Font Rendering Issues-Help Required Please

In the past week, any Google search on Firefox or Chrome (but not Opera) gives me results where the fonts look gappy. Sometimes there are additional dots above the letters. I uninstalled and reinstalled Firefox from scratch in case an add-on was at fault but even with a clean install I am still seeing the issue. I checked my font settings and do not have any minimum font size set. I have allow pages to choose their own font ticked.
I've uploaded an image where I can see some correctly rendered text and some gappy looking text (not from a Google search but a Mozilla query). It also happens when commenting online sometimes, during typing it will be gappy but it will show properly once submitted. Any ideas for a fix would be warmly welcomed and I can give more examples if that would help. Although it's not Firefox related, I did restore all defaults in Chrome and it didn't fix the issue there either.
I uninstalled the most recent Windows Update since the problem is recent but it didn't change anything. I'm not sure if browsers would even look to my computers fonts.

hi Auds77, this is probably caused by microsoft update kb3013455 which can cause font rendering issues on vista:
<blockquote>After you install security update 3013455, you may notice some text quality degradation in certain scenarios. The problem only occurs on systems that are running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available. </blockquote>
<sup>reference: https://support.microsoft.com/kb/3013455</sup>
one option may be to [http://windows.microsoft.com/en-us/windows/remove-update#1TC=windows-vista roll-back this particular update] for now until there is a fix by microsoft or you could also look if there is a [[Upgrade your graphics drivers to use hardware acceleration and WebGL|graphics driver update]] available on the website of the vendor (intel/amd/nvidia) which might also resolve this problem in some cases.

Similar Messages

Font rendering issue & multimedia keys not working

Hi, yesterday i switched to KDEmod 4.1 and I have two major problems...
One is font rendering issue... I did not change anything in my font-related packages (cairo, freetype, fontconfig, libxft) and i have to add that this setup worked perfectly in KDEmod 3.5.9, but now it looks like this:
This bug occurs only in qt apps and mostly in kmenu... i.e firefox renders my fonts flawlessly...
Second problem are multimedia keys on my keyboard...
They worked in KDE 3.5.9, but now I cannot set them up properly... Sometimes they work, sometimes they don't...
KDE recognizes the pressed key, but when I assign specific action and press the key, just nothing happens...

You might be able to solve your font issue by going to System Settings -> Appearance -> Fonts. I enable ant-aliasing. I also clicked on configure and select "Use sub-pixel rendering" to RGB and the hinting style to Full. I also use the Force fonts DPI to 96 DPI. This makes the fonts pleasing to my eyes.
This is how I got my multimedia keys to work in KDE4.1:
Go to System Settings -> Regional and Language and make sure to set the County or region to your location.
khotkeys needs to be running. I added it to the autostarted progam list. System Settings -> Advanced tab -> Autostart
When I got the multimedia keys working, I was really tring to get the keyboard shortcuts to work. In addition to the above steps, I also deleted
~/.kde4/share/config/kglobalshortcutsrc. I do not know if deleting this file is needed to get the multimedia keys working, but it was to get the keyboard shortcuts woring.
Restart X
Go to System Settings -> Keyboard and Mouse -> Keyboard Shortcuts
I set the volume control in the KMix component section.
To get the keyboard shortcuts to work, go to the menu editor and select the program you want to create a shortcuts for. Click on the advanced tab and create the shortcut in the shortcut field. Save.
Then go to System Settings -> Keyboard and Mouse -> Keyboard Shortcuts. Change the component to KHotkeys. Select the Program and then select the default shortcut that you just created. (This works for the multimedia keys aswell).
Hope this helps,
pudge

Security Update Issues Solutions Required Please :)

I've been having issues since the latest security update for OS 1.5.8. I want to restore my system to a Time Capsule backup but my OSX install disks are for 1.4 and don't have the option to restore from backup, as far as I can see...Help?

hi Auds77, this is probably caused by microsoft update kb3013455 which can cause font rendering issues on vista:
<blockquote>After you install security update 3013455, you may notice some text quality degradation in certain scenarios. The problem only occurs on systems that are running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available. </blockquote>
<sup>reference: https://support.microsoft.com/kb/3013455</sup>
one option may be to [http://windows.microsoft.com/en-us/windows/remove-update#1TC=windows-vista roll-back this particular update] for now until there is a fix by microsoft or you could also look if there is a [[Upgrade your graphics drivers to use hardware acceleration and WebGL|graphics driver update]] available on the website of the vendor (intel/amd/nvidia) which might also resolve this problem in some cases.

