Font size in abap reports
hi all,
is it possible to increase font size in abap reports.
i am trying to print a Zreport which is having line size of 325 . so i decided to print on A3 landscape . it seems to be printing very small size ,cannot be readable! . in this case i have to increase the font size of the output.
is their possibilities to do.
reply asap,
regards
vijay
Hi Vijay,
You can increase the font size during printing dynamically. In the Device Types -> formats, which ever format you are using, you can ask your Basis person to edit the format and increase the font size. Also the page setup like portrait, landscape, CPI, etc can be done there itself.
See the below link it will help...
http://www.sap-img.com/basis/how-can-i-print-a3-format-in-sap.htm
Regards,
P. Kumaravel.
Similar Messages
-
Hi ,
I want to know how to change font size in ABAP list report.
I want to enlarge the font size.
I have tried print control but it doesn't work.
I have also tried line size and line count
but it can only reduce the font size .
Thanks.
JohnHi Kong,
Try with following example:
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
PRINT-CONTROL FONT 1 LPI 6.
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
End of Program
thnks
Anurodh -
We'd like to change the fonts in an abap report that must print on screen, we tried to use the PRINT-CONTROL FUNCTION but seems good only to print on the printer
I agree with Naveen , However there is a small trick here if you can show the data in your report witht he entire line painted in Yellow , then it appears to be bold when you take the printout. Well , i have learned this in version 4.0B and whenever there was summary report or subtotals i used to paint that strip with colour yellow when you take printout it appears bold.
Thanks ,
Vievk. -
How to increase font size in the report when emailed as PDF
How do I increase the font size of the report when I distribute the report as PDF to the users. I tried using different paper sizes in the LayOut tab in Broad Caster and Orientations. When I open the PDF from the mail I see the report shrinked and not readable, but when I magnify the report the numbers are visible with no loss in quality. I cannot give the users to print a shrinked PDF file. I would like to see a visiable font and print the same size what I see.
The size of the font is increased by selecting a bigger page size while emailing. This will automatically increase the size of the page.
-
How to increase the font size in abap editor
Hi
Open the SAP GUI icon.
you can see an icon at extrme right whth green red blue colors.
or Use (ALT + F12)
click on that Select New visual design.
Thare you can find the font.
Now you can reduce or increase the font size.
Regards
Kiran.
Edited by: kiran Pasala on Feb 19, 2008 4:12 PM -
How to manage the font size for webRfc Reports
Hi All,
How to manage(increasing or decreasing) the font size for webRFC Reports.
Regards
SriHi,
Can you try republishing and see ....
Ideally the font size would be controlled by the <font tag and if you have made changes correctly it should be reflected correctly.
Check whether the HTML code is also correct.
Thanks & Regards,
Vijith -
Increase Font Size in Standard Report
I need to Increase the font size on a standard report,
i changed in the layout editor and nothing is happening when i run the report on the applications. What ever size i change i get printed with only one size and type.
how can this be acheived ? plz advice..
i did some customizations on the standard report.Hi,
Please check thw SRW. option, through this you can also change the font size, is your report is running in Character mode, if it is running in PDF format then with SRW. facilities you can change the text size.
Thanks
Shishu Paul -
I'm working on a report where it has to fit a specified page, but using the normal abap reports ( can't use smartforms in this case) , how do I change to font size to smaller size?
Thanks,
Tarun KumarHi Tarun,
there is no need of changing font sizes.
In order to fit the report into a specified format what you have to do is
Click on print button.
then click on Properties
then you will get a pop window with overview details.
click on format : there increase number of rows and columns as per your requirement.
then click on settings .
There give validity for this report only..
if you still want to decrease font size..
Go through the following link..
http://****************/Tutorials/ALV/Font/change.htm
Regards.
Eshwar. -
How to change font size in Interactive report
Hi I am using Apex 4.02 version I need to get all reports into single page but it displayed excess the page limit. Example If report having more than 15 columns it should display in single page so I tried "break" option in all report column headers still it exceed the page. Can any one help me for this ..?
How to reduce the font size or table width in Interactive report?
Thanks
Edited by: Sara254 on Jul 9, 2012 11:29 PM
Edited by: Sara254 on Jul 9, 2012 11:30 PMHi,
you can do this in your style sheet.
Look for class .apexir_worksheet_data and change the font-size. -
Change font size in Z-Report created from template
A Z-report is being created from template which uses WWI.INI file integration to generate the report in Microsoft Word. In that report the text from phrases is passing over the specified text box. So all the phrases are not displayed.
Now user either want the size of font to decrease or change the size of the box.
