Font sizes for message change when  mailbox or message list is changed

When changing the preferences for message font to something a bit more readable (ie, 14 pt), that doesn't seem to actually affect the message font size except on the message I am actually looking at at that instant. It always reverts back to size of the message list font!
How do I get the message list to be smaller (ie 10 pt) and the message font to be bigger (ie 14 pt)? Changing the prefs doen't seem to do it.
1.33 ghz 15 Alum G4 PB, 350 mhz G3 iMac, 2 ghz Dual G5   Mac OS X (10.4.8)  

Thank you very much for sharing that information.  It is great to hear verification that the mask assignment change did resolve your problem.   That is the latest resolution that TAC has recommended, but we have to restart the WCCP service on all redundant edge routers to be able to implement this, so planning the outage window is taking some time.   We've been told that TAC will set this up in a lab and test for us by our Cisco SE.  We're hoping to get verfication that this actually resolves the problem before we take the outage.   
     If you could, can you tell me if this resolved the issue 100% or do you still have any performance issues when making a change to your WCCP ACL going to your bluecoat equipment?    We may also need to implement this in our redirects to BlueCoat from our Nexus.  Do you happen to have a link to how to make this change in Bluecoat?   Thanks again!

Similar Messages

  • Change Font size for Line printer when Printing ALV

    We are using device type IBM 64xx LP+ emulation 1.00A to print to an IBM line printer.
    I would like to change the font size of an ALV report I am sending to the device.
    Can the font size be set in the Printer Initialization section of the Format?
    Ex. I am using X_65_255
    What/Where can I add the font size
    Set to P-Series Emulation (SSCC P 0)
    \0x1b\0x7c\0x7d\0x3b\0x50\0x30
    Emulation Reset                               (SFCC @)
    \0x01\0x40
    Character Set = IBM PC, ASCII, IBM PC(0850)   (SFCC l 0 0 1)
    \0x01\0x6c\0x30\0x30\0x31
    Print Mode/Pitch Selection = DP Quality, 20 cpi
    \0x01\0x7c\0x7d;Sxxxxx;0;0;xxx;0024;0048
    Line Spacing = 6 lpi                          (SFCC 2)
    \0x01\0x32
    Forms Length Set = 66 lines                   (SFCC LINES;66 <CR><LF>)
    \0x01LINES;66\0x0d\0x0a
    Thanks,
    Mike

    You will find the P-series emulation here: [LinePrinter Plus programmer's reference manual|http://www.printronix.com/WorkArea/downloadasset.aspx?id=4546] (printronix doc)
    You don't have many options with P-series. Maybe it's better to choose another emulation, and get the IBM 64xx programmer's guide.

  • Change font Size for Lock Screen Message

    In system preferences Security & Privacy you are able to set a lock message for the lock screen. Is there a way to change the Font Size or even the color of the message in Mavericks?

    I was able to set the font size for all the text on the envelope by pressing the Set button for the font. The size is on the right side of the dialog box. If it is not working for you, try choosing another font, and then going back to the one you want.

  • "Preview," how to change font size for when you "fill in the blanks" in a pdf file?

    In the pdf reader, "PREVIEW,"
    I specifically want to find out how to change the font size for "fill in the blanks" information. They're usually huge and i just simply want to make them smaller. 
    As a complete aside, is there a keyboard shortcut for being on google chrome or safari, then immediately opening the window for "preview." I'm typing notes out on preview while listening to a video lecture on my web browser, usually chrome, and i'd like to switch back and forth.
    Thank you, I'd greatly appreciate any advice.

    HI Velders,
    Can't answer your first question but can offer some information regarding your 'aside.'
    Command-tab will move the focus to the most recent previous application. If repeated, it will step through the pen applications from most to least recent. In your described case, you could use command-tab to toggle between Preview and Safari.
    Command-~ runs you through the open windows in the same application. As with command-tab, the steps are from most to least recent.
    Regards,
    Barry

  • How does one change the font size for folders and/or file lists in the Bookmarks Library?

    How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
    Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
    As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
    With regard to font size,
    1. there is no “Edit Bookmarks” or like option to edit the list in this version
    2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
    3. expanding the browser window has no effect on font size
    4. “Preferences” settings for font size has no effect in that window either, including advanced settings
    5. “Help” offers none that I can find.
    Can any of you Help?!?

    Maybe this extension helps:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • How to change font size for certain domains in Safari

    I want to increase the font size for a few websites that have font's sizes I can't read. I already use a CSS file that changes my link colors so I can modify that files if that helps.
    Here's a website I need to change http://www.boxofficeguru.com/weekend.htm. Whenever I go to this page I have to increase the font size and when I go to a different site I have to make the font size smaller. Any ideas?

    If there are really only a few sites that you have problems with, just go to the site, and click the Command key along with the plus key.    This will temporarily increase the size of the type. 
    Command and the minus(-)  key makes type smaller.  These commands will work on a per site basis.
    You might also want to check out the "Posts Like This" list to the left. >>>>>>>>>>>

  • How to change font size for tracks in Songs view, iTunes 11?

