Fonts are not available

There are at least 10 people on this forum asking the same
question, with hardly any helpful responses.
I am missing Trade Gothic among others. It is not available
in the Flash font drop-down. It's there in Illustrator, PS,
etc...It's an Opentype font.
The frustrating thing is my boss uses has it installed on his
computer (same file) and it works on his computer (same set-up,
Linotype Font-Explorer etc..).
Seriously, what is wrong with Flash? I've uninstalled,
reinstalled, restarted, repaired disk permissions etc...
So annoying!!!!!!!

install those fonts on your PC.

Similar Messages

  • Suddenly...some fonts are not available.

    InDesign CC 2014 Crashed today. When I relaunched it I found that some of my fonts are not available. I'm on a Mac Pro running Yosemite (10.10)
    For example, two weights of Proxima Nova are available (Light and Regular) but the other weights are not. Those other various font weights are available in other apps (namely Illustrator).
    Below are various screenshots
    1. Screenshot from InDesign
    2. Screenshot from Font Book to show the fonts are active
    3. Screenshot from Illustrator CC 2014 showing these fonts are available there.

    I quite InDesign. Then I did a search and trashed all the AdobeFntXX.lst files that had a two digit number. I deleted the files and rebooted my computer. I then launched InDesign and had the same problem.
    So, I quite InDesign again and deleted my Indesign Prefs and Saved Data file and relaunched. Same problem.
    Very strange... since everything is okay in Illustrator, Photoshop and even an older version of InDesign CS6.

  • Why am I told that fonts are not available when the file was originally created in Fireworks?

    I get the "Fonts not available" message when I open up a document, i.e. open up a png document in the program/computer/etc. where the program was created in the first place.
    I don't get this. How can the fonts not be available when I'm using the same program that used these fonts originally? Having said that, the appearance doesn't seem to change.

    Are the fonts in question installed on your computer?
    Fonts are not part of a program, fonts are installed on a system. Once installed, a font is available to any program that uses fonts. If you're opening a document that was made in the same program, but on a different system, using fonts you do not have installed, then you will get that message.
    So... Are you opening a document that you created? Are you opening the document on the same system on which the document was created? Have you made any changes to the installed fonts (installed or uninstalled any fonts)?
    What version of Fireworks are you using and what OS are you running it on?

  • One or more Fonts are not available

    I have seen this problem on this and other forums in the past
    but I have never seen a response that made sense or lead to a fix:
    I created a flash file a few months ago. It uses a font called
    "microgramma". I now want to make some changes to it and I get this
    message:
    "One or more fonts used by this movie are not available."
    etc...
    The font is a truType font, works fine in every other
    application on my machine, but now for some reason, Flash doesn't
    see it. This is not the first time this has happened to me. It
    would be great if Adobe would address this.
    Flash CS3 on a MAC ppc with OSX 10.4.11

    You should be able to get this to work. (btw - mac guy :) Is
    the Font listed in the Flash 'Library' panel, or are you refering
    to the main Font menu, and embedding? I'm uncertain, and perhaps
    I'm mistaken.
    You can create a Font 'file' the resides in the FLA Library.
    Have you tried using the small icon in the upper right corner of
    the 'Library' panel, and selecting 'new Font...'? this should
    create a complete Font package?

  • SL 10.6.1 and FontExplorer 1.2.3: ll fonts are "Not available"

    After worked fine for weeks, my Mac Pro 2008 quad 2.8 Ghz with 6 Gb ram does not recognize my fonts anymore, just the default system. I can't add neither opentype or truetype or post script. I've cleaned font cache, preferences, sets, reinstalled FontExplorer without luck.
    Again, if I install fonts (not in FontExplorer but in Finder) I can see the preview but they are not available in all softwares.
    Any idea about the cause?

    Hi antonio-milano & welcome to the forums:
    I've cleaned font cache, preferences, sets, reinstalled FontExplorer without luck.
    Have you used Apple's FontBook to validate the suspect fonts?

  • I'm not good with computers or software.  I'm trying to save a RAW Ai file I created.  When I currently save it, the color or characters/size fonts are not coming up in the saved version. How can I save, and have all of my information

    Not going with computers.  Trying to figure out how to save Ai RAW file with colors/fonts etc.  Currently saves, but does not have colors and font information.

    When you say "Colors/Fonts" are not saved, I'm not sure what you mean. How have you determined they were not saved?
    Also, not sure what a "RAW" AI file is. I assume you mean simply a native format .ai file.
    .ai will save all font and color information. It does not "embed" fonts, but it saves what fonts were used and will call the correct fonts when reopened (assuming fonts are available on the system).
    CC 2014 also has a "Package" feature that will collect assets (fonts and images) into a central folder for easy distribution.

