Font shows in Pages, but no where else

When in Pages with a new blank document open, I can look at the Font List (or click on the Fonts button which opens the font box) and see a font called "Jolt." If I use that font, there are a few unusual characters in the document and because of this I don't think it is useable. I'd like to get rid of it from the Pages list.
This font is not available in any other program, such as Mail, Numbers, or even Font Book.
Where is this font located? How can I get rid of it from the Pages Font (drop down) list and Fonts box?
I have a program called TinkerTool System, and I used it to clear the font cache, but it is still there.
Any ideas? Thanks!
Linda

Automatic font activation was checked and Ask me before activating was unchecked.
I unchecked Automatic font activation and will try that.
In the meantime, I did a search and found two documents (originally from my laptop -Vista) that had that font in them. So I deleted the one I didn't want, then turned off the drive, then when I opened the file in Pages, it asked me to replace the missing font so I did. Then I saved the document. Then I rebooted and turned the drive back on. Pages no longer showed the font.
Hopefully, unchecking Automatic font activation will prohibit this behavior in the future. Because, I'm new to MAC...migrated over from PC, so I have lots of Word documents to deal with!
Thank you very much!

Similar Messages

  • I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

    I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

    Hi,
    You may open the original form in FormsCentral and toggle to “Page View” at the lower right corner. Adjust the page content to make sure no page breaks in this view.
    Thanks,
    Wenlan

  • It's been 4 days now my App Store show 2 message it means that I have to update some applications but every time I open my App Store and press update it only shows blank page but if I press genius, top charts, featured, search I can browse them

    It's been 4 days now my App Store show 2 message it means that I have to update some applications but every time I open my App Store and press update it only shows blank page but if I press genius, top charts, featured, search I can browse them

    It's been 4 days now my App Store show 2 message it means that I have to update some applications but every time I open my App Store and press update it only shows blank page but if I press genius, top charts, featured, search I can browse them

  • When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?

    When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?

    Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.

  • Song in ipod file but no where else

    so i got my ipod to work on my new computer and the ipod file with all the songs in it is there, but now theres no file to put the songs in. (im not good at explaineing things but ill try to make this as clear as posible) you know how when your in itunes theres a bunch of files on the left side of the screen (like 90's music, top rated ect...) well i have all my songs in the ipod folder but not anywhere else. is there any way to copy them out of the ipod folder and put them into one of those other floders on the side (like the top rated file?) i hope you were able to understand that... thanks for any help

    I tried it myself, I plugged in my iPod and looked at the folder, tried to drag songs out of there into other folders...except I don't have those folders LOL. Ok, I see the songs look grayed out, can't click, can't drag. Hmmm...is it really important that you place these songs into other folders? I mean, if your songs play fine then why need folders?? Try this, where you see the iPod folder right click on it and go down to "iPod Options". A window will open with tabs on top, click "Advanced". Where it says "Copy files to iTunes music folder when added to the library", is there a check on that box?

  • Burned CD's Only Play on iTunes, but No Where Else

    When burning cd's in iTunes on CD-R blank cd's, the disc will burn perfectly, but when I go to play the burned CD somewhere other than iTunes the songs will not play and the CD player will read it as a blank disc. How can I fix this???!!!???

    Help! I have the same problem too! i just burned a cd, put it in the hi-fi and it says "no disc" and "disc error". am using cd-rw. someone please help!

  • Small window appears in Mission Control but no where else...

    I'm not sure if I should be concerned or not, but I couldn't figure out what was going on so I figured it was worth posting. For some reason, I just noticed that when I enter mission control it looks like there's a small white window open in Desktop 1, but there are no applications running or anything and nothing is visible when Desktop 1 is active.
    I've attached a screenshot. If anyone knows why this is happening or if I should be concerned, please chime in. Thanks

    It's caused by Drobo Dashboard's menu item.

  • After apply SAP_HR SP 35-48 we have customization in 000 no where else

    How do most people handle this customization - Do they run comparisons with scu0 and make the changes then.  Do people somehow through the spau or transport system automatically apply all configuration changes to their environment during the installation?  This is our first year end on SAP and we are having a difficult time wrapping our heads around this.  I would appreciate any input anyone might have.
    This all came about when during testing our HR configurator was verifying a view change in V_T509F from snote 1304095 that was suppose to have gone in with SAPKE60041.  We did find the change in client 000 but no where else.  So being the newbies that we are we started doing research to find out what else might be out there in client 000 that needs to be looked at and copied up if needed.  We plan to use the scu0 comparison tool but it seems like this method will be very time intensive.  So we are interested in learning how others are handling this issue.  thanks in advance!!!!

    Hi
    When SAP notes or support packs are applied, by default they are made in client 000. Client independent changes are automatically available in all client,s however, client dependent changes need to be specifically copied over.
    In my experience, the whole thing has always been taken care of by Basis people and I believe they follow the following approach.
    Import Support Packs into Client 000. Save in Transport request, SCC1 into all applicable clients, Carry Out SPAU/SPDD analysis and fix all identified issues. Then it is released for testing etc.
    As a functional consultant, By and large I should be aware of critical changes impacting my implementation before hand, by analysing all the notes contained in the Support Packs of interest, and I will be on the look out for such stuff which has not been copied over from 000. Ideally they will be reveealed in my earliest tests and I will chase up basis for them. Before the plan for HRSP is finalised, there will be an impact analysys duration during which the Basis consultant and the Functional consultant analyse all the target HRSps and arrive at a pretty good idea of what is likely to be impacted.
    Copying all the configu changes over is definitely time intensive, you could try a targetted approach by identifying only those chnage that are relevant for you and copying them over from client 000. The time invested in this exercise, is unfortunately unavoidable.
    I hope the above helps. Also perhaps if there is a BASIS forum can post this there as well?

