Fonts At Selection Screen
Hey, there.
Does anyone know a way of defining fonts within a selection screen's objects ?
I want to make the labels with a larger font.
Thanks in advance.
Hi,
BOLD
FORMAT INTENSIFIED ON.
WRITE : / 'ABAP'.
FORMAT INTENSIFIED OFF.
Font Size.
By using print controls we can do it.
check the link below for further information
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a95e351ea11d189570000e829fbbd/content.htm
You can increase the font size during printing dynamically. In the Device Types -> formats, which ever format you are using, you can ask your Basis person to edit the format and increase the font size. Also the page setup like portrait, landscape, CPI, etc can be done there itself.
http://www.sap-img.com/basis/how-can-i-print-a3-format-in-sap.htm
regards,
venkat.
Similar Messages
-
How to Change the Font Size in Module Pool Selection Screen?
Hi,
There is a module pool, and I need to change the font size mentioned in the selection screen. Could you plaese tell me, how will I be able to do that?Hi ,
If you are asking for text field , then check the options avaliable in Display tab of Attributes.
Hope this helps you. -
Is there any option to display selection screen text in bold or big font?
Hi all,
Is there any option to display selection screen text in bold letters or with increase font size?
Thanks n RegardsHi,
Just give atry in this way..
open the same program ans selection-screen screen no will be 1000 in se51 screen painter,
go to properties of the texts u want to change then go to display tab and check the checkbox bright.
it may or may not work but this will work in module pool .
just give a try...
Regards,
Suresh. -
Hello,
In a screen I have a SELECTION-SCREEN line which contains a comment, followed by a PARAMETER, followed by another comment, followed by a PARAMETER.
Here is the example code:
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(14) text-s01 FOR FIELD p_1.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_1 LIKE sy-uzeit DEFAULT '000001'.
SELECTION-SCREEN COMMENT 52(3) text-s02 FOR FIELD p_2.
SELECTION-SCREEN POSITION 58.
PARAMETERS: p_2 LIKE sy-uzeit DEFUALT '240000'.
SELECTION-SCREEN END OF LINE.
For some reason the second COMMENT is showing with a different font. Can anyone help me understand why?
Thank you,
Nuno SilvaHi
I test it on my system and noticed the same behavior.
text-s01 = 'TOX'
text-s02 = 'TOX'
We can notice differences between the O and X.
No idea why.
That is SAP
If you found a solution, please post it.
Regards
DSTJ -
Hi,
Can anyone let me know how can I make a text or comment in a selection screen
(SELECTION-SCREEN: COMMENT /1(65) TEXT-005.) to a different color or make it bold?
Thanks.
Uma.
Message was edited by:
UmaHI,
Can you highlight the comment. Use the below code
SELECTION-SCREEN: COMMENT /1(65) TEXT-005 FOR FIELD P_BUKRS MODIF ID SC1
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'SC1'.
SCREEN-INTENSIFIED = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
the above code would highlight your comments. Usually the highlighted text would be in Red or blue color.
Regards,
Vara -
How to change font size on screen
how to change font size on screen
I'm not certain what font sizes you wish to change, when on a page you can use command and the += button to zoom in and make the fonts larger. On the finder desktop you can make what ever is on the desktop larger or smaller from the finder menu click view, custom view options, and adjust the icon size with the slider on the top, and the text using the text size box to select the size that your comfortable with.
Forgot to add these.
http://support.apple.com/kb/PH10876
http://support.apple.com/kb/PH10877
Hope this helps. -
How to add customize message on the variable selection screen in the query
Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
RaniHi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it. -
Trailing space when using SELECTION-SCREEN COMMENT
Hi All,
I need to display a continuous text (length :130) in selection screen. I am trying with SELECTION-SCREEN COMMENT option and i m aware that we can display max of 79 characters. So i split the text into length: 70 & 60 and coded as below
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) text-001.
SELECTION-SCREEN POSITION 73.
SELECTION-SCREEN COMMENT 73(60) text-002.
SELECTION-SCREEN END OF LINE.
Problem is: After displaying first text (text-001), there is a gap of 10-15 characters, then second text starts (text-002). I mean, there is a trailing space.
If i give all text-001 in CAPS, then there is no trailing space. But i dont need to display the text in CAPS.
Do i need to proceed in any other way?, please provide your inputs
VinothYour SAPgui to use a proportional font for texts and descriptions (where "i" is much shorter than "W") when it use a non-proportional for input fields. But it use this non-proportional font for input fields even if input is not allowed.
