Fonts missing in INDESIGN 5.5, operating system Win7 64bit?

Used several fonts yesterday today whenopening file are missing.  Yesterday Benquent Bold, in fact all.  Today Braddon Bold missing, have Braddon Reg.  tried reinstalling no luck.  What is the fix?

Please post full details in the InDesign forum. This forum is for suite specific issues only.
Bob

Similar Messages

  • Premiere elemnts zeigt keine Vorschau an. der fortschrittsbalken läuft, aber in der Vorschau erscheint nur ein Standbild. System: win7 64bit, Prozessor: 4-Kern i5; Grafik: FeForce GTX 650

    premiere elemnts 10 zeigt keine Vorschau an. der fortschrittsbalken läuft, aber in der Vorschau erscheint nur ein Standbild. System: win7 64bit, Prozessor: 4-Kern i5; Grafik: FeForce GTX 650,
    Kann das an falschen Einstellungen liegen?

    joselm
    As John as pointed out there is a problem with Premiere Elements 10 on a computer with a NVIDIA GeForce video card/graphics card. The remedy is to roll back the driver
    version to about May 2013. Additional summary can be found
    ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
    However, here is the critical question that comes next when you have Premiere Elements 10/NVIDIA GeForce....What computer operating system are you using?
    There may be no solution for you, if the answer is Windows 8 or 8.1 64 bit. Reason...NVIDIA does not have older drivers for these cards that go back far enough
    for the roll back. If you have Windows 7, you should be able to find a driver dated about May 2013. Please see John's link for Old Drivers, and plug in your information
    to get the driver that you need.
    We will be watching for your results.
    Thank you.
    ATR

  • Fonts missing in InDesign when they really aren't

    I am using Adobe InDesign CS3 on the Windows platform, Windows XP Professional, Version 2002, Service Pack 2.
    When I open certain documents in InDesign, I receive the "missing fonts" message, with certain fonts highlighted. However, when I investigated further to see what the replacement font was(by going into the text box), the missing font was definitely listed in InDesign.
    Missing fonts include Helvetica Neue LT Std 57 Condensed, and Helvetica Neue LT Std 37 Thin Condensed.

    Hey! The fonts were installed via the fonts control panel. I actually don't have admin access at my work computer and have to get the I.T. guy to install the fonts for me (VERY irritating). (Another gripe is that he hasn't been able to figure out a way to give me permissions on Vista's font panel since it doesn't seem to work the same as a regular folder.)
    Some of the fonts that don't work are Type 1 and some are TrueType, but most are the former (I think most all the fonts on my old system were Type 1). I think in some cases there are newer Open Type fonts on the computers that conflict with them somehow or something (?). I don't know. It's very annoying. I suspect if I slaughter all the fonts on the system and just install the old ones things will be okay. I'm hesitant to do that though as there are lots of new fonts I wouldn't mind checking out.
    I blamed Vista because I've had no font problems moving from one XP machine to another regardless of what fonts were already on its system. But now that I've moved up to the new platform many of the fonts just aren't recognized. In one case I found that -- although I couldn't install the fonts from an InDesign package font folder -- they worked when I installed them from the original CD. That didn't make much sense as the files should have been the same.
    But anyway, it's annoying. Most of my previous work can't be opened with the correct fonts any more. Blah.
    Phyllis

  • My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

  • Adobe FIash Player is a 32bit where my operating system is 64bit is this a problem??

    I have a HP110-014 computer and just put it together, but found that it will not allow me to view videos on Youtube and says that I do not have Adobe Flash player on my computer. But when I try to down load Adobe Flash player, it says that Adobe is preinstalled on my Windows 8 operating system. Yet when I check the Adobe Flash player on my system, its the 32bit version and my system is a 64bit version. IUs this a problem?
    This question was solved.
    View Solution.

    Hi,
    It's normal for flash to run as a 32bit exe on a 64bit system.
    If it's not working correctly, try a clean installation of the Flash Plug-in as follows.
    First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows, open your Download folder and run the uninstaller.  After this has completed, restart the notebook.
    Next, ( unless you already have it ), download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    Close all browser windows before running the Flash installer.
    Launch Firefox and see if videos etc play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same Adobe Flash link above to get a prompt to install the ActiveX component.  When done, restart Internet Explorer.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Photoshop CC 64bit Freeze whole System Win7 64bit Pro

    Hi @ll
    houston i have a problem!
    my photoshop freezes during work. when photoshop freezes then is the whole system freezed only an reset help to boot and try again. the freezes startet 3 day ago and comes ONLY in photoshop!
    i tried diferent applications to check out what kind of issue it could be but other CC Apps, Rendering Apps or Gaming with Heavy System Load theres no Problem. I work with the Photosho 64bit Version
    My System Specs
    Intel 3930k
    Gigabyte X79s Mainboard
    32 Gb Ram
    240 SSD Corsair
    120 SSD Corsair
    500 WD Black
    7970 GHZ Edition GPU
    Windows 7 64bit Pro
    Drivers are all up to date. I have read other Freezing Probs but the solutions doesnt help. HAs anyone an idea what could i try to fix or solve this problem because i need the photoshop for my screen design work
    daily!!
    thx and best regards from germany!
    i have tried for 4 hours Photoshop CC 32bit Version and it run stable for the moment with heavy load of work on it using nearly every function to test during design.

