Fonts flash since my Muse update 7.1
My heading fonts flash a differnt font for a second before showing the correct one. It was fine before the update. I even saw the font (wrong one) in one of the design tabs but now it's gone. When you go to the website it's distracting, any ideas. I tried deleting and redoing, it didn't work.
Hello Linda Farmer,
It sounds like your notifications for mail and messages are not working consistently. I recommend starting by closing all the running apps on the device:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it persists, I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with this article to erase the previous installation of iOS and install a fresh copy:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Thank you for using Apple Support Communities.
Take care,
Sterling
Similar Messages
-
Upload to ftp host stopped working since last Muse update
Since the last update of Muse (CC 2014.3) I'm unable to configure the ftp access in 'upload to ftp host'. It gives me an error notification (as if the user or password are incorrect) and therefore doesn't connect. The server client to which I'm trying to connect immediately blocks my ip address (they say it's because their firewall detects that my ip address is trying to connect to their server using a TCP forbidden door (990). Can someone please help me with this? I've already tried configuring the same ftp connection in dreamweaver, using exactly the same host, user and password and it works fine. Can someone please help me understand what's happening?
Hi Zak,
I'm from Portugal, the hosting provider is Hocnet (www.hocnet.pt). Do you need to know my ftp connection user and password for testing?
I contacted Hocnet earlier today because when I attempted to do the configuration of the 'connect to ftp host' in Muse, suddenly all that is dependent of their server (the access to my website www.luiscovas.com, the e-mails associated with my luiscovas.com account and the ftp accesses) became unavailable, and my browser displayed the message I attach in this message (it says 'Conection blocked for security reasons'). After an hour, my ip was finally unblocked, but until then I couldn't receive or send emails, and I couldn't access my site and the hosting provider through ftp. They told me that their firewall detected that my ip was trying to connect to their server using a TCP forbidden door (990), and so it automatically blocked it.
Please let me know if you need more information to run the tests.
Thanks for your help,
Luís Covas -
Problem with LiveChat since last Muse update
We have Livechat installed on our site through simply inserting code into the html head via page properties. Prior to the latest Muse update, we could see the Livechat window inside Muse in both design & preview mode. Now it does not appear at all, even when exporting to html on my desktop, the Livechat window does not show up on the site. The strange thing is from my Livechat control panel, I can see myself browsing the test site...but from the browser perspective, there is no Livechat option. I tried reinserting the code, but still no go. Any ideas? I'm worried if i take the site liveI would risk Livechat disappearing on my live site, so for now I have kept it just as a test site on my desktop.
Restart your mac
Safe Boot: Hold down the shift key after the chime until the Apple logo appears and the gear is moving.
It will take awhile but you will be asked to login.
Go to your Applications folder> Utilities and launch Disk Utility.
In the left side column, highlight your drive and repair permissions.( button down below)
Empty the trash.
Restart your mac.
hpr3 -
Pull Down Menus Don't Work Since New Muse update
I have only just updated adobe Muse and the pull down menus don't work on my website anymore!
Can someone help me?Hi
Please share the site url , also if you have made any changes to menu before publish/update the site then please revert back the changes and then check.
Make sure the menu type is all pages.
Thanks,
Sanjit -
Since the last update for "numbers", everytime I open numbers I get a notice that a font is missing. I don't care that it's missing and I would like to not see that message. How can I get rid of it?
A document you had open at the time you quit Numbers has a font that you do not have (probably Calibri). You can change the font to one you have OR close the file before you quit Numbers. Numbers will open files you had open when you quit.
Looks like:
The other thing you can do is check the box "Close windows when quitting an application" in "System Preferences > General" -
Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...
elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download. -
Since Adobe Flash ran its latest update on my computer, I have not been able to watch any online videos. How can I fix this problem?
see https://support.mozilla.org/en-US/questions/929196
thank you -
I have had continuous crashes of Adobe Flash since latest update.
