Fonts in Aperture Books

Hi,
I have been struggling with this issue for over a year.
I have several books almost complete in Aperture.
I would like to make some small typographic adjustments to the text in a few books.
Aperture however will not accept this. Any adjusments made using the typographic options in the font
browser will not 'fix' in the book design. Any time the program opens a new window or any operation
the changes are reverted back to a basic font.
I am using professional purchased fonts and still no luck.
I have noticed that the recent version of iphoto now does have this capacity although it has very few pictuire layout options
and is not a 'professional' layout tool - in my opinion.
I have twice submitted this to Apple and waited for several software updates but still no change.
I have used some workarounds like laying out a page in photoshop and then importing, but this
is not the whole answer.
Just wondering if anyone else has noticed this and had some experience of working around the problem.
thanks,
k

You have to put the cursor somewhere on the border of the text box and then right-click.  There, you'll get the options for justifying the text.  Put the cursor where you would re-size the box, and then right-click.

Similar Messages

  • Changing fonts on all pages in Aperture book

    Hi there - anyone know if it is possible to change the font for ALL the pieces of text in one go, in an Aperture book?
    At the moment, all I am able to do is to change them page by page.
    Also, can one edit the page numbers text - font and size?
    Thanks!

    Here are a few ideas for you to consider...
    If you decide to do find/replace, back up your pages first.
    This might be the perfect time to deliver that div's content
    via SSI
    (Server side include)
    (will pay off in the future as well)
    You might just rename your new images with the old image
    names
    (will only work if they are the same size and no change in
    the alt text is
    required)
    "mobirdman" <[email protected]> wrote in
    message
    news:fvaiuk$4r6$[email protected]..
    > I've done this before but can't remember how I did it...
    >
    > I have just changed a div that contains 5 images that
    are linked to
    > different
    > pages and they all have "behaviors"....swap image/swap
    image restore. I
    > had to
    > remove the images and replace them with other images.
    >
    > I have redone all the links on the index page, but I
    don't want to
    > replicate
    > my work on the other 11 pages of the site.
    >
    > Isn't there someway (oops, forgot...I'm in DW CS3) to
    highlight the
    > particular
    > links and js on the index page, then do a "sitewide" or
    "global" change
    > that
    > will add the changes to the rest of the site?
    >
    > Thanks in advance for any assistance.....
    >
    > David Bird
    >

  • Aperture book copyright question!

    Hey...I was wondering if it would be allowed to make Aperture books and resell them....obviously if I do not own the copyright then I a cannot...but let's say I take a bunch of pics of my hometown and make a book and ask Apple for copies of this book...would I be allowed to sell it then?

    Your images, your work, your creation -> your copyright. Aperture is just a tool and the printing service is just a service. If you write a novel using Microsoft Word, you still own the copyright and Microsoft has no rights over your work, no matter how many fancy fonts and formatting features you use. Aperture is no different.
    I'm sure Apple would love you to sell as many copies as you can - especially if you are using their printing service. At worst, they sell more printing services to you as you buy more books. At best, your customers are so impressed that they use Aperture or iPhoto to print books themselves, and Apple sells lots more books.

  • I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?

    I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?

    Kyle,
    Thanks for your response. To be clear, the way I am importing the PDF is by going to New in LiveCycle, and selecting Import a PDF document, and selecting Create and Interactive Form with Fixed Pages.
    I cannot change the forms or pages, as they are created by our local Board. In otherwords, I have tryed used the flowable content, and upon import, not only are the fonts slightly different, but all the important artwork (trade-related) is gone, and is not in the exact positions it was in. The forms must meet the standards to which they were approved by the regional board, and there are state-mandated forms as well.
    What surprises me is that you say this method of Fixed Content isn't used much any more. I would think that a lot of people would have PDF files they would wish to make into fillable, interactive forms without needing to reconstruct the entire document. Perhaps a company that has always done things on paper, and now wishes to use those exact same forms on the computer, with no deviations to looks so they can be printed and match up perfectly.
    I thought about using Acrobat's internal form creation system. However, some of these forms have sophisticated options and the calculation scripts and systems within LiveCycle are very useful. Not to mention that it has a much larger scalability, should we chose to utilize it.
    Any other suggestions? I am so confused why Adobe would force medium-quality import of a PDF, but be so incredibly flexible about every other option in their program.

