Font won't display or print following upgrade to Reader 9

Since "upgrading" the other day to Reader 9, Monotype Corsiva will no longer display or print on my .pdf documents. I had no problems with the font displaying or printing prior to then. I tried copying the font and pasting it in the Fonts folder, but that didn't help. Anyone have any suggestions as to how I can fix this?

I'm having exactly the same kind of problem. I downloaded
Adobe Reader 9 and i havent used Monotype Corsiva before,
but for my projekt it is simply vital ;/
Looking forward for any help solving the problem
regards

Similar Messages

Din font won't display in pdf file since December update to version 11.0.10

I upgraded my Acrobat to version 11.0.10 just before the Christmas break. Din font is my corporate typeface and I used it yesterday to create an invoice in Mac Pages only to discover that I cannot view the pdf as the font won't display in Acrobat. And to add to the problem my clients who are using the same version of Acrobat are unable to view the font either on the pdf. It all worked fine before the upgrade.
What can be done to rectify the problem? I need to fix this asap.
This error message appears when I try and open the file "Cannot extract the embedded font 'DQPJNL+DIN-Medium'. S"
The DQPJNL bit changes depending on the file being opened but essential Din font won't display.

Hi,
Please check if DIN font is embedded in your PDF by going to File > Properties > Fonts
If no, then you might need to go to 'Tools > Print Production > Preflight'
Then, open the PDF fixups section, click on Embed fonts fixup and choose 'Analyze and fix button'.
Please check and let me know if you are able to view the font now.
Regards,
Anubha

Some fonts do not display or print

Some of my fonts (that were working fine) no longer display or print properly after upgrading to Mountain Lion (10.8.3). They worked fine in 10.6.8. Most of the ones that do this are TrueType fonts. I ran "validate font" and it showed no errors. Is there a way to fix this (other than buy all new fonts)?

Boot in safe mode. This will cause certain caches maintained by the system to be rebuilt.
Safe mode is much slower to boot than normal.
When the login screen appears, reboot as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, proceed as below.
You must be logged in as an administrator to carry out these instructions.
Back up all data.
Triple-click the line below to select it:
sudo atsutil databases -remove
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Reboot and test.

Fonts won't display in CS3-- particularly Photoshop & Illustrator

Hello Everyone,
Thank you for any help you may be able to provide for this question. Recently my laptop with my installed softwares crashed. Luckily I was able to recover most everything and restored it on my newer iMac.
One of the few software that didn't play nice was CS3, so I had to re-install it. Now, many of the fonts won't show up. I'm doing a logo for a client and I need some fonts but fonts from the following- New Peninim, Corsiva Hebrew, Ariel Hebrew and/or Raanana-- don't appear after you engage the Type tool. What shows up in both Photoshop and especially Illustrator is a square box with nothing in it.
I've gone to MANY of the help columns on line and followed 4 or 5 different "solutions"-- nothing seems to work. I even, against my suspicions, called the Adobe customer service and the best they could offer was to post a question here if my answer was not apparent.
So, does anyone have an opinion on the matter? Bearing in mind that I've put fonts in the Adobe folder, reset characters and a few other things since yesterday.
Any help would be greatly appreciated,
Thanks,
Andre

If you have the fonts installed and activated and they are not functioning, you may need to clear your font caches.
Are you using any font management software? Can you confirm that the fonts are active? If you're not aware of any font management, open up Font Book (applications -> Font Book) and see if you see the fonts in there. If they are in the list, are they active? If they are not in the list, you need to add them there (I think just by dragging them from the finder) and activate them. Not being a Font Book user I'm not sure, but you may need to restart Illustrator to see the newly activated fonts.
If you don't have the fonts active, your type will be displayed in the default font (Myriad, unless you changed it) which likely doesn't have the hebrew characters, thus all you see is the squares indicating missing characters.

Foreign fonts don't display or print

There are fonts that install with Mac OS that use non-Roman characters, e.g., Japanese, Hindu, and Korean. There is also a Greek font called Symbol. In the case of Symbol and some others, selecting the font means you get that font onscreen and at the printer. In others, for some reason, that doesn't happen. You select the font, e.g., Geeza Pro, Naskh, and Arial Hebrew, and what you get onscreen is Roman type. I'm trying to use a Greek font other than Symbol; I loaded it so that it shows up in Illustrator's list, but when I type with it, I get plain old vanilla Roman. What am I doing wrong or not doing at all? What does it take to make the font work? I believe it's a Truetype font, if that matters.

