Fontd and PS take me almost 100% CPU

When I am using font function in Photoshop, fontd and PS take me almost 100% CPU!!
How can i solve this?

Captain Ibuprofen, we actually continued having the slowness problem in the past week. Then one of our developers found out the reason: as same as yours, caused by the page number widget. I wish we would have seen your response earlier. But yeah, so now we took out the page number widget and everything goes normal.
Also thanks for the tips on using the cpInfoCurrentSlide variable when adding the slide number. Thanks Andy.

Similar Messages

Firefox using almost 100% CPU - hogging resources - hanging

After several hours of operating Firefox starts using almost 100% CPU - with peaks of 100% occurring in rapid succession - FF hangs until CPU useage drops below 100%
Followed recommended troubleshooting as recommended on this site:
* Started in Safe mode - no problems occurred.
* Disabled all extensions; Plug-ins left operating.
* No replication of problems.
* Enable 1/2 of extensions up to Flashblock - restarted - seems ok
* Enable most remaining extensions
* (There are 3 Java extesnions - only enabling one) - again seems ok
* Some hours later - problem reoccurred. Each time CPU useage peaked at 100% (according to Task Manager) the Firefox Window flickered & was unresponsive.
* Deleted cache - no change
* Disabled recently added programs - no change
FF opens and closes normally & completely. '''Problem only seems to occur after FF has been operating for some time'''
This has occurred intermittantly before but has become chronic over the last few days. Apologies if I've been repetitive or explained poorly - FF has hung several times while typing this.

No issue for me, after 4 loops my CPU load was around 18%.
Firefox 33.1.1 under Windows Vista.

CF9 CPU at 100%. Moved to new CF11 server and copied files over and it's still at 100% CPU almost immediately on new server

Our web server is stuck at 100% CPU. Three days ago we were on CF9 and started running into this problem until the server crashed and wasn't salvageable. Luckily we had a fresh Windows 2008 Server R2 ready to go with a fresh copy of CF11 on it. I copied all the website files over and we were back up and running. A day later the CPU is back to 100% on the new CF11 Windows 2008R2 server. I also updated CF11 to the latest update 3 that was just released.
If I turn off the CF service the CPU usage goes back to normal. If I turn CF back on, the CPU goes back to 100% within like 5 seconds. So it doesn't seem like some slow running page or anything that eventually eats up all the memory or whatever. I'm not an expert at looking at the logs, but I don't see anything too out of the ordinary. The one thing that looks strange to me is I see this line over and over.
Dec 12, 2014 11:28:41 AM Information [ajp-bio-8014-exec-59] - Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=194', method='get'}
That line makes me think we got hacked somehow, but it's hard to know.
I did up my JVM heap size and max size to 1024MB. We have 4GB of memory. And i changed teh JVM arguments to what's below based on a forum post. Nothing seems to help.
-server -XX:PermSize=192m -XX:MaxPermSize=192m -XX:+UseParallelGC -Xbatch -Dcoldfusion.home={application.home} -Dorg.eclipse.jetty.util.log.class=org.eclipse.jetty.util.log.JavaUtilLog -Duser.language=en -Dcoldfusion.rootDir={application.home} -Dcoldfusion.libPath={application.home}/lib -Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true -Dcoldfusion.jsafe.defaultalgo=FIPS186Random
Any additional ideas on how to debug this or what to look at? Thanks!

