Font size changes between Export and Import

Captivate v5.5
My office in Germany is translating existing project from English to German.
They export a slide from v5.5 to be translated (in Word)...make the required translation and then import it back into Captivate v5.5
Problem is the original font size when exported is Tahoma Regular 11 but when the translated document is imported it arrives back in Captivate as Tahoma Regular 10.
The font size during and after the translation is Tahoma Regular 11. The change to size 10 is happening during the import into Captivate v5.5
Any ideas why and how to make sure the font keeps the same size (11 in this case) when imported ?
Noel

Auto Rescale Captions in the CP - file
I always turn it off by default, but turn it on when having to import translated captions:
Lilybiri

Similar Messages

Font Size Difference between Exe and Labview IDE

I'm stumped on the following issue and surprizinglycan't find any references that are similar on this forum.
I've developed an application which, when built to an Exe, has different font sizes than when executed on the same computer in the Labview Integrated Development Environment. In each instance the screen resolution is the same. I've used the "Application Font". I'm having trouble figuring why the font would render differently in each case. Of possible signifigance is that I'm running the Exe by simply browsing to the folder where the build procedure drops it instead of building an installation.
I've attached one of the most glaring examples that shows the rendering in each case.
I'm hoping that someone can point me in the right direction to resolve this issue.
Attachments:
Font Differences1.zip ‏1704 KB

Hi Doctor,
two notes:
for the font size differences: I would try to change the font settings
to a more 'specific' font like Arial 14pt. The application font is set
somewhere in an ini-file and the setting may change with the
environment (IDE vs. exe-rt).
for your attachment: please convert pictures to jpg or png. This will
reduce size by orders of magnitude :-) And please crop them, unless you
have a very (VERY) beautiful desktop background picture!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Font size changes when exporting

Hi all,
When i do an RTF export of my report i found that some text has got a different size from the original font size given during design. i had given the font size as 11 during design but when i export as RTF it is shown as 10.5
When i export the same report as an editable RTF the fontsize is 11.
An thoughts on this?
Regards,
Prem
Edited by: prem kn on Jul 15, 2008 6:22 PM

For some export types - RTF and PDF included - the fonts are decreased by some amount, to prevent cut-off issues. It's expected default behavior.
Sincerely,
Ted Ueda

Font size problems between Motion and FCP

I created a custom Final Cut Pro title in Motion. I set the font size to 110 pixels. My custom title works great, with one exception. The 110 pixel font in my custom title doesn't match the size of 110 pixel fonts in other titles. I double checked the font specs between the two titles, and they are identical. But, the font in my custom title is much bigger (view screen shot). How do I fix this?

Hi Jim,
I found the problem. When I right click a text template in FCP and select "open in Motion", the template dimensions are 1920p X 1080p. My original custom templates were 1280p X 720p. So, I didn't realize I was toggling between different template sizes.
Thanks for you input though.

Size mismatch between composition and imported vide clip :-(

Hi from 21 degrees C york UK
This link illustrates my problem:http://i216.photobucket.com/albums/cc53/zymurgy_bucket/misfit-video-clip-langleys-glitch_z pseec728d8.jpg
Somehow my After effects comp is hugely bigget than my video clip, I'm so confused tghis hasnt happened to me before & my head is spinning. Basicall the final out put is for YouTube but I just cannot get the After ex composition to scale down to fit the size of the YOUTUBE clip :-(
Any help very very appreciated!
Grazie,
David

I have since figured this out... you have to drag the composition over from Pr to Ae as illustrated here: (It then becomes "dynamic" )
http://i216.photobucket.com/albums/cc53/zymurgy_bucket/dont-loose-film-fx-after-effects_zp s33d22a32.jpg

Export and Import of mappings/process flows etc

Hi,
We have a single repository with multiple projects for DEV/UAT and PROD of the same logical project. This is a nightmare for controlling releases to PROD and in fact we have a corrupt repository as a result I suspect. I plan to split the repository into 3 separate databases so that we have a design repos for DEV/UAT and PROD. Controlling code migrations between these I plan to use the metadata export and subsequent import into UAT and then PROD once tested. I have used this successfully before on a project but am worried about inherent bugs with metadata export/imports (been bitten before with Oracle Portal). So can anyone advise what pitfalls there may be with this approach, and in particular if anyone has experienced loss of metadata between export and import. We have a complex warehouse with hundreds of mappings, process flows, sqlldr flatfile loads etc. I have experienced process flow imports that seem to lose their links to the mappings they encapsulate.
Thanks for any comments,
Brandon

