Fonts in Solaris/Exceed/X-window(Maby standard fonts?)

Hey
I use Styled document where i set the font family to "Arial" and the size to 2*Scale(Scale = 1-10)
when running this in windowsit works well, but on the Solaris/Exceed/X-window it dont. It have the same size all the time!
Probely it is not even using "Arial".
Is ther any standard fonts that i can scale?
I have look in the Xconfig of the hummingbird/Exceed program and then fonts. there i find fonts like
font db file
100dpi
latin1
andrew
and so on
if i dubbel klick on one of them i get a list of fonts in diffrent sizes like this
carb08
carb10
carb12
carb14
and so on.
How could i solve my problem? shold i just choose a name like carb10 and switch it with the "Arial" in the code? and can i scale this fonts or do i have to choose the right font size to?
//SnowJim

Yes that would be great, but i am not able to install fonts on the solaris machine.
Is there no other way? i dont have to use the sam font as in Windows, but a font that is scale able and as Arial as posible.
//SnowJim

Similar Messages

Connecting to solaris Os through Windows 2000

Hello!
how do i connect to solaris Os through Windows 2000
thanks.

how do i connect to solaris Os through Windows 2000TELNET, FTP, and many other Internet Standard mechanisms should work "out of the box". Lots of other ways can be enabled either by configuration changes or installing additional software. If you explain what you want to do, and what you mean by "connect to", someone will be able to give you a more precise answer.

Write access to a directory for ASP 2.0 application stops working on Windows 2012 Standard Cloud Server

Just moved our ASP 2.0 based web application to a Windows 2012 Standard Cloud Server. A directory is used for temporary copying of files for the application. The Read Write access is properly given and everything works but then stops working
in about 2.5 hours. The settings are still there, to make things work again typically I add "Everyone" to the security list and apply and then 3 hours later I remove "Everyone" and this refreshes the security setting and things work
againg for a couple of hours. Last Cloud server was 2008 R2 and we had no issues. Recently moved to this new cloud server. Code has been functioning fine for years and can not migrate it to newer ASP since will have to make quite a few code
changes. Obviously a bug which needs to be addressed. Again the security settings do not disappear but are no longer handled properly every 3 hours or so.

Hi,
Is there any other files have the same issue? Please create a test folder and give the same permissions with the directory for ASP 2.0 application to see if the issue still exists.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How can I add features to Windows 7 Standard Embedded 64-bit?

Hey guys,
I apologize if I am posting in the incorrect place but the embedded forum was specifically for POS Systems it seems.
My problem is that a third party has provided us with some systems that include Windows 7 Standard SP1 (64-bit) for their operating systems. Obviously the OS is cut down and missing a bunch of features (as an embedded OS should be); I need to add some of
the Windows 7 features back in. I know how to do this with DISM but can't find any 64-bit features to install as the Standard 7 Embedded Toolkit seems to be 32-bit only?
Thanks for your help.

Hi,
For how to add packages into Windows standard Embedded 7 64 bit, I suggest we ask in the following forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=quebeceefs
The reason why we redirect is that you will get more professional response in the proper place.
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support

Oracle 11g ODAC 11.1.0.6.21 on Windows 2008 Standard server gives TNS error

Hi,
I have Oracle 11g ODAC 11.1.0.6.21 installed on my Application server that has 32 bit Windows 2008 Standard. The Oracle database 10g is installed on another 2008 server. On database server I can connect using SQLPlus. But on application server I cannot connect using ODAC SQLPlus. I have given correct service name in tnsnames.ora file.
Error is ORA-12154 TNS: Listener cannot resolve service name
What's wrong? Is 11.1.0.6.21 not meant for Windows 2008? I did not get any errors while installing.
This 11.1.0.6.21 works perfectly for me on XP machine.
I have browsed this forum but not getting clear steps to peform.
Can someone guide me what is needed?
Thanks
Shrini

Hi,
The request to connect from the client is reaching the server but it seems the parsing of the service name is either wrong or the information is correct. Here are a couple of suggestions.
If you have a good known set of sqlnet.ora and tnsnames.ora files on another client where the same connection descriptor works, then backup the curreny client network config files and copy the good known files to the Windows 2008 web server where you see the error. Make sure you recycle the worker processes once the files have been copied.
Try to connect via Ezconnect and by pass the config files to see if you get the same error.
//hostname:port/servicenameofdb
where hostname is the machine where the target database is running
port is the port on the DB machine where the tns listener is running and listening
service name is the service name of the target DB
Use this syntax in the connect string box when attempting to connect from SQL PLUS out of the ODAC home.
You can also run lsnrctl utility on the server and vertify there is a handler for the service name or instance that is the target,
HTH
Jenny B.