I have had continuous crashes of Adobe Flash since Firefox updated 3 or 4 days ago. I uninstalled Flash thru the Add/Remove in Control Panel and reinstalled Adobe Flash. Ran Update and all plugins etc are uptodate. What now to solve the Crash Problem in Farmville, Zoo, and Treasure Island
== This happened ==
Every time Firefox opened
== when there was an update a few days agoIt seems it doesn't matter as since update for my plug ins firefox as a whole as slowed way way down and running resources like crazy. Need to fix this. I have been checking around for answers and dont seem to find an easy solution or update to fix this so ff is fast again. It also doesnt seem to be just when on a page with flash on it. It slows all pages down. Once have like 3 pages / tabs open. Fast computer to so this should be fast as heck like it normally is. Thats one main reason for firefox. Cause it runs fast but now slow as can be as of 3 days ago. I updated flash, all plugins and extensions but still slow.
Anybody have any fixes for this and my like posted issue please share. I will be creating a thread myself on this as well so can post there to if dont mind. -
Flash / flashlight not working since ios 7 update
I have an iPhone 5. Since I've updated to ios7 I have not been able to get the LED light to work. I've tried photo and video, and I've tried the dedicated 'flashlight' button... nothing.
Everything looks right on the screen, just no action in the light. I've tried hooking to itunes and syncing, powering down and restarting things and I even got the newest update fix (7.0.2 or whatever)... no dice.
I took some photos with a flash a few days before I updated, so I'm fairly sure that my hardware isn't damaged.
Any ideas?I had the same problem it's definitely a software issue because the camera would sometimes work in camera apps but now I could not switch cameras at all.
I may have found a solution of course I probably won't get credit for thanks to Apple.
I believe the problem arises from a bug when the camera is used in lock mode, try restarting your phone with the home and power button. Then open your camera in locked mode and set the flash to auto. Maybe take a few pictures, switch the camera back and fourth, turn HDR on and off, but make sure the flash is set to auto before you unlock the phone. Heck even try playing with the flashlight.
After I did this in locked mode to my surprise my camera and flashlight are now fully functional after I have unlocked it with the password. I'm not to sure what triggered this bug but when I first got iOS 7 and played with my phone some how I unlocked the lock screen without putting in a password. Just by using the camera and the notification and control Center, I unlocked the phone which might of triggered the bug. -
Since installing this update today, screen flashing has increased dramatically. Anyone else has this problem and is there a way to remove a software update?
I just had random letters flash like i was typing them but they didnt show up in the typed section. So weird, bad thing is that I didnt have the original keyboard flickering problem but updated anyway cause Im a fool i guess. It only happened while writing an email n was only the letters U n G.
-
Question
since windows 7 updated I noticed I can no longer view anything on you tube. It works fine on Internet Explorer which I don't care to useThere are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].
-
PS CC (since JAN 2014 update) Layer-mask editing causes hangs/crashes
ONLY since JAN 2014 update, PS CC has been hanging/crashing when I paint/edit a layer mask. All may be well at first (or not), but suddenly the display of the mask (or mask overlay on the layer itself, as shown when hitting backslash key) is not shown in full but renders in s-l-o-w-l-y in rectilinear pieces <snapshot below was taken before video card upgraded but is still typical of what I mean>. When I view Windows' Task Manager for PS, I see my CPUs are each working at their upper limits (up to 80+-90+%), varying only by a few points, over a VERY long time... which could be MANY minutes. OR the System has decided PS is Not Responding.
In any case, whenever this happens, it means in all practicality PS CC is not working, so I either kill it or it's crashed.
Now, here's the thing: that VERY file, can immediately be opened in PS CS6 (which I have fortunately kept installed on my computer), and the mask will be as I thought it should be, and I can edit it as I always could, just fine! So it's obviously a PS CC thing, and I do NOT recall this happening prior to the JAN update. It is still a problem after the two subsequent updates.
I have not been able to determine the specific instances when this happens, as it seems to happen whenever I am editing a mask, no matter what size/softness/color brush, what magnification, what view mode, many or few layers, big or small file, etc.