This should do the trick for you as it looks for "PARALLEL" therefore it only removes the APPEND PARALLEL Hint and leaves other Hints as is....
#set current location
set path "C:/TMP"
# Project parameters
set root "/MY_PROJECT"
set one_Module "MY_MODULE"
set object "MAPPINGS"
set path "C:/TMP
# OMBPLUS and tcl related parameters
set action "remove_parallel"
set datetime [clock format [clock seconds] -format %Y%m%d_%H%M%S]
set timestamp [clock format [clock seconds] -format %Y%m%d-%H:%M:%S]
set ext ".log"
set sep "_"
set ombplus "OMBplus"
set omblogname $path/$one_Module$sep$object$sep$datetime$sep$ombplus$ext
set OMBLOG $omblogname
set logname $path/$one_Module$sep$object$sep$datetime$ext
set log_file [open $logname w]
set word "PARALLEL"
set i 0
#Connect to OWB Repository
OMBCONNECT .... your connect tring
#Ignores errors that occur in any command that is part of a script and moves to the next command in the script.
set OMBCONTINUE_ON_ERROR ON
OMBCC "'$root/$one_Module'";
#Searching Mappings for Parallel in source View operators
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
foreach mapName [OMBLIST MAPPINGS] {
foreach opName [OMBRETRIEVE MAPPING '$mapName' GET TABLE OPERATORS] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT)] {
if { [ regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET DIMENSION OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET CUBE OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET VIEW OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
if { $i == 0 } {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
     } else {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
close $log_file;
Enjoy!
Michel

Can i change font size in jasper exported Html report

how can i change font size in jasper exported Html report.
i also want table in that html report.

So when is it going to be possible, I ask, as this is a question I and many others ask after each update!

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.

Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

How to export and import template and dimensions mumbers between 2 appset

hi expert:
      1.How to export and import template and dimensions mumbers between two application set
      2. In Our project Requirement ,
          we moust be develop our planning in develop evn application set , distribute template and
          dimension mumbers to another Qas applications set .
     3. how can i   package our template in dev application set and Anti-package to Qas application set
         with BPC system tools?
     4. This Requirement is from our Security control Dep. we must be change template version or dimension
          mumber with system tools.
     5.thanks for your help!

Ian,
So, in other words, you're saying that it's not possible to export directly objects (like smart albums) that reside outside of projects?
I know, for example, you can "export" anything created inside a folder by dragging and dropping the folder to another library; but you then have to rebuild the library to get the new folder and its contents to be recognized. For my library, this takes too much time to do.

Exporting and importing table using R3trans program between 2 clients

Hi,
How to export and import a table between to clients in a same system using R3trans program?
I need to copy a table from Client 020 in a system to client 040 of the same system using R3 trans. I need to know the procedure.
Can any one advice
Regards,
Suresh

This is how you do a export and import of table entries.
Export:
Open Notepad and type the following,
export
client = 020
file = 'clone.export.<sid>.<client no>.data'
select * from <client_dependent_tablename1>
select * from <client_dependent_tablename2>
select * from <client_dependent_tablenamen>
Save the file as export.ctl
Run R3trans export.ctl
and the data of these files will be stored in a file called clone.export.<sid>.data in the directory from which you have called R3trans
Import:
Open Notepad,
import
client = 040
file = clone.export.<sid>.<client no>.data
buffersync = yes
Save the file as import.ctl
Run R3trans import.ctl
Cheers!
Bidwan
Message was edited by:
Bidwan Baruah

How do I change the font size in the menus and toolbars

The font size is too small for my old eyes and I would like to make the font size larger in the upper toolbars (address bar, etc.) and menus. Thanks, Jeff

See: Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/162063/

How can you change the font size in the application and system headers?

How can you change the font size in the application and system headers? I searched the system and finder prefs to no avail. Changing the screen density is not a good option.
Thanks

I downloaded Tinkertool. Found the font section and increased the size of most selections. The only thing that changed that I can see is the window label. The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4. Found the finder "show view options" but that didn't seem to change anything either. I'll keep working. Restarted all apps after changes as well.

New user of Mountain Lion. I find that when I attach a URL as a link to Mail 6.0. The font and font size changes!!!!

I have a problem with either Mountain Lion, Safari or Mail 6.0.
When I try to attach a URL as a link that is taken from Safari to mail 6.0 the font and font size changes!!!!!
It changes from comic sans 24 to heltvekia 12!!!! What the heck is going on??????
Thanks for any help you can shed on this problem.
BBC1050

I also upgraded to Lion and do have font problems in Mail. Just in some mails, including my own signature.
I just updated today with 10.7.1, but still have the font problem.
Does anyone know if Apple will solve this?

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Export and import between different versions

Hi everyone,
I have some databases in Oracle 7.2, and others in 9i Release 2. Sometimes we have to do exports and imports between them, and I want to know if running the catexp.sql or the catext7.sql file also applies to 9iR2 version.
Thanks in advance,
Tania L.

According to what I have heard yes but I have not tested.
You can find out that information here:
Utilities Contents / Search / Index / PDF
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96652.pdf
Joel P�rez

Font size changes between Export and Import

Similar Messages

Maybe you are looking for