Font Size & Leading Reducing

Hi All,
How to reduce the font size & leading for all the para & char styles?
Any one help me. Thanks in advance.
Sam

Actulay the script doesn't reduce the leading if it's in "Auto". It goes to catch & ignore the error.
Based on the font size only the leading reduce automatically.
Regards,
Ramkumar .P

Similar Messages

Font size appear reduced from original document?

Hi all--
The fonts appear at least 1/2 pt. smaller in the PDF that I am generating than in the original word document. Is there any way to preserve the size of the original in the PDF output?

I changed the printing page scaling configurations, from the default 96% to 100%, solved the problem. Question is how do I lock the larger size down for my customers?

In Crystal Reports If the length of text is high then reduce the font size

Hi All,
I want a formula (or) solution for the following issue. If the length is high, then the font size should reduce.
Regards,
RK

Hi,
If you are using CR2008.
Right click on the Field,
Click on 'Format editor'->On 'Font' Tab
The third option will be 'Size,. Click on 'X-2' Button belongs to Size ( Third one from top Right hand side).
Now Formula editor will popup. Write formula on that,
Like
if length({DB.Field1}) <= 10 then
10
else if length({DB.Field1}) > 10
12
OR, Better you can Go with select.
Select length({DB.Field1})
Case 1 to 5: 16
Case 6 to 10: 14
Case 11 to 15:12
default:
10
regards,
salah.
Edited by: salahudheen muhammed on Aug 19, 2009 8:33 AM

Java Reports. Shrink the font size of the texfield.

Hello,
I am working with Jasper Reports. I want User Comments to come it to report.
Problem is if the Comments are bigger then it take more vertical space. But I want that its font size should reduce to fit into that area.
I hope you understand
Please reply
Thanks
Venkat

Try a Jasper Reports foum. This isn't one of them. Locking.

Type copied from Photoshop to InDesign doesn't keep font, size, etc..

Is there a way to copy type set in Photoshop and paste it into InDesign and have it keep the font, size, leading info? Using CS3 here at work, and occasionally get Photoshop files with type for position, that we need to set in InDesign. I try to copy the type and paste it into InDesign, but it doesn't keep the same font, or size, etc... I've tried looking into the preferences, but don't see anything that would help my cause. Is there something I'm missing?
Thanks in advance for any help.
Steve

Bob, Thanks for the response, though not the answer I was hoping for! :-) You'd think that between the 2 Adobe applications, you'd be able to copy and paste type and have it hold all the info. Oh well.
Steve

Email font size is tiny when I print. Composing and reading is fine.

How do I Increase / reset the font size of my email messages when I print.
Somehow overnight the font size has reduced to an almost unreadable size, but ONLY WHEN I PRINT emails.
How do i increase and reset the font size of my printed emails?

In the print dialog, check that the scale is set to 100%.

Adobe Reader XI 11.0.07: font size in comments has been reduced to about 5pt with this update

Win7 x64/sp1 with many updates:
For the last few years, I have experienced major font problems with the comments, such as attempting to make a change in a font style causing Reader to lock up for about 3 or 4 minutes.
I allowed the update to 11.0.07 this am and the pdf I was working on, at length yesterday, now has the font size in the numerous comments I created reduced to about 5 pt. I know: that small isn't possible, but that's about what it looks like.
I believe that Adobe's quality control on Reader has been grossly lacking in the comments area. It has been suggested to me that I switch to PDF-XChange.
I will seriously consider it, because, as I open up pdfs from years past that I need to use for the material I'm working on, I see that the font size in all of those comments has been reduced drastically as well.
The only remedy that I can find is to open each comment individually and "Clear formatting."
That will amount to an enormous waste of time.
Please hire someone who is interested in quality control.

Hi Rohit Sh,,
Thanks for your answer. I have encountered a similar problem. While the font size of the comment created before the update remains unchanged, that of the comment created after the update reduce to about 5pt.
Then I tried to increase the Font Size from "Commenting" section under Edit->Preferences, the font size of both the old comments and new comments get increased. So, for example, suppose the desired font size is 10pt but the new comment look like 5pt, then when I update its value into 10pt again, nothing happened; when I change its value into 15pt, the old comment become 15pt and the new comment look like around 7-8pt; after this, if I change its value back to 10pt, the old comment would become 10pt as desired but the new comment now would become even smaller than 5pt. In conclusion, I can never make all comment have the consistent font sizes by changing the Font Size from "Commenting" section under Edit->Preferences, as it worked in the earlier version.
Please fix this. Thank you very much.

Reports 6i - character mode report - to reduce font size of field

HI, friends,
I am using Developer 6i with windows xp platform.
In reports how to change the font size of a perticular field in the layout.
In character mode report it is not possible to change the font size directly.
I tried using the properties Printer code before ,printer code after i.e for e.g by giving the values
printer code before - &1, printer code after - &1. But on printing the report on paper there is no change
in font size.
what to do? should i change any thing in printer files like .PRT files?? if so how?
or Any altenate method??
plz suggest.
with thanks
GMS

HI, I My self writing , who created this question, as I got sucess in changing the font size.
my dflt.prt in printer folder has the following,
printer "dflt"
height 46
width 130
after page control(L)
return control(M)
linefeed control(J)
code "1" esc "G"
code "2" esc "H"
code "3" esc "4"
code "4" esc "5"
code "5" esc "W1"
code "6" esc "W0"
code "7" esc "C"
code "8" control(O)
code "9" control(R)
I am able to increase the font size using code &5 and & 6 for the fileds or lables in report.
But how to reduce the font size ???
which code should I use in printer file. Our dot matrix printer is of type EPSON.

