Font that showed in ID CS3 missing in ID and AI CS5

I just opened a file I probably last worked on in ID CS 3. It uses a little-used common domain (maybe?) font called Classic Typewriter.
The file opens and displays fine in CS 3; but, the Regular weight is missing in CS 5. ClassicTypewriter is displayed as the font name, but Regular is surrounded by brackets in the style; i.e., [Regular] . I believe that means ID cannot find the font.
What gives? Why is it okay in CS 3 but not CS 5?
Just checked, same is true for AI, as well. I further checked the font with Apple's Font Book Validation. There is a message about an error with "name" usability. So, I guess my only question now is why Adobe changed things so that a font that worked in CS3 no longer works in CS5 whether or not the font is totally okay. (The font also seems to work fine in TextEdit.)

Yes! That worked for me, too! Sure was hard downloading the font, though. It unstuffed with Stuffit Expander 8, but not Stuffit Expander 11. Go figure!
Thank you! (But, I sure do like the kerning in the Elsner + Flake headline version, at least for headlines. It's really nice! (Funny thing about the E+F version, though...I bought two weights in the same font family, but they do not appear grouped as a family; each font is displayed as distinct font families in the ID font menu. But, I guess that is a bit off topic.))
Thank you!

Similar Messages

How do you delete songs from Itunes? I have many that show up as many as 7 times and itunes will not allow me to remove them.

How do you delete songs from Itunes? I have many that show up as many as 7 times and itunes will not allow me to remove them.

I have tried to Hilight them and hit Control Delete nothing happens. I tried to just Delete one, but when you hit delete nothing happens.

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
Connection Bus : USB                                                               Write Status : Read/Write
Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

Hello,
I have just experienced the same thing!
Although my external drive shows in Disk Utility, it does not show in Finder.
And the Verify/Repair buttons are also greyed out.
Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
I was wondering if you solved your problem, & if so, would you share your solution.
I´m afraid to Erase in case I lose all my Data on the drive.
Thanks in advance for your reply!

How can I delete an Invitation from March that shows as new/unanswered in my calendar and there is no ability to scroll to address availability? iPad 3 5.1.1

how can I delete an Invitation from March 2012 that shows as new/unanswered in my calendar and there is no ability to scroll to address availability? iPad 3 5.1.1

Thanks!
Another question: If @me.com and @icloud.com are interchangeable, is it possible to delete the @me.com address? (would like to de-clutter and avoid confusion in the future)

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?
I've completely uninstalled iTunes per the support instructions and reinstalled. But I still get the error message each
time I click on the iTunes icon. I went into iTunes support and searched for registry settings and got an error message 404.
It was no help.

Hey JWeaver208,
Thanks for the question, and great troubleshooting so far. If you continue to see this message after uninstalling and re-installing iTunes, you may need to install the device filter in the Windows registry, as outlined in this resource:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Thanks,
Matt M.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

Examples of old fonts that could cause AI CS3 to get unstable?

I keep hearing this idea that old fonts can make AI unstable.
It is an interesting theory, and one which could explain various things I've seen, but it is so vague that I don't know what to think about it.
What are some examples of actual old fonts that would be real demonstrations of this idea? Are they all PostScript Type 1 faces? All released by Adobe prior to 1990? Any info at all?
I would nominate the original MyriadMM typeface. I don't have it installed anymore, but someone might. But this is too obvious of a "is not supported on a modern Mac" case. I'm thinking if this theory is real, the example will be something like the original AvantGarde version 1 PS face from 1987 (or whenever).
envelope