Font rendering issue / Mountain Lion / non Apple LCD display

Hello
This font rendering issue or problem is probably well know by Apple crew too but nobody has solved it yet. Only poor solution are available such as try to adjust manually font rendering by writin some scripts concerning anti alias levels...they really dont solve the problem.
Could Apple bring us solution to this by developing or updating Mountain Lion?
So what is the problem: font rendering is very poor in Mountain Lion when using non Apple LCD. For example Fujitsu SL27T-1 LED (LCD displa) shows fonts very nice way in Windows but in Mac OS ML does not. Somebody told me that its about software vs. hardware rendering. Dont know about that but could you bring me the solution which is not advising me to buy Apple display (which is five times more expensive than other manufactures displays).
Br
M. Leino

just want to add that overall fonts look blurry and they are not very sharp.

Can anyone make --this fix-- work for the FONT rendering issue?

I found this bug report and proposed fix on the webkit buglist:
http://bugs.webkit.org/show_bug.cgi?id=14070
Here is a link that one says can be used to fix the
rendering issue with bold fonts.
If anyone can make this work for Safari 3 on XP please let me know....
Here are the text and link to the how to:
You can fix rendering issues by changing language for non-Unicode programs. The
instruction:
http://www.microsoft.com/globaldev/handson/user/xpintlsupp.mspx#EVE
You should restart system after applying setting.
Hope this helps someone
If not, then call apple support and complain....
maybe if their support phones are getting hot... then they
will fix this horrible bug

I don't believe this is a support issue, it's rather a Bugdev issue. Use the Bug-Report field in Safari to report this directly to the engineers. I also think the bug is known and will be solved, it's therefore not really in the range of AppleCare. (Beta Software is usually unsupported!)
MacBook Pro, MacBook, ModBook, iMac, Mac mini, PowerMac G5, iBook, Apple TV Mac OS X (10.4.9)

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description:    PC
IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask:    255.255.255.255
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:    10.143.147.147
        10.143.147.148
Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description:    Broadcom 43225 802.11b/g/n
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:    PC
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number:    85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

Weird Font Rendering Issue?

Okay i was looking fo some back up drives online, and i stumbled upon:
http://www.circuitcity.com/ssm/Seagate-Barracuda-7200-9-500GB-Internal-Drive-ST3 500641ARK/sem/rpsm/oid/168899/catOid/-12976/rpem/ccd/productDetail.do
it renders like this:
http://img512.imageshack.us/img512/4641/picture3rn0.png
http://img218.imageshack.us/my.php?image=picture4dr1.png
but for some reason on my MacPro 2.66 the font renders odd in FireFox (doenst do it on Safari. and ive tried this exact sit eon my MacBookPro and it looks fine on Firefox.
I have the following installed (on both machines)
-FireFox 2.0.0.9
-Microsoft Office 2004
-Adobe CS2
-Macromedia Studio 8
theyre practically identical with programs & fonts installed, the only fonts that are installe are the ones that wer epreinstalled with the system, and that came with Office 04 and CS2
any way to maybe fix this issue?

hey! well i tried your site url on my MacPro and i have the same issue, so it must be a macpro thing? lol
im running the latest firefox and no additional fonts installed other than the ones you have listed yourself (office, cs2, macromedia)
so dont fret. i tried using font finangler and onyx to clean the font cache, (not sure i fhtat was a good idea,) but it shows up on mine so your not the only one! ive tried on two different macpros one wiht out any programs and it does the same thing. so it must be something with the wya its rendering on these machines.
at first it hought maybe something got corrupted in my system aswell
hope that helps!!

Font rendering issue: Win7+Cp5.5 vs. XP+Cp4

Hello all, here's the issue: font rendering when publishing under XP is perfect, crisp, and sharp, while on Win 7 looks blurry...
I tried different versions of Captivate, different fonts, font settings, enabling/disabling cleartype. Nothing works and I'm really desperate to get old XP crisp look. Anyone experienced that? Any ideas? Thanks in advance for sharing.

