Font Size in Update...Really? I mean REALLY???

Dear Skype...I thought the tiny font absurdity really could not be surpassed.  But - O.M.G. - you've again outdone yourselves.
My Skype just "updated" (cough) and the fonts are even SMALLER.  Are you kidding me, seriously!?!?  The contact list and main window area are now approximately 1 pt. font.  ONE POINT.  If that.
This is about the 6th "update" where the contacts and main window fonts have shrunk.  WTF?  
This is NOT acceptable, and any programmer with the IQ of a half dead barnacle could EASILY fix via code tweaks in half a coffee break.  Utterly astonishing that instead, they SHRUNK it.  Again.  See the image below, of the legible menu bar, but the almost invisible window text.  Good effing luck reading that one.
Again I ask, why can we so easily adjust fonts on the stupid forum, but not on Skype?  Why do you refuse to fix it each "update" and instead go smaller and smaller? 

Actually, the fonts are larger, the 6.21 uses 8 pts Tahoma (mine does atleast) and the 7.x uses 10 pts <something>. You are free to change the fonts and size in tools > options > Chat & IM > chat apperance > change fonts (does'nt get any easier than that).
Keep in mind that people generally want the smallest font they can live with, to cram the most into the chat window etc.

Similar Messages

  • Incoming Email font size after update to 2.1

    Several emails that came in after upgrading to 2.1 have very small font and won't change even when changing the minimum font size in the settings. Has anyone else experienced this issue?

    Hi pixelpunch,
    same here - but I had the possibility to restore my touch on another Mac (not the iBook, has only USB 1.x). Tried the update then again: with a clean touch-system 2.0.2 from the downgrade before: it didn't work - *again error 6. No possibility to restore*.
    Fortunately I can use - after a new downgrade to 2.0.2 - this system: but it's boring and I can understand you: I'm using Apple products since 1984, but I think (possibly caused by the complexity of the systems?) there are more and more errors...
    Many greetings from Germany, Hermann.
    P.S.: I hope there will be no nervous breakdown, but the next I'll try is to use a fresh system 10.5.4 with a fresh iTunes 8 on another HD.

  • Just updated version on itouch via itunes. Icons are now massive - can anyone advise how to revert to normal font size, just updated version on itouch via itunes. Icons are now massive - can anyone advise how to revert to normal font size

    Just updated to version 4.35 via itunes.   My icons are now massive making it almost impossible to do anything, even open up.  Can anyone advise me how I can revert to normal font/icon size.

    Try to double tap with three fingers on the screen to get back to normal size.
    Zoom in or out: Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
    page 204 iPod_touch_iOS4_User_Guide
    Message was edited by: Ingo2711

  • How to set Fonts size in X (whole system)

    Hi,
    I just bought a 19" monitor, and finally, got my resolution up from 800x600 to find out that i cant get to increse the xterm, Eterm, Firefox, Thunderbird, Gaim and everything to have an acceptable font size...
    I mean, is there a way to set the whole system font to some minimal size?
    I know how to change in almost every app (have to see if they can remember it, but thats just checking) but there are some i dont... xterm for example...ive looked at the man page, but there are so many options (just with the font subject, i do use several of the other flags) that i couldnt find the one i wanted, just to increase the font size... in Eterm there are 4 pre-set sizes, although i would like to increse it a bit more...
    I use Enlightenment, so i dont have any Gnome/KDE control center to do anything...
    As usual, any tips are welcome!
    Thanks!

    I can't provide much help but I can give you a hint: change the DPI globally with... one sec... xfce has some sort of script for settings the DPI globally...
    This is the part where the DPI is set
    # Those are my settings, change them as appropriate...
    # Xft DPI: 96
    # Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
    # Xft hinting: 1/0
    xrdb -nocpp -merge - << EOF
    Xft.dpi: 96
    Xft.hinting: 1
    Xft.hintstyle: hintmedium
    EOF
    You might run the command with another DPI setting...
    xrdb can be found in /usr/X11R6/bin.
    Once again, this is just a thought, I don't know how successful this change will be. Good luck.
    You might want to have a look on Google.
    IceRAM

  • How does font size relate to font height

    Hi,Im getting confused about font size.
    If I use a font of say font size 12. Does that mean
    - its maximum height is 12
    - its maximum ascent above the baseline is 12 but it can also go below (descent) below the baseline making total height something else.
    - something else.