Try this sample to solve your problem. (But your text will be in a box)
REPORT zfontst.
CONSTANTS ctxt TYPE c LENGTH 80 VALUE 'AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuVvWwXxYyZz'.
PARAMETERS: p1 TYPE c LENGTH 56.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (2) p2a.
SELECTION-SCREEN POSITION POS_LOW.
SELECTION-SCREEN COMMENT (56) p2.
SELECTION-SCREEN END OF LINE.
PARAMETERS: p3 TYPE c LENGTH 56 MODIF ID dsp.
AT SELECTION-SCREEN OUTPUT.
p1 = ctxt.
p2 = ctxt.
p2a = 'P2'.
p3 = ctxt.
LOOP AT SCREEN.
CASE screen-group1.
WHEN 'DSP'.
screen-input = '0'.
ENDCASE.
MODIFY SCREEN.
ENDLOOP.
Regards,
Raymond -
Setting only the TO field on the Created on Field in Selection screen to Current date
Hello,
We have a requirement to Set only the To date in the Created on Field in Selection screen to the Current date, I have tried through Dynamic variable option to set the Date calculation but I am able to see Options to set the Current date to From or From and To Created on Date fields instead of setting the Current date only to To created on Field.
We are in 4.7 and are not supported with user defined variables, Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan>
sunitha j wrote:
> Hi ,
>
> It would br gr8..if u could give some more info about the usage of this class..i mean if i hav to implement it in my program....wat is the necessary data that needs to b copied...
>
> Thanx,
> Sunitha
what Text field you want to change.
Since you are working with Dynpros , you have to split the screen in two parts, and one for the Showing differenet fonts and other your normal Dynpro information.
you need to use the Method ADD_TEXT Did you check the program DD_STYLE_TABLE. -
On Selection Screen - Is it possible to show the text Blinking
Hi,
On selection screen - I have 3-4 Texts. (COMMENT)
User wants to 'Highlight' one of them - If possible want this text 'Blinking'.
How can I do it? Is it possible ?
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
SELECTION-SCREEN COMMENT 1(70) text-004.
PARAMETER: rb_exec RADIOBUTTON GROUP g1.
SELECTION-SCREEN COMMENT 35(30) text-005 FOR FIELD rb_exec. "This Text
SELECTION-SCREEN ULINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 1(70) text-006.
PARAMETER: rb_smry RADIOBUTTON GROUP g1.For making highlighted, you can make it bold - please see below link:
[Bold text|Bold character and font change in some portion of report;
Blinking is not possible in report...
Thanks -
Regarding Selection Screen field making display field in ALV report
Hi All,
In ALV Report, at runtime how can i make the field as Display Field in selection screen .
Thks & Regds
Shaileshhii,
Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
1.demo_dynpro_modify_simple
2.demo_dynpro_modify_screen
if tou are using grid,u can refer to foll link
sequencing / choosing fields in report screen at runtime,
Display the Columns in the grid at run time
rgrds,
Shweta -
Help Needed in At selection screen output
Hi Experts,
I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
Thanks in advance for all your help.example from a checkbox in one of my progs..but you can do same approach with radio butts
parameters p_test as checkbox default abap_on user-command test.
at selection-screen.
if sy-ucomm = 'TEST'.
perform birth_mnth_chck.
endif. -
Help needed in selection screen - Urgent
Hi Experts,
I have a selection screen. I have three radi buttons in that selection screen. Based on the selection of the radio buttons I need to activate corresponding selection screen parameters.
e.g : if radiobutton1 is selected, njo activation needed,
if radiobutton2 is selected, activate selection screen parameter p_one,
if radiobutton3 is selected, activate selection screen parameter p_two.
All three radiobuttons are attached to the same radio button group.
I have assigned the parameters p_one, p_two, p_three to MODIF ID as follows.
p_one - NULL
p_two - t01
p_three - t02.
on the selection of a radio button I want the corresponding parameter to get activated.
please help me.
Regards,
Arul jothi A.hi
jothi
AT SELECTION-SCREEN OUTPUT.
CASE SY-TCODE.
WHEN 'ZEDI6'.
LOOP AT SCREEN.
CASE SCREEN-GROUP4.
WHEN '001'. "Sales order select
SCREEN-ACTIVE = '1'. "1=Active, 0=Don't display
MODIFY SCREEN.
WHEN '002'. "Delivery select
SCREEN-ACTIVE = '0'. "1=Active, 0=Don't display
MODIFY SCREEN.
