Fonts are messed up using 1152x720 resolution

I prefer to use the 1152 x 720 display resolution and recently the fonts have become ragged and thin. I have to go to the preferences pane and change the resolution to another setting and then back to the 1152 x720 to get them back to normal. Never had a problem with this before. Thanks for any help.

My site is screwed up again. Everything was good until I deleted a photo from my main page. Now all the test is screwed up. I tried changing all text to Times Romans No good.
Back to Ariel No good. I made a new blank page and copy and pasted all content from my bad page to it. published that page and it looked good except for a link did not show up.
I'm getting fed up with this. Is anyone else having this trouble???? iWeb09 I just updated my OS yesterday. Hmmmmmmmmm Apple???

Similar Messages

  • Some webpage fonts are messed up after installing new fonts

    I've copied all of my fonts over into my .fonts folder, and since then some random fonts on webpages are messed up. Did I mess up a default font somehow? My default font on Namoroka is Serf size 16.
    Example: http://i.imgur.com/jNMpd.png
    Notice how the Twitter/Facebook/FeedBurner headings and descriptions are all small and cramped up looking.
    Thanks!

    See which fonts firefox is using:
    lsof | grep -i firefox | egrep -i 'ttf|pfb'
    Close down firefox, then open it and navigate directly to the page you're interested in, first.
    Some webpages, unfortunately, like to horizontally compress fonts, which can result in them looking horrible.
    Last edited by brebs (2010-06-12 17:10:40)

  • Fonts are messed up in different ways

    I had a hard time getting my fonts to look right last night after publishing my site. After publishing, the fonts which I had placed on my page, were all over the page, just spread all over at random, not where I put them. Some fonts were also not the type of font which I had selected, which was a simple Arial, no bold, no italic, no shadow, no nothing.
    The only exception to this font problem was the navigation bars. They were perfect, just the way I had built them, in all pages. BTW: My navigation bars, which I created myself, are in a vertical position (links are up/down. They are not the original iWeb nav bars squished to become horizontal. I just created four links, with simple text, and placed them horizontally.
    Anyway, they were the only fonts on the page that were not screwed up.
    To fix the other screwed up fonts, I ended up using images of fonts, instead of fonts. The images stayed put, they didn't fall out of place.
    So, this morning everything looked fine, as it did last night, until I opened my 13" Vaio notebook. In the 13" monitor, the horizontal navigation bar links, which were perfect last night, are now all spread out, all across the page, from the top to the bottom of the page. They didn't look like that last night in my 15" and 17" monitors.
    I've read dozens of posts regarding font issues, but didn't see one solution or workaround.
    Anyone know what's going on with iWeb fonts? I'm feeling like giving up on iWeb. It's just way more trouble than I thought it would be.
    thanks for listening :-)!!!

    My site is screwed up again. Everything was good until I deleted a photo from my main page. Now all the test is screwed up. I tried changing all text to Times Romans No good.
    Back to Ariel No good. I made a new blank page and copy and pasted all content from my bad page to it. published that page and it looked good except for a link did not show up.
    I'm getting fed up with this. Is anyone else having this trouble???? iWeb09 I just updated my OS yesterday. Hmmmmmmmmm Apple???

  • Fonts are messed, firefox is unstable

    FIG1 [[http://imageshack.us/photo/my-images/13/firefoxbadfonts.jpg/|Firefox bad fonts]]
    FIG2 [[http://imageshack.us/photo/my-images/24/firefoxgoodfonts.jpg/|IE good fonts]]
    Firefox 5.0 has been running great for me ever since it was released, but...
    For some reason, Firefox 5 suddenly started looking like FIG1. It should look more like FIG2 (internet explorer). When I start Firefox, it actually looks perfectly fine, but the moment I move my mouse over something or click on anything, FIG1 happens. The text is barely legible, and the program is very unstable. Sometimes I am able to click on websites, and sometimes it is frozen.
    The only change I made to my system between Firefox working and not working, was installing a little LCD display on the front of my computer tower, which involved installing new drivers and software. I can't imagine how that could affect firefox though.

    ''if you don't have anything positive to contribute which helps the "owner" of a question, please refrain from posting - especially when you comments aren't even related to the question''
    ''moderator''

  • While in zh|ja locale, zh|ja fonts are used even for Latin... why?

