Font sizes between Photoshop and Edge - Any Accurate conversion table?

I have been trying to make sense of the font sizes between Photoshop and Edge. It seems that the conversion tables I have found do not actually give the right numbers and I am wondering if there is a table from Adobe that would make it easy to have the right size rather than an approximation.
I prefer to use text in Edge rather than Photoshop for many different reasons one being dynamic text.
For example a font in Photoshop in a 780 x 475 image is 8pt - In Edge, according to conversion tables it should be 11 px but it is totally wrong. It needs to be closer to 30 px to be about the same.
So, Adobe Team, any documentation on that?

By the way, I have to correct the numbers but they still do not make too much sense. The artist gave me a 300 dpi file so of course the px size what wrong. After converting the file to 72 dpi, the font size happens to be 33.33 pt or 40 px which is now way too big in Edge. It looks like the size my just be the same 33.33 pt would be 33.33 px. Is this correct?

Similar Messages

Font size with Photoshop and Dreamweaver

Hi everybody!
I design my mockups in Photoshop and then copy them over to DWCC with hand code and slicing images. It is perfectly fine accuracy wise because I measure everything out. One thing that I am having issues with would be fonts. For example, I insert a text box in PS and start typing. When I set the font size to 12pt, it is rather large. So, in DWCC when I am typing out the same text and set it to 12pt, it is not accurate. The size in PS is much larger than it is in DWCC. Am I missing something? Thanks a ton.

PT is a print size. There's no reason to use PT fonts on the web unless you're building a print style sheet that will determine how text is printed on paper.
On the web we typically use screen fonts in %, em, rem or px font sizes. If you're building a responsive site, start with %. 100% = the browser's default font size which in most cases is about 16px.
Nancy O.

Different file size between Photoshop, and finder/explorer?

I posted this discussion last week http://forums.adobe.com/message/5820325#5820325 and have now determined that some part (still don't understand how/why) of my scanning/saving workflow- is creating a new layer "Layer 0" to replace the locked Background layer. This is causing the image to double, or triple in size. However, upon opening the image in Photoshop, the size of the image doesn't match the size viewed in finder, or Bridge....Does anyone know why?
23mb in Photoshop.
44.81mb in Bridge.
44.81mb in Finder
EDIT: There is only one later in this image. No image edits, except for cropping. You can see in the last image, how using an identical workflow, some images are saving correctly (20ish mb) and some are double.

Assuming you are deleting the spurious Layer 0, have you also then flattened the image before saving to see if that makes a difference?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How can i increase the font size on Safari and email so my mother who is legally blind in left eye, right eye 50% vision. r there any apple product specifically for the blind?

how can i increase the font size on Safari and email so my mother who is legally blind in left eye, right eye 50% vision. r there any apple product specifically for the blind?

From the Safari menu bar click View > Zoom In or press Command + on the keyboard to increase the size of the page.
If that doesn't help, open System Preferences > Accessibilty > Settings then select Zoom on the left.
You can also increase the resolution on the dislplay. System Preferences > Displays > Display > Scaled
You can also get help by posting in the Apple Support Communities > Vision forum here.

Dynamic link between Photoshop and Flash Catalyst does not exist

Hi,
I'm a french developer and I have a question.
I didnt find any Dynamci link between Photoshop and Flash Catalyst.
Let me explain :
I have a photoshop file (.psd) and I import it into Flash Catalyst.
But I have some modification to do on my design file (psd) but the design does not update himself in Flash Catalyst .
Do you plane to add the possibility ?
Thanks a lot !
Clement
http://www.dator.fr

Given that you named the class TextDynamicLayout, it implies you are trying to handle wordwrapping text. That requires handing down the VBox's explicitWidth to the Text controls before they get measured. Wordwrapping text can be any size so it needs to have its width fixed in order to determine its height.
The List classes do not support percentages on the renderers. All renderers are effectively given a size based on the List's size (or DG Column size). You can see how explicitWidth is handled in the default renderer by looking at the source for ListItemRenderer.as.
Note that VBox or any container makes for heavy and slow rendering. That's why the default Flex renderers extend UIComponent and have custom measure() and updateDisplayList() methods.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How to change font size in smartform and set layout of smartform

Dear abapers,
I want to change font size in smartform and also set the layout of smart form how can we do this.
Thank you sir.

