Fonts not rendering properly

I'm in Safari on Mountain Lion, however, I had this problem in 10.7 on Firefox/Chrome/Safari.
This is the only website that I've observed this issue with, and it's only when they use this style of headline, all of the others and story text appear as they are supposed to.
Now, I if I attempt to copy the headline, and for instance, paste it in the address bar of Safari, it displays properly: "Are your kids safe on the school bus?"
The website is dmregister.com. It's their front page headline about an investigation into Iowa School buses.

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and the support article linked below for instructions. If Font Book finds any issues, resolve them, then boot in safe mode* (by holding down the shift key at the startup chime) to rebuild the font caches. Boot again as usual and test.
Mac 101: Font Book
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode. In that case only, after running Font Book, launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo atsutil databases -remove
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. After running the command, reboot as usual.

Similar Messages

  • Fonts not rendering properly. Am I missing something?

    I have PS Elements 10 for Mac. I've been trying to figure out why my text is not rendering properly. I type out a word and although caps lock is OFF, the text shows up in all caps. Also, the spacing between letters is wide. I've been trying to search through help and options, but can't find anything. Does anyone have any suggestions on what could be wrong?

    At the far left of the options bar is a tiny triangle. Click it and choose Reset Tool from the popout menu.

  • Fonts Not Rendering Properly in Photoshop Elements 11

    For some odd reason, Elements stopped rendering my fonts properly.  For instance, if I use an old standby like Rage Italic, the lettering is not smooth rather choppy like an old System type font.  I've tried uninstalling and then reinstalling but nothing seems to work.  I also reset the tools and still nothing. 
    My current setup is
    Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
    Operating System: Windows 8 64-bit
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 8
    Processor speed: 3606 MHz
    Built-in memory: 8134 MB
    Free memory: 5692 MB
    Memory available to Photoshop Elements: 3255 MB
    Memory used by Photoshop Elements: 70 %
    Image tile size: 128K
    Image cache levels: 6
    Display: 2
    Display Bounds:=  top: 0, left: 1920, bottom: 1080, right: 3840
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Card Number: 1This i
    Video Card: NVIDIA GeForce GT 640
    Driver Version: 9.18.13.3165
    Driver Date: 20131023000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1920 x 1080 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GT 640
    Video Card Memory: -2047 MB
    This is driving crazy.  Any suggestions would be greatly appreciated.

    I'm not experiencing your problems but the Standard font in Safari is set to Times 16 and Fixed-width font is set to Courier 13.
    See if that helps.

  • Fonts not rendering properly in Safari 3.1 (5525.13) in Leopard

    Most web pages are coming out with strange line spacing -- letters squished together of far apart or completely missing. When I change default font sizes in preferences, it will help one page and cause another to render illegibly. I have my Standard Font set at Times New Roman 12. Should I be using a different version of Times. I just checked and even changing fonts completely doesn't solve the issue.

    I'm not experiencing your problems but the Standard font in Safari is set to Times 16 and Fixed-width font is set to Courier 13.
    See if that helps.

  • Command links are not rendering properly in panel collection toolbar facet

    Hi
    I am using jdev 11.1.2.3.0
    I added toolbar component to the toolbar Facet of panel collection component .
    Under the tool bar I added two command link components with name create and delete,
    the problem is at run time the buttons are not rendering properly,they are hiding,instead of links
    this symbol(>>) is displaying.
    On clicking the symbol,I am able to see the links,I used <af:spacer> after the links but not worked.
    what I have to do to render the links properly in the panel collection toolbar facet

    Hi Timo
    This is the code and I am using 11.1.2.3.0
         <f:facet name="toolbar">
                    <af:toolbar id="t1">
                            <af:commandImageLink icon="#{resource['images:create.png']}" text="Create" id="cbInsert">
                            <af:showPopupBehavior popupId="p1"/>
                        </af:commandImageLink>
              </af:toolbar>

  • Command links are not rendering properly in the toolbar facet of panel collection

    Hi
    I am using jdev 11.1.2.3.0
    I added toolbar component to the toolbar Facet of panel collection component .
    Under the tool bar I added two command link components with name create and delete,
    the problem is at run time the buttons are not rendering properly,they are hiding,instead of links
    this symbol(>>) is displaying.
    On clicking the symbol,I am able to see the links,I used <af:spacer> after the links but not worked.
    what I have to do to render the links properly in the panel collection toolbar facet