    It install both.  Go into programs and load 64 bit version.

  • Chm search function issue in Japanese windows 7/XP Operation System

    search function does not work in Japanese windows 7/XP Operation System

    Sorry, I really don't what the meaning of "Does the file launch? Is it on a network drive?"..
    You know, I create a project file(all contents in every page is english) by using Robohelp 10, then I generate Microsoft HTML Help(chm), during generating,popup a dialog window which says “Html Help settings has unsupported characters for the choosen language. Do you want to continue?”,I choose "yes", It will continue to generate,
    1.After finishing generating, I open this chm document, the search function is OK in Window7 Chinese/English Operation system(32bit/64bit);
    2.Then I send it(chm) to some Japanese  who use window vista/7 Japanese Operation system, the search function is not work

  • I am using your software: CS^ InDesign Suite on a PC using a Windows 7 operating system.     Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar

    Hi,
    I am using your software: CS6 InDesign Suiteon a PC using a Windows 7 operating system.
    Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
    In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
    However, in Windows 7, this is not the case.  Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain.  I cannot see the graphic depictions of options on the left side of the screen. They are all too small.  How can I make your program increase the size?

    CS6 is not high-DPI compatible/ enabled and that can't be changed. If you cannot6 make it work with your operating system means, then short of joining Creative Cloud and using newer versions there is nothing you can do.
    Mylenium

  • I am using CS6 InDesign suite on a PC using a Windows 7 operating system.     Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and

    I am using CS6 InDesign on a PC using a Windows 7 operating system.
    Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
    In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
    However, in Windows 7, this is not the case.  Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain.  I cannot see the graphic depictions of options on the left side of the screen. They are all too small.  How can I make your program increase the size?

    NO way.
    Mylenium

  • When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

    When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

    Apple Mail uses Apple's own PDF viewer, and it's ... well, let's be friendly and say not really up to par. Don't use it for anything else than ascertaining there is *something* in your mail. Then use the free Adobe Reader to view your PDF.
    See this recent thread: http://forums.adobe.com/message/4526583

  • INdesign and 64 Bit Operating Systems

    Been having problems with my INdesign, and the tech people on the support line said it is because I have Vista 64 bit operating system. This sounds very strange to me, as INdesign is the industry standard, and 64 bit operating systems are the norm. Does any one else have experience trying to run INdesign on a 64 bit system?

    Bob's right; I'd suggest ignoring the 64-bit issue and just getting familiar with coming to the forums for assistance. I've worked phone tech-support jobs before; phone support reps are judged by how fast they can get you off the phone, and if you start the call with "Hey, I'm running ID on a 64-bit system" then they can get you off the phone immediately, so you just gave their call-time metrics an easy statistical boost.
    1) So, yeah, the baseline grid will cause stuff to snap to it if you have that setting turned on in the "Grids & Guides" section of the View menu.
    2) "Manual overrides" means that you can format text manually by clicking on the Font menu, and that will cause your formatting to diverge from what is defined in the style. Take a look at the style name; does it have a little plus next to it? That means that the text you've selected diverges from the style. Clear the overrides to return the text to the settings in the paragraph style. You can do this with an alt-click on the style name, or by clicking on the options pulldown in the Paragraph Styles panel and choosing "Clear Overrides." I do it so often that I have a keyboard shortcut set up to do it (in Edit -> Keyboard Shortcuts).

  • HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

    Hi,
    I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
    So basically here are my 2 questions:
    How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
    How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
    Any solutions are very much apreciated!
    Thanks!
    I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
    And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

    WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
    http://www.twocanoes.com/
    Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
    During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
    http://www.paragon-software.com/downloads/demo.html
    I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
    OS X
    Windows
    Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
    https://support.apple.com/kb/HT1427
    https://support.apple.com/kb/HT1553
    There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
    AppleHFS - the abilty to mount and read HFS volumes can be notorious.
    I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

  • Missing Operating System

    I have a Lenovo T500 Thinkpad.  I turned off my laptop and now when I turn on the laptop I receive a message that states "Missing operating system". I do not have any recovery disk or install disk.  How do I fix this error?  The only thing that I have been able to access is via the blue ThinkVantage key.  I receive a screen that has a Startup Interrupt Menu with three options.  ESC to resume normal startup, F1 to enter the BIOS Setup Utility or F12 to choose a temporary startup device.  I see the messages where the drives are partitioned and I should be able to set back to factory standards somehow, but I sure don't know how to even begin. Can anyone help me, as I am clueless.
    Thank you

    Hi kew659 and welcome to the forum!
    Per support page, your T500 came with Win XP pro. Even if you contact lenovo to buy recovery discs, I think they would only sell you Win XP media.
    Try following, it will work if you had a good recovery partition of Vista or XP:- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013955
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Z77A-GD65, "Missing Operating System" after running Live Update

