Fonts in PDF created from Pages doesn't present correctly on Windows PCs

The fonts documents that I'm creating in Pages and then converting to PDF, aren't presenting properly to people using Windows PC's. Some of the fonts are "wonky".
What I'm doing is creating documents in Pages and then creating PDF's either by Print, save as PDF or Share, Export, PDF.
On my MacBook and iPad the PDFs are perfect. However when viewed on Windows, they are wonky. Not all of the document/fonts are messed up. An example of a font that appears wonky, is Baskerville.
I've used Adobe Reader to check whether the fonts appear embedded, and they seem to be there.
This is a huge problem for me because, at the moment, all documents I'm sending to clients who use Windows, are looking really unprofessional.
Any suggestions or solutions?
Anyone else seen this?

Since the problem is to be seen in Adobe Reader for Microsoft Windows, you might want to ask a forum at Adobe.com. There is no way of knowing what you mean by 'wonky.'
The principle is that the scalable glyph shapes in the font program are subset and the subset of glyph shapes is inserted with the start point and the set widths that are used for drawing ('showing') the glyphs in the graphic co-ordinate geometry that you have defined in the document setup dialogue. There are two basic ways to embed Apple SFNT-housed TrueType (which is what your Baskerville is, if it is the one that installs with the system software) in Adobe PDF, either as several font programs each with a max of 256 glyphs or as a single font program within which there are several tiled font programs. Both are basically hacks, because Adobe PDF cannot contain the Unicode and TrueType glyph run complete, the way Adobe PDF 1.3 and higher can in fact contain the ICC ColorWorld complete. But that is a monster bug matrix that is beyond this discussion - only that you need to understand what you are seeing in the dialogue for embedded fonts shown in Adobe Acrobat products. That is, the fonts are always re-encoded and are never the original, intact fonts.
Best,
Henrik Holmegaard
would-be technical writer

Similar Messages

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page. I cannot seem to find any controls to adjust this. Any advice appreciated.

Thanks CtDave, for the further info. Unfortunately, those suggestions are not working, which is strange.
....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF. One simply choses the files, orders them, and creates a PDF. (Resolution doesn't matter; 300 DPI is no problem.) However, my new Photoshop CS5 does not have the option in Automate.
What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF. It worked without a problem, but seems like more work than the old PS method. I will download a newer version of Acrobat to see if that makes any difference.
.....Also, thanks Test Screen Name: I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf). But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
Kind regards,
Prince Nuada

I cannot edit text in a PDF created from scanning

I am using Adobe XI, and I have created a PDF by scanning a document.
When I do click on a paragraph to edit text, all the page appears selected, it seems to be an image. At that moment a message pops up saying: this page has not editable text or digitalized content. The editing tools are disabled, so I cannot edit text.
If I do export a page to Excel or Word, I can edit text there, although there are some kind of data that is not converted properly (even when I have executed OCR).
I have edited preferences, but I am not sure if I did it correctly.
Thanks

I am using Acrobat XI Pro on PC.
Of course, I have done all the steps you mention, but I wanted someone to confirm me if these setting values are correct in order to obtain the best results. I repeat the paragraph of my previous discussion that I want to clarify, just in case some of you can help me, mainly about optimization
I digitalized the document from the scanner. This scanner is installed in the net, so I personalized the settings in Acrobat and I chose memory mode instead of native mode.
Mode color: black on white
Resolution: 600 ppp
As you say in your mail, I understand I should choose ClearScan OCR not searchable just at this moment.
Well, and what about the options of optimization?, JBIG2 (without lost)?, 4 CCITT?
And filters?, I have: activated, low, activated, medium
Are these values congruous or compatible?
Thank you
De: Phillip Jones [email protected]
Enviado el: martes, 27 de noviembre de 2012 18:24
Para: Suárez Suárez, Manuela
Asunto: I cannot edit text in a PDF created from scanning
Re: I cannot edit text in a PDF created from scanning
created by Phillip Jones<http://forums.adobe.com/people/PhillipMJones> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4877588#4877588

Acrobat 9.5, file corruption when combining .pdfs created from Word or Excel (from Office 2010) into a larger .pdf document

In Acrobat 9, when I combine .pdfs created from Word or Excel (from Office 2010) into a larger .pdf document, there is data corruption. Some of the text appears as blank boxes when the pages are inserted into the larger .pdf, the main document. I have so far solved this by "printing" the files to .pdf, and then inserting them into the larger .pdf main document, but this creates a fatter .pdf file that is much larger than would otherwise be the case. Are there any other solutions within Acrobat 9, please? If this bug has been solved in Acrobat X or XI, please advise. Thanks.