    One thing that has always bothered me is that my system uses funny fonts when it is running in a non-English locale, and I think I finally found the culprit.
    When I check for font matching in English everything seems normal:
    $ fc-match -s "sans"
    DejaVuSans.ttf: "DejaVu Sans" "Book"
    DejaVuSans-Bold.ttf: "DejaVu Sans" "Bold"
    DejaVuSans-Oblique.ttf: "DejaVu Sans" "Oblique"
    DejaVuSans-BoldOblique.ttf: "DejaVu Sans" "Bold Oblique"
    iYaHei.ttf: "iYaHei" "Regular"
    malgun.ttf: "Malgun Gothic" "Regular"
    kartika.ttf: "Kartika" "Regular"
    arialuni.ttf: "Arial Unicode MS" "Normal"
    But, if I were to do it in Chinese or Japanese:
    $ fc-match -s "sans:lang=zh|ja"
    iYaHei.ttf: "iYaHei" "Regular"
    DejaVuSans.ttf: "DejaVu Sans" "Book"
    DejaVuSans-Bold.ttf: "DejaVu Sans" "Bold"
    DejaVuSans-Oblique.ttf: "DejaVu Sans" "Oblique"
    DejaVuSans-BoldOblique.ttf: "DejaVu Sans" "Bold Oblique"
    malgun.ttf: "Malgun Gothic" "Regular"
    kartika.ttf: "Kartika" "Regular"
    arialuni.ttf: "Arial Unicode MS" "Normal"
    DejaVuSans goes /after/ iYaHei. This is a problem, as iYaHei's Latin glyphs look horrible; its CJK glyphs, while not the best, are at least extensive, which is why I use it. For monospace it is even more of a problem, because then Arial MS Unicode, which isn't even a monospace font gets priority over DejaVu Sans Mono in zh|ja environments.
    This is my current fonts.conf:
    <fontconfig>
    <alias>
    <family>Monospace</family>
    <prefer>
    <family>DejaVu Sans Mono</family>
    <family>Arial Unicode MS</family>
    </prefer>
    </alias>
    <alias>
    <family>sans-serif</family>
    <prefer>
    <family>DejaVu Sans</family>
    <family>iYaHei</family>
    <family>Malgun Gothic</family>
    <family>Kartika</family>
    <family>Arial Unicode MS</family>
    </prefer>
    </alias>
    <alias>
    <family>serif</family>
    <prefer>
    <family>Times New Roman</family>
    <family>AR PL New Sung</family>
    <family>MS Mincho</family>
    <family>MingLiU</family>
    <family>MingLiU-ExtB</family>
    <family>MingLiU_HKSCS-ExtB</family>
    <family>MS Song</family>
    <family>UnBatang</family>
    <family>RaghuMalayalam</family>
    <family>Arial Unicode MS</family>
    </prefer>
    </alias>
    <dir>/home/sokuban/.fontmatrix</dir>
    <dir>/home/sokuban/.Fontmatrix/Activated</dir>
    </fontconfig>
    This is probably happening because while I'm in a zh|ja locale, the system is looking for the highest font on my priority list that says it is a zh|ja font and then uses it—even to cover Latin etc glyphs that fonts higher in my priority list can cover; I'm guessing this is because it is assuming that those fonts aren't suitable for use in a zh|ja environment.
    So the simplest way to solve the problem that everyone would immediately think of is to say that DejaVu can do zh|ja. I (presume) it wouldn't cause any problems even though they can't, because then they will simply borrow from real zh|ja fonts and will now at least be used in a zh|ja locale. Actually, I would want this behaviour no matter what way I decide to solve the problem.
    The other—and better—solution to the problem would be to specifically set a different priority list to be used for different languages. That way when the system looks for "sans:lang=zh_TW", it'll get DejaVu at the top of the list to handle Latin, and then a nice traditional Chinese font. Likewise if the system looked for "sans:lang=ja", it'll get DejaVu with a nice Japanese font. Before I didn't think this was possible, but now that I see how this font matching is working, it would be weird if it wasn't possible.
    Right now I have these nice Chinese/Japanese fonts installed on my system, but I don't always get to use them (mostly while browsing, if the html is nice enough). I made my system default iYaHei (and the firefly font for serif) because iYaHei covers almost all of CJK and is readable. If I were to put one of the nice Chinese or Japanese fonts as my system default, I'd end up having some glyphs being borrowed from another font, and it looks really ugly when this happens. Monolinguals don't have this problem, because they can just set their system font to their language, and then be done with it, as they'll rarely need to display any glyphs unsupported.
    If anyone can help me, especially with getting a different priority list for different languages, it would be appreciated.