    I'm wondering which field in TextStyles.plist for the new iTunes 11 (I've gotten rid of Helvetica for Lucida Grande thanks to another forum on here!) - controls the font size for track title, time, artist, album, etc. as seen here - I would like to have it smaller, and have been playing around on several forums and not found the magical field to get that exact thing smaller. Many thanks in advance.

    You're going to love me forever:
    <key>9002</key>
    <dict>
    <key>- loc hint -</key>
    <string>List Contents (Small)</string>
    <key>font</key>
    <string>HelveticaNeue</string>
    <key>size</key>
    <integer>12</integer>
    </dict>
    It's that interger "12" that's determines the size. Adjust it until you're happy—provided that it's an interger.
    I actually go with "HelveticaNeue" with a size of 11. I like to see lots of tabular information at once, horizontally, without changing my resolution… within reason, e.g. Fiona Apple album titles still have ellipses.
    An unfortunate aspect to this is that the row height isn't altered unless the font size specified is greater than 12—the font takes the row height along for the ride when it's bigger, but the row doesn't come along for the ride when the font gets smaller. It's likely you could change the minimum row height to be lower, in some other plist—search for something like "list contents (small)" or "list (small)" or whatever—but I don't know where that would be found, or if it could be found at all.
    Nonetheless, this should address your query.

  • Changing font size for motorola droid's emails

    Hi, is there a way of changing the font size with the motorola droid, when working with emails? The emails font seem a bit small. a Little hard to read. I'd like the font to be larger.
    Thanks.

    I tried Spare Parts, because I have the same problem with the font size on email - way too small for these 50-year old eyes.  It does not work on email.  In fact it says in the Spare Parts menu under Font size "this only works within this screen."  I'm using an LG Ally, BTW.
    Any other ideas for increasing font size for emails? 

  • How do I change the font size of a document when I PRINT?

    How to I change the font size of a document when I print it?

    To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
    First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
    Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
              - Dov

  • What is the best font size for text when making a book in iBooks Author? My present font is Baskerville at 20 pt.

    What is the best font size for text when making a book in iBooks Author? My present font is Baskerville at 20 pt.

    For what audience? What reading level? Which Flesch-Kincaid index? What type of content? How much white space? What language(s)?

  • Change sub font size for TV

    hello every body !
    how to change subtitle font size for Tv toshiba 24ps10v !
    thanks !!

    You'll need to contact Toshiba in your region. That doesn't appear to be a US model, and this site only supports the US.
    - Peter

  • How to change font size for lyrics for Ipod in the IPad 2?

    Just bought an IPad 2 and need to increase the font size for lyrics I have added to ITunes/IPod. Is there a way to do this or an application that will do it?
    Thanks in advance for your help!

    Nope. Sorry.
    http://www.apple.com/feedback/ipad.html
    -SM

  • Change font size for {module_shoppingcartsummary} display

    This is probably really simple, however I have defined a font size for a header in which I have placed the {module_shoppingcartsummary}.  All items in the header dsiplay as reflected in my defined font size witht the exception of the displayed results for this module.  How can I get the results for this module to diplay correctly?
    Thank you.

    Hi,
    Look into your system CSS files (either modulestylesheets.css, etc) this can easily be found using Firebug. 
    In my example it's located in the all.css file under .cartSummaryItem. 
    Another example showing in modulestylesheets.css
    Hope this helps!
    -Sidney

  • Change Font Size for Table Column

    Hi,
    How can we set different font sizes for table columns?
    Thanks,
    Uma.A

    Hi
    Set Design property of table column
    Aslo check this link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/66/18b44145143831e10000000a155106/frameset.htm
    Thanks

  • Is there a way to increase the font size for the "songs" and "artists" lists in the new music app for iPad 2 (iOS 5)? It is too small for me.

    Is there a way to increase the font size for the "songs" and "artists" lists in the "music" app for iPad 2 (iOS 5)? It is smaller than the previous version.

    falkner09 wrote:
    is there really no fix for this?
    It would depend on your definition of "Fix"
    Your iPod touch running OS 4.2 has a ZOOM feature which will enable you to see the screen more clearly.
    To turn Zoom on or off got to:
    Settings > General > Accessibility > Zoom and tap the Zoom On/Off switch.
    _To Zoom in or out_:
    Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
    Increase magnification: With three fingers, tap and drag toward the top of the screen (to increase magnification) or toward the bottom of the screen (to decrease magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t lift your fingers on the second tap—instead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger.
    _Move around the screen_:
    When zoomed in, drag or flick the screen with three fingers. Once you start dragging, you can drag with a single finger so that you can see more of the screen. Hold a single finger near the edge of the display to pan to that side of the screen image. Move your finger closer to the edge to pan more quickly. When you open a new screen, Zoom always goes to the top-middle of the screen.
    _Large Text_:
    Large Text lets you make the text larger in alerts, and in Calendar, Contacts, Mail, Messages, and Notes. You can choose 20-point, 24-point, 32-point, 40-point, 48-point, or 56-point text.
    Set the text size: In Settings, choose General > Accessibility, tap Large Text, then tap the text size you want.
    I hope this has helped a little - other than this option I think it pretty much is what it is.
    BTW - This information can be found on page 208 of the iPod Touch iOS 4.2 Users Guide.
    Best wishes..
    Ricky

Maybe you are looking for