As far as the images are concerned, that may be a result of your choice of job settings. You may want to use the Press or Print option if the image quality is important. I assume you are talking about bit images in this case.
As to the hangup, have you checked to see if AcroTray is active on your system? It may not be running as needed. In the meantime, try checking print to file and then opening that file in Distiller to complete the conversion to PDF.
Before you ever try a reinstall, you need to do a repair first to see if that resolves the problem. There are a lot of unknowns about your exact process for the printing and your job settings that may be part of the problem. The rest of your system setup is useful in some cases, but did not help me see your problem.

Acrobat 8 Standard crashes when opening PDFs created from Microsoft Project 2007

Issue: Acrobat 8 Standard crashes when opening PDFs created from Microsoft Project 2007.
OS: Win XP Pro SP3
Error Message(s): None
Details: This issue happens with multiple Microsoft Project files (including new files), multiple PDF creators (included Acrobat 8 Standard) and on multiple computers. We also tried opening the PDFs in Adobe Reader 8 instead of Acrobat Standard 8. There is no record in the event log on the computers of the application crashes.

I may have a resolution now...
I clicked Tools -> Options -> View and turned off Bars and shapes in Gantt views in 3-D" on the advice of someone on a Microsoft Forum. I made three PDFs from three Microsoft Project files (that were having trouble previously) and was not able to get these PDFs to crash when zooming or changing pages. So far so good!
Regards,
Josh Gold
SERA Architects

Adobe 6.0 Pro--PDFs created from multiple PDFs don't have bookmarks from structure?

I'm working with my company's 6.0 Pro (old, I know, but what we've got is what we've got,) on a Windows 7 machine. I've read online that in 6.0, PDFs created from multiple PDFs, by defaut, should have bookmarks from structure that use the original filenames as the bookmark names. I was surprised to read this, because ironically enough this is precisely what I began looking online to see if I could do, and all I could seem to find then were ways to get rid of that function. I don't believe that our installation has been modified in any way, but the binders I'm creating don't automatically have bookmarks from their structure, nor do the bookmarks I'm creating from the structure by menu command have the original file names as their names. Such an automatic bookmark structure w/ that naming scheme would in fact be very helpful in our workflow, as we deal with large volumes of files where outside data paired with file names needs to be one-to-one matched against the actual pdf contents, and opening files individually is time consuming. As of now, when I go to create bookmarks from structure in my document made of multiple pdfs, I have two choices: "Document", which only creates a bookmark to the first page of the whole thing, and "Part," which creates bookmarks to the first pages of all the documents that were combined, with each bookmark named "Part."
We would be satisfied with nameless bookmarks except that the combine feaure is also unreliable. It usually switches the first and last files of the alphabetical order, but not always, meaning that we can't rely on bookmark order to know which file we are looking at once the binder is created.
What I'm hoping to discover is if this behavior for 6.0 Pro is really abnormal and if so, what fixes or workarounds might be available. Thanks.

Just to clarify --
"... should have bookmarks from structure ..."
Not true.
If a PDF is tagged then Acrobat Pro can create new Bookmarks from the PDF's structure (from the Bookmark panel's Options menu).
Currently there is no other mechanism for this.
This may change after PDF-2 (ISO 32000-2) is released but that is still out on the timeline.
Just some things to consider.
When combining multiple PDFs into a new, single PDF click on the Options button and tick "Always add bookmarks..."
This should give you the filename. If a PDF has an entry in its "Title" this will be a bookmark nested under the top (filename) bookmark.
Also, when combining PDFs if there is no entry in "Tiltle" expect to see the filename as a bookmark.
It there is an entry for "Title" expect to see the "Title" entry as the bookmark.
What you describe for the elements/tags "Document" and "Part" are consistent with what they are and how they are permitted to be used in a tagged PDF.
(See ISO 32000-1, Section 14.8)
Be well...