The Windows 7 version is definitely anti-aliased while the Xp version is not.
In Win 7, right click on the desktop, and select Screen Resolution.
Click the link to Make Text and Other Items Larger or Smaller.
Make sure it is set to Smaller - 100% (default).
Click the link in the left navigation panel to Adjust ClearType Text.
Tick the box to turn on ClearType.
Does that help?

Font rendering issue in Windows 7 with Aero

I'm running Windows 7 Home Premium 64-bit, and using Firefox 19.0.2. Aero is enabled, but the ClearType font smoothing is turned off.
At completely random intervals, text is rendered like this in Firefox:
http://i49.tinypic.com/vgshv4.png
Sometimes it can be fixed as simply as hovering the mouse pointer over the affected parts. Sometimes I have to mark the text to get it rendered correctly, and sometimes it can be fixed by scrolling the page.
It can happen on any sites with any encoding, regardless of the font size and color, but I noticed it's extremely rarely happens with Japanese text. It never affects the whole page, only random parts of the on-screen text, and sometimes the interface text as well. Also worth mentioning that it never happens when Aero is turned off.
Is this a Firefox bug, or is something wrong with my system? Thanks in advance.

I had the same issue, uninstalling windows update kb2670838 fixed it for me. See also:
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/text-rendering-issues-in-firefox-after-installing/1aaefaec-ba47-4577-82c3-44b72a50049b

HT4859 Hi - help required please. My kids have locked my iPad and now I need to sync to my computer xcept am on hols and don't have it. Any options? Thanks Darren

Hi there
Hope someone can help me here. I am currently on holidays and my
Kids have disabled my iPad so I now have to sync with my computer.
I don't have my computer handy and want to use my device over the next few weeks
if possible so can anyone help me please
Thanks
Darren

You will have to use a third party utility to extract your iPad and iPhone's music.
Read turingtest2's User Tip:
https://discussions.apple.com/docs/DOC-3991

WRT160n speed issue, tech help required please

I'm puzzled. I have a WRT160nV2 just recently purchased. I just noticed that my desktop, which is using a WMP300N-UK, running under WinXP SP3, is connecting to the standard channel as listed in the router's status screen, rather than the wide channel. The Linksys icon in the XP desktop system tray reports signal strength 90% speed 48Mbps. How do I improve on this? (The network is mixed, with other 802.11g devices connected, and is secured with WEP 64-bit hex)

In the router, make sure your Radio Band is set to "wide channel".
Also, some wireless adapters have had difficulty doing WEP at speeds above 54 Mbps. I don't know if the WMP300N has this problem or not, but you might want to try using WPA (= WPA with TKIP), or WPA2 (= WPA with AES) encryption. Ideally, you should be using WPA2, or at least WPA encryption anyway. WEP is not longer recommended because it is too easy to crack, even with a 64 bit hex key.
Also, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
If you still have trouble, download and install the latest driver for your WMP300N.
Hope this helps.

Font Rendering issues in export to PDF-SSRS

Hi,
Its a very strange issue,I am facing from last two days.
I have created a report having text with Gill Sans MT font.I am able to see the text in the mentioned font properly on report server as well as on my development machine.
Issue occurs when I export the report to PDF, as when i open the report in acrobat reader to view the font of the rendered text,it shows the font as Gill#20Sans#20MT which causes the text rendering up in Arial(default font).
If I Export from Word document the font is set as GillSansMT i.e name without spaces and text is rendered in correct font.I have installed the required font on both the locations i.e. report server as well as Development environment.
Thanks & Regards,
AS

Hi Anand Sardesai,
Since the Gill Sans MT font is not been installed on the production server at first. Please make sure the font is installed correctly and that font embedding is granted font. If the referenced font is not installed on the report server, the resulting PDF
file might not contain the correct mappings and might not display correctly when viewed.
Reference:
http://technet.microsoft.com/en-us/library/ms159713(SQL.100).aspx
Alternatively, I recommend you reboot the server try to resolve the issue. There is a similar issue for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6a6cc993-e5bc-4919-9a27-d0b177402c6f/ssrs-r2-font-not-persisting-when-exporting-to-pdf
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