    Hmm, that seems to work fine for one language, but I put 4 languages in there and only the first one I put works properly:
    This would be my fontconfig
    <fontconfig>
    <match>
    <test name="lang" compare="contains">
    <string>zh_TW</string>
    </test>
    <test name="family">
    <string>serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Serif</string>
    <string>Bitstream Vera Serif</string>
    <string>MingLiU</string>
    <string>MingLiU-ExtB</string>
    <string>MingLiU_HKSCS-ExtB</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>zh_TW</string>
    </test>
    <test name="family">
    <string>sans-serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans</string>
    <string>Bitstream Vera Sans</string>
    <string>Microsoft JhengHei</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>zh_TW</string>
    </test>
    <test name="family">
    <string>monospace</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans Mono</string>
    <string>Bitstream Vera Sans Mono</string>
    <string>WenQuanYi Zen Hei Mono</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>zh_CN</string>
    </test>
    <test name="family">
    <string>serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Serif</string>
    <string>Bitstream Vera Serif</string>
    <string>MS Song</string>
    <string>WenQuanYi Bitmap Song</string>
    <string>AR PL New Sung</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>zh_CN</string>
    </test>
    <test name="family">
    <string>sans-serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans</string>
    <string>Bitstream Vera Sans</string>
    <string>Microsoft YaHei</string>
    <string>WenQuanYi Zen Hei</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>zh_CN</string>
    </test>
    <test name="family">
    <string>monospace</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans Mono</string>
    <string>Bitstream Vera Sans Mono</string>
    <string>WenQuanYi Zen Hei Mono</string>
    <string>AR PL New Sung</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>ja</string>
    </test>
    <test name="family">
    <string>serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Serif</string>
    <string>Bitstream Vera Serif</string>
    <string>MS PMincho</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>ja</string>
    </test>
    <test name="family">
    <string>sans-serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans</string>
    <string>Bitstream Vera Sans</string>
    <string>Meiryo</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>ja</string>
    </test>
    <test name="family">
    <string>monospace</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans Mono</string>
    <string>Bitstream Vera Sans Mono</string>
    <string>MS Gothic</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>ko</string>
    </test>
    <test name="family">
    <string>serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Serif</string>
    <string>Bitstream Vera Serif</string>
    <string>Batang</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>ko</string>
    </test>
    <test name="family">
    <string>sans-serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans</string>
    <string>Bitstream Vera Sans</string>
    <string>Malgun Gothic</string>
    </edit>
    </match>
    <match>
    <test name="lang" compare="contains">
    <string>ko</string>
    </test>
    <test name="family">
    <string>monospace</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans Mono</string>
    <string>Bitstream Vera Sans Mono</string>
    <string>UnTaza</string>
    </edit>
    </match>
    <alias>
    <family>Monospace</family>
    <prefer>
    <family>DejaVu Sans Mono</family>
    <family>Arial Unicode MS</family>
    </prefer>
    </alias>
    <alias>
    <family>sans-serif</family>
    <prefer>
    <family>DejaVu Sans</family>
    <family>iYaHei</family>
    <family>Malgun Gothic</family>
    <family>Kartika</family>
    <family>Arial Unicode MS</family>
    </prefer>
    </alias>
    <alias>
    <family>serif</family>
    <prefer>
    <family>Times New Roman</family>
    <family>AR PL New Sung</family>
    <family>MS Mincho</family>
    <family>MingLiU</family>
    <family>MingLiU-ExtB</family>
    <family>MingLiU_HKSCS-ExtB</family>
    <family>MS Song</family>
    <family>UnBatang</family>
    <family>RaghuMalayalam</family>
    <family>Arial Unicode MS</family>
    </prefer>
    </alias>
    <dir>/home/sokuban/.fontmatrix</dir>
    <dir>/home/sokuban/.Fontmatrix/Activated</dir>
    </fontconfig>
    I had to put zh_TW at the very top, otherwise matching for zh_TW would pull up meiryo first. There is still one little problem in that matching for ko will pull up MS Mincho before Batang, but whatever, I don't really care that much. Meiryo and Malgun Gothic also still go before DejaVu Sans for some reason, but this again doesn't really matter, and might actually be a good thing.
    So far setting it like this seems to work to some degree. More of Niconico Douga uses Meiryo now (the search bar and stuff still uses iYaHei, but I don't think much can be done about that), if I run a program with LANG=ja_JP.UTF-8 and it has Japanese support it'll use Meiryo too. But this doesn't work with Chinese. (I guess because I had country codes in my Chinese matching rules) Oh well, this is still a step up, and Trad Chinese with a Simp Chinese font isn't as bad as Japanese with a Simp Chinese font; I've gotten used to seeing it everywhere. (Heck, the book I'm using to study Chinese now is a translation from a book made to study Simplified - and although it is a traditional book, it still uses the same simplified font.)
    EDIT: Actually, it doesn't seem to have anything to do with the program having Japanese support or not. Some programs will use Meiryo, others will completely ignore the fontconfig settings (and use iYaHei). Sonata for example, even though it had a working Japanese localization, used iYaHei, while thunar and mousepad used Meiryo.
    I used to have this bug that pretty much made working in CJK locales impossible, it took a really long time to open up terminals because of the messed up font settings. This seems to be fixed in a Japanese locale, but not a Taiwanese. Again, I guess this has to do with the country code above. (If you use a country code do you need to put a different syntax? Because other than the fc-match -s "sans:lang=zh_TW" results, the Chinese lines don't seem to have any effect—though I guess if that command shows it, they must be affected?)
    Also, I'm not sure if I've been blind and not noticed it until now, but after applying these Changes /all/ kana are using Meiryo. (Unless specified otherwise) This is both a good thing and a bad thing—no, I think it is a bad thing. Because Japanese text uses kana and kanji (CJK unified block). So now when I have a Japanese filename in thunar, the kana shows up using a proper Japanese font, but the Chinese Characters in the name show up using a Chinese font. While this is kind of okay of the fonts look similar, it isn't a good solution because not all fonts are designed to work well with each other, and my main goal in this quest is to avoid having to "borrow" from another font when the default font can't display a glyph properly. (Meiryo and iYaHei kiiinda look similar, so it isn't that bad, but if one day I decided to set my default gtk font to serif for some reason then I'll have problems for sure.) If somehow the system was able to tell if the text was Japanese or Chinese and use the appropriate font, that would be good, but I am aware that that sort of magic is impossible.
    I want the computer to be able to use the correct font when some program specifies the text is in that language (perhaps by the locale, or perhaps by the other magic method niconico uses), but I want the english locale to use iYaHei for everything just to be safe because it works.
    I have tried doing something like:
    <match>
    <test name="lang" compare="contains">
    <string>en</string>
    </test>
    <test name="family">
    <string>sans-serif</string>
    </test>
    <edit name="family" mode="prepend" binding="same">
    <string>DejaVu Sans</string>
    <string>iYaHei</string>
    <string>Malgun Gothic</string>
    <string>Kartika</string>
    <string>Arial Unicode MS</string>
    </edit>
    </match>
    Hoping that that would allow iYaHei to be used as the main fallback while using an English locale, but that doesn't happen; it still uses Meiryo for Kana, but it uses WenQuanYi Zen Hei for Chinese, which looks even worse than Meiryo and iYaHei.
    So now I'm debating whether to use the new configurations or the old configurations. The new configurations fix a few things in Japanese locales, but cause a possibly grave problem in non-Japanese locales. I'm sure it has a few other effects too, but I didn't notice them yet.
    What exactly is this fontconfig format supposed to do? Because it clearly isn't "setting a priority list for fonts to be used in a certain language". It seems more like "setting a priority list for fonts that are labelled as a certain language". Or maybe it just does some random stuff to the fonts described. I can't tell.
    The core of the problem seems to be in the fonts themselves. Somehow, these fonts are claiming to cover "Chinese, Japanese, Korean" etc etc and while they probably do that, most can only cover 1 language in an acceptable way. Where do the fonts store this information? Is there a way to edit this?
    Last edited by sokuban (2009-12-04 19:24:41)

  • I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get into Word?

    I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?

    Hi,
    I checked your account,your Export PDF subscription is in 'Pending' status.
    Once it gets confirmed you will be able to use it.
    Please let us know if you require further assistance.
    Regards,
    Florence

  • When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?

    When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?
    Thanks, Rich

    In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf  type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

  • Fonts are missing in keynote since I use iOS5? help!

    in all my slides for an important presentation the text is disordered because fonts are missing since I downloaded iOS5.
    Can somebodiy help me?

    Judy McCrorey |
    Account Manager and Support
    Unit 1 14 Rothcote Court Burleigh Heads QLD 4220 | Telephone: +61 07 5507 5200
    PO BOX 450 Mudgeeraba QLD 4213 | Facsimile: +61 07 5522 0163
    Email: [email protected] | Web: www.copyline.com.au
    This message (including attachments) is intended for the addressee named above. If you are not the addressee named, you must not disseminate, copy, communicate or otherwise use or take any action in reliance on this message. If you have received this message in error please notify the sender and delete from any computer. Whilst all care has been taken, Copyline disclaims all liability for loss or damage to person or property arising from this message being infected by computer virus or other contamination. We thank you for your co-operation.
    HI SnakEyz02, a screenshot of my gobbledygookness below in dreamweaver. Your help greatly appreciated!

  • Toolbar fonts are white on grey. i use Lucid

    Toolbar fonts are white on grey and almost invisible. Fiefox is ver 3.16.13, installed on Ubuntu 10.04

    You can try some themes to see if that overrides the current colors.<br />
    You can also try a different Ubuntu theme.
    * https://addons.mozilla.org/firefox/themes/

  • Fonts are HUGE now!