    The short answer is: "No".
    The font size is APPROXIMATELY equal to the ascent, or probably more accurately, the ascent is approximately equal to the font size. But if you check font metrics for any given font you will see that they are not exactly equal. Perhaps there is some definition somewhere that specifies a precise relationship, but if so, I don't know what the formula is. Even the font metrics are only something of a general hint: according to the API documentation, some characters can be taller than the ascent or drop lower than the descent. And of course character widths vary widely.
    My practice is to get the font metrics object and ask what I've got, rather than relying on anything.

  • Font size in hotmail and screen is really small

    Somehow I managed to decrease the screen and font in hotmail. I cannot fix it. I have it on my foxfire toolbar. Windows Live has a solution for explorer but not foxfire. The font is about 8 - barely readable. Can you please help?

    This could be caused by either of two things
    * Press ctrl + 0 (that's a zero) to restore page zoom
    or
    * Go to Firefox Button ->options -> options
    * Select the "Content" tab
    *Set the font size to 16, also, click advanced and make sure those are set to 16, although you might want to keep monospace at 13
    See Also:
    [https://support.mozilla.com/en-US/kb/Websites%20look%20wrong Websites Look Wrong]

  • Base Font Size REALLY TINY in JEditorPane

    Ok--
    I am writing a simple html-viewer for the "Help" frame of a larger application...
    I have it working, except I have encountered this strange issue--
    The fonts are TINY.... so tiny, that some of the little sublinks are blurs....
    How can you rectify the base level of the font size for all documents rendered by the JEditorPane?
    ALSO--extra bonus if you can re-clue me into how to start a JFrame not mostly-minimized (IE- equal to the size the EditorPane should be)

    The answer to the second question would be:
    set the preferred size for the EditorPane and call the pack method on your JFrame before setting it visible.

  • [SOLVED] Font size issue since recent update

    I swear I'm going insane.
    Since the last round of upgrades (including a kernel update, an nvidia driver update and xorg 1.8) my fonts seem larger and programs which start up windowed (e.g. sakura) are taking up more screen space than before.
    xrandr correctly returns my screen resolution (1440x900). Following the instructions for checking if xorg has correctly detected DPI, it seems everything is in order. All I had to do to get things more or less back to normal was to set my fonts to be a size lower (in obconf and lxappearance) - but at size 7 for everything now where before I was on 9.
    Please tell me I'm going nuts and imagining things, or alternatively if you have any suggestions for what might have happened.
    Thanks.
    Last edited by epimer (2010-06-27 14:56:53)

    I agree with brebs, especially since setting my screen to the correct DPI recently involved changing to font size 7 to make things look right again
    you could check Xorg.0.log.old maybe to see what was being set for dpi, or if you really wanted to, you could downgrade and see what xorg sets

  • After the recent update the entire browser, including menus, icons, and everything on the web page, are too small. Fonts are smaller, pics are smaller, zoom settings will not remain universal. Minimum font size will make text readable, but all pics are to

    The new update has screwed up my browser settings, I cannot get them fixed and Im pissed because my computer is an eye-sore to read until this is fixed! EVERYTHING in the browser is smaller, fonts, menus, icons, web page content, pictures, tables, etc. I have set the minimum font in the settings and the text is just to a point where it is easily readable at the maximum size setting, but all the menus and icons are still tiny and hard to read. The last version I had installed worked fine with no add-ons needed. Everything fit the screen fine and was easily readable without modification. I want this version off my PC and I want the last version I had back on but I dont know what version it was!!!!!!! ARARGGGG
    In fact, this stupid troubleshooting window that I am in filling out this form doesnt fit the page right at all, and edges of the text are cut off, so Im not even sure what some of these boxes are asking for!!

    See [[Toolbars and page content appear too large after upgrading to Firefox 3]]
    *Try to adjust the DPI setting, see http://kb.mozillazine.org/layout.css.dpi
    *Try to set the pref layout.css.devPixelsPerPx to 2 on the about:config page.
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.
    If you need to increase (or decrease) the font size on websites then look at:
    Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Adobe Reader XI 11.0.07: font size in comments has been reduced to about 5pt with this update

    Win7 x64/sp1 with many updates:
    For the last few years, I have experienced major font problems with the comments, such as attempting to make a change in a font style causing Reader to lock up for about 3 or 4 minutes.
    I allowed the update to 11.0.07 this am and the pdf I was working on, at length yesterday, now has the font size in the numerous comments I created reduced to about 5 pt. I know: that small isn't possible, but that's about what it looks like.
    I believe that Adobe's quality control on Reader has been grossly lacking in the comments area. It has been suggested to me that I switch to PDF-XChange.
    I will seriously consider it, because, as I open up pdfs from years past that I need to use for the material I'm working on, I see that the font size in all of those comments has been reduced drastically as well.
    The only remedy that I can find is to open each comment individually and "Clear formatting."
    That will amount to an enormous waste of time.
    Please hire someone who is interested in quality control.