    So here's the brand new computer I assembled:
    $309.99 HIS IceQ Boost Clock H795QC3G2M Radeon HD 7950 3GB 384-bit GDDR5 PCI Express 3.0 x16
    $219.99 Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Processor Intel HD Graphics 4000
    $199.99 Acer G276HLDbd Black 27" 6ms (GTG) Widescreen LED Monitor
    $179.99 Western Digital WD Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
    $159.99 AZZA Hurricane 2000 CSAZ-2000 Black SECC Japanese Steel ATX Full Tower Case
    $154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
    $154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
    $144.99 MSI Z77A-GD65 LGA 1155 Intel Z77 Motherboard with UEFI BIOS
    $119.99 OCZ ZT Series 750W Fully-Modular 80PLUS Bronze Power Supply
    $99.99 Kingston HyperX Beast 16GB (4 x 4GB) 240-Pin DDR3 2400 (PC3 19200) RAM
    $99.99 Logitech G930 USB Connector Circumaural Wireless Gaming Headset
    $99.99 Microsoft Windows 7 Home Premium SP1 64-bit - OEM
    $74.99 ASUS Black Blu-ray Burner SATA BW-12B1ST/BLK/G/AS
    $59.40 CNPS9900MAXR Red CPU Cooler
    $49.95 3YR DATA RECOVERY SERVICE I INT. HD For (WD Black 2TB)
    $34.99 2 yr Replacement W/ ADH plan For (Acer 27" LCD)
    $10.99 LITE-ON SK-2030/B Black PS/2 Wired Slim Keyboard
    $9.99 LITE-ON SK-2035/B Black USB Wired Slim Keyboard
    I wanted to have the SSDs in RAID0 with Win7 and the games on it, then a volume on the 2TB that the RAID backs up to, with the remaining 1.5TB just free storage space in another volume.  I couldn't get raid past Win7's Where Do You Want To Install screen during installation, so I ended up installing the OS on just one SSD.  I figured I'd backup the functioning OS to the 2TB then rebuild the RAID array and copy the OS back onto it.
    The system had been up an running for a full day, being updated left and right nonstop, several big games put in, etc etc, everything was running fine until I decided to run MSI Live Update and started pumping in updates.  Constant errors as I went along, but generally it'd just skip to the next installation attempt.  When it got down to updating the BIOS and did it's DOS injection thing, it for forcefully shut down the PC, restarted, did Post, flashed the BIOS wallpaper, restarted again, Posted, no BIOS wallpaper, just endless "Missing Operating System".  Walked away, went to bed, back up and at it for a few minutes (Will be back tonight for however long it takes to get it fixed).  I switched the BIOS switch over, no dice.  Feels like it's a BIOS "OS" that's gone, and that a BIOS reset/flash is in order or something, but I've never done these things.
    Thanks in advance for any rendered assistance that leads to resolution.

    The SSDs are definitely hooked up where they're supposed to go; the motherboard had a little sticker n' everything for where the two SSD dedicated SATA 6.0gbps ports were :P  AND my case has 2 specific slots for SSDs which don't use the hotswap electronics PCB passthrough like the other 4 bays, which is where the 2T is installed.  I was going to take the 2TB out and hook it up normally and see if that changed the speeds, but I'm leaning towards wishful thinking.  Did I mention I went and made several volumes with different file cluster sizes to test and see if that was the issue?  Alas, all were borked.  It still confuses me though because every once n' awhile it'd do massive burst speeds the way it's supposed to.
    As far as I can recall I'm using up to date BIOS, the last one or two.  One BIOS switch is set for the last BIOS, the other switch is a step back devoid of the Windows 8 stuff.  I believe I have all the drivers up to date as well.  Intel 335's are literally brand new, mine hadn't been more than 3 weeks old off the production line when I received them; IE, they should pretty much have the latest firmware on them which spares me the risk of destroying something precious 
    I MIGHT have a SATA external enclosure around here somewhere, if so, the 2TB could go in that for additional testing until I figure out where it's sustaining speeds of 2-10MB vs 100-150MB/second.
    Meanwhile, the good news is that the system has been fully operational and hella stable.  I hadn't slept in almost 3 days, playing and installing stuff nonstop.  The system continues to run cooler (32c@stock CPU speed) as the thermal paste sets in, the knocking sound of the fan in the PSU has gone away upon me reawakening a bit ago, and amazingly, this massive system (with EIGHT fans) draws only 60-65 watts while desktopping.  That's just astounding 

  • HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

    Hello
    I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition .
    I made an image of it , then deleted win partition from utility disk , ( wrong idea )
    I didn’t notice that boot camp  could erase win partition , anyway I have tried several times , and always after reboot boot camp
    I get the same
    Missing operating system .
    If I boot from dvd install win or if i boot from the boot win partition.
    hd and partitions looks OK to utility disk
    Any idea to fix the problem ?

    I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
    I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
    If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
    I don't know what links you have so i'll just include everything:
    Installing boot camp on a Late 2009 iMac:
    http://support.apple.com/kb/TS3173
    Direct link to Late 2009 iMac-specific Windows drivers.
    http://support.apple.com/kb/DL995
    I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
    Hope this helps.

Maybe you are looking for