    I was messing with my xorg.conf configuration, and thought I would try telling X what my display size was, so that it could compute the correct DPI setting for my display.
    I have a 15.4" widescreen display running at 1680x1050, which comes out to roughly 131 dpi.  At this setting, all of my fonts are huge (by huge, I mean 10pt fonts look like they are 20pt)!  I tried putting in fake display size values to get 100 dpi, 96dpi, etc.
    Here is what I learned.  Almost no OS uses the correct dpi for the display.  Apparently Windows always uses 96 dpi, regardless of what resolution the display really is.  X also defaults to 96 dpi.  A few distros actually set the dpi correctly, and the first thing people complain about is that the fonts are too big.   
    Anyhow, I think I am going to stick with the default 96 dpi setting, since it's what I'm used to.  But if any of you ever see X with abnormally large fonts, check what dpi setting is being used.
    By the way, the relevant setting in xorg.conf is DisplaySize, in the Monitor section.  Here's the syntax:
    Section "Monitor"
    DisplaySize 410 318 # Size (x,y) of the screen, in millimeters
    EndSection

    beniro wrote:Also, if you the width/height you entered in millimeters is correct (You're using a fairly standard 19" or 20" monitor???) and your resolution really is 1680x1050, your dpi is actually: 102 (from left to right) by 84 (top to bottom)...which will give you...a skewed view of the world.
    He said it in his first posting--15.4" widescreen, so it's probably a 16:10 screen, not 4:3. So his numbers seem correct to me. Many laptops have screens with 130dpi and more, nowadays ...
    93,
    -Sascha.rb

  • Fonts are not diplayed correctly in the Crystal Report Viewer control

    Post Author: Farid
    CA Forum: General
    Hello,
    I have designed a report in the Crystal Reports XI Designer (version 11.5.3.417) using the default printer. When I view it through the preview mode of the Designer, fonts are displayed like expected using the default printer driver.
    Now, I view this same report at run time in the Crystal Report Viewer control on the same computer with the same default printer. Fonts appear then differently they were in the preview mode : sizes are differents and some texts are truncated. It seems that the default printer driver are not used.
    Can anybody tell me if this behaviour is normal ? If it is the case how should I do to display a report in the Report Viewer using the default printer driver like I have specified it in the Designer.

    Post Author: V361
    CA Forum: General
    You may want to select the "no Printer" option instead, this will force CR to use a higher resolution.  Look in page setup, printer options.

  • Cannot use 1440x900 resolution with fglrx no matter what I do

    I have used hwd and got a configured xorg.conf and I added "1440x900" to the modes list but it does not work. I have even copied over my working xorg.conf from ubuntu and sabayon and it works for every resolution EXCEPT 1440x900. I seems like everything think I do to add 1440x900 it just ignores it. The xorg.conf below is from hwd and I added the "1440x900" but in GNOME I can only use 1024x768 , 800x600 and 640x480. What am I doing wrong?
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" ""
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 30 - 70 # Warning: This may fry old Monitors
    VertRefresh 50 - 160 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 1
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Last edited by jae1227 (2007-08-13 02:14:47)