I did upgrade my NVIDIA card (from GeForce GTX 260 [with current driver] to GTX660), just in case it was a factor (maybe kept it from crashing as fast? hard to tell... but it's still an unworkable problem). You can see from my Sys Info shown here from the PS CC Help menu that it should be more than sufficient for any PS CC task, and it's running the latest driver:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2664 MHz
Built-in memory: 16379 MB
Free memory: 12453 MB
Memory available to Photoshop: 14697 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2048
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GTX 660/PCIe/SSE2"
gpu[0].RendererID=4544
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.3221"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20131219000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="6.0.1"
gpu[0].OCLBandwidth=1.16816e+011
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]
I work on digital-photography files, and use a layer mask in almost every file, so this relatively-recent bug is a big PITA, having to switch back and forth between CS6 and CC!
Until there's a fix... is there a way to roll-back my PS CC version to BEFORE the JAN 15, 2014 update?I am not qualified to comment on technical issues; I'm just a user whose son in IT is my 'technical support department.' (But he's not much of a PS user.)
I'm pretty sure, however, that all my Prefs were set to the same things BEFORE the Jan 16, 2014 PS CC update as after (unless the update itself changed something I was unaware of... the settings APPEARED to be the same but I can't easily locate my notes of what my Prefs were from long ago).
And they were the same as the PS CS6 I have had installed on this same system for a very long time, with older video card with older driver, with newer driver; newer video card with newest driver, etc. Yet after that CC update, CC has not (until this workaround) worked re 'the masking bug' for me, yet CS6 has always worked just the same.
So I conclude that the only variable (other than the video card upgrade I did in an attempt to solve this and of course those Windows auto-updates) in this scenario IS something to do with PS *CC*, and after Jan 16, 2014.
As for restarting the machine vs. restarting PS, well, PS is the major player of my system, so when I shut that (and LR) down, I might as well 'clean things up' by Restarting. BTW, I am in the habit of closing and reopening PS (CC or CS6) whenever I finish with a file and load another, in order to get back some of that memory which PS never seems to want to let go. (This is not new to the latest versions, I think. My son says it's a 'memory hog'? ;-) ) I track its memory use in Windows' Task Manager and find that seems to let it 'refresh' itself. (See, I told you I'm not a technical person. ;-) ) But I do not think this has anything to do with the bug. Just a quirk of PS. Like when a tool goes all wonky (for example, its little icon becomes just a 'plus' sign even though the tool is still performing correctly, it's telling me, I think, that it would like to be restarted. And that makes it feel all better... I mean, tool icon reappears.)
Anyway... it's up to Adobe to figure out IF and what may be wrong with PS CC -- it still doesn't work for me as I had it configured at first, and I think it should, right? -- and to fix that... PLEASE. SOON. -
'''I create these types of links.'''
ADD THIS EVENT TO YOUR CALENDAR
<www.afponline.org/pub/cal/ics/CTC_Executive_Roundtable_and_Dinner_FortLauderdale.ics>
Since the last update, instead of getting an appointment in my calendar, i got this page of code, but in IE it still works fine.
BEGIN:VCALENDAR
PRODID:-//Microsoft Corporation//Outlook 12.0 MIMEDIR//EN
VERSION:2.0
METHOD:PUBLISH
X-MS-OLK-FORCEINSPECTOROPEN:TRUE
BEGIN:VEVENT
CLASS:PUBLIC
CREATED:20100803T134051Z
DESCRIPTION:CTC Executive Roundtable\n4:30 – 6:30 p.m. Roundtable \n6:30
– 8:00 p.m. Dinner\nBin 595 (inside the Renaissance - Fort Lauderdale)\n
1230 South Pine Island Road\nPlantation\, FL 33324\n
DTEND:20100903T000000Z
DTSTAMP:20100803T134052Z
DTSTART:20100902T203000Z
LAST-MODIFIED:20100803T134051Z
LOCATION:Bin 595 (inside the Renaissance - Fort Lauderdale)
PRIORITY:5
SEQUENCE:0
SUMMARY;LANGUAGE=en-us:CTC Executive Roundtable and Dinner
TRANSP:OPAQUE
UID:040000008200E00074C5B7101A82E0080000000090812BF6EF32CB01000000000000000
010000000012A2164B6741F4D803D4EEF393A9457
X-ALT-DESC;FMTTYPE=text/html:<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//E
N">\n<HTML>\n<HEAD>\n<META NAME="Generator" CONTENT="MS Exchange Server ve
rsion 08.00.0681.000">\n<TITLE></TITLE>\n</HEAD>\n<BODY>\n<!-- Converted f
rom text/rtf format -->\n\n<P DIR=LTR><SPAN LANG="en-us"><B><FONT FACE="Ca
libri">CTC Executive Roundtable</FONT></B></SPAN><SPAN LANG="en-us"><B></B
></SPAN></P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">4:30
– 6:30 p.m.</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri"> Roundt
able</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri"> </FONT></SPAN><
/P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">6:30 – 8:00 p.
