Font Types
Hi There,
I'm a bit confused about font types. Here's the request I got from the printer.
"Fonts: Type 1 PostScript fonts recommended. True Type Fonts (TTF) do not output reliably. Do not use MM fonts."
If I select a font from Illustrator, am I selecting a Type 1 PostScript font?
How do I know what type of fonts are included in Illustrator? I've searched through Help, but to no avail.
Thanks,
CS
Hello to all of you,
Thanks for the answers. I apologize for not responding sooner. Internet connections here are hit or miss.
You've pointed me in the right direction and I appreciate that.
I also understand that there are extra fonts on the CS3 installation disc. I'll try those, too.
Thanks again,
CS
Similar Messages
-
How to Change the Font Type for Printing Pocket Address Book?
I am new to the Mac and was entering in my contact info into the Address Book in hope of creating a Pocket Address Book (PAB). When I attempt to print out the PAB the default font is courier. When I click on "set" and access other font types, sizes, etc., I can't seem to find a way to apply or save the font type that I choose. In short, it stays as courier. I found an archived thread in a forum that suggests to validate the font I want - which I did and it was already validated - and otherwise I cannot seem to change it from courier. Any help on how to get the font I select to be applied instead of courier would be GREATLY appreciated!
You can also change it using the UIManager:
UIManager.put("OptionPane.foreground", Color.red);
UIManager.put("OptionPane.messageForeground", Color.red);
For a complete list of all properties you can change for each component check out this program:
http://www.discoverteenergy.com/files/ShowUIDefaults.java -
How to change Font Type of the Title Text of a JFrame?
Hi,
I want to set a different Font Type for the Title text of the titlebar of my JFrame.
Is it possible? Can anyone show me how if it is?
Thanks.
NiteenMichael,
Thanks. It works!
But there was a problem. I was not using the :-
JFrame.setDefaultLookAndFeelDecorated(true);
so I have to use it now.
Is it possible to do it without the default decorated look and feel? Because the default LNF title bar has too much height and I am cramped for space.
I know that's no excuse. I tried but it doesn't work.. I am using a extended JFrame like this:-
class Testing extends JFrame
public Testing()
setSize(300,100);
setLocation(400,200);
Container container = getContentPane();
/* add components to this container here */
setVisible(true);
When I use getComponent() for the container, I get an ArrayIndexOutOfBound Exception.
When I set the argument to getComponent(0), the font in the title bar is not changed.
What else should I do?
Thanks.
Niteen. -
How to change font type of blog comment?
Hi All,
Is there any way to change the font type of the received comments on my blog entries?
BR: SzimiGo
LED >Mouse right-click> Create >>> Property Node >>> Label >>> Font >>> Name
then (or)
Numeric >Mouse right-click> Create >>> Property Node >>> Numeric Text >>> Font >>> Name
Regards. -
How to change font type of front panel indicator
Hello,
I want to change numeric indicator font type to LED style. I've got the font. But, how can I change the font type of Indicator independently, i.e. not by changing application font type. I've checked the Property Node available are only color, size, justification, but type.
Yoppy.
Solved!
Go to Solution.Go
LED >Mouse right-click> Create >>> Property Node >>> Label >>> Font >>> Name
then (or)
Numeric >Mouse right-click> Create >>> Property Node >>> Numeric Text >>> Font >>> Name
Regards. -
How do you find out what the font type is when you open a .eps file
I've been sent a logo in a .eps file and I need to edit. However I can't see what font type has been used!
Thanks ClaireClaire,
You may also try here,
http://www.identifont.com/
http://www.whatfontis.com/
Or ask in the Typography forum,
http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
Edit: Hi elDudereno. -
Illustrator CS5 for Mac. OS Yosemite 10.10.1 Font Drop Down show only font type icon unless I drag my cursor over an icon to reveal the font name and style. Fonts works great in InDesign and Photoshop.
j,
I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594 -
Error in Portal Navigation - Font Type, Size and formatting.
We carry through all the tips postadas in the SDN to solve this problem, however we the same have some different stations with problem.
We are using the Bi 7,0 Portal, and we are with problems in the layout: <b>Font Type, Size and formatting</b>, and WEB.