Hi,
you can do it first you need to goto smartforms tcode there click on radiobutton 'Style'.
Give any name and click on create. Right sideyou can find character format right click on it and create a node .A pop will raise gve a 2 characterlike z1 or a1 etc click on font tab gve size and font style and click on save and activate. Use this style in your smartform you can apply what ever styles created in styles you can use it in your smartform by that smartstyle name.
When we create text in output options give your smart style name and click on general attributes . Select your text and apply the style what thse size it should be and what the font style it should be.
Goto smartforms tcode and select formpainter in application bar set layout according to your requirement.
Thanks,
venkat

How can I better improve the color of images between Photoshop and Premiere?

I have trouble getting true colors between Photoshop and Premiere CS6.
What can I do to solve this situation?

Premiere Pro works internally with colors in an RGB (red, green, blue) color space. If you want to edit video clips you create in Photoshop in Premiere Pro, create the clips in RGB.
If you want to broadcast the final movie it is best to ensure, in Photoshop, that the colors in your image are broadcast-safe. Assign the appropriate destination color space—for example, SDTV (Rec. 601)—to the document in Photoshop.
You can refer to some suggestion as below:
http://help.adobe.com/en_US/premierepro/cs/using/WS6693F22C-C06E-431a-A634-62343C65BA7B.ht ml#WS4AF3A4A1-D276-4f3b-A5B2-D3C19D3269DA
Let me know if you have any more questions on this.
Cheers!
Mandhir

Slow swapping between Photoshop and Illustrator

I have had this issue for a while now where it takes forever to swap between photoshop and illustrator, even if nothing is on my clipboard. It also seems like it takes forever for photoshop to display its UI no matter what program I am working in prior to clicking on it on the task bar. Once I am in the programs, they run fine until I try to save or print, at which point to slow to a crawl again. It wasn't always like this, but I had to do a system restore a couple of weeks ago to fix a bad boot file, and now the programs run like crap. I have noticed that the person who worked here prior to me never uninstalled the previous versions of Design Standard. So I am just tyring to figure out a way to speed things up because this should not be going this slow.
My computer specs
Windows XP Professional
2.83ghz Quad Core Intel Processor
4GB RAM (tech under since XP pro only supports 3.3)
GeForce 9800 512MB Vid card
All my drivers have been updated and I did a registry cleaner which did not fix the problem. So any help would be greatly appreciated!
Thanks

Imo, you should establish a rather strict
color management strategy (examples):
1. Define in Photoshop:
RGB: AdobeRGB(98)
CMYK: ISOCoated
Gray: Black Ink ISO Coated (Custom profile)
Spot: Black Ink ISO Coated
2. Distribute this profile set by Bridge
3. Convert RGB images in Photoshop to CMYK
4. Define Color space in Illustrator as CMYK
5. Open the Photoshop file or the Tiff file in
Illustrator: here it looks as expected.
Problems: the CMYK file contains an ICC-profile
which is different to the global CMYK-definition.
Now it depends on the CMS strategies, and that's
the point where I'm usually giving up.
Best regards --Gernot Hoffmann

How to increase the width size between PROMPT and TEXT BOX?

Hi Gurus,
my page having MessageTextInputs. Normally page runs displays the Prompt name and one text box will displayed.
my requirement is
1) how to increase the width size between PROMPT and TEXT BOX?
2)prompt name displays like
elephant
xxxxxant
xxxxRose
here xxxxx indicates SPACE
but my client requirement is don't displays the SPACES in left side.
so our requirement is in page PROMPT displays like
elephant
ant
rose
How to achieve this plz help me
its very urgent
Thanks

Hi,
Create a table layout region and under that use 'messageStyledText' for displaying the prompt and use 'messageTextInput' for text field without giving any prompt to that.
--Sushant

After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting new glasses!! Also the backlight on the iPad isn't as bright as before. Any ideas?

After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting a new pair of glasses! Also, the backlight on the iPad isn't as bright as before the upgrade, any ideas?