Exporting to PDf reduces font size of one item only

I am using VS 2010 with the latest CR release. Within my crystal report I have a barcode (using IDAutomationHC39M) with set font size of 10. When I click on the "Export" button and choose PDF, all of the text stays the same except for the barcode which gets reduces to a font size of like 3 or 4 (its really tiny).
I can print it using Adobe PDF and the Barcode will stay the same font size of 10, but I want to avoid that if possible. What do I have to do to make the barcode export with the correct font size?

See if the KB [1218753 - Font size decreases when exporting or scheduling report to Adobe Acrobat (PDF)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733353333%7D.do] helps.
You will have to use it as a guide as it does not specifically address CRVS2010, but the patern is eh same...
- Ludek

Reduce font size in a document.

Hello guys. I've a bit of a problem here. So I have this document downloaded from the internet and I have to print it out but the problem is that it's text size is way too large due to which it is spanning over about 275 pages. Is there any possible way to reduce font size of certain elements which keeping their relative sizes? For example, headings should stay the same but paragraphs should be reduced to about 12px.
I'm using Acrobat X Pro.

PDF files were not meant to be edited in this way. For such large-scale
changes you'll need to edit the original source file, and then re-create
the PDF.

My 5s font size grows way to big all by itself and I can't reduce it.

My 5s font size grows way to big all by itself and I can't reduce it

Settings > General > Accessibility > Larger Text > Larger Accessibility Sizes [on] also, adjust the slider to the left/right to preference.

Reduced font size in browser

All of the sudden some of my text is showing up a point or two smaller in Safari and in FireFox.
The font is Arial and all of the text was created in text boxes.
Even on the same page some of the text will be the correct size and some will be a reduced size.
The pages were all created in '08 and I have not had the problem until just recently.
I'm stumped.
Here's the site: http://carlisleantiques.net
Check out the "Philadelphia Secretary" in "Conservation"
I have tried copying the text to the clipboard, deleting the text box, creating a new text box and pasting the text back in. But the text still gets reduced in the browser.
I have noticed that the text will often come up the right size and then a split second later it gets smaller. What's going on?
David

Well I seem to have been able to figure out what was going on.
I tried increasing the font size in one of the text boxes and was surprised to find that the font size actually got even smaller in the browser! What has solved the problem is increasing the size of the text box. I think the browser was trying to render the correct size but didn't have the room to make it the full size. This is clearly a bug in iWeb '08. You shouldn't be able to make the text box too small like that. I also changed the setting to keep the text in the middle of the box so that I made sure there was room top and bottom. It has solved my problem, and maybe it will help someone else who has text showing up smaller than it should.

How To reduce the font size In OAF page

Hi All,
am developing the Custom Online PaySLip
Client Want to take the PaySLip Page print In one Page
Now It Z exceed of two pages.
Please give me idea on reducing the font size
Thanks In Advance
t is a search page
based on payperiods it will shows the paydetails
I have taken 5 advance tables for pay details information
and Item styles are Message Style Text
CSSStyle csNum = new CSSStyle();
csNum.setProperty("font-size","8");
OAMessageStyledTextBean Payperiod = (OAMessageStyledTextBean)webBean.findChildRecursive("item36");
Payperiod.setInlineStyle(csNum);
I write the code like this, but it reduce the font size not column size,i want reduce the column Length
is there any possibility?
there is any another way
please give me ur Suggestion
Thanks In Advance
Edited by: user641204 on Sep 19, 2008 4:55 AM

It is a search page
based on payperiods it will shows the paydetails
I have taken 5 advance tables for pay details information
and Item styles are Message Style Text
CSSStyle csNum = new CSSStyle();
csNum.setProperty("font-size","8");
OAMessageStyledTextBean Payperiod = (OAMessageStyledTextBean)webBean.findChildRecursive("item36");
Payperiod.setInlineStyle(csNum);
I write the code like this, but it reduce the font size not column size,i want reduce the column Length
is there any possibility?
there is any another way
please give me ur Suggestion
Thanks In Advance

How to reduce the font size of message composer in...

Hi buddies,
Please suggest me how to reduce the fontsize of my Nokia 6030's message composer .

normally if the phone supports font, the settings can be found under :
Menu >Messages > Message settings > Other settings > Font size.

How to reduce the font size of the title of grid ALV without using OOPS

Hello
i have a title which i have displayed in a grid layout using this code
DATA: GRID_TITLE TYPE LVC_TITLE.
GRID_TITLE = 'FACTORY OVERHEAD '
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
I_GRID_TITLE                      = GRID_TITLE.
Now i would like to reduce the font size of the text which is displayed "'FACTORY OVERHEAD '.
how do i do that,i am new to abap.
Thanks

Hi,
Set the font size to your requirement
Go this below code.
CLASS ZCL_GUI_ALV_GRID DEFINITION INHERITING FROM CL_GUI_ALV_GRID.
PUBLIC SECTION.
    METHODS TITLE_SIZE.
PRIVATE SECTION.
ENDCLASS.
Then use the above method in the Implementation part as .
CLASS ZCL_GUI_ALV_GRID IMPLEMENTATION.
METHOD TITLE_size.
    ME->SET_TITLE_SIZE( EXPORTING SIZE = 1
                        EXCEPTIONS ERROR = 1 ).
ENDMETHOD.
ENDCLASS.
Now when your reference variable should be
Data :GRID type ref to ZCL_GUI_ALV_GRID.
and Create the Object as
CREATE OBJECT GRID
           EXPORTING I_PARENT = G_CUSTOM_CONTAINER1.
Before Calling Set_table_for_ first_display, Call the created method
CALL METHOD GRID->TITLE_SIZE.

Font Size & Leading Reducing

Similar Messages

Maybe you are looking for