Font shown even after all fonts were converted to outlines

For a recent print run my printer asked me to convert all text to outlines. I did this and now when I go to Type > Find Font it does not show any fonts for the document as expected. However when I export this to a print ready PDF, and then see the PDF properties from Adobe Reader it still lists the Helvetica font. I can’t seem to figure out what is going wrong here. Can anyone please help? I’m using InDesign CS5.5.

@hpb1980 – maybe you included some information outside the page's bleed area? Like one or some of the printing marks. To test that, export a blank page with the same settings and see, if Helvetica is embedded…
Uwe

Similar Messages

HT201412 even after all night of charging my ipod touch is running out of battery whithin 5 minutes of it being on, why is this?

even after all night of charging my ipod touch is running out of battery whithin 5 minutes of it being on, why is this?

Try the following to rule out a software problem.:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still that short of life ake an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Execution does not end even after all records updated..

Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...

Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang.

What problems or issues do i have if even after all the steps i took to fix my problem with the ipod classic and even after i restore it it fails to be recognized by itunes

even after i restore my ipod it fails to be recognized on my itunes and doenst allow me to format it. been through all the trouble shooting steps and disk mode an still wont work properly plz help someone

I need my phone not only because it it my alarm clock in the morning, but because i use it excessively at work. PLEASE HELP !

My portal DAD is down even after all correct properties are set.

Hi,
could any one update my question why the DAD is down (checked from OEM console) even after the properties set are correct? is there a way to troubleshoot it? I would be thankfull if I could get the answer/How to trouble shoot it?
Thanks,
Vijay.

Looks like you are referring to an earlier post -- if so, which?
You can check the error_log files from the HTTP Server in $OH/Apache/Apache/logs for information as to why the connection to Portal could not be opened.
This should give information as seen from mod_plsql, such as login issues to the database, or problems resolving the service name.

Mac mini won't boot up on OSX even after all keyboard commands and shortcuts.

Hi. I installed windows 7 using bootcamp on my mac. Windows installed successfully but I had to reformat its designated partition to NTFS (20GB which I allocated). But now I can't seem to run OSX even after doing Cmd. R, Option, C, etc. still Windows boot everytime. Anyone know how I can fix this problem before I submit the computer for professional service? Thanks.

Usually means you may have also formatted your OS X partition or RDB with the Windows formatter. You might try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the above doesn't help any then you are looking at having to reformat your OS X partition.

PDF still not converting even after all advice from forum

Hello, I am trying to convert a PDF using Adobe Export PDF, the file is 8.6mb, when I click to convert it says "file failed to convert using Adobe Export PDF online" I tried disabling recognised text, still didn't work. Followed the link to the ExportPDF web interface, it says export complete so I save, however when you click it says 'internet explorer has stopped working' and it closes the programme. It says in Properties- Applications...and then it's blank. After PDF producer it says Acrobat Distiller 7.0 (windows) . I have comverted 7 other files in the same series, some of which are bigger, however there is just won't convert. Please help....

Hi Sean,
Sorry to hear you're having trouble!
Could you try the steps outlined in this document: http://forums.adobe.com/docs/DOC-1831 ?
After going through those steps, try converting from the ExportPDF web interface again.
Let us know how it goes!
-David

Brought forward shown, even after end-page-total

Hello,
I am using carry-forward and brought-forward as suggested in the user guide.
Tag 1:
<xdofo:inline-total display-condition="exceptfirst" name="InvAmt">brought forward:</xdofo:inline-total>
Tag 2:
<xdofo:inline-total display-condition="exceptfirst" name="InvAmt">
<xdofo:show-brought-forward name="InvAmt" format="99G999G990D00"/>
</xdofo:inline-total>
Tag 3:
<?end-page-total:InvAmt?>
after end-page-total, I have about 3 pages with additional text. while carry-forward is shown correctly only on the nessasary pages, the brought-forward is finaly shown on all text pages behind the end-page-total.
is this a bug, or what is my mistake?

Hi Tim,
yes, the brought-forward is shown on every page, except the first
but no, this is not correct!
I have the following layout for my invoice:
Page 1) cover letter and start of the invoice-article-list
Page 2 - X) if needed, repeating invoice-article-list
Page X + 1) additinal information, payment terms, shipping conditions, attached text, sometimes general conditions, may be more than one page
at the end of the invoice-article-list, i have the "end-page-total" tag.
beginning from the page containing this tag (Page X), the carry forward (at the bottom of the page) is not printed any more ("except last") even it is not the last page in total. -> behavoir is correct.
But the brought-forward with "except first" is shown on all additional pages after X. But the article list is finished, no brought forward needed any longer. -> behavoir not wanted
is that understandable or should I send you an email with my layout and an example xml?
best regards
Alexander

BPM status is "IN Process" even after all the steps in BPM are completed

Hi All,
we have designed a BPM for collection of messages and have a transform step .
In some cases all the steps in BPM get completed but the status of BPM is still in" In Process" and in SWWL transaction the status is "Started".
Even though the status is started we are able to get the desired output.
Ideally after the steps in BPM get completed the status should be "Completed".
please suggest why we are getting this status and how can this be resolved.
Thanks and Regards,
Rajesh

hi ,
I am using a fork and loop with a condition to end this loop.the condition gets satsfied.
The messages are coming out of the loop and fork but even then the status is in "InProcess"
thanks,
Rajesh

Won't load Yahoo even after all virus checks - no virus detected

Mozilla will not load Yahoo.com page. Performed all the virus checks as suggested. Have no virus, malware etc. Running Windows 7 Pro.
Ran SuperAnti spyware, Adaware, Malwarbytes, spybot, Norton full system check, Avast full system.
Nothing came up except a few tracking cookies that were deleted.
I have been using Mozilla to avoid the troubles of IE for year now to run across this and have not been able to solve the issue. Any ideas?