What am I doing wrong or not doing at all? What does it take to make the font work?
To type in another script on all modern computers you need to change the keyboard layout, not the font. You go to system prefs/language & text/input sources and check the boxes for the ones you want, plus the box for "Show Input Menu in Menu Bar." Then you go to the "flag" menu at the top right of the screen and choose your language and type. The font takes care of itself.
An exception is if you have a old non-Unicode Symbol font on your machine. This maps some greek stuff used in math to the normal latin character positions, so changing the font will change the characters. But it is best not to use this kind of Symbol, because there is no guarantee that any modern computer will display greek instead of the latin dictated by current standards. Instead for greek you should use the greek keyboard layout provided.

Fonts do not display or print correctly after you convert or combine documents in Acrobat

We are working with many groups providing PDFs for our project. When inserting PDFs into our main PDF the Fonts display randomly grabbled or like squares symbols. Does anyone have a solution?

Thank you for your response, I am trying to figure out what to do differently when we re-create the PDF so we don't have font issues when we combine. I don't want to keep recreating the problem, I am looking for a solution. Why does this happen? What settings do I tell other to apply on their Acrobat? Is the a font issue in Adobe? I found this on a Google search on the internet and can't seem to get it to work on XI PRO.
Embedding fonts into Acrobat 9 through Distiller:
Launch Acrobat.
Choose Advanced > Print Production > Acrobat Distiller.
Select Standard in Default settings.
Go to Settings and select Edit Adobe PDF Settings.
Select Fonts and in the font source window select the fonts you want to Add.
Click Save As and then OK.

Font won't display -- strange behaviour

Hi all,
I have a keynote presentation that I prepared last year, and it worked fine. I went to open it today, and the font does not render properly -- all the letters are compacted together and not legible. If I change the font size, I can read it again (going from size 36 to 18), but if I enlarge the text again, the same thing happens.
I emailed the keynote file to another mac in the house, and it opens just fine on that one. I tried restarting, and same thing. Since I need this presentation for tomorrow, I just went through and changed the font to a different one, and that works just fine.
When I open a different keynote file, that one displays correctly.
Any ideas?
Thanks,
Boris

I see the same problem. Arial and New Times Roman are affected. The rest work fine. They behave as though the widths are fixed. Resizing the same fonts in Mail work fine, but found the same problem in Pages. Font Book validated these fonts. Also, in the Inspector, Text Spacing has no effect. I don't have an answer yet but I have a question. Did your other Mac on which it worked properly, have an earlier version of either iWork or OS X and are you having trouble with Arial and New Times Roman also or a different font?

IWeb won't display different Domains after upgrading to Lion?

After upgrading my MacBook Pro to Lion 10.7.2 my iWeb 3.0.4 program won't open different Domain files. Even though I have several different Domain files on the hard drive, no matter which one I try to open it always shows up as the last Domain opened by iWeb. If I remove the last opened Domain file from the hard drive and try to open one of the remaining files everything is OK, except if I again try to open a different Domain it also shows up as the last opened file.

Your unique question is often discussed.
Search this forum for Lion. You'll find this answer :
where do I find "domain" in Lion?
Or look to the right where it says : More Like This.
Or have a look at this movie :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html
Or wait for our resident technology experts to provide the answers from the search.

Musical notes in default font won't display

My musical notes in my swf no longer display but are replaced by letters of the alphabet or the amphersand.
How can I get the notes to display? when I to to the symbol it shows the letter of the alphabet but in the fla when I look at the Text, Font it has the (Musical Symbols) Default Font selected as it should.
Help!

You can read about Flash font embedding here: http://help.adobe.com/en_US/flash/cs/using/WSb03e830bd6f770ee21a3597d124daee0526-8000.html

Preview 5.01 won't display JPEG's after upgrade to Snow Leopard

Upon upgrade of Snow Leopard 10.6 I cannot open a jpeg on Preview that has been submitted by someone to me. It shows up in the side column but not on the main page. how do I get to see the image again? thanks!

There are several possible problems, one of which can be solved to by updating to 10.6.2. You can also try removing these two files:
/Users/yourname/Library/Application Support/Preview/PDFIndex4.sk
/Users/yourname/Library/Preferences/com.apple.Preview.plist
Then restart and relaunch Preview. If it still isn't fixed, and you are updated to 10.6.2, then you should download the COMBO updater and run it. There is a link to download it here:
http://support.apple.com/kb/DL959
You can run it even if you have already updated.
Francine
Francine
Schwieder

Font won't display once installed in MS Apps

I activated Baghdad and Al Bayan fonts in the Font Book for both my account and the computer. However, the font's don't show up in Office Applications like Word and Excel, how do I activate them in these apps?

Are they in ~(yourHome)/Library/Fonts? If not put them there. Then relaunch your MS apps.
-mj
[email protected]
Message was edited by: macjack

Arial Black Font won't display

My website uses Arial Black on all of its menus. Firefox 4.0 converts this to Arial. It works fine with earlier versions of Firefox, IE and Chrome.