    MrWeatherbee wrote:
    If you are having issues with an ATI card as your xorg.conf shows (you also mentioned nvidia, so I'm covering my butt), you may want to see my posts and others in this thread:
    http://bbs.archlinux.org/viewtopic.php?id=35753
    Basically, it discusses that sync, refresh, and modes / modelines don't work very well with "fglrx" driver, at least in my experience. The simplest xorg.conf lines relative to your video card and monitor sections will likely work best. I had similar issues (and more) with trying to include very specific xorg.conf code for those sections, and I had to resort to leaving it close to the bare-bones setup created by aticong  --initial to get everything to work properly.
    I'm back to the radeon driver (for aiglx) now, so I can't do any testing for you. But hopefully the above info let's you know others have had similar issues.
    I tried to do what you said. I ran xorgconfig again and then ran aticonfig --initial. I started up GDM and it did not work, well something worked but my monior said it could not display it. Now my guess is that it could have worked but the resolution was set too high on GDM and my monitor could not handal it. So I added the HorizSync & VertRefresh. Now I have used the  HorizSync & VertRefresh in Ubuntu and Sabayon with fglrx and it works great. I have another computer with an Nvidia card that runs Arch and it works great on this monitor at 1440*900. When I start GDM it picks its own resolutions regradless of what I have in the Modes section. As of now I can display:
    1920x1200
    1920x1080
    1600x1200
    1280x1024
    1280x720
    1152x864
    1024x768
    800x600
    640x480
    Here is my xorg.conf
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # Files section. This allows default font and rgb paths to be set
    # Server flags section.
    # Input devices
    # Core keyboard's InputDevice section
    # Core Pointer's InputDevice section
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    # Device configured by xorgconfig:
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "ServerLayout"
    # The Identifier line must be present
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    Identifier "Simple Layout"
    Screen 0 "aticonfig-Screen[0]" 0 0
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    # This loads the DBE extension module.
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # This loads the font modules
    # Load "type1"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    Load "dbe" # Double buffer extension
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    Load "freetype"
    # Load "xtt"
    EndSection
    Section "InputDevice"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    # Identifier and driver
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    Section "Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier "SyncMaster"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 75.0
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 75.0
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    Identifier "Standard VGA"
    Driver "vga"
    VendorName "Unknown"
    BoardName "Unknown"
    EndSection
    Section "Device"
    # unsupported card
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    Identifier "ATI"
    Driver "ati"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "fglrx"
    EndSection
    Section "Screen"
    Identifier "Screen 1"
    Device "ATI"
    Monitor "SyncMaster"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device "aticonfig-Device[0]"
    Monitor "aticonfig-Monitor[0]"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    And here is my Xorg.0.log:
    [code]X Window System Version 7.2.0
    Release Date: 22 January 2007
    X Protocol Version 11, Revision 0, Release 7.2
    Build Operating System: UNKNOWN
    Current Operating System: Linux AMD 2.6.22-ARCH #1 SMP PREEMPT Thu Aug 2 18:27:37 CEST 2007 i686
    Build Date: 08 April 2007
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 11 14:30:12 2007
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "aticonfig-Screen[0]" (0)
    (**) |   |-->Monitor "aticonfig-Monitor[0]"
    (**) |   |-->Device "aticonfig-Device[0]"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/TTF,
        /usr/share/fonts/Type1
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81c44a0
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 1.1
        X.Org XInput driver : 0.7
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.1
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
    (II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev a3 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
    (II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
    (II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
    (II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
    (II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
    (II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
    (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
    (II) PCI: 00:0a:0: chip 10de,0057 card 1043,8141 rev a3 class 06,80,00 hdr 00
    (II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 01:00:0: chip 1002,710a card 17af,0b12 rev 00 class 03,00,00 hdr 80
    (II) PCI: 01:00:1: chip 1002,712a card 17af,0b13 rev 00 class 03,80,00 hdr 00
    (II) PCI: 05:08:0: chip 1102,0007 card 1102,100a rev 00 class 04,01,00 hdr 00
    (II) PCI: End of PCI scan
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0202 (VGA_EN is cleared)
    (II) Bus 5 I/O range:
        [0] -1    0    0x0000a000 - 0x0000afff (0x1000) IX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 1 I/O range:
        [0] -1    0    0x00009000 - 0x00009fff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
        [0] -1    0    0xd0000000 - 0xd1ffffff (0x2000000) MX[b]
    (II) Bus 1 prefetchable memory range:
        [0] -1    0    0xc0000000 - 0xcfffffff (0x10000000) MX[b]
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
        [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
    (--) PCI:*(1:0:0) ATI Technologies Inc R520 [Radeon X1800] rev 0, Mem @ 0xc0000000/28, 0xd1000000/16, I/O @ 0x9000/8, BIOS @ 0xd0000000/17
    (--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x712a) rev 0, Mem @ 0xd1010000/16
    (II) Addressable bus resource ranges are
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
        [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
        [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [5] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
        [0] -1    0    0xd2000000 - 0xd2000fff (0x1000) MX[b]
        [1] -1    0    0xd2001000 - 0xd2001fff (0x1000) MX[b]
        [2] -1    0    0xd2002000 - 0xd2002fff (0x1000) MX[b]
        [3] -1    0    0xfeb00000 - 0xfeb000ff (0x100) MX[b]
        [4] -1    0    0xd2003000 - 0xd2003fff (0x1000) MX[b]
        [5] -1    0    0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
        [6] -1    0    0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
        [7] -1    0    0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
        [8] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[b]
        [9] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[b]
        [10] -1    0    0x0000c400 - 0x0000c40f (0x10) IX[b]
        [11] -1    0    0x00000b60 - 0x00000b63 (0x4) IX[b]
        [12] -1    0    0x00000960 - 0x00000967 (0x8) IX[b]
        [13] -1    0    0x00000be0 - 0x00000be3 (0x4) IX[b]
        [14] -1    0    0x000009e0 - 0x000009e7 (0x8) IX[b]
        [15] -1    0    0x0000d800 - 0x0000d80f (0x10) IX[b]
        [16] -1    0    0x00000b70 - 0x00000b73 (0x4) IX[b]
        [17] -1    0    0x00000970 - 0x00000977 (0x8) IX[b]
        [18] -1    0    0x00000bf0 - 0x00000bf3 (0x4) IX[b]
        [19] -1    0    0x000009f0 - 0x000009f7 (0x8) IX[b]
        [20] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
        [21] -1    0    0x00004c40 - 0x00004c7f (0x40) IX[b]
        [22] -1    0    0x00004c00 - 0x00004c3f (0x40) IX[b]
        [23] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[b]
        [24] -1    0    0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) Inactive PCI resource ranges:
        [0] -1    0    0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
        [0] -1    0    0xd2000000 - 0xd2000fff (0x1000) MX[b]
        [1] -1    0    0xd2001000 - 0xd2001fff (0x1000) MX[b]
        [2] -1    0    0xd2002000 - 0xd2002fff (0x1000) MX[b]
        [3] -1    0    0xfeb00000 - 0xfeb000ff (0x100) MX[b]
        [4] -1    0    0xd2003000 - 0xd2003fff (0x1000) MX[b]
        [5] -1    0    0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
        [6] -1    0    0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
        [7] -1    0    0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
        [8] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[b]
        [9] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[b]
        [10] -1    0    0x0000c400 - 0x0000c40f (0x10) IX[b]
        [11] -1    0    0x00000b60 - 0x00000b63 (0x4) IX[b]
        [12] -1    0    0x00000960 - 0x00000967 (0x8) IX[b]
        [13] -1    0    0x00000be0 - 0x00000be3 (0x4) IX[b]
        [14] -1    0    0x000009e0 - 0x000009e7 (0x8) IX[b]
        [15] -1    0    0x0000d800 - 0x0000d80f (0x10) IX[b]
        [16] -1    0    0x00000b70 - 0x00000b73 (0x4) IX[b]
        [17] -1    0    0x00000970 - 0x00000977 (0x8) IX[b]
        [18] -1    0    0x00000bf0 - 0x00000bf3 (0x4) IX[b]
        [19] -1    0    0x000009f0 - 0x000009f7 (0x8) IX[b]
        [20] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
        [21] -1    0    0x00004c40 - 0x00004c7f (0x40) IX[b]
        [22] -1    0    0x00004c00 - 0x00004c3f (0x40) IX[b]
        [23] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[b]
        [24] -1    0    0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) Inactive PCI resource ranges after removing overlaps:
        [0] -1    0    0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [5] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
        [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xd2000000 - 0xd2000fff (0x1000) MX[b]
        [5] -1    0    0xd2001000 - 0xd2001fff (0x1000) MX[b]
        [6] -1    0    0xd2002000 - 0xd2002fff (0x1000) MX[b]
        [7] -1    0    0xfeb00000 - 0xfeb000ff (0x100) MX[b]