    Hi Timo
    This is the code and I am using 11.1.2.3.0
         <f:facet name="toolbar">
                    <af:toolbar id="t1">
                            <af:commandImageLink icon="#{resource['images:create.png']}" text="Create" id="cbInsert">
                            <af:showPopupBehavior popupId="p1"/>
                        </af:commandImageLink>
              </af:toolbar>

  • Hindi fonts not rendering in html pages

    Hindi fonts not rendering in when html pages are run except the mangal and devnagri font.
    Is that a bug or a problem which i am not able to tackle.
    Mozilla browser shows error in console that (font download failed or The character encoding of the HTML document was not declared. The document will render with garbled text in some browser configurations if the document contains characters from outside the US-ASCII range.
    downloadable font: download failed (font-family: "Kruti Dev 010" style:normal weight:normal stretch:normal src index:0): status=2147500037
    source: file:///D:/epub/filename/OEBPS/Fonts/k010.otf @ file:///D:/epub/filename/OEBPS/Styles/style.css).
    Please reply soon.
    Thanks.

    Download and install hindi font from [http://hindi-fonts.com Hindi Fonts] .

  • TaskMenu is not rendering properly using rendered attribute withSecurityCxt

    Hi All,
    I am trying to use this code rendered="#{!(securityContext.userInRole['ZPM_ENT_MARKETING_BUDGET_MANAGER_DUTY'])}" in the itemNode UI component of my Budget_taskmenu.xml. But UI is not rendering it properly.
    I have checked the same code in the backing bean and it is returning true and false as per expectation but at UI level my menu is not coming properly (it is coming as #{null} in place of name in menu).
    But same piece of code is working fine in my .jsff file where I am doing the same check in rendered attribute.
    rendered="#{!(securityContext.userInRole['ZPM_ENT_MARKETING_BUDGET_MANAGER_DUTY'])}"
    Any Suggestion.
    Regards,
    Sarvesh Kaushik

    Hi Frank,
    Thanks for your reply.
    But I found the actual root cause of the issue.
    There is nothing wrong in the expression rendered="#{!(securityContext.userInRole['ZPM_ENT_MARKETING_BUDGET_MANAGER_DUTY'])}".
    The actual issue with my code was one label name was wrong bcoz of which menu was not rendering properly.
    Thanks and Regards,
    Sarvesh Kaushik

  • MyFaces schedule component is not rendering properly.

    Hello everybody.
    I am trying to use the Tomahawk schedule component with Jdeveloper 10.1.3.2. It is not rendering properly.
    The schedule entries and the header line are mising for weeks.
    I removed the default-render-kit-id element from the faces-config.xml. Nothing changed.
    Used versions:
    - Jdeveloper 10.1.3.2
    - myFaces 1.5.1
    - tomahawk 1.5.1
    Any suggestions?
    Thanks.

    Hi,
    did you post this question on the MyFaces open source list?
    Frank

  • CQ page is not rendering properly. It is not rendering HTML. It is showing HTML source code as is.

    On some of the pages, I am getting this weird behavior wherein page is not rendering properly. It is showing HTML source code as is. Could you please help me out? What could be the issue? And how can we get rid of the same?

    Check your component jsp page. it is possible that it is just plan file without directives <@ or you might have miss to close tag which is creating source as text to render
    Paste your jsp code in case you need further help
    Thanks,
    Ajit

  • Why are previews in Bridge blurry (not rendering properly)?

    Why are previews in Bridge blurry (not rendering properly)?
    I found a simple answer to this question: control click on the thumbnail and select "purge cache for selection"
    After years of intermittently having this problem, this solved the issue. I had just finished a fresh install of main sys hd (new hd) and first time opening bridge encountered this issue again after not having the problem for a few years.
    Hope this helps others.  

    Why are previews in Bridge blurry (not rendering properly)?
    I found a simple answer to this question: control click on the thumbnail and select "purge cache for selection"
    After years of intermittently having this problem, this solved the issue. I had just finished a fresh install of main sys hd (new hd) and first time opening bridge encountered this issue again after not having the problem for a few years.
    Hope this helps others.  