Creating TOC Bookmarks in a PDF created from Microsoft Word

Does anyone know how to modify PDF creation settings so that bookmarks are automatically set from the Table of Contents in the PDF version of a Microsoft Word document? This is possible in Windows using word and Acrobat Pro. But it's not automatic in the OSX-resident PDF creator and I can't find any way to modify preferences. I'm using Word 2004 (11.3.5) for Mac. Thanks!
iMac 21" Intel Mac OS X (10.4.10)

I am using Acrobat XI Pro on PC.
Of course, I have done all the steps you mention, but I wanted someone to confirm me if these setting values are correct in order to obtain the best results. I repeat the paragraph of my previous discussion that I want to clarify, just in case some of you can help me, mainly about optimization
I digitalized the document from the scanner. This scanner is installed in the net, so I personalized the settings in Acrobat and I chose memory mode instead of native mode.
Mode color: black on white
Resolution: 600 ppp
As you say in your mail, I understand I should choose ClearScan OCR not searchable just at this moment.
Well, and what about the options of optimization?, JBIG2 (without lost)?, 4 CCITT?
And filters?, I have: activated, low, activated, medium
Are these values congruous or compatible?
Thank you
De: Phillip Jones [email protected]
Enviado el: martes, 27 de noviembre de 2012 18:24
Para: Suárez Suárez, Manuela
Asunto: I cannot edit text in a PDF created from scanning
Re: I cannot edit text in a PDF created from scanning
created by Phillip Jones<http://forums.adobe.com/people/PhillipMJones> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4877588#4877588

Unable to save a PDF created from a secure webpage in Acrobat X

Hi,
Our Acrobat X standard won't 'save' or 'save as' PDFs created from a password secured website. Same symptom on two machines here. Other PDFs work fine.
The workflow we're using is opening acrobat, selecting create pdf from website, and then specifying a website with an https address and entering a username and password to access the site. This generates a pdf which looks great, all the links work etc... but when you click 'save as,' absolutely nothing happens. You're left just looking at your PDF with no save window or anything opening.
This gets done every day in the office here. I suspect the latest update may have caused the issue?

Hi Bill@VT,
Thanks for your reply!
I checked document properties and security is off. I've also unticked "Enhanced Security" under Security (Enhanced) in the Edit > Preferences menu.
This issue is only affecting our acrobat 10 and acrobat 11 users. I still have a couple acrobat 9 users here and they're unaffected.
The Save As button is not greyed out -- it's available but clicking on it just closes the file menu and does not open the save as dialog box.

Annotations made in Preview to PDFs created from MS Word corrupts PDF

In Preview, when I save annotations to PDFs created from an MS Word document, the PDF seems to be corrupted. Searching in the PDF no longer shows any results, and text copied from the PDF is displayed as a series of meaningless characters when pasted into a note annotation, or pasted into another file (e.g. a TextEdit file). So for example, "the monitoring of progress" becomes ")@%8,1),&12%,=%4&,2&//" when copied and pasted.
Is there any way to prevent PDFs from being corrupted in this way, or to restore the PDF so that searching and copying work correctly?

I suspect this is a problem with M$ failing to handle PDF files correctly. I would suggest you ask your question over on the M$ forums instead of here.
Allan

Adobe Acrobat Pro XI problems printing PDFs created from AutoCAD.

Just installed Adobe Acrobat Pro XI and am having problems printing PDFs created from AutoCAD. Printing other PDF created by MS Word works well. Had a similar problem in an earlier version of Pro. The fix I figure out then was to print the PDF file as another PDF. Using the second PDF to print to a plotter typically worked. It does not work for Adoabe Acrobat Pro XI.

Hi presottom
Please refer ; http://helpx.adobe.com/acrobat/kb/troubleshoot-pdf-printing-acrobat-reader.html
or
Let us know more details about it to help you better ?
What is the OS ?
is there any error message , etc .. ?

Troubles with Pages-impossible to send a pdf doc from pages

Hi, I am having troubles in sending a pdf doc from pages to a pc (via email). It work fine with word doc but not pdf. When I open the email with the pdf doc I just received, the email is empty. What could I do? Please help, I really need pdf! Thanks.

Hi Jerry,
I don't think so, because I can send a word doc but not a pdf?! And my gmail account has plenty of space... And it worked fine before I upated the new version of Ipad. I hope I can find a solution, otherwise I can't use Pages anymore. Any other apps equivalent to Pages?
Thanks anyway.
Alex

PDF export from Pages results in jagged fonts when viewed in Preview

Hi There,
Since installing 10.5.5 I get the following strange behavior: When exporting a file in PDF from Pages certain fonts (such as Palatino) are not shown antialiased anymore when viewed in any Apple software (Preview/Safari). When viewed in Adobe Reader, the fonts appear smooth.
The strange thing is that, when I view PDF files generated last year before updating to 10.5.5 they still show with antialiased (i.e. smooth) fonts in the current Preview/Safari.
It gets even stranger: When exporting the files as .doc into (the resented and ridiculously slow and memory gulping) Word 2008, and then converting them into PDF via the Print command, this phenomenon does not occur, i.e. the fonts look smooth in Preview/Safari.
I would appreciate if anyone had some constructive input to this problem. I would really like to be able avoiding using Word!
Thanks much in advance!

