Font use in PS Elements

I'm a regular-Photoshop user with some questions about PS Elements.
1) A colleague needs to use a very specific font in a PS Elements file. As long as the font is correctly installed on her PC, will Elements 'see' it and allow her to use it?
2) Does Elements offer guides and pixel rulers on the edges of my file (like Photoshop), so I can position a text box with absolute precision?
Thanks!

Elements should show fonts that you install in Windows, unless you have too many fonts installed, in which case you'll need some kind of font manager.
PSE offers rulers but not guides. You can download free guides as add-ons from several places, but it's a quirk in PSE 6 and 7 that you can't move the guides once you set them.

Similar Messages

How to change the font size of text element in smartform

Hi
i want to know how to change the font size of text element in smartform
regards
Gincy

Hi
You can create Smartstyles, in which you can define paragraph formats for texts and character formats for character level changes.
Paragraph format ---> alignment, font size etc
character format for ---> superscript, subscript.
After creating, in your smartform, there will be a option in the text element to enter a style.
You give the created style and you can use the paragraph and character formats i that style.
Hope this is clear..
Regards
Sekar

Problem with adding Fonts using SE73

I have a requirement to add new fonts to use in PDF printing.
1) I have tried to add an MICR font using SE73 and I got the following message.
Error
Licensing: True Type Font must not be embedded.
Question: Is there any restriction on type of fonts that can be added to SAP?
2) I have tried a different font and added it successfully but I dont see the font in Font palette in PDF Layout.
Question: Is there any additional configuration to be done for the font to be visible in PDF - Font palette?
Please help.
Thank you,
Vasu

Hi,
Go to Character formate in your form.
create a new char formate with enable BAR code AND
you can give its type too.
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
a barcode printer
a barcode reader
a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.

What is the font used in firefox in Windows 8

hi
i want to know what font is used in firefox in windows 8 ?
this font is very good for persian characters
now i'm using windows 7 and i want to have font style like in windows 8
how can i change the settings

Is this a font in the user interface or on web pages?
You can right-click on a web page and select "Inspect Element" to open the Inspector (Firefox/Tools > Web Developer).
You can check the font used for selected text in the Font tab in the right pane of the Inspector.
*https://developer.mozilla.org/Tools/Page_Inspector

I installed a font (french cursive) into elements 11, and restarted but it's not showing up. It sho

I installed a font (french cursive) into elements 11, and restarted but it's not showing up. It shows up for other programs. What am I doing wrong?

Elements uses the installed system fonts. You install them in the fonts folder. On windows click the start button and type fonts into the search box to find the folder with all your fonts. If you downloaded the cursive fonts in a zip folder you musy first extract (unzip) the files and then copy or drag them into the fonts folder.
If you are still getting problems try downloading from the link at the top of this page:
http://www.specialeducationalneeds.com/accents/schoolfonts.html

I have been using Adobe Photoshop Elements 11 for two years. I got a new printer and installed it although I did not remove my old printer from my computer. I used this program and my new printer for quite a few months, but today I deleted my old printer

I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer. How can I make it find the HP printer?

Try this --
Go to the bottom of the link I gave you, and you will see
click that link and then click the chat button to talk to an Adobe agent

How can I change the fonts used in Yosemite

It would appear that Apple have gone out of their way to make OS X as difficult to use as possible with the change of fonts colours. To make matters worse it would appear we all have to adhere to the Apple accessibility rules if we want to change anything ! Guys, the world is more complex.
I don't have any visual impairment as such other than I'm in my 50's so i'm in that vari-focal time of life, which is normal. That means a bit more definition on the font helps - so I'd like to change the font & maybe the font size across the entire system. I can do that in M$ Windows !
I'd like to change the colours of the fonts used in some applications e.g.. Mail where for some completely mad reason Apple are using a grey font, on a grey background, a mustard font on a white background. MAD. What idiot comes up with this stuff & who signs it off ??????? Once again all this is easy to change on every other OS I've worked with (Solaris, Linux, Windows).
Now you might think that I'm Apple bashing, I guess I am in a way but I've been an Apple user for more than 15 years, I have iMac, Macbook, Macbook Pro, Macbook Air, 3 iPads, iPhone. I like the products but things are not as configurable as they should be. Just allowing people to click a couple of radio buttons to switch to different modes on the display DOESN'T cut it.