Any old fonts can make any modern application unstable, particularly Adobe apps.
Fonts have updates too as have applications. Fonts were not coded in the same way years ago as they are today and there were restrictions as to how many fonts could be in a font suitcase and how many characters could be in a font itself. There were also restrictions on system and operating system level that made that neccessary then.
A lot have changed over the years and font technologies have evolved a lot and changed too.
You mention a MM font (Multiple Master). MM fonts are no longer supported on systemlevel and/or in applications even though old documents that use them can show them even though the specific features that an MM font contains are no longer supported or can no longer be used (had to do with sclability and swashes).
Fonts that have been around for a long time also tend to have been moved in parts between both users and font suitcases, sometimes not even living in the originally named suitcase (to get around restrictions of number of installed and active suitcases at the time) and might also have lost its postscript parts.
It doesnt't matter if we are talking about type 1 or 3 or bitmap fonts, or truetypes or commerical ones or free ones. If the fonts are old, they can misbehave for many reasons. If an installed font has been through numerous crashes (applications, system, documents etc) also the font can have got hit and got damaged. That's why you need to check the health of your fonts regularly, and hve your original fonts safely on a disk or backup so you can reinstall it if it starts to misbehave.
Nowadays you can check fonts for damage with FontBook that comes with the system, or with one of the font managers.
Then there are the badly created fonts that pop up now and then too and therefore create problems. But that is another story.

I'm missing a font that I shouldn't be missing: Avenir Next.

On Apple's list of fonts that should be included on OS X, it lists Avenir Next. However, when I look through my font book, I can't find it at all.

Not sure what list you're looking at, but no version of Avenir is included with Lion. Those weren't part of OS X until Mountain Lion.

What is the black text box that shows inthe upper right of my screen and how do i get rid of it permanently?

what is the black text box that shows in the upper right of my screen and how do i get rid of it permanently?
== every time i open a page

Please provide a screenshot of that.
[https://support.mozilla.com/en-US/kb/Adding+screenshots]
http://www.wikihow.com/Take-a-Screenshot-in-Microsoft-Windows

Problem with CS3 InCopy text files and InDesign CS5

I have a large annual magazine that I am developing. There is one section that doesn't change much from year to year and I was hoping to grandfather in the InCopy text files from last year's edition. I've successfully used this strategy the past few years without issue. However, now when I try to check out those text files from last year, I receive the following message "This story needs to be coverted to "InCopy Document" format in order to edit it."
I am running both InDesign CS5 and InCopy CS5 in SL 10.6.4. The previous year's magazine document was in CS3 InDesign format and the text files were in InCopy CS3. Is there some sort of compatibility issue? Is there a specific method for converting them so I can check them out in InDesign? I haven't attempted to check them out in InCopy CS5 yet but I will try that next. But I really need the ability to check out the content via InDesign too.
Thanks in advance.
Robert

AFAIK, you're going to actually need to open the INCX files in InCopy and then resave them as ICML file. You can then relink them all in InDesign.
Other choice is killing the InCopy links and then relinking everything.
Best practice would be to finish any job started in CS3 with CS3 and then move to CS5 with new projects.
Bob

I am looking for a timer that shows elapsed time since a particular date and time. Showing days, hours, minutes etc.

I would like to download an application for my desktop and maybe even my iphone that will tell me how many days, hours, minutes, etc have elapsed since a particular date.
For example, my brother just had a baby and I want to put that date and time into the app and then determine how long it has been since that date and time.
Hopefully this makes sense, because I have not been able to locate anything.
Thanks in advance,

This is fantastic. Thank you.
Is there any way to have something like this displayed on my desktop showing the time as it ticks away?

HT3180 I owned an Apple tv and after upgrade my internet to higher speed my Apple Tv does not work the only message that show on the screen said if time and dates are not found go to apple/support/tv tried almost everything and nothing. Please somebody

I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.

In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

Adobe fonts not showing up in Photoshop

HI,
I am running Windows 7 and I noticed that many open type fonts that show up in the font list in Word do not appear in Photoshop CC, specifically the Adobe fonts like Adobe Fan Heiti and Adobe Gothic. How can I get these fonts into Photoshop CC. Thanks.

That's the font family field (window)
In photoshop 14.2.1, did you scroll the font list about 3/4 of the way down?

How do I use a font that a user of my screen saver might not have?