  • How do I use metadata text box in Aperture Book

    When I hit the button for a text box, I get a text box. Likewise for a new photo box. What I really want is a metadata text box and when I hit that button nothing happens. I have tried it with a photo selected and on a blank page.
    How do I use the metadata text box in Aperture books? BTW I am working on a small sized soft cover book.
    Powerbook G4 1.5   Mac OS X (10.3.6)  

    Do you have a copy of Illustrator installed?
    Then just begin at page 1, read it and practice what you read. Step by step.
    If you don't understand parts of it, dive into the manual as well or ask a question in this forum. But mind that not everybody has a copy of the Classroom in a book. So you need to ask your questions precisely and post screenshots of your artwork.

  • TS3946 Aperture Book: images look fine in Aperture but not in PDF preview.  OS 10.9, Aperture 3.4.5

    Aperture 3.4.5, OS 10.9.  When making a PDF prior to ordering a book, I note that images look fine within Aperture book module, but about 10 out of 100 images look terrible in the PDF.  Shall I ignore this and go ahead and order the book?

    Hi,
    Strangely I'm now having exactly the same problem all of a sudden.  I've been building the book for about a month now (I've made about 6 before without any trouble) and along the way have been producing a pdf of the book to see how it will look.  Yesterday I noticed some of the images seemed to have lost colour when looking at the pdf version and then today, many pictures all of a sudden look exactly like the example you've supplied above. 
    I've tried shutting down my imac and restarting thinking it was a memory issue, have checked if I had any filters activated (which I don't and I haven't used filters in books before either), have tried repairing then rebuilding aperture, copying the book to a new library, new location, opening on a different mac and then printing again but none of this had any positive effect. 
    So from what I understand from your last post, the workaround you came up with was to revert to the original of each image that had the problem and then make the adjustments again? 

  • I need to print my Aperture book locally or myself - How do I do it?

    I ordered a book directly from Aperture; however, it will not be shipped in time for my client. So I'm desperate!
    Can I go to a local printer/photo developing place/Kinkos/National Camera - I don't care where...
    and have them print front & back pages with the same/look quality as the book that I ordered from Apple?
    I would even try printing myself, but I'm not sure what paper to buy...how to imitate the look of the pages...
    Either option...will they print full-bleed?
    Has anyone done this? I could buy a printable book set from Best Buy or something (I know Epson makes some, but I would really like a 11x8.5...just like Apple's so I don't have to re-size)...Any ideas?
    Or can I just buy acid free 100# premium matte paper & have a local printer or photo place print it front & back & then I can put it in a cover?
    But how would they do that? Do I hook up my Mac & upload it to them? Do I save as a PDF & if so, will my quality deteriorate?

    Oh dear. Only advice I can offer is to get on the phone, ring the Aperture print service and offer $$ for urgent delivery.
    I've never done an Aperture book, but remember being able to get a .pdf of a book layout from iPhoto, so you may be able to do the same. You can try taking that .pdf to a local printer, but my .pdf's have all been rgb files, when they need to be cmyk to print "properly". try it though, and let us know what happens?

  • Icc profiles for aperture book printing...

    Do the Aperture Book Printing folks provide icc profiles so I can soft-proof the images beforehand?

