Fonts on CS6 are too small

Any updates to solve the problem?

Attach an external Display that displays more pixels at a lower resolution like a dell ultrasharp 32"  UP3214Q displaye 3840px by 2160px a 16:9 aspect ratio at only 140DPI text should be quite readable.  Before there were displays with high resolution DPI most displays had a resolution around 96DPI so the font used in applications UI were designed for 96DPI displays they should be readable at 140dpi.  I have used 15" 1600x1200 displays for years their 133DPI resolution display fonts slightly smaller and much sharper then 96DPI displays. Your MPB LCD has a resolution of 220DPI at that resolution fonts designed for 96DPI displaye will be less the 1/5 the size they display at 96DPI. At 140DPI they will be 1/2 the size as displayed at 96dpi. 2.5 times the size of text on your 240dpi display. Your MBP supports 3840x2160 via HDMI at 30HZ.
These days Applications and OS need to be updated to support high dpi resolution displays. This will not happen over night.  IBM introduced the 204DPI T221 22.2" 16"10 aspect ratio display that displayed 3840x2400 pixels 9,2MP in 2001 and UI fonts were displayed too small..  Its now 2014 some 13 years later.... IBM T220/T221 LCD monitors - Wikipedia, the free encyclopedia

Similar Messages

  • The icons on cs6 are too small

    Icons on cs6 are too small

    If your using a high resolution PC tablet or Laptop you can use a low resolution external display.  CS6 UI was designed for displays with a 96 DPI resolution.

  • Font and icons are too small in workspace

    I've used photoshop elements 10 ad it's worked fine on my other computers. I just purchased a new computer, same size monitor and I can barely read the font or text on it. I have 20/20 vision but the workspace is so small on this computer. I've tried changing the resolution on my screens and it's not changing photoshops screen at all. I'm not sure why it is a great size on my past computers and this updated computer it's not showing properly ? Any suggestions I can not use the program any longer with the changed sizing.
    Thanks    

    make sure that you are using the minimum resolution as 1024x768.
    Also, check the DPI should be 100% (refer the below link so adjust DPI)
    http://windows.microsoft.com/en-in/windows7/make-the-text-on-your-screen-larger-or-smaller
    -Harshit yadav

  • How do I change the settings when my fonts on printer are too small?

    Epson XP410 All in one printer
    Windows 8 system

    Just to let you know this is an HP Printer forum, not Epson. Please call the good folks at Epson for assistance. With that said, your font size is controlled by your printing software application and not the printer itself.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • After changing from IE to Firerfox mozilla, the fonts on email are too small and I can't change them

    After changing from Internet Explorer to Firefox Mozilla, I noticed the font size, like this one, was the standard font in everything. I want a larger font in '''everything''' I read and type, including emails.

    My two suggestions would be find an epub editor, (never seen one sure one exists)
    or use Zoom on your device. It's not the best solution, but it shold at least make it readable.
    You can enable Zoom under Settings.

  • To everyone who thinks the fonts are too small on ...

    To everyone who thinks the fonts are too small on the N9 i suggest you contact Nokia about this issue. I know i am!

    please see my post here: /t5/Maemo-and-MeeGo-Devices/N9-Font-too-small/m-p/1338481#M32968

  • The fonts are too small on my imac desktop and web browsers.  Where can I increase the size?

    The fonts are too small on my imac desktop and web browsers.  Where can I increase the size?

    babowa wrote:
    The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
    It's a b*&^ch getting old .  I still use the screen zoom instead of decreasing resolution, but maybe soon ...

  • Fonts on websites with firefox are too small

    Hi all
    I have a problem with font size on firefox. They are too small, take a look:
    http://img182.imageshack.us/img182/3873 … ot1oo7.jpg
    I run Arch with KDE 3.5.4 + gtk-qt-engine + firefox 1.5.0.7

    <match>
    <test><string>tahoma</string></test>
    <edit><string>Bitstream Vera Sans</string></edit>
    </match>
    <match>
    <test><string>verdana</string></test>
    <edit><string>Bitstream Vera Sans</string></edit>
    </match>
    <match>
    <test><string>arial</string></test>
    <edit><string>DejaVu Sans</string></edit>
    </match>
    <match>
    <test><string>time new roman</string></test>
    <edit><string>Dejavu Sans Mono</string></edit>
    </match>
    <match>
    <test><string>helvetica</string></test>
    <edit><string>DejaVu Sans</string></edit>
    </match>
    Those are the ones I got, I even tried to replace helvetica. It's not working, though. I see helvetica on most sites now.

