Font size incorrect when printing smartform

Hi,
I have a smartform containing many smaller windows with frames. One big window should show a word in grey and in big letters behind all the other windows.
In my smartstyles, I have used the font family "HELVE", font style bold and the size 72. When I print to a sap printer device, the word is printed in very small letters and in black. When I´m printing about LOCL and then on the same printer, the fontsize is correct.
What can I do to change that?
The second problem is, that the letters are shown over the frames of the other windows, but it should be completely in the background. I put the window with the backgorund letters as the first window on the screen to get it behind all others, but it´s not working....
Cheers Arne

there is some proble in printer setting.....
contect the basis person....
method for font size....
Define the paragraphs & character formats using SMARTSTYLES & use them in your smartform.
You have to give the smartstyle name in the Form attributes-->Output options for the formats to be used in your smartform.
frm ur pc only u can get this font file..
go to control panel , in tat go to font and select your desired font file..
now give the path of this font file in se73..
after doing that this file will be uploaded into ur SAP server.
Se73 - > True type font installation - > Font name - > specify the name of the font file - > execute

Similar Messages

Can I specify font size=1 when printing HTML?

I want print my HTML report in font size = 1. I don't know how to do it?
When using report builder, there seems no special control for printing HTML?
Hope experts here broaden my mind
Richard

This is possible
1) In Builder paper layout select the object for which you want to change the font size
2) In menu
Format --> Font
You can change the font and its size
Then generate to html/htmlcss . I have verified this
Thanks
The Oracle Reports Team

How to change font size in check printing program in AP Invoice

I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
report to print check.
Concurrent program short name : APXPBFEL
Prt file : APLASP.prt
I modified prt file for code 199 like below
code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
Please let me know if you any of you know how to change fonts.
Thanks,
Anand

*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Font size in alv printing

He friends,
While I am printing report from alv it is printing in small font size , Please advise how to increase font size in alv printing .
Regards
S.Sharma

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/b6/e3eb40c4f8712ae10000000a155106/frameset.htm
For Fontsize also you have option in the ADD_TEXT method.
For Details check this program DD_STYLE_TABLE
Edited by: Neenu Jose on Oct 24, 2008 10:37 AM
Edited by: Neenu Jose on Oct 24, 2008 10:38 AM

How can I change the fonts in "contacts" when printing mail labels

How can I change the fonts in "contacts" when printing mail labels ? I used to be able to do this but in Mavericks this ability seems to have gone away. Am I missing something ?

Actually in my case it doesn't work. I used to be able to pull up the font window with it but the button merely flickers when I click it. The image selection button and font color both are functional. WEIRD. I don't think this is a Mavericks issue as I recall having it come up with one of my user profiles before installing. Now I can't make it happen with either of my user profiles.
I don't seem to have printing issues in other applications. And I recently reset the fonts in a futile attempt to correct this.
I may post a new topic in Mail Contacts and Calendar if there is no response here after a bit.

Report file size limitation when printing?

Does anyone know of a file size limitation when printing a .NET run Crystal report? We run a browser app, which opens a new browser when a report is printed. That works fine. When we PRINT, the ActiveX print dialog box appears. If the report is large (> 40 pages or so) it crashes our entire application. It works ok if we export to PDF then print, but I am trying to get to the bottom of why it is crashing.

Hello,
What version of Cr and .NET?
Does your printer have limited memory?
Is it local printer?
Have you tried installing the latest Drivers for it?
What Browser are you using and have you tried any other?
40 pages not much local memory so it shouldn't be a problem.
Create a new Printer and select File rather than port or LPT as the destination to see if it's a physical printer or network issue.
Try a different printer altogether also.
Also refer to Rule of Engagement posting before submitting your question so you provide as much info first.
Thank you
Don

My font sizes change when I send e-mails from Apple Mail.

My font sizes change when I send e-mails in Apple Mail. Sometimes the font style changes, too.
This is unacceptable, as I use my e-mail for business applications.
Any suggestions for a fix?
Thank you.