Not showing company list after installing B1 2007 on windows 2003 standard

Hi gurus,
I am facing a problem regarding B1.System not showing company list after installing B1 2007 on windows 2003 standard edition.
Plz help me.
Thanks in advance
Regds
Maddy

Hi Maddy,
Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
Vasu Natari.

LabVIEW Runtime engine on Windows Embedded Standard 7 P 32/64 bit?

Did anyone ever try to install and run LabVIEW Runtime engine (2011 or later) on Windows Embedded Standard 7 P 32/64 bit?
I am trying to figure out if this will work, for example on a Beckhoff CX5120 embedded PC. I will need to have some simple TCP/IP communication in order to exchange information with another PC, but nothing else, i.e. drivers, etc...
I hope someone tried to do this already. I just don't have the right hardware right now to check it out.
Solved!
Go to Solution.

As NI sells touch panels with WES7 installed here: http://sine.ni.com/nips/cds/view/p/lang/en/nid/210551 it's pretty safe to assume they've used the RTE on WES7.
But yes, it's been done.

FTP from Solaris 10 to Windows

Hi All
If I ftp from my Solaris server to Windwows I can mget files from the Windows Server to Solaris, but when I want to mput files from Solaris back to Windows it starts and stops immediately. The after a while it timeouts. The ftp of the files does start because it put like a 1 or 2 mb of the file in the Windows folder.
This is 50mb .gz files.
Please help.
No help found in from google.

I think i once had a similar problem, but i ended up pushing the files to the window server using 'smbclient' instead, which of course requires an SMB share on the windows host.
I just did something like
/usr/sfw/bin/smbclient //<window server>/<windows share> <password> -c "lcd /local/dir; put $file"
.7/M.

Windows 2008 Standard SP1 will Support MS SQL Server 2008R2 Enterprise Edition ?

Dear ,
Currently we are running MSSQL Server Enterprise 2008 Edition on Windows 2008 Standard Edition 64Bit (.Net 3.0). Now we are upgrading the MSSQL Server to 2008R2 Enterprise with SP2. Will it support to upgrade on the same OS or do we need still upgrade
OS also to Windows 2008 R2?
1. Do we need to upgrade OS from 2008 to 2008R2 Sp2.?
2. MSSQL 2008/2008R2 Enterprise on Windows Standard is compatible ?
Need your help on above details.
Thanks

Hello
Check support matrix:
https://msdn.microsoft.com/en-us/library/ms143506%28v=sql.105%29.aspx#EEx64
need only sp2 if not have to OS.
and check your sql version upgrade path:
https://msdn.microsoft.com/en-us/library/ms143393%28v=sql.105%29.aspx
sorry my english

Ktpass command in windows 2008 standard server

Hi all,
now I need to configure ADsso. can anyone check the ktpass command and suggest me it is correct or not?
environment is here..
Number of DCs              = 3
OS of DCs                    =   windows 2008 standard (SP2)
AD domain functionality =    Mixed mode with 2003
Domain name                = laxman.com
Domain user name        = ssouser
KTpass.exe version       = 6.0.6003.28006
Command is here
=================
1. ktpass –princ ssouser/[email protected] -mapuser ssouser -pass password123 -out c:\output.keytab –ptype KRB 5_NT_PRINCIPAL +DesOnly
2. ktpass –princ ssouser/[email protected] -mapuser ssouser -pass password123 -out c:\output.keytab –ptype KRB5_NT_PRINCIPAL
+DesOnly
3. ktpass –princ ssouser/[email protected] -mapuser ssouser -pass password123 -out c:\output.keytab –ptype KRB5_NT_PRINCIPAL
+DesOnly
Thank you