        [8] -1    0    0xd2003000 - 0xd2003fff (0x1000) MX[b]
        [9] -1    0    0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
        [10] -1    0    0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
        [11] -1    0    0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
        [12] -1    0    0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
        [13] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [14] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
        [15] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[b]
        [16] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[b]
        [17] -1    0    0x0000c400 - 0x0000c40f (0x10) IX[b]
        [18] -1    0    0x00000b60 - 0x00000b63 (0x4) IX[b]
        [19] -1    0    0x00000960 - 0x00000967 (0x8) IX[b]
        [20] -1    0    0x00000be0 - 0x00000be3 (0x4) IX[b]
        [21] -1    0    0x000009e0 - 0x000009e7 (0x8) IX[b]
        [22] -1    0    0x0000d800 - 0x0000d80f (0x10) IX[b]
        [23] -1    0    0x00000b70 - 0x00000b73 (0x4) IX[b]
        [24] -1    0    0x00000970 - 0x00000977 (0x8) IX[b]
        [25] -1    0    0x00000bf0 - 0x00000bf3 (0x4) IX[b]
        [26] -1    0    0x000009f0 - 0x000009f7 (0x8) IX[b]
        [27] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
        [28] -1    0    0x00004c40 - 0x00004c7f (0x40) IX[b]
        [29] -1    0    0x00004c00 - 0x00004c3f (0x40) IX[b]
        [30] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[b]
        [31] -1    0    0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 7.2.0, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
        compiled for 7.1.0, module version = 8.39.4
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.1.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.7
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.1.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.7
    (II) Primary Device is: PCI 01:00:0
    (II) ATI Proprietary Linux Driver Version Identifier:8.39.4
    (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.393.1                 
    (II) ATI Proprietary Linux Driver Build Date: Jul 20 2007 13:50:07
    (--) Assigning device section with no busID to primary device
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
    (--) Chipset Supported AMD Graphics Processor (0x710A) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xd2000000 - 0xd2000fff (0x1000) MX[b]
        [5] -1    0    0xd2001000 - 0xd2001fff (0x1000) MX[b]
        [6] -1    0    0xd2002000 - 0xd2002fff (0x1000) MX[b]
        [7] -1    0    0xfeb00000 - 0xfeb000ff (0x100) MX[b]
        [8] -1    0    0xd2003000 - 0xd2003fff (0x1000) MX[b]
        [9] -1    0    0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
        [10] -1    0    0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
        [11] -1    0    0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
        [12] -1    0    0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
        [13] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [14] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
        [15] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[b]
        [16] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[b]
        [17] -1    0    0x0000c400 - 0x0000c40f (0x10) IX[b]
        [18] -1    0    0x00000b60 - 0x00000b63 (0x4) IX[b]
        [19] -1    0    0x00000960 - 0x00000967 (0x8) IX[b]
        [20] -1    0    0x00000be0 - 0x00000be3 (0x4) IX[b]
        [21] -1    0    0x000009e0 - 0x000009e7 (0x8) IX[b]
        [22] -1    0    0x0000d800 - 0x0000d80f (0x10) IX[b]
        [23] -1    0    0x00000b70 - 0x00000b73 (0x4) IX[b]
        [24] -1    0    0x00000970 - 0x00000977 (0x8) IX[b]
        [25] -1    0    0x00000bf0 - 0x00000bf3 (0x4) IX[b]
        [26] -1    0    0x000009f0 - 0x000009f7 (0x8) IX[b]
        [27] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
        [28] -1    0    0x00004c40 - 0x00004c7f (0x40) IX[b]
        [29] -1    0    0x00004c00 - 0x00004c3f (0x40) IX[b]
        [30] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[b]
        [31] -1    0    0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) fglrx(0): pEnt->device->identifier=0x81e72b8
    (II) resource ranges after probing:
        [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xd2000000 - 0xd2000fff (0x1000) MX[b]
        [5] -1    0    0xd2001000 - 0xd2001fff (0x1000) MX[b]
        [6] -1    0    0xd2002000 - 0xd2002fff (0x1000) MX[b]
        [7] -1    0    0xfeb00000 - 0xfeb000ff (0x100) MX[b]
        [8] -1    0    0xd2003000 - 0xd2003fff (0x1000) MX[b]
        [9] -1    0    0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
        [10] -1    0    0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
        [11] -1    0    0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
        [12] -1    0    0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
        [13] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
        [14] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
        [15] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
        [18] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[b]
        [19] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[b]
        [20] -1    0    0x0000c400 - 0x0000c40f (0x10) IX[b]
        [21] -1    0    0x00000b60 - 0x00000b63 (0x4) IX[b]
        [22] -1    0    0x00000960 - 0x00000967 (0x8) IX[b]
        [23] -1    0    0x00000be0 - 0x00000be3 (0x4) IX[b]
        [24] -1    0    0x000009e0 - 0x000009e7 (0x8) IX[b]
        [25] -1    0    0x0000d800 - 0x0000d80f (0x10) IX[b]
        [26] -1    0    0x00000b70 - 0x00000b73 (0x4) IX[b]
        [27] -1    0    0x00000970 - 0x00000977 (0x8) IX[b]
        [28] -1    0    0x00000bf0 - 0x00000bf3 (0x4) IX[b]
        [29] -1    0    0x000009f0 - 0x000009f7 (0x8) IX[b]
        [30] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
        [31] -1    0    0x00004c40 - 0x00004c7f (0x40) IX[b]
        [32] -1    0    0x00004c00 - 0x00004c3f (0x40) IX[b]
        [33] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[b]
        [34] -1    0    0x00009000 - 0x000090ff (0x100) IX[b](B)
        [35] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
        [36] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin, [x]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.1
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "DPMS" "true"
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.1
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (--) fglrx(0): Chipset: "Radeon X1800 Series" (Chipset = 0x710a)
    (--) fglrx(0): (PciSubVendor = 0x17af, PciSubDevice = 0x0b12)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    (--) fglrx(0): MMIO registers at 0xd1000000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.1.0
        ABI class: X.Org Video Driver, version 1.1
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 9.12
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: R520
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmGetBusid returned ''
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
        compiled for 7.1.0, module version = 8.39.4
        ABI class: X.Org Server Extension, version 0.3
    (--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
    (II) fglrx(0): PCIE card detected
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/lib/xorg/modules//libddc.so
    (II) Module ddc: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.1
    (II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: SAM  Model: 225  Serial#: 1212231993
    (II) fglrx(0): Year: 2006  Week: 42
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
    (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
    (II) fglrx(0): Max H-Image Size [cm]: horiz.: 41  vert.: 26
    (II) fglrx(0): Gamma: 2.35
    (II) fglrx(0): DPMS capabilities: StandBy; RGB/Color Display
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589
    (II) fglrx(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@67Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 832x624@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): 1280x1024@75Hz
    (II) fglrx(0): 1152x870@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
    (II) fglrx(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
    (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
    (II) fglrx(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 106.5 MHz   Image Size:  410 x 257 mm
    (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
    (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
    (II) fglrx(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 81 kHz, PixClock max 140 MHz
    (II) fglrx(0): Monitor name: SyncMaster
    (II) fglrx(0): Serial No: HVELA46878
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0):     00ffffffffffff004c2d250239314148
    (II) fglrx(0):     2a1001030e291a878ad7a5a2594a9624
    (II) fglrx(0):     145054bfef809500950f81808140714f
    (II) fglrx(0):     0101010101019a29a0d0518422305098
    (II) fglrx(0):     36009a011100001c000000fd00384b1e
    (II) fglrx(0):     510e000a202020202020000000fc0053
    (II) fglrx(0):     796e634d61737465720a2020000000ff
    (II) fglrx(0):     004856454c4134363837380a20200091
    (II) fglrx(0): End of Display1 EDID data --------------------
    (WW) fglrx(0): Only one display is connnected,so single mode is enabled
    (II) fglrx(0): Primary Controller - CRT on primary DAC
    (II) fglrx(0): Internal Desktop Setting: 0x00000001
    (II) fglrx(0): POWERplay version 3.  1 power state available:
    (II) fglrx(0):   1. 520/495MHz @ 0Hz [enable load balancing]
    (==) fglrx(0): Qbs disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0):  PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total of 38 modes found for primary display.
    (--) fglrx(0): Virtual size is 1920x1200 (pitch 0)
    (**) fglrx(0): *Mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1920x1200"  193.25  1920 2056 2256 2592  1200 1203 1209 1245 +hsync
    (**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1920x1080"  172.79  1920 2040 2248 2576  1080 1081 1084 1118 +hsync
    (**) fglrx(0):  Default mode "1920x1080": 81.6 MHz (scaled from 0.0 MHz), 33.6 kHz, 30.0 Hz (I)
    (II) fglrx(0): Modeline "1920x1080"   81.64  1920 1984 2176 2432  1080 1081 1084 1119 interlace +hsync
