayed, but nothing happens. I think the show method it JDialog is setting the focus, and that this is the problem.
    I want behavior to work as expected ie.focus to start at top left component and work its way down. Instead it seems to be giving fucos in the order the components were added, or soething like that. Does anyone know if this is indeed the case? I have many widgets which add components in the superclass, so this could cause me problems.
    I do not want to create a focus manager, but if worse comes to worse, I will - this is a problem that is unacceptable to the client.
    Any suggestions or comments?
    btw I am using 1.3.1 and win2k for the OS.

    Hi,
    addWindowListener(new java.awt.event.WindowAdapter() {
    public void windowActivated(java.awt.event.WindowEvent evt) {
    formWindowActivated(evt);
    protected void formWindowActivated(java.awt.event.WindowEvent evt) {
    // Add your handling code here:
    getFocusFor(yourFirstComp );
    private void getFocusFor(final JComponent comp ){
    SwingUtilities.invokeLater(new Runnable() {
              public void run() {
              comp.setRequestFocusEnabled( true );
              comp.requestFocus();
    }

  • HT5622 when I buy something in a game, it shows that your purchase could not be completed. I do not know how to deal with it.

    when i buy something in a game, it shows that your purchase could not be completed. why?

    Do you have a valid credit card link to your Apple ID?
    Some in-App purchases can only be bought using credit card.
    Read this
    http://support.apple.com/kb/HT4009

  • I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • TS3212 Having problems downloading. OS is LINEX and I'm not sure how to load itunes with it.

    Having problems downloading. OS is LINEX and I'm not sure how to load itunes with it.

    Agreed. No native linux support. The only ways you could run iTunes with a primary linux system would be to a) dual boot, b) virtualize Windows with VirtualBox, VMware, etc., or c) attempt to run iTunes in Wine (which doesn't usually work very well). Dual boot would give you the benefit of complete support and usage of hardware and software, but virtualizing is a bit more convenient, since you would not have to reboot your linux host.

  • Weird problem with ipod...not sure how to fix

    My ipod was filled to the max...like 950 songs and i couldnt fit anymore. i had it on set up mannually, but one day when i plugged it in to my computer it acted as if it was a new ipod and switched to "update automatically." Then it updated by deleting all my songs i didnt have saved onto the library before i could stop it. now ive reimported all my cds, but it will only hold 500 songs and says its full. They are all the same songs so it cant really be full. I'm not sure how to fix this. Please let me know if you know how to fix it. Thanks
      Windows XP  

    what is your iTunes import setting on?? check on the prefeances-advanced import tab and check that

  • How do I set up my airport express to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

    how do I set up my airport to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

    I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!

  • Re: SKYPE...I keep getting this & not sure how to resolve it..."Firefox doesn't know how to open this address, because the protocol (skype) isn't associated with any program."

    I am trying to set up skype on my dell desktop with Windows 7 and when I attempt to make a call I get this message...not sure how to correct it.Please help.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • How to deal with this problem while Flex Integration   SSH

    Error creating bean with name '_messageBroker': Instantiation of bean failed; nested exception is java.lang.NoClassDefFoundError: flex/messaging/AbstractFlexSessionProvider……
    Caused by: java.lang.ClassNotFoundException: flex.messaging.AbstractFlexSessionProvider
    I have  exist project used  SSH ,and now need flex to be use in some new unint.
    I hava follow these step to write my code , please help me to pickup the misstake  i had token.
    (flex4.0  spring 3.6 strust2.2 **)
    1. download the Blazeds file  and spring-flex-core-1.5.2.RELEASE.jar
    (org.springframework.integration-1.0.3.RELEASE.jar also include)
    2. unpack the Blazeds copy the flex folder to WEB-INF 
    3.add the lib/*  to my project lib folder
    4.add some declaration in the web.xml
    5.new a flex-application-config.xml 
    ^^^^ and so on.  I don't know how  to deal with this problem!!!
    Waitting for help!

    The information you provided is totally useless for determining the problem.
    If it helps, I think the message you are getting is related to BlazeDS not being able to find the service class you are calling. You either have a typo somewhere, or you didn't set up a secure channel in your service config (I am assuming you meant SSL and not SSH).

  • How to deal with this problem?

    How to deal with this problem?
    We plan to use Oracle Coherence (In Memory Data Grid) for a large-scale application. In order to keep the database table data in Coherence caches, we will create all the corresplonding Java objects (entities) and construct the persistence system using JPA/EclipseLink+JDBC. In this way, any in-memory object update will be persisted to the corresponding database tables.
    The problem is that some existing application codes are updating these database tables directly now. If the direct-database-table update is not permmited in the persistence environment, we have to discard most of the existing application scripts.
    I want to know, in this situation, should I discard most of the existing scripts?
    Are there any other solutions?

    Allowing writes from both cache & DB is possible with its own set of issues.
    The main issue to consider is conflicts from updates on same record via both cache and DB. If your caches are write-through the conflict decreases - but then cache writes become slower. If your caches are write-behind potentially the older cache update will overwrite the latest DB update. Now you are back to Database 101 -- timestamps, versions, etc...
    If you use a DB trigger to initiate the resync request you might want to distinguish whether the update has come from the cache-store (in which case, you may choose to do nothing), or if the update was from the 'existing apps', etc...
    If you choose to inject the resync logic at the application code level - you have the usual sourcecode issues - can you modify the code, is all the DB code localized, what options do you have to link with Coherence functionality (DLL, external proc, webservice, etc), etc... Naturally though, if you have to make substantial changes to signal a resync....you might consider taking the extra step and change the code to write to the cache.

  • How to deal with the rule that do not use "object" class to declear a class

    I run my flex project in sonar. And there is a rule "Do not use Object class ".
    I just want to know how to deal with this problem.
    I mean, when I try to write a base class, I don't know which kind of class will be transfered in by reference, which type I can declear instead of "object"?

    Check out this example:
    The moment I put in the code >> box1.addItem("hello"); << and run the application, the BusNameListener is fired. Hope this makes sense.
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.ActionListener;
    import java.awt.event.ActionEvent;
    public class JFrameExample {
    private JComboBox box1;
    public JFrameExample() {
    box1 = new JComboBox();
    box1 .setMinimumSize(new Dimension(300, 24));
    box1 .setPreferredSize(new Dimension(300, 24));
    box1.addActionListener(new BusNameListener());
    box1.addItem("hello");
    JFrame f = new JFrame("This is a test");
    f.setSize(400, 150);
    Container content = f.getContentPane();
    // content.setBackground(Color.white);
    content.setLayout(new FlowLayout());
    content.add(box1);
    f.setVisible(true);
    class BusNameListener implements ActionListener {
    public void actionPerformed(ActionEvent e) {
    JComboBox cb = (JComboBox) e.getSource();
    String item = (String) cb.getSelectedItem();
    if (item != null) {
    JOptionPane.showInputDialog(null,
    "Specify...", "File Import",
    JOptionPane.OK_CANCEL_OPTION);
    }

Maybe you are looking for