Somebody has some specific tip for this problem?
Regards,
Sbrissa.Hi Biroj, thanks, I´m check the error continues...
Thanks,
Sbrissa. -
Can we change font size and font type in reports
Hi All Technical/Functional Masters,
We are developing some transactional reports in ISU. this report has 20 columns to be printed. On screen, display is not a problem but client has a requirement to download this report in PDF format and wants to print on A4-paper in Landscape. Although we have managed to accommodate all the columns on A4 paper but have to compromise with font size that are very small and not visible. If we download the report in excel format we are able to maintain the font size 8 and accommodate all columns after little format but same in PDF is a problem.
Can anyone tell whether we can increase the font size and change font type(from SAP standard to 'Arial') before sending the output in PDF ? Is there any property or utility that can be changed or used for this purpose.Function Module : CONVERT_ABAPSPOOLJOB_2_PDF
Include : THSTXWFPL
for modify font size
decrease fontsze foncharacter will increase
fontsize = 120. <-- Change
fontsize = 100. or fontsize = 80
Depend on your logon lang. My case logon 'TH' or 2. I modified font ZCORDIA (refer CordiaNEW thai font)
if is_cascading is initial.
case language.
when '0'. "Serbian
font = 'COURCYR'. devtype = 'SAPWIN'.
when '1'. "simpl.Chinese
font = 'CNHEI'. devtype = 'CNSAPWIN'. cjklang = 'X'.
when '2'. "Thai
font = 'THDRAFT'. devtype = 'THPDF'.
font = 'ZCORDIA'. devtype = 'ZMTHSWNU'.
font = 'THANGSAN'. devtype = 'ZPDFUC'.
when '3'. "Korean
font = 'KPSAMMUL'. devtype = 'KPSAPWIN'. cjklang = 'X'.
when '4'. "Romanian
font = 'COURIER'. devtype = 'I2SWIN'.
when '5'. "Slovenian
font = 'COURIER'. devtype = 'I2SWIN'.
when '6'. "Croatian
font = 'COURIER'. devtype = 'I2SWIN'.
when '8'. "Ukranian
font = 'COURCYR'. devtype = 'SAPWIN'.
Add font Cordia Thai
SE73 --> Fon familia --> ZCORDIA
Load Font Cordia thai to system
SE38 --> RSTXPDF2UC
load CORDIA.TTF
SE73 --> printer font --> 'ZMTHSWNU'
Add ZCORDIA font and copy AFM Metric from = 'THDRAFT'. devtype = 'THPDF'.
Modify AFM
example
*----- OLD--
StartFontMetrics 2.0
sapFamily ZCORDIA
sapHeight 000
sapBold false
sapItalic false
StartCharMetrics 0183
WX 0500 ; N space ;
WX 0500 ; N exclam ;
WX 0500 ; N quotedbl ;
WX 0500 ; N numbersign ;
WX 0500 ; N dollar ;
WX 0500 ; N percent ;
WX 0500 ; N ampersand ;
*--NEW--
StartFontMetrics 2.0
sapFamily ZCORDIA
sapHeight 000
sapBold false
sapItalic false
StartCharMetrics 0183
WX 0375 ; N space ;
WX 0375 ; N exclam ;
WX 0375 ; N quotedbl ;
WX 0375 ; N numbersign ;
WX 0375 ; N dollar ;
WX 0375 ; N percent ;
WX 0375 ; N ampersand ;
Result : decrease space between character. Then Your PDF will have BIGGER FONT.
Rdgs,
Suwatchai -
StarOffice 8 - finding all different font types in a Writer file
Hello,
I am currently using StarOffice 8 on a Windows XP system.
I frequently transfer a large Writer (.odt) file between different computer systems as I constantly update the file with new information. As part of the updates, I use different fonts. As I install a particular font on one machine, this font may not be installed on another machine when I add new information to the file on that particular machine.
When I open the Writer file on a machine that has some font not installed, the WYSIWYG appears incorrectly (since the proper font is not installed on that computer, of course) but if you highlight the incorrectly-displayed info, it says what the font type should be (ie, "WP Hebrew David" font). I then go online to download that specific font type for this the computer. Then the data is displayed correctly.