[solved] Pango font rendering issues

I'm having issues with pango rendering of pcf fonts. I was trying to set up a new font for my awesome theme, but my choices are fairly limited because all the pcf fonts are rendered as some default font. So then I was going around googling the issue, and font that awesome renders fonts using pango. I then tried to use pango-view to view the pcf files, and it displayed the same default font. These fonts show up fine in xfontsel and they render properly in urxvt. In my googling I found someone on slackware was facing a similar issue back in 2010, but no solution was posted. Is this a known/common problem, and does anyone know a fix?
Edit: I'm not sure if this matters, but I also have freetype2-infinality installed from the AUR.
Last edited by HalfEmptyHero (2011-12-22 13:10:13)

Wow, I can't believe it was that simple. I had read my fontsconfig rules, however I'm new playing with fonts so none of it really meant anything to me when I originally read it, and I simply changed a few of the default fonts.. Going back over it now, it makes a lot more sense. Thanks for the help.

Maximum number of items reached in FI--help required please

Hi,
How to avoid the situation(error)
Po raised for some 300 line items.
PO consists of 3-4 header conditions and all the conditions are linked to a differrent GL account all together.
GR to be done against PO.
System fails to post the document because of the error 'max no of items reached in FI(since counter limit for accounting document lines is 999).
This is most likey to happen frequently in my requirement since the POs are often consisting of 200-300 line items and alsmost 2-3 conditions minimum.
In addition to that we have thought of going for purchase account management which means that effectively 2 more additional postings in GR.
So all in all for every line in PO there could be atleast 6-8 accounting entries getting generated at the time of MIGO or any goods movement.
This very commonly happens in Sales issues also and in Invoicng also.
I have raised this issue earlier also but could not got any concrete answer.
Many suggested to go in for split GR but how far that is advicable.
There is summerization option but I am really not getting any que out of some notes I read and some forum postings I read.
Can anyone suggest me a simple step by step approach for achieving this and basically how it works and would be helpful for me.
I repeat and request you all to help me in this.If someone has already done this then please share the knowledge.
Regards,
arjman

Hi,
The issue what you mentioned is really a very painful and most complex one which we are also researching. OSS suggested a OSS note and it didn't work. Yes, as you said, we have that issue in MIRO for now....I am afraid, it would comeup in MIGO as well, then, I will have no sleep, for sure....suprizingly, OSS is working very slow on this issue to my surprize. The OSS note doesn't clearly specify what to and how to summarize. We have different issues in MIRO....one for number of tax lines exceeding 500 lines...and GR/IR lines exceeding on another end...we thought if we can't fix tax lines, at least we can work on GR/IR lines but neither one is successful....We have this issue in ECC 5 for the past 3 months...with real good expert in each functional space in the team, we couldn't fix it yet!!!
just FYI

Font rendering issues

Hi,
I am having problems with fonts. Every so often, pieces of letters don't seem to load correctly. Eg, this boot, the letter c in my default font is missing it's battom half. This happens across different applications. (the bottom of the letter 'c' is missing in both Firefox and in Thunar. Different letters are effected on different boots. This affects multiple fonts (I use DeJaVu Sans in Firefox and thunar, but I have the same issues in Sakura (using the Terminus font).
Here is a screenshot:
http://img145.imageshack.us/i/fontih.png
Any help would be appreciated.
Thanks,
Joshua Scott.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Hi Anand Sardesai,
Since the Gill Sans MT font is not been installed on the production server at first. Please make sure the font is installed correctly and that font embedding is granted font. If the referenced font is not installed on the report server, the resulting PDF
file might not contain the correct mappings and might not display correctly when viewed.
Reference:
http://technet.microsoft.com/en-us/library/ms159713(SQL.100).aspx
Alternatively, I recommend you reboot the server try to resolve the issue. There is a similar issue for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6a6cc993-e5bc-4919-9a27-d0b177402c6f/ssrs-r2-font-not-persisting-when-exporting-to-pdf
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Font Rendering Issues-Help Required Please

Similar Messages

Maybe you are looking for