Not even a workaround to be honest - makes arial black extra bold (horrible looking) on all other browsers. Need to pinpoint FF4+ through jscript or php and apply css for FF only. Why they have done this is beyond me. Pain in the ass

Font Licensing for Use on Print Media and Web

Hi,
I currently have a subscription to the Creative Cloud service, with the Student/Teacher Edition discount. I just have a few questions, regarding my legal use of Adobe fonts, such as Myriad Pro.
1) Will I be able to use this font on print media, such as the box, for a commercial product? What about a printed logo on a commercial product itself?
2) Will I be able to use this logo legally to creative a logo for a commercial business, but not preserve the font itself (i.e. create outlines in Illustrator, use a png image file, etc.)?
3) If I am using the Typekit service provided to me via Creative Cloud, what are the restrictions I have in terms of monthly/yearly webpage visits and the number of fonts I am allowed to use?
4) If I was to let my Creative Cloud subscription expire, would I still be allowed to continue to use the designs I created using the Adobe fonts in the time that I was subscribed to the service? I.e. I made a logo using Myriad Pro today, but let my subscription expire. Would I be allowed to continue to use my logo after my subscription has expired?
5) If I were to make an iOS/Android application for revenue on their respective App Stores, what kind of licensing would I need in order to use the Adobe fonts?
Thanks for clearing any confusion. I tried reading through a few EULAs, but all I seemed to get were headaches.
Sincerely,
Jonathan

Hi Jonathan,
if you stop your cloud subscription the included typekit subscription ends, too. Therefore websites that use typekit fonts won't display them anymore. (Text will be displayed with your fall back font or your browsers default font.) To keep your websites working as you intended you need to keep paying for a typekit subscription.
See also:
http://forums.adobe.com/message/5336533
http://help.typekit.com/customer/portal/articles/6618-cancel-your-account
To answer your question 3:
Cloud includes a typekit Portfolio subscription. So the page view limitations of the portfolio subscription apply.
https://typekit.com/plans
I haven't found out about the usage of desktop fonts, after you end your subscription. I doubt that Adobe allows to use the fonts when the subscription is cancelled.
Marcus

Firefox 3.6.2 won't display the CSS correctly in VBulletin 4.1. Safari, Explorer and Firefox 4 beta work fine!

My upgraded site: http://www.thesabrehood.org/thehood/forum/ has CSS that displays fine with Safari and IE and the new Firefox Beta 4... but it won't display with the latest upgrade of FF3.6x. Obviously you fixed some code in V4 beta.. how about fixing 3.6x while you're at it!!!!

I also have this problem and it just started in the last week or so. It seems to be dependent on my home network and the problem only exists with firefox. I have used chrome and IE8 with no issues. I can verify tomorrow that it only exists in my network but one thing I was able to test is that the problem exists even on my linux boot. I am totally dumbfounded with this problem and I can't find anything that will allow the gmail page to load. All other pages I have tried load fine, all be it a little slower than normal but they load. If anyone knows of a difference between firefox and all other browsers on how it goes through the router I would appreciate the info cause I don't know of any differences.

Store won't display search results, tabs dead

Search results in iTunes Stoe (11) won't display all items (i.e. it reads "Total: 301 items" at the bottom of the list but only 16-20 will show up (depending on my luck). This is even true of, for example, a podcast show page itself. When I scroll down, there are empty lines where episode titles should go, but if I go all the way to the end, they suddenly disappear and the "Total: 301 items" jumps to the end of the 16-20 item long list.
Categories within search results won't display either (i.e. I can see the "All," "Books," iTunes U" list on the right side, but clicking on each does nothing).
Going from "Details" to "Ratings and Reviews" also requires clicking the tab and then reloading the page. My connection is fine, this has been happening for at least the last month at home, while out, using wifi and when drectly connected by old timey cables. Updated this morning, still no change.
Help?

This article has some tips
http://support.apple.com/kb/ts1368
(particularly under Troubleshooting on a Mac)
If that does not help... As a test, to narrow down the cause, you may want to create a new user account in System Preferences Users & Groups pane. It can be Standard or Admin. Log out and log in to the new user account (do not use Fast User Switching).
Try running iTunes from the new user account, and accessing the iTunes Store.
If the problem does NOT occur in the new account, the cause is likely to be something in your primary user account. For example, it could be user preferences settings, or something related to your iTunes library, or a background process that runs in your account that is interfering somehow.
If the same problem does occur in the new account, the cause is likely to be related to the overall OS, the iTunes application, or maybe network settings that block access to the iTunes Store.
Either way, you'll be able better focus additional troubleshooting.

Font won't display or print following upgrade to Reader 9

Similar Messages

Maybe you are looking for