When you have many, many different font types used in a file, it is hard to keep track of all different fonts used. Before anyone questions me on using so many different fonts in a file, it is important for my file to visually display the correct data, and this means using a quantity of fonts.
What I am wondering is the following:
Is there a way from within StarOffice 8 to scan a particular file and then let the user know every different font name used in that file?
That way, if the file contains a font which was used on another machine but not currently installed on the current machine -- when I am updating information in the file -- I can then see a list of fonts used and then install new fonts accordingly after checking to see if they are installed (by checking the Fonts folder in C:/Windows)
I hope this makes sense, or is it "clear as mud"?
Please excuse my bad English grammar as I am not a native English speaker, but have picked it up living in Canada for the last 20 years :-)
Cheers & thanks in advance for any help !
David
Edited by: Broad_Arrow on May 18, 2009 11:18 PMMay 20 2009
There is a Fonts Used macro writer_printAllFonts.sxw Further checking this is the wrong StarBasic macro. The one I use came from an OOo forum I think. I use it with SO7, SO8 and SO9.
It is at the end of this message. To install it:
[1] Copy the macro below to the clipboard
[2] Go to Tools>Macros>Organize Macros>Basic>Standard
Select New. Highlight what is there, paste, and close.
[3] Go to Tools>Customize>Menus>Tools
Highlight Word Count, then go to Add>Macros>My Macros>Standard>Module1
Highlight FontsUsed, Click Add, Close, Ok
Phil
REM ***** BASIC *****
Sub Main
End Sub
Sub FontsUsed 'Version 1 John Vigor 4/25/06
'List fonts used in Writer document. Appears to work in normal text,
'Sections, normal Tables, and Frames. Will currently crash on a Table
'within a Table.
oDoc = ThisComponent
Dim fonts as Integer: Dim aFonts(1)
oTC = oDoc.Text.createTextCursor
oTC.goRight(1,true) : CurrentFont = oTC.charFontName
fonts = fonts + 1 : aFonts(fonts) = CurrentFont
REM Do "normal" text.
partEnum = oDoc.Text.createEnumeration
PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
REM Do Frames.
oFrames = oDoc.getTextFrames
If oFrames.Count > 0 then
fonts = fonts + 1 : ReDim Preserve aFonts(fonts)
aFonts(fonts) = "NEW FONTS, IF ANY, FOUND IN FRAMES:"
For I = 0 to oFrames.Count - 1
thisFrame = oFrames.getByIndex(I)
partEnum = thisFrame.createEnumeration
PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
Next
EndIf
REM Prepare list.
For I = 1 to fonts
s = s & aFonts(I) & Chr(10)
Next
iAns = MsgBox(s,4,"FONTS FOUND. Create font list document?")
If iAns = 7 then
End
Else
NewDoc = StarDesktop.loadComponentFromURL("private:factory/swriter"," blank",O,Array())
oVC = NewDoc.CurrentController.getViewCursor
oVC.String = s : oVC.collapseToEnd
EndIf
End Sub
Sub PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
While partEnum.hasMoreElements
thisElement = partEnum.nextElement
If thisElement.supportsService("com.sun.star.text.Paragraph") then
portionEnum = thisElement.createEnumeration
PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
ElseIf thisElement. supportsService ("com.sun.star.text.TextTab le") then
Cols = thisElement.getColumns.Count - 1
Rows = thisElement.getRows.Count - 1
For C = 0 to Cols
For R = 0 to Rows
thisCell = thisElement.getCellByPosition(C,R)
cellEnum = thisCell.createEnumeration
While cellEnum.hasMoreElements
thisPara = cellEnum.nextElement
portionEnum = thisPara.createEnumeration
PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
Wend
Next
Next
EndIf
Wend
End Sub
Sub PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
Dim found as Boolean
While portionEnum.hasMoreElements
thisPortion = portionEnum.nextElement
thisFont = thisPortion.charFontName
If thisFont <> CurrentFont then
For I = 1 to fonts
If aFonts(I) = thisFont then found = true: Exit For
Next
If found then
CurrentFont = thisFont : found = false Else
fonts = fonts + 1 : ReDim Preserve aFonts(fonts)
aFonts(fonts) = thisFont : CurrentFont = thisFont
EndIF
EndIf
Wend
End Sub -
IC WebClient - Install Font Types Mail Forms
Dear All,
I hope you experts can help me out with the following issue:
With the IC_MANAGER business role it's possible to create/maintain mail forms. To do this, go to "Knowledge Management" in the left menu and after that select Mail Forms.