Before you do that I must warn you that also with PC is the same.
It's not the hardware nor the software that makes the difference, because e-mail must obey to certain rules that is RFC.
Maybe what you are looking for is a message that looks like a web page.
You can find something of that kind here.
http://www.jumsoft.com/stationery/
But again, the recipient e-mail could have little differences from the original that depend on many variables
If you are curious enough to know a little more about electronic mail you can read this page
http://en.wikipedia.org/wiki/Email
P.S.
IMHO you already have the best in Hardware and software. It would be a pity to give away that gem

Font size increases when smartform is sent as email attachment

Hi,
I am facing a problem with font size of smartforms. when the output medium is printer, the form looks good. but when i convert smartform into PDF and send as email attachment, the font siz increases and text is getting truncated. Please help me solve this problem.
Thanks,
Hari

Hi,
Check the given below links and compare your code with them:
http://sapient.wordpress.com/2007/06/19/smartform-to-mail-as-pdf-attachment/
http://sap4.com/wiki/index.php?title=Envio_smartform_por_mail
If still there is a problem, please do share a code.
Also check sending a PDF document from your system via a Email(Outlook), and open the same in a different system and look for the changes.

Change Font size for Line printer when Printing ALV

We are using device type IBM 64xx LP+ emulation 1.00A to print to an IBM line printer.
I would like to change the font size of an ALV report I am sending to the device.
Can the font size be set in the Printer Initialization section of the Format?
Ex. I am using X_65_255
What/Where can I add the font size
Set to P-Series Emulation (SSCC P 0)
\0x1b\0x7c\0x7d\0x3b\0x50\0x30
Emulation Reset                               (SFCC @)
\0x01\0x40
Character Set = IBM PC, ASCII, IBM PC(0850)   (SFCC l 0 0 1)
\0x01\0x6c\0x30\0x30\0x31
Print Mode/Pitch Selection = DP Quality, 20 cpi
\0x01\0x7c\0x7d;Sxxxxx;0;0;xxx;0024;0048
Line Spacing = 6 lpi                          (SFCC 2)
\0x01\0x32
Forms Length Set = 66 lines                   (SFCC LINES;66 <CR><LF>)
\0x01LINES;66\0x0d\0x0a
Thanks,
Mike

You will find the P-series emulation here: [LinePrinter Plus programmer's reference manual|http://www.printronix.com/WorkArea/downloadasset.aspx?id=4546] (printronix doc)
You don't have many options with P-series. Maybe it's better to choose another emulation, and get the IBM 64xx programmer's guide.

CRVS2010 Font size reduced when exported to pdf from web or VS2010 IDE

I found much the same issue on this post:
[CRVS2010 Beta - Printing incorrectly using VSCR2010;
I have checked the SP1 docs and this issue is not addressed. I downloaded the runtime CRforVS_redist_install_64bit_13_0-1.zip. I found it using the link in this post [Re: Printing Crystal Report decreasing font Size in web.; No joy.
I have tried to utilize the info referenced in this post,[Re: CRVS2010 Beta - Printing incorrectly using VSCR2010] the link you gave seems to generate a 404. No joy.
I already used every phrase I could think of in the box in the upper right hand corner of the page as you suggested in other posts.
I am surprised that editing registry keys has been the work around for so many years and versions of CR. There also seems to be many conflicting versions of registry edits for the different versions of Visual Studio. I was unable to find any specifically for VS2010.
Any help is appreciated.
Thanks!
Edited by: Steve Holzer on Sep 24, 2011 8:00 PM
BTW The issue occurs whether on my dev machine (localhost) or the production server.
On my dev machine I am running Win7Ultimate with IIS 7 64 bit
Web Server runs Windows Server 2008 R2 64 Bit
When I open regedit, all of my entries start with HKEY_xxxxxx

Hi Steve,
The registry key to modify for cr4vs2010 is
HKLMSOFTWARESAP BusinessObjectsCrystal Reports for .NET Framework 4.0Crystal ReportsExportPdfUsePrecisePositioningForText = 1
Above info was found in the following thread..
CR2008 - Fix for decreased font size in exported PDF does not work?
I have tried to utilize the info referenced in this post,Re: CRVS2010 Beta - Printing incorrectly using VSCR2010 the link you gave seems to generate a 404. No joy.
[Here|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303337333133383331%7D.do] is the correct url to the sap note...
regards,
Deepu.