  • Anyone have an issue where a font shows in the font list in Photoshop/Illustrator but not in Flash?

    Anyone have an issue where a font shows in the font list in Photoshop/Illustrator but not in Flash?
    I'm not 100% sure but i may have had flash open when installing, i then uninstalled the font and then reinstalled the font. I even tried going from an OTF font to a TTF font.
    No luck.
    Do I need to do some sort of font cache clearing?
    -Line
    I'm using Adobe CS6 Flash, Photoshop and Illustrator on MAC OSX

    Yes. It's rare, but some fonts do not play well with Flash. Flash seems to have a more strict method of evaluating a font that can be imported. This is, in my opinion, probably because Flash needs to create a faux version of a font when it is imported. There may be some information that is either missing or not acceptable to Flash in a particular font and so Flash won't allow it to be used - even if you're not going to import that font.

  • I am using my first apple product, mac book pro.  somehow i FIGURED OUT HOW TO INCREASE THE FONT FOR SEARCHES AND WEB PAGES, BUT THE FONT IS TOO BIG AND FOR THE LIFE OF ME I CAN NOT FIND WHERE TO GET THE SCREEN BACK TO NORMAL, HELP ANYONE?

    I am new to Apple, somehow I figured out how to make font of Web pages bigger, but it is too big and I can't use sites properly.  for the life of me I can not how to get my font size reduced.  Help anyone? thank you, sbb

    Probably command-minus will do the trick.

  • I have downloaded 2 movies from itunes to my ipad, but they are not showing up on itunes.  where are they?  how can i find them?

    I have downloaded 2 movies from itunes to my ipad 2, but they are not showing up in itunes.  where can i find them?

    Tap the Videos app and tap the movies button at the top of the page.
    The iTunes app on your iPad is just a conduit to the iTunes Store.  To play your purchases, use the iPod app or the Videos app.

  • TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

    Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

    Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
    By the way, it might help if you indicated where you are located.
    To complain to Apple use http://www.apple.com/feedback/ipad.html

  • Ever since downloading and opening Firefox 4 beta, when I try to launch 3.6.8, I get an error message saying that Firefox is already running; it is not. I have removed 4.0 beta from the computer, but don't know where else to look for any bits and pieces.

    I need to restart the computer in order to launch FF 3.6.8. Also, in Dreamweaver CS5, I have defined FF 3.6.8 as my default browser, but when I try to view a page in FF, I get the same message that FF is already running. Where else do I need to look to find hidden files that are causing this?

    Did you uninstall the Firefox 4.0 beta version ?
    If you did then did you remove the personal data or otherwise removed to Firefox profile folder ?
    Make sure that you still have a (default) Firefox profile folder.<br />
    See http://kb.mozillazine.org/Recovering_a_missing_profile

  • TS1559 My iPhone 4s shows does connect to my wifi router but then after a while it shows still connected but does not open a page. I have to turn wifi off and on again to get the job done. it is annoying.

    I am using iPhone 4s. I can connect to my home wifi network but it works briefly, then whilr it shows connected with good signal strength, but I can not open a page in safari. I have to turn off the wifi and turn it on again for connection. This goes on and on. Very annoying. Please can anyone solve this problem?

    Hi ,
    thx for the feedback,to clarify my question :
    1-i am able to connect to any wifi network in airports, public places , my home , office , etc.o to get in is no problem.
    2-I can also log in into a specific website eg: was in Paris 2 days ago and could log in into the portal of a wifi provider.
    3-But when i have to log in providing an e-mail address or other info , i get into a loop where i can not get into the next page but i do get always redirected to the page asking all the info.
    This is not only at an airport , i do have it also with my own internet service provider , even if i want to log in from my home into their webmail site i get into this loop where after putting in all the inlog data i get that same page back every time.( i can get mail through my normal mailbox , no problems here)
    I do have indeed OS 6 and it is an iPad 2.I do not have the problem with an iPhone 4 S when i use wifi and here i also do have os 6 !!

  • Page shows in iweb, shows on idisk, but doesn't show on page?

    I just spent an hour talking with mobile me folks then about 30 minutes talking to a nice fellow with apple care to help with iweb.
    I have a movies tab on my web page where I have a lot of family movies. When I create these pages, I'll have a movie highlighted in the iweb app, click "add page" at the bottom, select movie, and it shows up in the drop down list of movies. (The guy on the call said he didn't know how to access drop down menus as he didn't have them on his version. That was weird to me.) This movie will publish, show as blue, will show in idisk, I can "visit" using idisk and it looks like my web page, but it will not show to other users if they go straight to my website (or me either).
    But, then I tried dragging the actual movie to the "movies" tab inside of the iweb app instead of first creating a page...this time it published.
    I tried some test pages with my old way of making movies (since this was post snow leopard I thought it may be related), and that worked. But if I took my blank page and added this one movie (a movie i renamed to see if that was it), it "hid" the page to the user even though it was on idisk. The only way to publish it is to drag the file to the "movies" view, if that makes sense.
    Just wondering if anyone knew about why this would happen. Also sharing my experience to help others avoid it if it comes up.

    never understood what happened but the pages eventually updated correctly

Maybe you are looking for