    (**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1600x1200"  162.00  1600 1664 1856 2160  1200 1201 1204 1250
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066
    (**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync
    (**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
    (**) fglrx(0):  Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "1280x1024"   85.51  1280 1344 1480 1680  1024 1025 1028 1083 interlace +hsync
    (**) fglrx(0):  Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1280x1024"   77.80  1280 1344 1480 1680  1024 1025 1028 1077 interlace +hsync
    (**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x720"   74.48  1280 1336 1472 1664  720 721 724 746 +hsync
    (**) fglrx(0):  Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
    (II) fglrx(0): Modeline "1280x720"   60.46  1280 1328 1456 1632  720 721 724 741 +hsync
    (**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900
    (**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1152x864"   96.76  1152 1224 1344 1536  864 865 868 900 +hsync
    (**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
    (**) fglrx(0):  Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "1152x864"   64.67  1152 1208 1328 1504  864 865 868 915 interlace +hsync
    (**) fglrx(0):  Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1152x864"   58.28  1152 1200 1320 1488  864 865 868 911 interlace +hsync
    (**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
    (**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
    (**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
    (**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
    (**) fglrx(0):  Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 772 817 interlace
    (**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
    (**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
    (**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
    (**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
    (**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
    (**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
    (**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
    (**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
    (**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
    (**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
    (**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "512x384"   19.68  512 528 576 632  384 384 385 416
    (**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
    (**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
    (**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
    (**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
    (**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
    (**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
    (--) fglrx(0): Display dimensions: (410, 260) mm
    (--) fglrx(0): DPI set to (118, 117)
    (--) fglrx(0): Virtual size is 1920x1200 (pitch 1920)
    (**) fglrx(0): *Mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1920x1200"  193.25  1920 2056 2256 2592  1200 1203 1209 1245 +hsync
    (**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1920x1080"  172.79  1920 2040 2248 2576  1080 1081 1084 1118 +hsync
    (**) fglrx(0):  Default mode "1920x1080": 81.6 MHz (scaled from 0.0 MHz), 33.6 kHz, 30.0 Hz (I)
    (II) fglrx(0): Modeline "1920x1080"   81.64  1920 1984 2176 2432  1080 1081 1084 1119 interlace +hsync
    (**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1600x1200"  162.00  1600 1664 1856 2160  1200 1201 1204 1250
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066
    (**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync
    (**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
    (**) fglrx(0):  Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "1280x1024"   85.51  1280 1344 1480 1680  1024 1025 1028 1083 interlace +hsync
    (**) fglrx(0):  Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1280x1024"   77.80  1280 1344 1480 1680  1024 1025 1028 1077 interlace +hsync
    (**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x720"   74.48  1280 1336 1472 1664  720 721 724 746 +hsync
    (**) fglrx(0):  Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
    (II) fglrx(0): Modeline "1280x720"   60.46  1280 1328 1456 1632  720 721 724 741 +hsync
    (**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900
    (**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1152x864"   96.76  1152 1224 1344 1536  864 865 868 900 +hsync
    (**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
    (**) fglrx(0):  Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "1152x864"   64.67  1152 1208 1328 1504  864 865 868 915 interlace +hsync
    (**) fglrx(0):  Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1152x864"   58.28  1152 1200 1320 1488  864 865 868 911 interlace +hsync
    (**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
    (**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
    (**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
    (**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
    (**) fglrx(0):  Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 772 817 interlace
    (**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
    (**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
    (**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
    (**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
    (**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
    (**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
    (**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
    (**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
    (**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
    (**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
    (**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "512x384"   19.68  512 528 576 632  384 384 385 416
    (**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
    (**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
    (**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
    (**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
    (**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
    (**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules//libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.1
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.2.0
        ABI class: X.Org Video Driver, version 1.1
    (==) fglrx(0): HPV inactive
    (**) fglrx(0): FSAA enabled: NO
    (==) fglrx(0): FSAA Gamma enabled
    (==) fglrx(0): FSAA Multisample Position is fix
    (==) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) fglrx(0): Depth moves disabled by default
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x4000001f
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): ATI GART size: 128 MB
    (II) fglrx(0): [pcie] 126976 kB allocated with handle 0xdeadbeef
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (==) fglrx(0): EnablePrivateBackZ = NO
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
        [0] 0    0    0xd1000000 - 0xd100ffff (0x10000) MX[b]
        [1] 0    0    0xc0000000 - 0xcfffffff (0x10000000) MX[b]
        [2] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [3] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [4] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [5] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [6] -1    0    0xd2000000 - 0xd2000fff (0x1000) MX[b]
        [7] -1    0    0xd2001000 - 0xd2001fff (0x1000) MX[b]
        [8] -1    0    0xd2002000 - 0xd2002fff (0x1000) MX[b]
        [9] -1    0    0xfeb00000 - 0xfeb000ff (0x100) MX[b]
        [10] -1    0    0xd2003000 - 0xd2003fff (0x1000) MX[b]
        [11] -1    0    0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
        [12] -1    0    0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
        [13] -1    0    0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
        [14] -1    0    0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
        [15] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
        [16] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
        [17] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
        [18] 0    0    0x00009000 - 0x000090ff (0x100) IX[b]
        [19] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [20] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
        [21] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[b]
        [22] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[b]
        [23] -1    0    0x0000c400 - 0x0000c40f (0x10) IX[b]
        [24] -1    0    0x00000b60 - 0x00000b63 (0x4) IX[b]
        [25] -1    0    0x00000960 - 0x00000967 (0x8) IX[b]
        [26] -1    0    0x00000be0 - 0x00000be3 (0x4) IX[b]
        [27] -1    0    0x000009e0 - 0x000009e7 (0x8) IX[b]
        [28] -1    0    0x0000d800 - 0x0000d80f (0x10) IX[b]
        [29] -1    0    0x00000b70 - 0x00000b73 (0x4) IX[b]
        [30] -1    0    0x00000970 - 0x00000977 (0x8) IX[b]
        [31] -1    0    0x00000bf0 - 0x00000bf3 (0x4) IX[b]
        [32] -1    0    0x000009f0 - 0x000009f7 (0x8) IX[b]
        [33] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
        [34] -1    0    0x00004c40 - 0x00004c7f (0x40) IX[b]
        [35] -1    0    0x00004c00 - 0x00004c3f (0x40) IX[b]
        [36] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[b]
        [37] -1    0    0x00009000 - 0x000090ff (0x100) IX[b](B)
        [38] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
        [39] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
    (II) fglrx(0): detected X.org 7.1.0.0
    (II) Loading sub module "glx"
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenByBusid: drmOpenMinor returns 6
    drmOpenByBusid: drmGetBusid reports
    drmOpenDevice: node name is /dev/dri/card1
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card2
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card3
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card4
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card5
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card6
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card7
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card8
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card9
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed

  • My default fonts are all in Bold in most software now. How do I fix this?

    So I installed in a large batch about 1,000 some fonts. I found my old font collection and got WAY to excited. Now however, most applications (Safair, TextEdit, Mail) chose to use a bold verison of Arial instead of regular Arial and when I change the default to specifically detail regular Arial it instead chooses a random font, I don't even remember the name of.
    I've tried messing around in FontBook, turning things off and on..... but then I don't have Arial and every single webpage anywhere uses Arial as a default and so the usability is all off.
    Any suggestions?

    At least one of the fonts you installed is causing a font conflict. Very common with free fonts. A handful (by percentage) of free fonts are well made. The vast majority are less than useless.

  • [Cp6] Fonts are not displayed "real size"

    Hello,
    We're trying to get a consistant look of our productions through various software used and we just discovered that Captivate fonts are displayed smaller than in Word or software from the competition.
    I fear this has something to do with the screen "DPI" the software estimates (72dpi or 96dpi).
    Here you can see the result in Word, Captivate, Flash and Photoshop :
    Any advice or tip about this ?
    Thanks.
    PJ

    I know exactly what you mean, I've been in the print before .
    It's true that in the Adobe products, especially Photoshop, 100% means 1 pixel from image is 1 pixel on screen. Same for Flash, less for Illustrator, vector based and working with document size in cms or inches.
    But, as long as font size is in points, not in pixels, there has to be a link between pixels and actual screen size.
    Here's what I found so far : Office applications rely on screen resolution given by the operating system (Display control panel), which is 96dpi for me, and is correct.
    Adobe applications seem to default to 72dpi. You can alter this in Photoshop ( Preferences > Units and Rulers, and Screen resolution).
    Here's the comparision between 96 and 72 dpi documents in Photoshop (each rectangle is a different document) :
    Plus, Photoshop automatically converted Myriad 39 to Myriad 52 when copy/pasting from the 96 dpi document to the 72 one !
    I can't find the equivalent setting in Captivate, so we'll have to maintain two lists of font sizes to get a consistent look.

  • The fonts are too small on my imac desktop and web browsers.  Where can I increase the size?

    The fonts are too small on my imac desktop and web browsers.  Where can I increase the size?

    babowa wrote:
    The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
    It's a b*&^ch getting old .  I still use the screen zoom instead of decreasing resolution, but maybe soon ...

Maybe you are looking for

  • Premiere Elements 3 Freezes on startup in Windows 7

    I just loaded Premiere Elements 3 on a laptop with Windows 7 and it freezes on startup. I can't find any reference to drivers for Windows 7. I've used PE3 satisfactorily with Windows XP and want to continue to use it. Does anyone have a solution that

  • How to build a query dynamically....

    hi...i want to build a query dynamically. i don't want to build query by using string buffer. i want to create it directly by using sql query itself. my situation is like this....i have four drop down list in a page. The user can search the things ba

  • Report to identify invoices, debit memos and credit memos

    Hi, Just enquiring if there is a report in SAP that will identify all invoices debit memos and credit memos issued within a particular date range. Thank you.

  • Different permissions on separate Airdisk volumes

    Hi there. I have a Drobo connected to an 802.11n Airport Extreme which acts as a Media Server. I'm in the process of ripping CDs and DVDs to it and want to try and make the files as secure as possible. I have set up the Drobo with two volumes. One 'S

  • No emails being issued by grid control

    I am trying to configure GC to send emails. From the preferences page I have added an email address. I have also added an email in the setup, notification methods page. When I test these I get an email as expected. I then set up a test with the archi