We are going ahead with changing the font size. To do so we are editing the template in CG42. Is this approach is correct or we can change the font size from somewhere else??. If yes ,then how to proceed ??
Your help will be greatly appreciated as I am new to EHS and have very limited knowledge.Hello Aasim,
Just try it out
If you are afraid to destroy something on the WWI template create a copy of the template and do your testing there....
Read the SAP help on WWI.
Can I edit font in the Microsoft Word file which is generated after I click "Document (F7)" button??
Yes you can.
If yes , then suppose I change the font size in a text box there.Does the font of phrase's text also changes accordingly when the report is generated.
Yes.
And does that change is for all the phrases in that text box ( since no. of phrases varies according to the specification)???
Yes it will change the font size for all phrases in that text box.
There is an option in WWI where you can change the text size dynamically if the text is in a real text box.
However I'm currently not sure if this works for all kind of WWI templates or only for labels.
Hope this helps
Mark -
How to increase the font size of the report output in the printout.
Hi Team,
i have a requirement like to print the report output as a direct print from an internal table.I am using the below mentioned code, the output is printing fine but the Font size of the output text is so small so i need to increase the font size of the text of output data.
call function 'GET_PRINT_PARAMETERS'
exporting
immediately = 'X'
line_count = 65
line_size = 320
mode = 'CURRENT'
no_dialog = ' '
release = 'X'
user = sy-uname
importing
out_parameters = st_param
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
if sy-subrc eq 0.
new-page print on parameters st_param no dialog.
could you please suggest me how to increase the font size while printing the report output..
Thanks in Advance.
Puneet.hey,
in our system when we click on print. on widow is coming.
there is a properties button.
we click on it.
there FORMAT----AND then we select forat from there and then printing .
not sure. but check on ur system. is there properites button.
HI,
READ THIS,
You can specify attributes such as the character width and font size in the device type formatting yourself.
contact ur basis team .
in the report PRINT-CONTROL SIZE option is there. try to find more o this. -
How to change the font size of pdf reports
hi,
in my project i'm using wad for my reports
when i execute these reports from wad and convert it into pdf format the font size of the pdf report is very small.
what can i do in order to rectify this?
are there any settings where i can change the font size?
thanks in advanceI do not have AA6 available right now (I can check at home this evening). I am also using AA Pro, not Std. In AA7, there is a text box tool that is a commenting tool. When I started typing, a properties toolbar came up that had the font size and such. I haven't figured out how to get the toolbar after the fact. In AA8, I selected the text box tool and then went to view and selected the properties bar (the font size and all showed then), or use Ctrl-E when editing the text. I have not been able to figure out how to edit the text in a text box after you have created it - think it is a mental block right now. Bill
-
How to increase the FONT Size in a report while printing in SAP
Hi ,
Can anybody let me how how to increase the Font size while printing a report in SAP .
Thanks
Dhaval..hi Raje,
WELCOME TO SDN
use <b>PRINT-CONTROL</b> option
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
How to change font sizi in a classical report?
REgards,
Santosh
Message was edited by: Santosh Kumar P -
hi all,
I have a classical report and it displays report in write statement.
i want to make the output font bigger?
how can it be achieved....
thnxhi rudra,
it is not possible
check this thread
font size in report
hope it helps
thanks
Sachin -
HTML font size in Oracle Reports 11g
I am migrating from Oracle Reports 10g in OAS to Reports 11g in WebLogic.
However when I display all changed reports using Web Browser (same), the font size is changed(comparing the 10g reports to 11g reports). I would like to keep unchanged.
(command using DESTYPE=HTML)
May anybody can give me some guidance? (would like to see if there are any file or setting in EM which can alter the size of font in web)
Thanks.
Edited by: 817748 on 2011/7/19 上午 9:45There is a better forum: {forum:id=84} for your question
Maybe you are looking for
-
It gives me the option to delete FIFA, but I would like to avoid this, in fear of losing my saved compitions and Ultimate Team.
-
hi all i have a stwo select list in my jsp page. with the help of a javascript it's possible to move items from one select list to the other and vice versa. Now i would like to allow multiple selection, in order to move more than one element from one
-
Does anyone know how I can assign a digital signature to a PDF document, a word or pages document or an email message using Snow leopard? Thanks OF
-
How to create check boxes that will deselect after selecting another checkbox. I want to have the option to only select only one checkbox as a response?
-
Oracle Business Events related help needed
Hello All, Good Morning , wanted some help regards Oracle Business events be used for sending notifications. We are having a situation wherein we need to send notifications to the sales team whenever there are changes to the order line status..lets s