  • The drop-down menu is not rendered properly with iframe where a pdf is embedded

    I want to embed a pdf in a webpage, where the drop-down menu needs to be displayed on the top of the pdf. I am using iframe to embed the pdf.
    The drop-down menu is not properly rendered (border-radius and box-shadow) in Firefox at http://mysite1.webege.com/test.html.

    *[https://bugzilla.mozilla.org/show_bug.cgi?id=779435 bug 779435] - the drop-down menu is not rendered properly with iframe where a pdf is embedded
    It is usually best to attach a minimal test case to the bug report.<br />
    In that case the code doesn't get lost if the page is removed from the server.

  • Crystal report not rendering properly on Mozilla ?

    Hi,
    We are using VS2008,CR2008 on server 2012. In Chrome & IE CR working properly.
    But when I am using Mozilla with updated version not rendering properly.

    This is an old version of this issue that might give some insight:
    *[http://stackoverflow.com/questions/19768144/crystal-report-v10-5-toolbar-not-visible-on-firefox-but-visible-on-ie-and-chrome]
    also (but I am not sure what version you are using): " CR 10.5 is one of the versions that was not updated to support IIS7." from [http://www.experts-exchange.com/Database/Reporting/Crystal_Reports/Q_28350929.html]
    It might be ideal to ask a developer in stackoverflow.com or file a bug with webcompat.com for expert investigation for crystal reports. I am sorry I could not be more helpful.

  • PDFs not rendering properly with hpeprint or AirPrint

    Both my iPhone 4 and my iPad 2 connect to my LaserJet Pro 400 color MFP M475dn (connected via ethernet cable to an Apple Airport Extreme) and print most things just fine. However, when I use either hpeprint or Apple AirPrint options to attempt to print, PDFs are NOT rendered properly... the graphic logos appear ok on a PDF document, but text is a complete, incomprehensible mess. I have the latest firmware and software. Any ideas? Despite all the latest firmware and software, could it be a driver issue?Thanks in advance.

    Hi CTU_Agent, 
    Your LaserJet Pro 400 color MFP M475dn is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
    You may find the commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Hope you find the help you need;
    RobertoR
    Remember ▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Stylesheet not rendering properly on child site

    I have a stylesheet in the Style Library of a parent publishing site.  A Master Page in a child site is using the stylesheet, but the styles are not rendered properly.  I copied the same stylesheet and used it in an ASP.NET web form Master Page
    and the styles rendered properly.  I then created a basic HTML page and used that stylesheet and it worked out fine.  Why won't it work in SharePoint 2013?  Is there a clash with the default styles and can I disable the default styles?
    Thanks,
    Mike

    Hi,
    To use an External Stylesheet, you can reference it as what the links below suggests:
    http://techtrainingnotes.blogspot.jp/2012/05/adding-javascript-and-css-to-sharepoint.html
    https://www.nothingbutsharepoint.com/sites/eusp/Pages/Understanding-SharePoint-CSSLink-and-how-to-add-your-custom-CSS-in-SharePoint-2010.aspx
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

Maybe you are looking for

  • Moving Music from an iPod to my new iPhone

    I just purchased a new iPhone. Is there a way to move all the music from my old iPod to my new iPhone? Thanks in Advance. Troy.

  • Problem with File.createTempFile

    I did File temp = File.createTempFile("cpyStats", ".xls"); //                Delete temp file when program exits.                temp.deleteOnExit(); System.out.println(temp.getName());But the result is : cpyStats30440.xls Why do it always have some

  • Is it possible to assign same partner role more than once in PO?

    I am trying to assign same partner role (GS) more than once in a PO, as we have several different suppliers for the different items in the PO. A different option would be tab "confirmations" in PO but I need to be able to check validity of suppliers.

  • JavaIDL sun site simple example dont work

    Hello all i didn't saw any javaIDL forum so i will port it here , im trying to run the javaIDL tutorial http://java.sun.com/j2se/1.3/docs/guide/idl/tutorial/GSserver.html but im geting error when i trying to compile the code on the HelloServer.java i

  • Installing sun cluster on system based on SUNWcrnet

    Hi, I'm planning to testdrive the sun cluster software. All our systems do run the SUNWcrnet install cluster plus additionally required packages. I read that for sun cluster 3.1 at least SUNWCuser is necessary. Did anybody succeed in running sun clus