In here you can maintain your mail forms. I want to extend the font types. Now I only have the font types: Times New Roman, Arial and Courier. I want to extend thist list with 'Verdana'.
Does anybody know how this works?
Kind regards,
MaartenHello Maarten,
1. Upload the TrueType font through transaction SE73 in the backend system.
2. Maintain the table TBTFFONTMAP throught transaction SM30
Logon to the webclient and you should be able to use the newly installed font.
With kind regards,
Jeroen van den Berg -
Change font type/style of app.popUpMenu
Hi~~
I am using app.popUpMenu to show an array of items, in which there are some Chinese charaters but they are displayed as "..."
I guess the default font type of the popup menu cannot show these Chinese characters...
Is there any method to change the popup menu font type / style?
Also I tried to change the font of the textfield which populates the popup menu, but it doesn't work...
~~~~ thanks for any suggestions!hi radzmar~ thanks for your advice!
i tried but it cannot solve my problem...all the chinese characters can be shown correctly in the form except this app.popUpMenu
the chinese characters can also be shown in alert message box
any other suggestions >< -
Change font type in email messages
How do I change the font type in the messages I send through my email on my phone?
With the Mail App you cannot change the font.
-
Is there any way to bring back the font type and background of Safari Reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.
I agree with you, many things in the ios 6.x were more elegant. The reader was the most one of them. I think the ios7 wants to be the windows 8.
-
In SAP 4.6c In classical reports output how to change Font size and Font type
Dear Experts,
In SAP 4.6c, in classical and interactive reports output how to change font size and font type.
Regards,
Zaker.These are HTML formatting questions. Nothing to do with the Oracle SQL and PL/SQL languages.
With old-style HTML, the font size and family are set using the font tag.
With modern style HTML, that is done using cascading style sheets (CSS).
Your favourite search engine will turn up tons of information on both. -
I developed a report using Univers font size 12 but when the report server (OS = Linux 7.2) generate the report come out, the report is using Courier font size 12. The different in font type have give me much problem because the report layout is ruined. Any suggestion/solution??
Thanks in advance.Hi Chin
* Ensure that the font you used to develop the report exists on the Server system.
* Inspect uifont.ali to see if you have any font substitution for the font you are using in
your report.
Regards
Sripathy
Maybe you are looking for
-
SCIM no longer works after last package update
I just did the usual sudo pacman -Syu and now SCIM Pinyin chinese input no longer works: When I press the hot key to enable chinese input, it only shows "English/European" in the notification bar that pops up, and I cannot enter chinese characters. A
-
Issue while UNDELETE the PO line item
Hi MM Sapperu2019s, I am facing an issue where one of my user wrongly activated the deletion for 1 line item in the PO and now when I tried to undelete the PO line item it was giving me the below error, Error as Requisition XXXXXX, item XXXX, assigne
-
Objects on home page are "locked" together
I hope this is an easy fix but I can't find it.... I have 5 pages to my little website. On all of them except the home page I can grab a text box or a pix and reposition it. On my Home page I have a picture, a tiny text box. I'm trying to add a text
-
In Windows Server 2008 : Powershell can't import-module ActiveDirectory
Hi, Thank you in advance for any possible help. I am using Windows Server 2008 with a x64 machine and I have Powershell 3.0. After searching for similar problems, I found that I have to install the patches KB969166, KB968934, KB967574, KB968930. This
-
Creative cloud download stops at 42%
Hi can anybody help me ? creative cloud downloads stops at 42%, extracting and shows error Installation (7) OSX10.9.2 maybe someone has a tip ?