I had the exact same problem that you were describing. I'd create a document in Pages '08, then export it to PDF and I'd find that the text wouldn't be anti-aliased in the PDF.
I was using one of the resumé templates that comes with Pages '08. The template by default sets the font size very low in certain areas of the page, as low a 7. I went through my document and bumped up font sizes that were below 9 and set them to 9. Now when I export to PDF the text looks great.
It was far from obvious to me that the font sizes were linked to the anti-aliasing in my exported PDFs.

OpenType font won't work in PDF created from PM 7.0.1a file

Per my client's request, I had to purchase a lovely new OpenType font, AJenson Pro, for a book project I'm paging using PageMaker 7.0.1a in Windows XP. First it wouldn't print on my postscript HP laser printer, but downloading an updated printer driver from the HP web site easily fixed that problem. But I have done everything I can think of and I can't get the new font to appear in a .pdf created using Acrobat Distiller 5.0.5, which came bundled with PageMaker.
The font shows up in the finished .pdf as boxes with X marks in them instead of letters! I'm not trying to use anything but standard characters (no glyphs, etc.) in the font. I've been using PageMaker and creating .pdf files in Acrobat Distiller 5.0 for years and have had no problems until I got this new font. Adobe Type Manager shows that it is installed and it looks great on the screen.
I purchased the entire AJenson Pro font family from MyFonts.com, so I have bold, bold ital, etc. Their technical support couldn't suggest anything I hadn't already tried.
I'm planning on upgrading my PageMaker to InDesign soon, but I'll need a new computer to meet the minimum system requirements so I've been putting it off. I'm afraid to even download the free 30-day trial on my older computer. Any suggestions on how to get this OpenType font to work in a .pdf created using PM 7.0.1a and Acrobat Distiller 5.0, or do I have to upgrade to InDesign right away? I need to be able to create a .pdf so I can e-mail proofs to my client and eventually to send the finished book to a commercial printer. Thanks!

I have had this same problem myself with most Open Type fonts. It's very irritating, because it seems like most of the new fonts are being issued exclusively in Open Type.
I have developed a work-around, which you can attempt at your own risk.
Purchase the software FontCreator (I use FontCreator 5.6 Home Edition). It's not very expensive.
Open the problem font in FontCreator, and save it with a different name. In the process of saving it, the font will be converted to a TrueType font. Install the new version of the font. In my experience, you can then successfully use the font in Pagemaker, and convert it to a pdf.
This is not a perfect solution because there will be a *very* slight diminishment in the crispness of the lines of the font -- but this is only visible when the font is magnified to something like 6400% in Acrobat. It is not visible to the naked eye, or at least not to my naked eye.

How do I customize the password input page of the PDF documented created from Pages?

Is there a way to customize the password input page of the PDF document created from within Pages?
I created a document in Pages, on exporting I choose PDF, in the Security Options drop down I checked box password required and typed in a password, then clicked Next, then typed in a file name and then clicked Export. This created a PDF file that when I open with preview brings up a red colored page saying:
This PDF is password protected.
Please type the password below.
Password:
I want to change the color and the text and potentially add an image. I may also need to put in instruction in multiple languages not just english.
Please let me know. Thanks all!

Not that I know of.
You could control click on the Pages.app and have a look inside the application package's resources to see if any of it looks like password dialog, but my guess is that it has been encoded in the main part of the application and altering that, even if you could, would probably result in a check-sum error or failure to take updates.
Adobe Acrobat has more control over its .pdfs but its password verification, I think is also part of the application.
Peter

How do I include the discussion lines fron Disqus in a pdf created from a web page?

Space is reserved for the text material but the lines do not appear to have been included. here is the specific web page in question.
Katy Perry Talks Taylor Swift Feud in ‘Billboard’ Super Bowl Issue | Katy Perry, Magazine, Taylor Swift : Just Jared
I tried disqus.com page and the lines are not included in a pdf created there either.

Hi bill_b,
Could you attach the snapshot of the pdf (if possible) or mail me at [email protected] so that i can look into the issue.
Regards,
Rahul

Fonts in PDF created from Pages doesn't present correctly on Windows PCs

Similar Messages

Maybe you are looking for