Too old to care now.

How to use the same element in different photoshop files?

It occurs to me often that I use the same element in different photoshop files, a header or footer shown in the example below. So when the footer changes in one document, I need to change this footer in every other single document.
Is there a possibility to use some kind of template, one single document, that can be placed in different files , which is still editable afterwards?
Thanks in advance.
I'm using Photoshop CS6

In a single document you can have several pages and these pages may have headers and footers that share smart objects. If you replace the contents of the an embedded smart object on one page page that is shared on an other page the pages you will see both pages contents are changed. For they share the common object. It is also possibly to have independent smart object layers. It depends how you create the layers in the single document.
Example one sharing a smart object hi-light a smart object layer and use menu layer>Duplicate Layer... This will create a second smart object layer that share a common smart object. Each layer has is own associated transform. Do it again and you will have three layers the share a common smart object. So you can use each layer associated transform to position and size the layers contents. Make a picture package for example. When you hi-light any of the three smart layers and you use menu Layer>Smart Objects>Replace Contents... all three layers contents will be replace with the new smart object. Care must be taken to replace the smart object with an identical size object for only the object is replaced the three associated transform for the three layers are not replaced or changed.
Example two independent smart objects hi-light a smart object layer and use menu layer>Smart Objects>New Smart Object via Copy. This will create a second smart object layer that has it own embedded smart object copy. Do it again and you will have three all have independent embedded smart object that are identical. However they do not have to remain identical. For example if the first smart object layer was created by using ACR to open a RAW file as a smart object layer the embedded object is a copy of the raw file and its associated RAW conversion settings. Double clicking on one of the smart object layers and you will see ACR open on its embedded RAW file with the embedded RAW conversion setting. Changing these settings will update the layer smart object content with new ACR setting and pixel when you click OK in ACR. Repeat for the third and you will find you have three different raw conversions in Photoshop you can mask and blend together to bring out detail.
I think what your missing is that a smart object contains a copy of the original object. Changing the original after creating a smart object layer in document will not effect the smart object layer at all. Its independant from the original having a copy of the original. Only changes to the smart object layer and its embedded smart object effect smart object layers.

Is it possible to replace fonts used in a PDF?

Hi. I have a PDF that was created by a third party. I contains a couple of fonts that are not available on my system, and for some reason they won't swap for other fonts. When I open the PDF I get the message "Cannot find or create the font 'WP-MultinationalBCourier'. Some characters may not display or print correctly."
Although the PDF looks OK to me, it won't print on the printer down in the print shop. (That printer is very fussy and will not print PDFs unless the font situation is perfect.)
I can't even tell where this font is used. It's over 500 pages, so I can't check every paragraph. I do not have access to the source files, and going back to the third-party (who created the PDF) is not really an option.
My question: Is there a way that I can force Acrobat to swap out the 'WP-MultinationalBCourier' font and replace it with some regular font? As in, on a permanent basis, so the print shop printer won't ever know that odd font was used?
Thanks
e
d

Hi Ed
I used to spend hours working out the same problems. There's good news and bad news. First though -- what version AA are you using.
Bad news is, unless you can get hold of the exact fonts used to create the pdf -- and then put them on your system -- there will not be much you can do, unless AA has vastly changed their procedures.
Even if you get the exact font and add it to your system, I am still not sure AA will "see" it, depending upon if the font was originally embedded into the pdf or not, when it was made. Logically, it would appear that if not embedded the program would recognize it on the system. But, unfortunately, this has not always worked for me and I do not know why myself.
Unless your required font is something like Hebrew or Chinese, the program will automatically replace your courier to the next likely (internally programmed) selection, so you will not notice any problems. (my experiences & problems were always with foreign languages)
You can replace a font or make a correction by blocking the sentence or word, then using your right-click context menu, then selecting Font, and making the replacement.
Perhaps the best way would be so save the file as another .doc file and start all over again, but with the font your printer will accept?
Is that an option?
let me know.
BarryG

Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.

Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4 I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4
I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their font spacing! which distorts the look of the Text that was written, by oevrlapping on other things that were put & present on the screen.. Another similar probelm is that the Vector shaped used for example to highlight certain words or shapes, also change their position on the screen so that they no longer highlight exact things that we once used these vectors to highlight or outline... Anyone knows how to solve this problem please?? I made sure that the same fonts are available in the Library in both old and newer computers...
thanks in advance..

You might want to take your question to the FCP forum - if you copied all fonts to your Library>Fonts folder and restarted they should be recognized by all applications. I know that this works for Adobe products, anyway.
Clinton

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and g

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

Is there a way to locate file path of a font used in text layer?

I delivered a file to a client and there is a missing text layer dependency.
I thought I delivered the correct font for the text layer but there is an issue somewhere...perhaps multiple versions of the font on my system..or slight
difference in the font name. The project loads without the error on my system.
Is there a method within After Effects to obtain a file path for the font I am using? ..or at least a way to get more detailed information
about the font itself?...I mean beyond what is available in the font selection window.
I need to locate the exact font in the exact folder After Effects is pulling it from.

even better..I did a search within Fontbook for comparable file name..as I don't add and remove fonts constantly
and discovered the font and also discovered why there was confusion in AEFX..the font had been generated in
Fontographer and it's file name did not match error prompt or collected file report
that was better than suffering through the 100's of possible results I was getting in Finder. And Fontbook also provided the path to the exact font used...
..feeling a bit silly...but I think this will work.

Fonts used in some text layers not available...

I've been gettting the following message lately when opening Photoshop files at work: "Fonts used in some text layers are not available for activation. You will need to replace these fonts before the layers can be used for vector based output".
But when I check my text layers, there are no indications that any fonts are missing. I double click on every text layer to see what font is being used and double check Suitcase Fusion to make sure it is activated.
I'm using OSX Maverick 10.9.2. I'm using Suitcase Fusion 5 version 16.2.0. And I'm using Photoshop CC 14.2.1. It's more of an annoyance than anything, but would like to know why it keeps telling me fonts are not available when they are currently activated in Suitcase. Not sure if it's an Adobe issue or a Suitcase Fusion issue.
Anyone have any ideas on this?
Thanks!
Steve

DrStrik9, I opened up the file, clicked on each text layer and selected all to make sure there wasn't any character using a different font. There wasn't. I clicked on the font being used, tried changing it to a different font, then back to the font that was being used. I saved and closed the file, then reopened it, and that seemed to cure it for that file. Not an efficient way to go about it though.
I then tried another file that was giving me the same error, clicked on each text layer, changed the font to a different one, then back to what was being used, saved, closed and reopened it, and still got the same message. So it didn't work for that one. I then tried changing the font to a system font, Times Bold true type, saved, closed, reopened, and got the message again. So not sure what is going on. The fonts used in the first file were DIN and DINEngschrift postscript font, which were loaded and active in Font Fusion.
The 2nd file I tried was using Gotham Bold postscript font, which also was active in Font Fusion. I've run Font Doctor on the fonts and found no issues.
Even though I'm getting the error message when I'm opening these files, none of the text layers have that Exclamation point indicating there is an issue with the layer, so it would seem the text layers are fine. Just really annoying to get that error every time I open the file.
Another thing I tried is I created a new Photoshop file and just made some text layers using Gotham Bold. Saved, closed and reopened the file and did not get the message. So, I don't know why I would get it with one file and not another. Very confusing/frustrating. Any other ideas?
Thanks in advance,
Steve

Use of text elements in wirte_form function module.

Hi guru's,
Could any one tell me what is the use of text elements in write_form functional module SAP SCRIPTS. As per my knowledge text elements are used for multi language purpose is there any other advantage other than that.
Thanks in advance.
Vardhan.

Hello.
A text element is a block in script that can be written several times in your document. You can put fixed texts, variables, include texts, images, etc etc
When you see WRITE_FORM, element 'X', you know that everything that is inside element /E X of your script is writen. It's very usefful to organize your script, and it eases to construct a very complex script.
It's also usefull to translations in SE63.
Best regards.
Valter Oliveira.
Edited by: Valter Oliveira on May 27, 2008 10:05 AM

Font use in PS Elements

Similar Messages

Maybe you are looking for