Thanks Charlie for your insight. I searched everywhere to find a cfhttp request that was causing the issue, but couldn't find it. I did find some unusual files that were loaded though that I know we didn't put there. I did a search and found this link that shows the code. Coldfusion CFIDE bitcoin mining exploit – PHP involved… | code-complete.com and that you mention in your article too. I don't see any of the executables running or files that were mentioned though. I found that code in 8 different spots though and removed them. Maybe our old server had the executables and hacked files on them. Hard to know as it won't boot up anymore!
I think I did possibly isolate the HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=218', method='get'} in the http.log file to a certain site in IIS though. And it wasn't our main site. I turn off this website in IIS and it appears the weird request goes away. I turn the site back on and it starts to re-appear. It doesn't always load constantly so it's a little hard to tell. This site is pretty small. I went through each file on the site and did find one file that did appear to be hacked. It wasn't coldfusion code though. Just some html links. I removed it. That's all I could find. No cfhttp calls or anything else.
We re-installed Coldfusion 11 on Friday as well and upgraded to Update 3. It doesn't stay locked at 100% as much right now, but it being over the weekend we don't get much traffic. Monday will be the real test. I think I will leave that smaller site turned off for now and see how things perform. I'm doing a full virus scan for the heck of it overnight too. Don't really expect it to find anything though. I also turned on advanced logging in IIS 7.5 and don't see anything out of the ordinary. I made sure client variables weren't in the registry either.
Here's a part of the http.log file when I turn the IIS site on. I turn the site off and it stops popping up in the logs.
"Information","ajp-bio-8014-exec-57","12/13/14","22:33:14",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=233', method='get'}"
"Information","ajp-bio-8014-exec-57","12/13/14","22:36:17",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=601', method='get'}"
"Information","ajp-bio-8014-exec-57","12/13/14","22:38:31",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=459', method='get'}"
"Information","ajp-bio-8014-exec-57","12/13/14","22:38:54",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=108', method='get'}"
"Information","ajp-bio-8014-exec-57","12/13/14","22:39:55",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=218', method='get'}"
"Information","ajp-bio-8014-exec-63","12/13/14","22:52:03",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=54', method='get'}"
"Information","ajp-bio-8014-exec-64","12/13/14","22:57:32",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=40', method='get'}"
"Information","ajp-bio-8014-exec-64","12/13/14","22:58:37",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=702', method='get'}"

Distiller 8 and 9 both locking up, 100 % CPU usage

Not sure if its related, but probably, since it happened right after...I just transferred everything from my quad core mac pro to my new 8-core Mac Pro. Everything went well, but now Distiller 8 starts and then sits and gives the beachball of death, and one of the cores shows 100% cpu usage. (I have that utility that shows memory used, CPU usage, etc.). I hadn't bought Acrobat 9 yet so I downloaded it and installed, and Distiller 9 does the EXACT same thing. The ONLY thing I can call an "error message" is that I can see in the window after it launches is "Error in /Library/Application Support/Adobe PDF/Settings/PDFX4 2007.joboptions:/CheckCompliance out of Range."
That message may have been there whole time, even when it worked, though. I don't know. At any rate, I need distiller working! Any ideas?

Glad to hear all is well. Preference files can cause big problems. Eons
ago, in the 1980s, I used a communications program called Red Ryder. I
loved the program. After it was updated to a new version (it might have
been called White Knight by that time), I started to have terrible
problems. I wrote to their technical support. They couldn't duplicate
the problem. It couldn't happen etc. I eventually got a little hot under
the collar. After all, if I couldn't use my modem, I couldn't check my
email, etc. It turned out to be a problem with my preference file when
converted to the latest version, that was causing the problem. Since
they always started with a new preference file, they couldn't duplicate
the problem that was obvious to me.
...Mike

Please help: Course loads very slow and takes almost 100% cpu and 1.08 GB memory

The total page number is 129. We used Captivate 5.5. We have several Webpage widgets and a few videos. I tried to take out the web widgets and the videos, however, the course still loads very slow.
I would really appreciate if someone can give somve suggestion.
Thank you very much.

Captain Ibuprofen, we actually continued having the slowness problem in the past week. Then one of our developers found out the reason: as same as yours, caused by the page number widget. I wish we would have seen your response earlier. But yeah, so now we took out the page number widget and everything goes normal.
Also thanks for the tips on using the cpInfoCurrentSlide variable when adding the slide number. Thanks Andy.

ITunes 10.6 and iPhone 4 iOS5.1 100% CPU utilisation and cannot revert to iTunes 10.5.3

Upgraded my iPhone 4 to iOS 5.1 and ITunes to 10.6. As soon as I start iTunes to sync my iPhone the CPU utiisation jumps to 100%. I have run 'netsh winsock reset' and restarted my PC before opening iTunes following previous similar problems. On cancelling out iTunes it takes a backup such that when I tried to revert to iTunes 10.5.3, which had been working for me, the backup is now incompatible and I am likewise unable to sync. Help please - anyone else experienced similar or the same?

