Fonts Not working in some programs

Hi
I use Adobe's InDesign quite a bit to create flyers. Yet my "house" font (FLF's Dorovar) will not print correctly in I.D to a Lexmark laser printer but it will print correctly on an inkjet. It prints fine in TextEdit on the laser printer. I have redownloaded the latest Adobe ID driver but no improvement. Any ideas?
Thanks
Enio

Hmm. The same font prints fine when...
1) You print to the inkjet out of InDesign.
2) You print to the Lexmark out of TextEdit.
...but not out of InDesign to the Lexmark.
It kind of sounds like a PostScript error. Either being caused by InDesign's handling of the font sending the data to the printer, or the printer is misinterpreting the data.
Is this a PostScript or TrueType font? Is either the laser printer or the inkjet PostScript capable? If so, is the PostScript RIP handled by hardware in the printer, or via software before sending?

Similar Messages

Copperplate Gothic font not working in some versions of Firefox

Copperplate Gothic font not properly working in some versions of Firefox. whereas perfectly working in remaining browsers. when I follow the instruction and Restart Firefox in Safe Mode, the problem does not happen in Safe Mode. According to instruction for Troubleshoot and diagnose Firefox problems, If problem not occur in Safe Mode, it is most likely because of hardware acceleration. when I Turn off hardware acceleration, the problem is no longer happening, then hardware acceleration is likely the cause of this issue. How i can fix this issue for Firefox on deployed site without changing font.

Does Firefox use another font instead?
If this is the case then which font?
You can use this extension to see which fonts are used for selected text.
*fontinfo: https://addons.mozilla.org/firefox/addon/fontinfo/

Dictation not working in some program windows

I have an electronic medical record (EMR) that I use in my office on my Macs. I am running Mavericks. At first dictation worked inside a note inside the program, and then it stopped. It still works outside this specific program. I suspect that the EMR Vendor suspended the access that dictation had to its windows so that they could sell their own dictation program. Can they in-fact do that? Is there a way around it?

Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/19260713#19260713%2319260713%2319260713

Sound working on some programs but not others (Pavilion dv6 Notebook PC)

The sound is working for some programs (iTunes) on my laptop, but will not work with Chrome, Internet Explorer or BBC iPlayer Downloads.
I'm at a loss to explain why. When I open up the Sound settings on the laptop, I can see that iTunes output plays on the 'Speakers and Dual Headphones' device, which is what I believe all my sound would usually come out from. I can hear it as usual.
However, when I play audio in Chrome, no sound comes out, but it appears the device 'SPDIF (Digital Out via HP Dock)' is now playing the sound instead. The sound bar for this moves up and down while something is playing, but I cannot hear anything at all.
It is as if my internet programs have been configured to have sound output through a device that does not actually exist. I tried fiddling around with Sound settings and 'Disabled' the SPDIF device, but nothing has actually changed. I would like to hook my internet audio back up to the 'Speakers and Dual Headphones' option but cannot work out how to.
Sorry if this is not very well-explained, but I have never dealt with this problem before.
Thank you so much if you're able to help - this is very frustrating!
Edit: I also recently used a new HDMI cable to hook my laptop up to our TV and think this could be something to do with it

Hi PacificBay,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the problems with the sound. Try setting your speakers as the default audio device. What operating system are you using? What is the product number for your Pavilion?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Audio doesn't work on some programs after boot (sometimes)