WHEN '003'. "Invoice select
SCREEN-ACTIVE = '0'. "1=Active, 0=Don't display
MODIFY SCREEN.
WHEN '004'. "PO Select
SCREEN-ACTIVE = '0'. "1=Active, 0=Don't display
MODIFY SCREEN.
regards
praveen -
Compare the input filename in the selection screen
In the selection screen input field
there is an option of selecting the directory and file name and not the extension .
This is used to download the datas
Extension can be selected by using the option button
rtf
csv.
the user has to give only the filename and not the extension.
suppose if the user input is C:\temp\file1.rtf.
Either i should take only the filename
or i should display the message give only the filename and not the extension . its already been selected!!!!
I want to compare the input string contains .doc
how to do the comparison and to get the above results mentiond
Thanks in advanceBecause the requirment is there are two option buttion for selecting the download file format
But unknowingly if the user gives the filename along with the extension. I need to handle that error
giving some error message or information message
By comparing the last 4 letters of the filename.. either.doc or rtf or csv or watever
so how to do that
then after comparing that i should give the user a msg doc type is already selected give only the filename
I hope u understand my req -
Change selection screen in LDB (KDF logical database - NOT HR)
Hi All,
Iu2019d like to use KDF logical database to keep the dynamic selections since user wants to use it but I need to change the selection screen itself. The existing variants for KDF donu2019t meet the user requirements. Some fields I need to hide some add. Like I want to u201Cremoveu201D the field u2018Posting periodu2019 (MONAT) (which is available in dynamic selection screen) and put it on the u201Cmainu201D selection screen.
Do I need to create my own logical database or there is a way around?
Could someone give me a practical advice or sample of solution?
Thanks a lot.Thanks Himanshu,
I did as you suggested but problem is that it does not allow me to hide the whole block.
I have 3 filelds actually on block KD_0 I need to hide (its from selection screen of KDF logical database.)
SELECT-OPTIONS: KD_LIFNR FOR LFA1-LIFNR MATCHCODE OBJECT KRED.
SELECT-OPTIONS: KD_BUKRS FOR LFB1-BUKRS.
SELECTION-SCREEN END OF BLOCK KD_0.
PARAMETERS KD_INDEX AS SEARCH PATTERN FOR TABLE LFA1.
What I did is below. I used sp instead of u201C=u201D since it has many screen for field KD_LIFNR(for frame, text etc).
And when I did just for KD_LIFNR it was hidden but when I did the same for KD_BUKRS it was not hidden . The field has stars u201C*********u201D in it.
Same happen with KD_INDEX. The name of the field is hidden but field not and it filled with ********. Do you have any ideas what it can be?
I debugged it to catch all screen names but no luck
loop at screen.
if screen-name cp 'KD_LIFNR' or
screen-name cp 'KD_BUKRS' or
screen-name cp 'KD_INDEX' or
screen-name = '%B000003_BLOCK_1000' or
screen-name = 'SSCRTEXTS-FRAME_TEXT' or
screen-name = 'SSCRTEXTS-MCID_TEXT' or
screen-name = 'SSCRTEXTS-STRNG_TEXT' or
screen-name = 'SSCRFIELDS-SEARCH_BTN' or
screen-name = '%B025008_BLOCK_1000' or
screen-name = '%F021010_1000' or
screen-name = 'ALCUR' or
screen-name = '%F022012_1000' or
screen-name = 'EXCDT' or
screen-name = 'SSCRFIELDS-UCOMM'.
screen-invisible = '1'.
modify screen.
endif.
endloop.
Maybe you are looking for
-
IDVD launches but thats all it does do!
Hiya I have recently got iLife '09 (I still have '08 on my mac). iDVD launches as you would expect but when I go to create a project and press ok it just doesn't do anything, it doesn't create the file or load anything. Then after a while it just clo
-
My itunes says that my iphone is synced with another itunes. It gives a name but how do i find out which library it is? I working with 2 computers trying to get music off of one and on to my new one.
-
Hi guys, my Itunes loaded up fine until I downloaded the new verion 8. It just came up with error after error installing so I uninstalled Itunes altogether and downloaded Itunes 8 again and tried to reinstall. This is my problem. I click on the Itune
-
Hi, Does anyone know of the main executable filename(s) for Oracle Business Intelligence Enterprise Edition? I want to use a sniffer tool that will detect when OBIEE is installed/running in my environment and I need to be able to identify whether an
-
When I am writing email, the stationery won't open. The tab is there, but clicking on it does nothing.