Reinstall the Apple Mobile Device Service. See http://support.apple.com/kb/ht1747.

Bad performance: Xpath View causes database server almost 100% cpu

Hi there,
Since I am rather inexperienced in using the Oracle XML DB I wonder If I am doing wrong with the following:
I created a table with a xmltype column in it:
CREATE TABLE LPD_LOAD_XML
FILENAME VARCHAR2(50 BYTE) NOT NULL,
XML_CONTENT SYS.XMLTYPE,
DATE_CREATED DATE DEFAULT sysdate NOT NULL,
CREATED_BY VARCHAR2(30 BYTE) DEFAULT user NOT NULL
and I am using a xpath query to retrieve the data which is stored in the xmltype column:
select extractvalue(value(p),'/medobj@barcode') barcode
, extractvalue(value(p),'/medobj@VJ') vj
, extractvalue(value(p),'/medobj@FNF') fnf
, extractvalue(value(p),'/medobj@GLB') glb
, cast ( multiset ( select extractvalue(value(q),'/author@cap') cap
, extractvalue(value(q),'/author/name/addpre') addpre
, extractvalue(value(q),'/author/name/fname') fname
, extractvalue(value(q),'/author/name/prefix') prefix
, extractvalue(value(q),'/author/name/lname') lname
, extractvalue(value(q),'/author/name/addapp') addapp
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/author'))) q
) as authors_type_nst
) as authors_type
, cursor(select extractvalue(value(q),'/corp.author') corp_author
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/corp.author'))) q
, extractvalue(value(p),'/medobj/isbd/auti') auti
, extractvalue(value(p),'/medobj/isbd/edition') edition
, cursor(select extractvalue(value(q),'/impressum/pofpublication') pofpublication
, extractvalue(value(q),'/impressum/publisher') publisher
, extractvalue(value(q),'/impressum/pyr') pyr
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/isbd/impressum'))) q
, extractvalue(value(p),'/medobj/isbd/collation/extent') extent
, extractvalue(value(p),'/medobj/isbd/collation/illustration') illustration
, extractvalue(value(p),'/medobj/isbd/collation/size') size_
, extractvalue(value(p),'/medobj/isbd/collation/enclosure') enclosure
, cursor(select extractvalue(value(q),'/series/series.title') series_title
, extractvalue(value(q),'/series/series.nr') series_nr
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/isbd/series'))) q
, extractvalue(value(p),'/medobj/isbd/part') part
, extractvalue(value(p),'/medobj/isbd/annotation') annotation
, extractvalue(value(p),'/medobj/isbdblock') isdbblock
, extractvalue(value(p),'/medobj/isbn/t') isbn_t
, extractvalue(value(p),'/medobj/isbn/d') isbn_d
, extractvalue(value(p),'/medobj/isbn/uh') isbn_uh
, cursor(select extractvalue(value(q),'/isbn2/t') isbn2_t
, extractvalue(value(q),'/isbn2/d') isbn2_d
, extractvalue(value(q),'/isbn2/uh') isbn2_uh
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/isbn2'))) q
, cursor(select extractvalue(value(q),'/label') label
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/label'))) q
, extractvalue(value(p),'/medobj/ppn') ppn
, cursor(select extractvalue(value(q),'/note') note
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/note'))) q
, extractvalue(value(p),'/medobj/sysreq') sysreq
, extractvalue(value(p),'/medobj/mat') mat
, extractvalue(value(p),'/medobj/lang.content') lang_content
, cursor(select extractvalue(value(q),'/siso@type') siso_type
, extractvalue(value(q),'/siso@rank') siso_rank
, extractvalue(value(q),'/siso') siso
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/siso'))) q
, cursor(select extractvalue(value(q),'/subject@rank') rank
, extractvalue(value(q),'/subject') subject
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/subjectheading/subject'))) q
, cursor(select extractvalue(value(q),'/genre/genre.full') genre_full
, extractvalue(value(q),'/genre/genre.abbr') genre_abbr
, extractvalue(value(q),'/genre/genre.cd') genre_cd
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/genre'))) q
, extractvalue(value(p),'/medobj/agecat') agecat
, extractvalue(value(p),'/medobj/readinglevel') readinglevel
, extractvalue(value(p),'/medobj/avi') avi
, extractvalue(value(p),'/medobj/review') review
, extractvalue(value(p),'/medobj/reviewer') reviewer
, cursor(select extractvalue(value(q),'/cover') cover
from TABLE(xmlsequence(EXTRACT(value(p),'medobj/cover'))) q
from lpd_load_xml i
, TABLE(xmlsequence(EXTRACT(i.xml_content,'bmo/medobj'))) p
where i.filename = b_FileName
You can see that I am using both CAST MULTISET and a cursor, since I am finding out the best way. I have to use either one because the xml is stored in a hierarchical way. But now i am lost. What is most surprising to me is that the database server is really 100% dedicated in mastering this query. Is there anyway to avoid this? How can I retrieve the data in the xml file from within the database without causing a slow performance?
Greets,
William de Ronde