Check new message dated 30.06.2014
Hi,
I'm having a weird problem. After booting my computer, the audio sometimes works perfectly, sometimes not at all, and sometimes it works on some programs but not on others. For example last night audio played without problem on Chromium, VLC and Amarok. Today after boot it played on VLC, but not Amarok (didn't realise to check Chromium), and now after reboot it plays on VLC and Amarok but not on Chromium.
Chromium means YouTube (HTML5) and others (Flash).
My DE is KDE (was xfce4 with mostly same audio trouble). Soundcard is USB DAC (SMSL Fort) and on KDE's Audio and Video setting I have it listed at the top and the "test" button works (i.e. it plays a sound).
$ lsmod | grep '^snd'
snd_hda_codec_realtek 54547 1
snd_usb_audio 131640 2
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 40208 1
snd_usbmidi_lib 21428 1 snd_usb_audio
snd_rawmidi 20278 1 snd_usbmidi_lib
snd_seq_device 5244 1 snd_rawmidi
snd_hda_intel 22270 4
snd_hda_controller 22911 1 snd_hda_intel
snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
snd_pcm 83207 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 19294 1 snd_pcm
snd 60780 24 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
$ ls -l /dev/snd/
total 0
drwxr-xr-x 2 root root 60 Jun 20 15:48 by-id
drwxr-xr-x 2 root root 100 Jun 20 15:48 by-path
crw-rw----+ 1 root audio 116, 2 Jun 20 15:48 controlC0
crw-rw----+ 1 root audio 116, 8 Jun 20 15:48 controlC1
crw-rw----+ 1 root audio 116, 6 Jun 20 15:48 controlC2
crw-rw----+ 1 root audio 116, 5 Jun 20 15:48 hwC0D0
crw-rw----+ 1 root audio 116, 13 Jun 20 15:48 hwC1D0
crw-rw----+ 1 root audio 116, 3 Jun 20 15:48 pcmC0D3p
crw-rw----+ 1 root audio 116, 4 Jun 20 15:48 pcmC0D7p
crw-rw----+ 1 root audio 116, 10 Jun 20 15:48 pcmC1D0c
crw-rw----+ 1 root audio 116, 9 Jun 20 15:48 pcmC1D0p
crw-rw----+ 1 root audio 116, 11 Jun 20 15:48 pcmC1D1p
crw-rw----+ 1 root audio 116, 12 Jun 20 15:48 pcmC1D2c
crw-rw----+ 1 root audio 116, 7 Jun 20 15:57 pcmC2D0p
crw-rw----+ 1 root audio 116, 1 Jun 20 15:48 seq
crw-rw----+ 1 root audio 116, 33 Jun 20 15:48 timer
Many thanks.
Last edited by NGCjmo (2014-06-30 16:55:39)

What is the ouput of cat /proc/asound/cards, aplay -l?
For an example:
[firekage@arch_desktop ~]$ cat /proc/asound/cards
0 [XFi ]: SB-XFi - Creative X-Fi
Creative X-Fi 20K1 SB073x
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf6080000 irq 17
2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
USB Device 0x46d:0x825 at usb-0000:00:14.0-7, high speed
[firekage@arch_desktop ~]$
[firekage@arch_desktop ~] aplay -l
card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
[firekage@arch_desktop ~]$
I think that you have multiple sound devices and their boot order changes after each reboot.
Last edited by firekage (2014-06-20 13:13:05)

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

HT1414 I have intelos and my Iphone does not work in some areas or in my house. I have had Apple replace it 2 times with the same problem. My android worked fine in all places....what's wrong with this? It's killing my business!! Any ideas to fix it??

Please help me understand why my I phone 4s is not working in some places and my HOME!! I have been to Apple 3 times and Intelos 5 times and no one knows whats wrong and they are telling me that no one else is having this problem. It's hurting my business because I can't get calls at home. I paid a lot of money for this and may have to pay to get out of it. I thought Apple was a good company but am changing my mind quick.

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

Group Policy not work in some client machine.

Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.

Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same. Any ideas

I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same. Any ideas

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

Intelligent barcode font not working in Data Merge?

Intelligent barcode font not working in Data Merge?
When using Data Merge I only get a pink box where the code is supposed to go. If I cut and paste the same info into the spot the bar works fine. Anybody ever have this problem?

It looks like you're working with InDesign, correct? I would try posting your question over in the general InDesign forum: http://forums.adobe.com/community/indesign The folks over there will be able to provide you with more specialized expert help

In Robohelp 9, search does not work for some Vietnamese characters.

In Robohelp 9, search does not work for some Vietnamese characters.

I don't think there is anything we can do on a user to user forum. I suggest you report this to Adobe as a bug. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
If you need a more immediate response, you would need to take that up with Adobe support.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator)

Mac OS X 10.6.7
CS 5.5
When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator). This happens only when Firefox is open and when I close it the zoom functions work fine again without having to restart the applications.
This is intermittent but happens quite frequently each day if Firefox is active.

MDN doesn't mention -chrome being used for ordinary web pages: https://developer.mozilla.org/docs/Mozilla/Command_Line_Options#Chrome
When I use
firefox.exe -chrome about:permissions
I get a usable window, but zoom doesn't work as you noted.
How about using an intermediate page and window.open() for the target page? You can (mostly) restrict the chrome of windows opened that way, but it will leave behind the intermediate window...
https://developer.mozilla.org/docs/Web/API/Window.open

MacBook Air osx 10.7.5 ... volume not working on some internet videos or songs,

MacBook Air osx 10.7.5 ... volume not working on some internet videos or songs, on items used before (3wks ago) it has always worked

Is there a volume icon at the bottom of the video window when you move the mouse pointer over to bottom
of the window?

I have compaq CQ61 309TUI have wrongly changed the DVD Region....Its not working CAn Some one this

I have compaq CQ61 309TUI have wrongly changed the DVD Region....Its not working CAn Some one this

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Fonts Not working in some programs

Similar Messages

Maybe you are looking for