m.</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri"> Dinner</FONT></SP
AN><SPAN LANG="en-us"></SPAN></P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT F
ACE="Calibri">Bin 595 (inside the Renaissance - Fort Lauderdale)</FONT></S
PAN></P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">1230 South
Pine Island Road</FONT></SPAN></P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT
FACE="Calibri">Plantation\, FL 33324</FONT></SPAN><SPAN LANG="en-us"></SPA
N></P>\n\n</BODY>\n</HTML>
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-IMPORTANCE:1
X-MICROSOFT-DISALLOW-COUNTER:FALSE
X-MS-OLK-ALLOWEXTERNCHECK:TRUE
X-MS-OLK-AUTOFILLLOCATION:FALSE
X-MS-OLK-CONFTYPE:0
BEGIN:VALARM
TRIGGER:-PT5M
ACTION:DISPLAY
DESCRIPTION:Reminder
END:VALARM
END:VEVENT
END:VCALENDARStart Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I have found, in the past few days, since the latest update to Mountain Lion, if the Mac is put to sleep, there is no sound available when it wakes. I have to re-start to get sound back. Is this general??
Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
I've tried to update to the June 2014 Muse update. I sign in at Adobe and click on download. The window says the file is downloading, but nothing happens, I've tried using Firefox and Safari. not sure what else to do.
Also, I'm not sure what the AAR window is prompting me to do. It says to pick an application, but I'm not sure what application to pick. I chose Muse (since I am updating that application), but that just sent me back to the original Muse update window to start all over again.
I am on OSX 10.9.3
Is anyone else having this problem?Me Too,
It's really grating me that there seems no response from adobe, I would have expected they produce a troubleshooting guide for common problem's regarding loading new updates, but hey ho there you go ! maybe i'm missing it
Maybe you are looking for
-
Relative Paths in Java Program
Hi All, In one of the java programs i am trying to read a properties file using the Properties class Please find the code below private static final String magicPropFile = "config.prop"; Initial.magicProps = new Properties(); Initial.magicProps.load(
-
Rman error in active passive server
PROBLEM: Rman is not working properly. DATABASE NAMES 1)METALIB 2)PREMO DIAGNOSTIC ANALYSIS: 1) CREATE RMAN_META4 CATALOG IN ‘METALIB’ DATABASE. 2) CREATE RMAN_PRM1 CATALOG IN ‘PREMO’ DATABASE. 3) PREMO DATABASE IS REGISTRED IN ‘RMAN_META4’ CATALOG.
-
Hi, There is a way to something like the code below with using abap method etc... lw_act-langauge = 'EN'. lw_act-role_id = 'ADM'. lw_act-role_desc = 'XXXXr'. APPEND lw_act TO lt_a. lw_act-langauge = 'EN'. lw_act-role_id = 'MANA'.
-
Transfer project structure to referenced files
Is there any way to transfer a project's structure to the folder of it's referenced images? For example, I have a huge folder of images referenced by an Aperture Project. I have manually placed the images into a structure of Albums within the Proje
-
When I go to purchase my song I don't get the option to use the balance that i have on itune card, it only gives me the option to use my credit card