    Please note that monitors provide fairly accurate color when the images are saved in an sRGB color space, however, presses are not as reliable...
    Well, Mike, thanks for sharing the info here.
    At one point, in Mark's email to you, as mentioned above in his email from Apple, I have to say I am a little surprised about his statement re: monitors provide fairly accurate... when the images saved in an sRGB colour space...
    It is very tricky statement where it depends on how we define the term "fairly accurate" in monitors. What we don't know if Mark meant by when monitor has been "properly" set up as profiled and calibrated with high-grade calibration hardware. Unless IF the monitor has been proper profiled and calibrated, then his statement would be correct. But IF not profiled or calibrated at all, I am afraid that his statement is incorrect.
    Now these days with newer monitors and newer Apple laptops with better monitor technology, it is still need to be properly profiled and calibrated. It just depends on individual's preference, desire and the purpose of such project whatever someone is working on. While majority of Aperture users' are probably mostly professional photographers or those who are into photography savvy, then colour-managed workflow is a norm. For me, it IS absolute A MUST colour-managed workflow.
    Although, I do a heavy post-production workflow on MacPro where I always have my monitors calibrated. I don't typically calibrate my laptop, though. Because sometimes I forgot to turn off the automatic ambient light in System Preference in Display section. It is a little inconvenience in that case. Unless if I am being away on photographic trips far from Canada abroad, then it is a different story. But not always bring my calibration device with me. Too inconvenience to haul it around at the airports etc. So colour-managed workflow is a must with MacPro in my studio.
    However, other individuals have their own preference, comfort zone and the purpose of such project. Perhaps their workflow set up differently than yours or mine, that is ok.
    But in that email you received from someone at Apple didn't make it clear about that statement about 'fairly accuracy'.
    Then something else is something else actually--when Apple guy said presses are not always.... Again, that is why it is important that you get monitor properly profiled and calibrated. Once it is done properly, then it is all good. But remember, you need to re-calibrate monitor once a week or every two weeks or once month. In order to get pretty close to printed output, always a good idea to soft proof. If needed to make slightly conservative adjustments to your satisfaction or level of expectation, the output would be fairly close to what it is appeared in monitor. When I mean "fairly close" in comparing the output to what you are seeing in monitor with these post-production images used in that output, in fairness, I would estimate fairly close in terms of anywhere in range between 92 to 95 percent - that is very fair conservative perspective on how close in the output vs monitor. It is truly, really, truly rare to get the output 100% as obvious and precise as you are seeing in monitor. If that is the case, and if that is true FOR that person achieved this, this probably means takes that person many years to perfect his/her colour-managed workflow for that matter. Never has been that pretty close, but I'd be shocked if I see mine aced right on spot. I'd be lying to you if I get all output perfect as appeared in my monitors. If I did, that would be incorrect statement.
    It seems a lot of factors and things to do and things need to require in a thoroughly colour-managed workflow production, it is how it is done. But this can also means save money, effort and time if done properly right from the beginning.
    In fairness, I would really wish that guy from Apple should have said a little more obvious and precise with his definition of fairly accuracy with monitors. It doesn't says what kind of monitors he refers to. Low quality, cheap monitors deliver good results? Lot of factors need to be looked at for consideration for yourself.
    Of course, as you can tell that colour management topic is pretty heavy, highly technical and everything in deep thinking with world of colours. It takes years for an individual (both pros and non-pro individuals) finally understand what it is all about. Again, technologies evolve rapid for the better in many cases for new monitors, commercial print equips, advanced ink technology, advanced paper production technology... That goes on effortless endless, actually.
    Hope some of thoughtfu perspective and experience be of some interest, and it is obvious that this discussion probably will attract some more excitement discussion, the more the better. So that every other Aperture users who have the similar issues, they'll definitely want to come to here... And learn and share.
    I also use Blurb too. They are getting better than it was once a couple years ago when Blurb first started. As they add more variety of book sizes, types of paper stock and things like that. This also give someone some flexibility in choosing workflow production using Blurb software or online bookmaking or using PDF to Book service for those who are advanced users that use InDesign layout design app. In that case of PDF to Book, the advanced users would need to download Blurb's preset plug-in to put in InDesign in order to export the PDF output to meet and integrate into Blurb's Preflight Checklist at the time of upload. I use PDF to Book service with InDesign, etc. It is fairly self explanatory and easy to follow steps. Also slightly off topic, but when making Blurb book, to get most out of their product and service with Blurb, in that case, they came up with brilliant resource called Colour Resource Centre designed for making more beautiful books. In that resource centre, it is easy to read and follow.
    I would think this probably shed some insights and understanding the basics of colour management, the whole thing all about this, that and the other all together.
    I would also want other high-powered hard-core Aperture users share their experience with Aperture Book printing service. I'd be happy to share my experience about making Aperture Book vs. Blurb Book through PDF to Book service. However, I would think the export to PDF from Aperture probably has it's own different setting or slightly different configuration inside the PDF engine on Mac for Blurb book. There has been some discussion about wanting a Aperture Plug In for Blurb Book. blurb has been quiet on it, I take that they probably will not develop a special plug-in for Aperture Users. Sorry if it is a little off topic. But somehow someone in the discussion mention Blurb. so...
    Anyhow, hope that helps.

  • Creating a text Page in Aperture Books

    Is it possible to add an introduction text page to my saved PDF book file in Aperture Books?
    (I see there is an option to add pages and photos, but not an option to add text to a page).
    Many thanks for your feedback,
    Will
    Mac Book Pro   Mac OS X (10.4.7)   MacBookPro

    Aperture can't do anything with PDF files (apart from render the first page into an image file).
    But you can add a text page to one of your Aperture book layouts very easily:
    1. Add a new page.
    2. Delete any existing photo and metadata boxes.
    3. Add text boxes as needed.
    Ian

  • What is the best way to create Aperture book from Pages '09 document?

    What is the best way to create Aperture book from Pages '09 document?