Increase font size of a print out

Hi,
We neet to print one ABAP report in landscape. The font is very small to be visible. So, we need to increase the font.
Currently while printing on a local computer, the format its using is X_65_255.
Please suggest me what has to be done to increase the font size to get the report clearly visible.
Thanks,
Sailesh K

Right!! This will happen, this is why I suggest to shorten the size of the report, get rid of gaps in the columns, get rid of un-needed columns, etc. This is the only way to get the font size to increase, because the system wants to show all the data in the report, so it shrinks the font to accomodate the 255. A 132 format looks very good on an 8 1/2 X 11 sheet in landscape. The font is a very good size, as you increase the columms, the font will decrease. Do you understand why it is this way? Think of it this way, if you need to put 500 characters across the page, what do you do? Shrink the font, right? This is what the system is doing when going with larger number of character columns. If you want to get the report to a nice readable font size, you must bring the format down to 132 characters across.
Regards,
Rich Heilman

Font too large when printing an incoming email

I want to change the font size when printing out mail in my inbox. The email font size is small and OK, but when I print the email, it's too large. How to I change this?

Help

Font size increase on printing

I have increased the font size on the email screen. I wish that to be the font size when I print the message. Please tell me how to do this? Jack

Firefox button > Print > Page Setup = '''Scale''' - that is what controls the size of the printed font

TEXTEDIT -- 'screen font' size v. 'print font' size

Does TEXTEDIT allow documents to be viewed in a different font size than the one used for printing? --
-- i.e., e.g., is there any kind of 'zoom' feature that works strictly for the screen and is independent of printing?
I often like to print in a small size font (8 pt.) and am used to being able to do that (e.g., in MS WORD) while still viewing text on-screen in a readable font. However, when I choose 8 pt. for printing from TEXTEDIT, the screen font size shrinks too much to be readable and I haven't seen any way to make it larger without also affecting the printout.
Any cure for this?
Thanks.
(BTW, is there a better place -- i.e., discussion forum -- to ask TEXTEDIT questions?)

It doesn't appear so. Textedit is a fairly basic word processor and because of that you won't find features that are on other more elaborate apps.
I use an app. called Mariner Write for most of my main printing/word processing needs ...there are others out there as well (both free and not) - he's a site with a great selection and description of various 'word' apps...
http://pure-mac.com/textword.html

Need to increase the font size of SAP printer

Hi all,
We had some new HP printers HP4015 which needs to print from SAP . we created the new device type ZHPLJCM1 after checking correct device type for it from HP printer site. For some users printouts are coming in small fonts ,they wanted it to print in big fonts .
These are some of the t codes that they use KAH3 , FB03 , Y_DEV_39000067.
we tried to change the printer fonts in SE73 of that particular device type and increased the font size , but that also ended in vain.
Kindly suggest possible ways by which we can solve this issue.
Please let me know if more information are needed.

Hi,
Is this ABAP lists, sapcript or smartforms? For sapscript or smartforms, you need to specify the font size in the paragraph/character formats for sapscript and in the smartstyle for smartforms.
For ABAP lists, the font size is selected based on the format used. e.g. If you create a list with format X_65_255, it should print in landscape and the font size is calculated based on the size needed to fit 255 characters into a page. If the format is X_65_132, then the font size is calculated based on the size needed to fit 132 characters into a page so it is a bit larger.
Regards,
Aidan

Font size incorrect when printing smartform

Similar Messages

Maybe you are looking for