Have you created indexes on the XMLtype Column? Either way, if i am not mistaken then your XMLType column will default to XMLType CLOB storage. This will cause that your XML data will be put completly into memory regarding the inbetween resultsets. Use dmbs_xplan procedure, autotrace on (in sqlplus) or tkprof tools to find out whats happening. Did you generate statistics on your table via DBMS_GATHER_STATS package (don't use the analyze statment) ?

Compressor and qmaster taking 100% CPU after quit

I have compressor set up with qmaster on my 8-core 2008 Mac Pro. When my cluster decides to show up (it doesn't always, but that's a seperate issue) it works great. The encodeing processes take up almost 100% of the CPU and it really cuts down on the time.
he problem is, when it's done and I quit, the CPU usage jumps back up to 100% until I force quit the 8 "Qmaster Task Service" and 4 "compressord" processes in Activity Monitor. This is after it's done encoding, the processes have stopped and all the files are there. I quit compressor and CPU usage jumps up to 100% again for about 10 minutes, or until I force quit the processes I mentioned. Any ideas?
Mac Pro, early 2008
8 core 2.8 GHz
8GB RAM

Aaron Cohen2 wrote:
I quit compressor and CPU usage jumps up to 100% again for about 10 minutes, or until I force quit the processes I mentioned. Any ideas?
Mac Pro, early 2008
8 core 2.8 GHz
8GB RAM
Actually, I don't. I've run a whole bunch of cluster tests in 3,5 and 4 under various conditions and no clues popped up in that testing. (Assume this only happens with clusters.)
What I'd suggest is restting background processing, running Compressor Repair (checking trash preferences) and repairing permissions. I know; it's a shotgun approach.
Let us know.
Russ

Reader 9.1 (Linux) takes 100% CPU

Initially when starting Adobe Reader and opening a document everything is fine. But after a few minutes Reader takes up to 100% CPU. This also happens when starting Adobe Reader without opening a document.
It's Adobe Reader 9.1 (AdobeReader_enu-9.1.0-1.i486) on Fedora 10 (i386)