  • The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier.  They are OK in Photoshop CC.  I have been unable to find anyplace to adjust the font size.  I have Windows 7 Pro.  Looking at the Photoshop version history, it lo

    The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier.  They are OK in Photoshop CC.  I have been unable to find anyplace to adjust the font size.  I have Windows 7 Pro.  Looking at the Photoshop version history, it looks like this problem comes and goes as Photoshop is updated.  It should be an easy fix.

    Try the Photoshop CC 2014 Preference experimental section 2X UI option

  • I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me

    I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me ..

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • The fonts on my homepage are too small to read; how do I fix it

    I just installed firefox and selected my theme. The fonts on the homepage are too small to read. How do I fix this?
    == This happened ==
    Every time Firefox opened
    == I installed Firefox

    Reset the zoom for that page.
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • Photoshop CC icons and text are too small: how to adjust so they're readable? [was: Joanne]

    I have just downloaded Creative Cloud on a new computer.  The new photoshop icons and text are too small for me to see or work with.  I cannot seem to adjust this so its "useable"

    Hey Bob,
    Ive put feature requests for this in before and I know many others have as well. Is there any way to see if Adobe is actually working on this? I dont really consider this a feature request, it should be standard with the software. A feature request would be something like creative cloud libraries, not the ability to make font sizes and icons bigger.

  • I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

    I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)   If I move the application window to another screen it adjusts it correctly  – leaving all the pallettes, menus and tools correctly sized as they are on the retina display   Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?   There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.  MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

    I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
    If "open in low resolution" is unckecked the appearance is good but the very small size.
    See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

  • Error "roll area too small"! Can't find a way to resolve!Please hep.

    Hello everyone:
           i am getting the error "roll area too small" when I am looping through an internal table and calling the code below on change of some value.
    ===
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            authority              = space
            immediately            = space
            new_list_id            = c_x
            no_dialog              = c_x
           user                   = sy-uname
          IMPORTING
            out_parameters         = params
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF sy-subrc NE 0.
          CLEAR : params.
        ENDIF.
    The printer destination has to be set up
        params-pdest = v_dest.
        params-prtxt = v_spool_text.
        params-paart = lc_paart.
        params-prtxt = v_spool_text.
        params-primm = 'X'.
        params-prrel = space.
        NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
        NEW-PAGE PRINT OFF.
    ======
    I posted this before and got some feedback and tried everything but it is not fixing the problem! I rewarded points to all the answers. I had basis increase roll area size, optimized code and did everything I can but I am still getting the same error "roll area too small". Same program works in 4.6C but in ECC6.0 I get this error! I have other programs that generates more than 10,000 pages in the spool but the program I am working on creates only 7700 pages! I  am not sure what else is changed in ECC6.0! Could someone please give me any ideas? rewards assured.
    thanks.
    Mithun

    Hello Mithun,
    Even i think increasing the roll area should have helped
    Are both the systems WIndows based  or is one unix based ?
    see this
    http://listserv.sap.com/pipermail/linux.general/2001-July/thread.html#670
    and search for "roll area too small" in the list of links
    it may help
    Also,
    in this solution, it says to use 'field groups'
    http://www.sapfans.com/sapfans/forum/r2all/messages/42.html
    Try these links as well - others with the same problem
    http://marc.info/?l=mysap-linux-general&w=4&r=1&s=%22rollareatoo+small%22&q=b
    Message was edited by:
            Kris Donald

  • I can't delete partition in disk utility, it keeps telling me that "the changes are too small"

    I previously split my disk into two different disks, however I want to combine them together again, yet i was unable to delete the second partition. I can't delete partition in disk utility, it keeps telling me that "the changes are too small"
    Plz help!!!!!!

    Make at least two complete backups of all your data. Boot from another drive and partition this one as desired. Restore the data.

Maybe you are looking for