Hi Zak, thanks for the reply.
The filename is whatever is set to be the background fill of the site (I presume the desktop background fill, if mobile versions are set to be different). I've tried a number of different files, sizes and types/formats and the result is still the same, so as far as I can tell it's not the file itself causing the issue...
It uploads all pages (desktop, tablet and phone versions), .css files and .html files, and even the favicon .ico file but then hangs on the first image file, which incidentally is the background fill image.
The total number of files is said to be 154. It gets stuck on file number 24.
Yes the "Resume" dialog appears and upon clicking it just attempts to continue from the hang at the first image file (apparently 66% of the way through).
Re: the "BC site has changed" part - I thought as much but figured worth reporting.
... Incidentally, as I've written this reply, I left the "Resume" dialog open (ie neither clicking "resume" or "cancel" and just as I've finished typing it appears to have published the site successfully?!! (I must've left it for roughly 5 minutes)
Bizarre behaviour... I'm not sure if this will repeat itself with other sites but I'm sure there's a bug here that needs looking at regardless...?!
Any thoughts?

Applet font problem between linux and windows

I just want to share my experience in several project i've taken part.
In some projects, where all are developed under linux environment (suse 9.2),
we use jasper report for report generation and use the web applet for our clients to print.
They print ok in linux env, with the netscape 7.1, courier 10 font and jvm 1.4.2_06b version.
But when accessed from windows env, with the same browser and the same jvm version, the applet and the print out are different from those of lin env. The headers and footers are missing. When the we edit/lower the header and footer size at the jasper report file, then they appears @ the window env.
So strange that the font handling between win and lin differ (still my assumption). I'vent been able to solve this problem totally since the client must stick with one OS else the print out will be different.
Quite dissatisfied, coz i really think i could code once the report and run it anywhere in the applet and behaves in the same way.
Could anybody help ? T-T
Regards,
Albert Gan

hi!
this is my first post and i would like to ask if how did you create the web applet printing. im totally new to java and i dont know where to start.
i hope that you can guide me or give me some instructions. thanks in advance =)

Can't get Camera Raw widow to open between Photoshop and Bridge.

Okay, so I can't get the Camera Raw editing window to open between Photoshop and Bridge on my new computer. I used Migration Assist and synced up all files from my old computer, and the Camera Raw setting still works fine on my old Laptop. And even images that I edited/adjusted in Camera raw, they automatically pop up in Camera Raw on my new computer, but images that have not been openned in Camera Raw before, don't automaticlly open in Camera Raw editing window?
How do I fix this so that all images open through Camera Raw window before in Photoshop??

What kind of file format, raw or JPEG? If JPEG then you'll need to set your Camera Raw Preferences correctly to have JPEGs open in Camera Raw.

Camera differences between Photoshop and Photoshop Elements

Does photoshop elements support RAW in the same way as the full programme does through Bridge?
Message title was edited by: Brett N

Here are the documented differences:
Adobe Camera Raw differences between Photoshop and Photoshop Elements
More info about Elements raw support can be found here:
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?

Difference between photoshop and illustrator effects?

Under the effects menu in cs5, what is the difference between photoshop and illustrator effects? when do you use the photoshop ones?
Thank you.

The Photoshop effects are copies of similar effects from Photoshop. As such, they can only be applied to raster art, such as that edited in Photoshop. When you apply a Photoshop effect the Illustrator art you apply it to is rasterized in the background and the effect is applied to the rasterized version of the art. If you expand the appearance of anything with a Photoshop effect on it it will be rasterized. The other effects retain all or part of the vector art. When you expand the effect or save a PDF at least some of the original vector art will remain as vectors, although some effects (Drop Shadow, Blur, Feather, Inner Glow, etc.) to add rasterized art to the file.
The rasterization is non-damaging, in that the original vector, type, or other objets remain fully editable. If you remove the effect the rasterization goes away. There is no dialogue for rasterization resolution in the effect; you set that in Effect > Document Raster Effect Settings.

Font sizes between Photoshop and Edge - Any Accurate conversion table?

Similar Messages

Maybe you are looking for