Hello there,
I can reproduce the same issue. I just start acroread (without any options or files), wait some time and suddenly acroread starts to use one whole cpu. Here some information about the system:
> cat /etc/issue
CentOS release 5.2 (Final)
> uname -a
Linux wumc0310 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 11:57:43 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
> acroread -v
9.1.0
I also tried the trick with
> ACRO_DISABLE_FONT_CONFIG=1 acroread
but it didn't change anything.
Do you got some ideas how I can track down this problem? I tried to use
> acroread -DEBUG
but here absolutely nothing happened, just with
> acroread -DEBUG acroread
the reader started and shows
Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/Annots.api ... [dlopen success for Annots.api, handle = 0xbf32f68]
Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/EScript.api ... [dlopen success for EScript.api, handle = 0xca14620]
after some minutes the next plugin info occured:
Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/EFS.api ... [dlopen success for EFS.api, handle = 0xcc1fad0]
and some minutes later, the acroread process started to use the whole cpu...
If I start acroread and try to trace the programm, at first the output looks like:
gettimeofday({1242055601, 629918}, NULL) = 0
ioctl(3, FIONREAD, [0])                 = 0
gettimeofday({1242055601, 629991}, NULL) = 0
poll([{fd=3, events=POLLIN}, {fd=13, events=POLLOUT}], 2, 15) = 0
gettimeofday({1242055601, 644659}, NULL) = 0
ioctl(3, FIONREAD, [0])                 = 0
gettimeofday({1242055601, 644729}, NULL) = 0
poll([{fd=3, events=POLLIN}, {fd=13, events=POLLOUT}], 2, 1) = 0
gettimeofday({1242055601, 645655}, NULL) = 0
ioctl(3, FIONREAD, [0])                 = 0
gettimeofday({1242055601, 645719}, NULL) = 0
poll([{fd=3, events=POLLIN}, {fd=13, events=POLLOUT}], 2, 0) = 0
ioctl(3, FIONREAD, [0])                 = 0
poll([{fd=3, events=POLLIN}, {fd=13, events=POLLOUT}], 2, 0) = 0
and as soon the cpu consumption has started, the output is:
gettimeofday({1242055677, 855078}, NULL) = 0
ioctl(3, FIONREAD, [0])                 = 0
gettimeofday({1242055677, 855118}, NULL) = 0
poll([{fd=3, events=POLLIN}, {fd=13, events=POLLOUT, revents=POLLERR|POLLHUP}], 2, 5) = 1
gettimeofday({1242055677, 855158}, NULL) = 0
ioctl(3, FIONREAD, [0])                 = 0
gettimeofday({1242055677, 855197}, NULL) = 0
poll([{fd=3, events=POLLIN}, {fd=13, events=POLLOUT, revents=POLLERR|POLLHUP}], 2, 5) = 1
gettimeofday({1242055677, 855237}, NULL) = 0
ioctl(3, FIONREAD, [0])                 = 0
gettimeofday({1242055677, 855277}, NULL) = 0
poll([{fd=3, events=POLLIN}, {fd=13, events=POLLOUT, revents=POLLERR|POLLHUP}], 2, 5) = 1
(just for the record)
Greetings
Toni

FMLE CPU almost 100%?

Hi everyone, Please I need help. I use flash media live encoder to livestream at our church and I get almost 100% CPU usage. I dont have any other programs running just flash media live encoder and as soon as i press to start streaming, CPU usages jumps all the way up.
Below is my equipment I use
AMD Athlon II X4 640 Quad Core 3.0GHz CPU
MSI 970A-G46 AM3+ AMD 970 + SB950 Motherboard
G.SKILL Ripjaws Series 8GB 240-Pin DDR3 SDRAM DDR3 1600 RAM
EVGA 02G-P4-3658-KR GeFrce GTX 650 Ti 2GB 192-bit GDDR5 Video Card
Windows 7 Ultimate x64 OS
So I have 3 cameras I use and those cameras go into my ATEM TVS via HDMI or SDI. from ATEM TVS it goes to a PCI capture card. I've tried using
Blackmagic Design Intensity Pro
AVERMEDIA Game Broadcaster HD
AVerMedia Game Recorder -C985
All Three of these capture cards (same result)
I want to be able to stream HD quality 720-1080p at least that is what my streaming provider is telling me I should be able to do. so my settings are as follows. input is 1920 by 1080. output is 1280 by 720. Pretty reasonable. No matter what card I choose my settings are for H265 30fps I've tried all types of frames. and tried all times of bit rates. from 150 to 2000 kbps. always running at very high CPU. Please help me out. Thanks all

I Remember, that was a problem with 100% CPU for 10.1, 10.2 database by LISTENER
Need to rename $ORACLE_HOME/opmn/ons.conf to something else.
and restart listener.
It's may be useful if you installed OEM with database on the same server. Or problem can be anywhere else.

Firefox 3.6.12 is running extremely slow and taking 100% CPU on my mac.

Just updated Firefox to 3.6.12 and it's taking over 100% CPU on one of my processors and is running EXTREMELY slow, too slow to use.