  • Fonts shown as installed by Font Book not available to applications

    I have several fonts that Font Book shows as installed that are not available to any of my applications, including Word and Quark Express. These fonts include Arial Bold, Arial Bold Italic, and Arial Italic, all of which I believe were installed as part of OS 10.4, along with several other fonts in the Arial family that are available to my applications. How can I get all my installed fonts to be available to my applications?
    John Link

    HI John,
    Try deleting the FontBook pref file: com.apple.fontbook.plist
    /Users/YourName/Library/Preferences. Drag the .plist file from your Preferences folder to the Trash, empty the Trash and reboot. Launch Word or QE and see if those fonts are available now.
    Validating fonts
    If fonts are not displayed as expected when you open documents or you cannot open documents, it's possible fonts have been corrupted. You can validate fonts to confirm they are still safe to use, and remove any corrupted fonts you find.
    Take care not to remove system fonts, located in /System/Library/Fonts; removing system fonts could cause some applications to quit unexpectedly.
    To validate fonts:
    Open Font Book and select one or more installed fonts to check.
    Choose File > Validate Font.
    In the Font Validation window, review the fonts listed for warnings or errors. Use the pop-up menu to display warnings and errors separately, if necessary.
    For fonts with warnings or errors, click the disclosure triangle next to the font to see which validation rules show errors.
    To remove a corrupted font, click the checkbox next to the font. Make sure fonts you want to keep are not checked. Then click the Remove Checked button.
    You can also use the Console utility to troubleshoot problems with installed fonts. In the console.log window, type "font" or a font name (such as "Arial") in the Filter field to find font-related log messages.
    You can validate font files before installing the fonts. To do so, in Font Book choose File > Validate Files. Browse to and select a font file to validate and click Open. Font Book displays the Font Validation window and indicates whether it found problems with the font.
    Carolyn

  • My font is not available in Illustrator...

    I am attempting to use a font that is available to me in Indesign CS5 and is installed on my computer (a PC), however the font is not available in Illustrator CS5. I have attempted installing the font in the Adobe Common File, but that did not help. I don't understand why a font would be available on my computer in general, but not in Illustrator. Any thoughts?

    May be Illustrator doesn't like it. Yes, I'm not kidding, Illustrator is programmed to be quite picky accepting fonts in its menu - the fonts must be top quality.
    Another thing is to make sure the font is in the Fonts folder in your system and not in some place available to inDesign only like a program's fonts location or if you are using a font manager.

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

  • I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

    I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

    Is there a setting that needs to be set to allow the annotation features?  I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

  • TF400893: Team Foundation Server services are not available.

    Hi Gang
    Am getting
    TF400893: Team Foundation Server services are not available. This is most likely caused by a network error. Please check your connection and try again.
    consistently when trying to access TFS2012 Web Access.  I'm on the same domain as the server and able to login however as soon as I try and access a query it asks me to log in again and then presents me with the above message.
    Any thoughts am trying to get as many ports open as possible however security's pretty tight here.
    Regards

    Hi,
    Thanks for your feedback!
    I recommend you install TFS Power Tools and run a Team Foundation Server Complete Health Check and see if it helps.
    TFS 2012 Power Tools download address:http://visualstudiogallery.msdn.microsoft.com/b1ef7eb2-e084-4cb8-9bc7-06c3bad9148f
    Hope it helps!
    Best Regards,
    Cathy Kong
    MSDN Community Support | Feedback to us
    Develop and promote your apps in Windows Store
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • How do I revert to abackup from time machine? The backups prior to Lyon install are not available  - restore button is not active. I wish to return to Snow Leopard.

    How Do I revert to Snow Leopard from Lyon?
    The backups prior to Lyon install are not available... the restore button is not active.
    thanks!

    You need to do a full system restore from your last Snow Leopard backup.
    See #14 in  Time Machine - Frequently Asked Questions.

  • My fonts are not showing up in CS6

    My fonts are not showing up in CS6, but they are installed.  How do I fix this?

    Please provide some more detail. Are you on Windows or Mac? In which applications are the fonts not showing? And what do you mean by "not showing" (provide a screen shot if possible)?

  • Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

    Guys,
    First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
    Services in error state under the event viewer:
    Event Type:    Error
    Event Source:    CSAgent
    Event Category:    Kernel Rule 
    Event ID:    256
    Date:        7/29/2014
    Time:        11:42:41 AM
    User:        N/A
    Computer:    UNITY
    Description:
    A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
    Event Type:    Error
    Event Source:    CiscoUnity_MALEx
    Event Category:    Error 
    Event ID:    30012
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
    This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
    Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation.  The SysCheck utility may assist in diagnosing the problem.
    Event Type:    Error
    Event Source:    CiscoUnity_Doh
    Event Category:    Error 
    Event ID:    32013
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    Doh logon failed due to messaging component logon error: 8004052eH
    I found and followed to the letter:
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
    I also went ahead and ran GUSI with some mixed results under environment information:
    SQL Version = Microsoft SQL Server  2000 - 8.00.2282: unknown SP
         SQL Edition = Desktop Engine
         Windows version =  5.2 Build 3790: Service Pack 2
         Outlook is not installed on the local server
         MAPI Provider : CDO Version - 6.5.8211.0
         MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
                AvCsMgr : is set to recommended value
                AvMsgStoreMonitorSvr : RegKey not found.  Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvNotifierMgr : RegKey not found.  Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvUMRSyncSvr : is set to recommended value
                CsBMsgConnector : RegKey not found.  Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsBridgeConnector : RegKey not found.  Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsVpimConnector : RegKey not found.  Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
             TCPChimney : Disabled
             RSS : Disabled
             *Pulled from UnityDB Configuration Table*
             ExcludeAllReceipts : 0
             ExcludeReturnReceipts : 0
             DisableSearchFolderUse : 0
             MinSearchFolderLifeHours : 1
             OptimizeSearchFolderUse : 0
    I tried following and deleting the Unity System Profile:
    https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
    But I am still scratching my head. Any direction will be appreciated.

    Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question.  Anyways, this post could serve for future reference. 

  • I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?

    I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?
    Sorry for the long 'subject'!  hahaha  I am new to the community.  This should be fun!

    No, What I mean  is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA. 
    I already change my address and select USA but still I can not download app for USA

Maybe you are looking for