There are a number of others here having the same problem (including me), where the project appears in Finder in the iMovie Projects folder but is not listed in the Project Library in iMovie. The project just seems to disappear from the Library.
Here is a link to a recent topic. It includes a post by me where I've provided links to other topics regarding this issue.
https://discussions.apple.com/message/21296973?ac_cid=tw123456#21296973
You've given an excellent summary of things you've tried. I've also tried most of those, but haven't as yet reinstalled iMovie. As I have Final Cut Pro X, I also attempted to open the project file in that app with no success. FCP X crashed just after loading, after I had selected from the menu - File > Import > iMovie Project.
You can submit feedback to Apple - from iMovie's Menu select iMovie > Provide iMovie Feedback.
Sorry I can't help you solve this.
John

PO approval Email not visible in SOST even after all settings intact

Hello All,
The 'PO requiring approval ' email is not visible in SAP since 10.11.2010.
The user decision task which sends a notification to approver regarding the approval has been going successfully for two yrs and now suddenly since 10 Nov 2010, it stopped. The workflow log does not show any error. Also the settings in SWN_CONFIG have not changed since 2008. The approvers have their correct email Ids set in SU01. Even the jobs 'SWNSELSEN' and 'SAPCONNECT' are scheduled and running successfully and sending emails for all other sap notifications.
Suddenly they have stopped sending notifications for this particular issue.
Please help me, where to look for. Are there any services involved other than these settings.
Awaiting eagerly for the solution.
Neha

Hi Neha,
How you are sending mails for dialog workitem?
Are you using the email send step inside the workflow or you using the batchjob to send the mails (send task description as mail via batchjob).
Id using the batchjob check the that task is present in the selection criteria.
(report to send mail is RSWUWFML)
-Swapnil.
Edited by: Swapnil Pawar on Nov 18, 2010 9:03 AM

Ipad memory full of photos even after all photos deleted

Hi,
My daughters ipad is saying it is full of photos 10.24gb on a 16gb ipad.
I deleted all photos out of photo roll and used space went up a little!!!!!!!
i deleted all 3rd party apps not change!!!!
Restored ipad and reinstalled back up,problem still there.
i've read lots of post's about loading and deleting photos from pc but thats not worked either!!
could all the photos from instagram/message apps be hiding some where?
also a setting for HDR photo was set to save normal as well as HDR, so could these be hiding some where..
all help welcome as ipad is useless now as it say there is no space left on it to do anything really
Many thanks from me and my daughter

I deleted all photos out of photo roll and used space went up a little!!!!!!!
Did you remember to empty the Trash? All deleted photos will be saved for 30 days in the "recently deleted" album. To delete the photo or video permanently before the days expire, select them in the Recently deleted album, tap the item, tap Delete, then tap Delete Photo or Delete Video.

Firefox crashes when opened even after all tips here applied

Have tried it all and as soon as I put home page different than default one firefox crashes at start unless in safe mode

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Can you start Firefox in Safe mode?
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

HT6030 Apple Mail setup Issues. I have issues trying to use apple mail even after all updates and fixes. What else can i do to try and use it?

Does Anybody have issues setting up the mail accounts in apple Mail. I am trying to set up Google mail accounts and icloud account with no luck. All recent updates is done and still it does not setup. I have re-installed the OSX and still no luck.when it does accept the passwords it does not appear in the mail application so i can still not send and receive!!!!! PLEASE any help will be appreciated.

Have you Enabled Two Step Verification Recently with Gmail?

Safari will not open even after all steps

I tried to follow Mary's instructions. I uninstalled safari and removed application support folder. I downloaded safarisetup.exe and restarted my computer. I then unconnected from intrnet and all networks. When I launch safarisetup.exe it asks for safari installer safari.msi which is no where to be found. I need help. BTW - I downloaded install for safari only.
Please help.
Thanks,

... okay ...
I'd like to try an experiment. It's not a cure in itself for the issue but it might point us towards a cure.
Here's the experiment.
Head into your User accounts control panel and create a new user account with full administrative rights.
Log out of your usual user account, and log into the new user account. Now, try to launch Safari in the new user account. Does IE try to launch it, or does Safari open properly?
(Here's what I'm thinking ... in the Safari Develop menu, there's an option to open a web page with a different web browser (from inside Safari). I'm wondering if something ... ghastly ... has happened to your Safari preferences and settings files, resulting in that option being "stuck" on, so that IE always launches when you try to launch Safari. If that's what is causing the weird behavior in your usual user account, Safari should open properly in the new user account because there's a different set of Safari preferences and settings files in each different XP user account.)

Font shown even after all fonts were converted to outlines

Similar Messages

Maybe you are looking for