Firefox used to be the doggs bollocks now its just a dog.
Back to internet exploder fro me im afraid.I cant keep waiting twenty seconds for everything its like being back in 1993.

Oracle.exe and java.exe are running my CPU 100% under XP Prof SP3

11gR1
oracle.exe and java.exe are running 100% CPU
I have increased virtual memory to 4 gig
I have defragmented the drive.
I checked the drive for errors.
I am searching the whole drive for viruses
I do not have the problem with Redhat Fedora 12 running 11gR1
I have 1 gig of RAM but cannot install release 2 because the installer expects
1 gig + 1

ooops!!! left that off...sorry
XP Prof SP3 32 bit..*.no problem with Redhat Fedora 12 running MySQL and 11gR1*
1 gig RAM Dell precision W/S 1.5 Gig rate 74 GiG SCSI HD 15000 RPM
Don't pass out but I am also running MySQL server 5.1.41 and MS SQL Server Express 2008.
Lucky it didn't catch fire
I installed XP prof months ago but this CPU domination occurred only starting last night!
However slow everything works in 11gR1
sqlplus myname/password and then select rows from table
sqldeveloper
PHP web sites
I've had plenty of trouble with Java running slow and hogging memory!
Edited by: landonmkelsey on May 2, 2010 12:21 PM
Edited by: landonmkelsey on May 2, 2010 12:24 PM
Let me guess...stop services for MySQL and MS SQL Server and see what happens!
Edited by: landonmkelsey on May 2, 2010 12:26 PM

"du process" pops up and occupy 100% CPU

I didn't solve the issue. I've got a macbook pro 2010, partitioned with bootcamp and with os 10.6.8. "Du process" appears and disappears, and when pops up occupy 100% CPU. This process isn't present in my other macbooks with the same os. Is it possibile and useful (to get 100% cpu availability) to cancel it? How?
Thank you in advance for your help!

Safari third party plug-ins and extensions can increase CPU usage.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

HP LaserJet Pro MFP M127fn - DNS issue, hundreds of UDP connections affects my router 100% CPU usage

Hi all,
We've bought about ten pieces (HP LaserJet Pro MFP M127fn), tested only one the other 9 are waiting for their time to be sent in our branch offices. The MFP works fine, no complains till later that day I noticed that our Mikrotik Router was struguling with high CPU usage, it took me some time to find the issue and it was the new bought MFP. Don't know why but it creates hundreds of UDP connections and almost 100% CPU usage goes to DNS service. As soon as I shutdown the MFP and delete all the connections everything goes back to normal. I've disabled almost all services (HP web service, Ipv6, SNMP, AirPrint, SLP, LPD, WS-Discovery, Bonjour), leaving only Ipv4 but without luck the issue persists. Here are some print screens confirming my saying:
http://i.imgur.com/UiOPSiu.jpg
http://i.imgur.com/dlgObPb.jpg
http://i.imgur.com/4RmQhot.jpg
http://i.imgur.com/oBuo9UO.jpg
http://i.imgur.com/Zf77V6b.jpg
Don't know if it is the same case but it look like, found this post that ha no answer to the issue: http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/New-HP-LaserJet-Pro-MFP-M127fw-network-...
Why does this happen? And how to solve my issue? Thank you in advance.

Hi @EugenX ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this Post has instructions.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

.kregedt uses 100% CPU

Hi all
until yesterday everything went fine, then
I tried to restart ias 6.1 on Solaris 2.6.
Then the process .kregedt uses 99.5 % CPU
time. Even after a reboot, when i try to
start ias, this process again takes close
to 100% CPU time and iAS isn't working.
Access to ldap works fine...
Any good ideas???
Thanks very much, Braini

Hi all
until yesterday everything went fine, then
I tried to restart ias 6.1 on Solaris 2.6.
Then the process .kregedt uses 99.5 % CPU
time. Even after a reboot, when i try to
start ias, this process again takes close
to 100% CPU time and iAS isn't working.
Access to ldap works fine...
Any good ideas???
Thanks very much, Braini

Fontd and PS take me almost 100% CPU

Similar Messages

Maybe you are looking for