Hello,
I've been working on this a simillar case since a month!!
I don't want you to wate your time!
AD2008 Standard is not supported.....this is it!!
http://www.cisco.com/en/US/docs/security/nac/appliance/support_guide/agntsprt.html#wp103186
Cisco said it is not tested for 2008 standard, but beleive me, with this TAC case opened for a month, and no answer from the development team till now! You better try 2008 Enterprise.
I tried AD2008 Enterprise R2, and it works like magic!
Hope this will help.
Have a lovely day

LabView executable on Windows Embedded Standard 7

I will like to know if LabView executable with IMAQdx Vision code can be run on Windows Embedded Standard 7. Thanks.

Greetings,
Most certainly, you should be able to use LabVIEW Executables on Windows Embedded Standard 7 that contain Vision VIs. The cRIO 9082 is a great example, for it uses WES7 and brings in GigE Camera support.
Cordially;
Simon P.
National Instruments
Applications Engineer

Windows Server Standard 2012 downgrade to windows 2008 r2 ent. hyper-v vm support

Dear All,
please suggest what i have to purchase for running more than 4 vm in downgraded windpws 2008 r2 ent
if i purchased Windows Server Standard 2012 SNGL OLP NL 2 Processor and installed in one ibm server with downgrade OS windows 2008 r2 & wants to use more than 4 vm on this server.
then what is the way & which license i need to purchase.
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

i have 2 nos license of Windows Server Standard 2012 SNGL OLP NL 2 Processor
if i want to run 8 vm then need another 2 lice..of same??
its depends on processor???????
pls confirm..
SUNIL PATEL SYSTEM ADMINISTRATOR

Installing Oracle 11.2.0.2 64-bit on Windows 2008 standard 64-bit

Getting an architecture error during the prerequisite checks:
Architecture - This is a prerequisite condition to test whether the system has a certified architecture.
Expected Value
: 64-bit
Actual Value
: 32-bit
List of errors:
PRVF-7535 : Proper architecture is not found on node "WS8-DBATEST" [Expected = "64-bit" ; Found = "32-bit"] - Cause: System architecture does not meet the requirement. - Action: Ensure that the correct software bundle is being used.
This is in a VM test environment as we prepare to move to 64-bit. The server is windows 2008 standard and the processor is AMD64 Family 16 Model 9. I have verified the OS is 64 bit by running Winver and verified the CPU is 64bit by running systeminfo. What am I missing?

Is this still a bug? I am encountering this now. Windows server 2008 Standard R2 64 bit.
I need both 32 bit client and 64 bit client for EPM 11.1.2.2 and the order mentioned in that documentation is
first 32 bit and then 64 bit. Is there a fix for this ?

Sun X4150 Can not install Microsoft Window 2003 Standard 32-bit OS

I have try to install Microsoft Window 2003 Standard 32-bit OS in X4150,but put the OS Media and the output show below error messages
"The system is not a supported platform"
I check the sun system handbook and releated document for this X4150 product,it have been certificated.
I try to install with Window 2003 Standard 64-bit OS,it work ok.The Window 2003 Enterprise 32/64 bit,it work ok also.
Have change the CPU Speed (lower),Update the BIOS,ELOM,the same situration.
Have anyone have this experience with the installation of window 2003 Standard 32-bit.
Tks for your help.

Hi,
Have you tried installing using the Sun Installation Assistant disc, for more info see the Sun Installation Assistant for Windows and Linux User's Guide:
http://docs.sun.com/app/docs/coll/x4150

Support of SHA-2 256 in Windows Embedded Standard 7 SP1

Is there support for SHA-2 256 in Windows Embedded Standard 7 SP1 OS?
If so, is there any possibility of setting it through registry settings?

According to this blog:
http://blogs.technet.com/b/pki/archive/2010/09/30/sha2-and-windows.aspx Windows 7 (also WES7) supports SHA2.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Fonts in Solaris/Exceed/X-window(Maby standard fonts?)

Similar Messages

Maybe you are looking for