    Hi Rohit Sh,,
    Thanks for your answer. I have encountered a similar problem. While the font size of the comment created before the update remains unchanged, that of the comment created after the update reduce to about 5pt.
    Then I tried to increase the Font Size from "Commenting" section under Edit->Preferences, the font size of both the old comments and new comments get increased. So, for example, suppose the desired font size is 10pt but the new comment look like 5pt, then when I update its value into 10pt again, nothing happened; when I change its value into 15pt, the old comment become 15pt and the new comment look like around 7-8pt; after this, if I change its value back to 10pt, the old comment would become 10pt as desired but the new comment now would become even smaller than 5pt. In conclusion, I can never make all comment have the consistent font sizes by changing the Font Size from "Commenting" section under Edit->Preferences, as it worked in the earlier version.
    Please fix this. Thank you very much.

  • After Firefox was updated, the font size on my screen was decreased for all applications. How can I increase the font size on my screen ??

    After the update, the next screen showed all the letters in smaller font, with fewer pixels. All the screens are like that now and I found nothing in the Firefox help contents. This is a problem because I have vision difficulty. So, how can I increase the font size to what it was before? My screen is about 20 inches wide.
    Also, any chance I can change all the font to Arial instead of Times New Roman?

    Thanks -- that does help!

  • Most recent update changed all font sizes. What is best method to change back to to preexisting Fonts

    The most recent update changed all font sizes (smaller). What is the best method to enlarge?

    yeah, that's what I ended up doing late last night because the white font against pale gray background was driving me nuts. I hadnt changed anything. been using the same theme for about 4 months but then all of a sudden, like I said, the font color mysteriously changed.
    anyway, thanks for your help.

  • Should an iphone software update really take 3 hours?

    should an iphone software update really take 3 hours?

    It depends on a number of variables. It could be the speed of your internet connection, if you are trying to update OTA versus direct connection in iTunes, the amount of data, music and apps that need to be synced back to the device after the update. You can always remove the device from iTunes and perform a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The device may have completed the update and just not displaying correctly. If you do remove and it is not updated, just connect again and start the update again.

  • Updating font size..

    Hi, i have JCombobox which has various font sizes, and I have all my components in my system, using a static variable for font sat in a static globals class. When i chose the font, I want to change the font for all components in the system. Any idea how? Id like to avoid adding a method to each class... Does Swing provbide a standard update method?

    One way you could do it is to override the look and feel for each component that need a font update for. It's still preety much work :). I have no better ideea right now. I hope it hepls.

  • My touchpad no longer controls font size in foxfire, which means I can't read some of my emails, WHY?

    How can I change font size on my email? I used to be able to use the touch-pad on my laptop. It no longer works in firefox but still works on document files, so it's YOUR FAULT!! It always worked until I installed firefox 4.

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
    browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
    browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.latched -> <b>false</b>
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    * http://kb.mozillazine.org/about:config

Maybe you are looking for

  • Google tool bar not showing

    I have downloaded and installed the Google tool bar. I have the tool bar checked but it does not show up. It appears the menu bar on top drops down to make room for the tool bar but the icons never show up. I can't figure out what is blocking it from

  • How do you extract attachments from an emails in RTF-Format

    When ever the XI receives an eMail in RTF-Format the XI can not extract the eMail-attachment. Does someone have the same problem? Is there a solution? Thanks

  • Resetting X6 to 'out of the box' state?

    By 'out of the box' state i mean both phone memory and the mass memory wiped clean, and every 3rd party app which i installed gone. How do i do it? Any help will be appreciated.. Thanks.. Nokia X6 32Gb (comes with music) Solved! Go to Solution.

  • Execute multiple sql queries in plsql

    Hello All, I have two queries, How to execute multiple sql queries in plsql. Once the query completed in sql+ that report/output has to come in html. Please guide to how to do that. Thanks and Regards, Muthu [email protected]

  • Need to migrate Shared services users and groups from 9.3.1 to 11.1.2.2 ver

    Hi All, We need to migrate Shared services users and groups from 9.3.1 to 11.1.2.2 version. Any help would be appreciated. Can we use CSS import export utility? Thanks in advance!!