    There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
    The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and  create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
    But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos.

  • Color management in Aperture books

    After making a book, I should export it as PDF converting images to the color profile provided by
    the print service. Which is the correct way to do it in Aperture 3 ?
    Opening the print menu from inside an Aperture book we get the standard
    dialogs under "Color matching" (where you can choose  to leave the color
    management either to the printer or to ColorSync) but there is also an "Aperture"
    dialog where you can choose a destination color profile (and also whether to
    apply black point compensation, but no option is left as regards the rendering intent).
    Which is the difference between the two dialogs when printing the book directly to a connected printer ?
    And which is the difference when saving as PDF ?
    In a test done printing to PDF a small book it looks like that the "Color Matching" print dialog
    seems to have no effect on the final PDF.
    The "Aperture" print dialog does have some effect (depending on the choosen destination profile ) but
    I get far big sizes for the PDF (example: 150 MB versus 23 MB for the PDF straight without using
    the "Aperture" print dialog). I have no clear explanation for this huge size increase, but it surely
    cannot be used to submit a full fledged book to the print server (it would give more than 1.2 GB
    in a 40-page book).
    Is there any resource dealing with the PDF export settings for books in Aperture 3 ?
    Thanks,
    Simone

    It looks like this is driven by the content and might be browser dependent - http://www.adobe.com/devnet/flash/quickstart/color_correction_as3.html
    However, I'd try disabling hardware acceleration to see if that makes a difference.  I wouldn't be surprised if using the GPU altered the way this works.
    How do I disable or enable hardware acceleration?

  • Aperture book quality - worse than before?

    Hello everyone,
    My photo studio has been using Aperture for 8 months now and we are very happy with it. We love the organization, web output, etc. We also LOVE the book design layouts, but the quality of the book printing has been degrading over that past few months.
    The first books we printed with Apple (around Nov/Dec 2006) were great, then about 3 months ago, we noticed the labels on the hardcover books went down in qulaity (almost like they were just using a color laser printer), and today we received five books in the mail and the quality is terrible. Also, two of the books have the "Made on a Mac" page in the back (like iPhoto).
    It seemed to me (since I have had books printed by both Aperture & iPhoto) that the older Aperture books were of higher quality than the iPhoto books. Now, it seems as though they are one-in-the-same and our studio cannot have this lower quality book - it is not up to our standards.
    I would gladly use another manufacturer, but every other design software out there for each respective company is terrible and takes three times as long for us to design a single book. I LOVE the integration of the books in Aperture and it makes our timeline two weeks shorter with our clients and that is what sets us apart from other studios in this town.
    Has anyone else had these problems or noticed the change/degridation in the quality of the books?
    Thanks!

    C'mon Apple,
    There is no way you don't know that the quality of your "sticker" covers is horrible. Maybe when you first launched your book service, but it has now been years. I just received three books, and all three have tacky, peeling front stickers.
    Please give us an alternative, even if it costs more, that allows us to show our work with pride. After spending thousands and thousands on computers, software, cameras, lenses, etc., the cover of the books drags that first impression into the ground.
    Thanks!

  • Changing fonts in iphoto book very buggy

    When I tried to change either the font or font size on the cover and it OK, all fonts throughout the book changed. When clicking on return to default all fonts changed again, but not to the original default font........help.

    I found some strange behaviour when changing fonts in a calendar I was producing. I found that clicking on the +Page Design+ button, which reapplies the default design for a particular page, fixed the problem for me. Annoying, though!

  • Font Issues on Book Recieved

    I just received my 60+ page book from Apple.
    I used the same font throughout the book and on 5 pages certain words were printed "hybrid". Meaning that certain characters in a particular word would mix between two fonts. The letters were still correct.
    In addition I had two full bleed pages where one image covered the entire page and I inserted a title over the image. One printed fine, the other had a darkened box around the text.
    Anyone seen anything like this?

    As an update Apple offered a full refund for the book due to the printing issues. It took 5 days of e-mail but I got the desired result.
    Thanks Apple

  • How can i install more korean fonts for mac book pro

    Hello
    I recently purchased mac book pro.
    Where and how can i install more korean fonts for mac book pro?
    thanks guys.

    Do you really need more?  OS X comes with quite a few already: Gungseo, HeadlineA, Nanum Brush, Nanum Gothic, NanumMyungjo, Nanum Pen, PCMyungjo, PilGi, AppleGothic, AppleMyungjo
    If so, just do a google search for korean unicode fonts.

Maybe you are looking for