I am trying to do a little experiment with fonts. I downloaded a font that was not previously installed on my computer, and am trying to make a "Hello, World!" screen saver with that font(which I installed).
The problem is that I can not even use that font. When I attempt to make a "Hello, World!" screen saver with that font, it uses the default font. Here's the code:
#import "saverView.h"
@implementation saverView
- (id)initWithFrame:(NSRect)frame isPreview:(BOOL)isPreview
self = [super initWithFrame:frame isPreview:isPreview];
if (self) {
[self setAnimationTimeInterval:1/30.0];
//either my mistake is here:
hylianFont = [NSFont fontWithName:@"Ancient Hylian - English" size:20];
attrs = [NSMutableDictionary dictionaryWithCapacity:2];
//NSForegroundColorAttributeName -- [Color green]
[attrs setValue:[NSColor greenColor] forKey: NSForegroundColorAttributeName];
// or it is here:
[attrs setValue:hylianFont forKey: NSFontAttributeName];
displayer = [[NSAttributedString alloc] initWithString:@"Hello, World!" attributes:attrs];
return self;
//... more stuff I do not use...
//simply draws "Hello, World!" in green at the top right of the screen.
//meant to draw it in the different font, but draws it in the standard font.
- (void)animateOneFrame
[displayer drawInRect:[self bounds]];
return;
@end
Where did I mistype?

I think I solved the problem. I just put the font and the screen saver in a pkg file, and make the pkg file install the font. Or I guess I could keep the font in my screen saver and test it that way. Either way, I found the answer.

How do I make a line graph that shows temperature readings taken on specific dates?

I need to make a chart of my wife's temperatures taken via ovulation thermometer. All I need is a line graph that shows the temperatures on the y axis and the dates the measurements were taken on the x axis.
What is the easiest way to do this? Please explain in detail as I have almost no knowledge regarding Numbers. Thanks.

You can construct a Line graph or a Scatter graph to display this.
The two are similar, but require the data to be set up differently.
A Line graph is a Category graph.
Each 'date' is a text value that names a category. The categories are equally spaced along the category axis. Measurements taken on day 1, day 2 and day 4 would be equally spaced with respect to the category axis.
Each temperature reading is a numerical value, and is represented on the graph by the distance it is placed from (and usually above) the category axis.
A Scatter graph has two value axes.
Each Date is a Date and Time value. The position of these values depends on the value itself. Measurements taken on February 1, February 2 and February 4 wound not be equally spaced. Along the Date axis, the space between the second and third dates would be twice as wide as that between the first and second cates.
Each temperature reading is a numerical value, and is represented on the graph in the same manner as in the Line graph.
Here's an example of each, using the same data set.
For the Line graph (left), the Category labels (dates) are placed in a Header column, and the temperatures in a non-header column,
For the Scatter graph, both the dates and the temperatures are in non-header columns. The Chart Inspector was used to Connect the data points with straight line segments, and the weight of these lines (and size of the data point markers) was increased to more closely match the weights and sizes in the Line graph.
Data on the graphs is not intended to have any similarity to temperatures measured for your purposes.
The construct the line graph:
Set up the data and labels as described.
Select the cells containing the data (column B in my case).
Click the Chart button and choose the Line Chart.
To construct the scatter chart:
Set up the data as described.
Select the cells containing the date and temperature data (columns A and B for mine)
Click the Chart button, and select the Scatter Chart button (third from the bottom),
In the Chart inspector, click the Series button, then set the Connection Points menu to Straight. Change the Data Point size yo 15.
Click anywhere on the line to select it, then in the Stroke section of the Format bar, set the line weight to 4 points.
Click on the box containing the dates (under the chart), then click the ruler icon in the Inspector to show the metrics inspector. Use the Rotate control to set the angle for the dates to about 75°.
Click on the label for this axis (Dates) and drag it to a position below the date labels.
Regards,
Barry

Font that showed in ID CS3 missing in ID and AI CS5

Similar Messages

Maybe you are looking for