Fonts on logon pad 710 cannot read

Hi,
I have installed GUI 710 and found that fonts cannot be read.  How can i can it to english?  My pc installed chinese fonts.
Thanks
Wilson

Hi,
You can change the language of your logon pad...
Just click on top left corner ICON ==> Select "Options" ==> Select Language = "EN."
Click on "OK" and exit.
Your language will be change...
Regards.
Rajesh Narkhede

Similar Messages

  • JUST DOWNLOADED 9.0., NOW FONT IS SO SMALL I CANNOT READ IT

    I HAVE TRIED CHANGING THE FONT SIZE, BUT IT JUMPS BACK AND MESSES UP THE REST OF THE COMPUTER. IT ONLY SEEMS TO BE A PROBLEM IN GMAIL

    PROBLEM SOLVED, I READ SOME OF THE OTHER PROBLEMS AND TRIED CONTROL + AND IT WORKED GREAT. THANKS FOR THE HELP

  • Font has become so small cannot read e-mail.

    font size is unreadable-how do i make it back to default setting

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • SAPScript Korean font convert to PDF , font cannot read

    Hello everyone
    i use SAPscript original language EN.
    in sapscript i use korean font KPBATANG to show detail of Purchase order,
    some korean text come from SAP table , some korean text i hardcode in sapscript.
    but when i convert SAPscript to PDF for sending file vie email.
    all korean font cannot read, but english font is OK.
    i attach picture as below.
    http://www.flickr.com/photos/53547794@N06/4966797778/
    you will see that korean font in ( ) cannot read
    please help.
    Edited by: dittaporn nanasilp on Sep 7, 2010 6:43 AM

    Hi,
    In addition to Korean font like KPBATANG, the language key of the used form(sapscript or smartform) must be KO. Also the PDF must be created by a Korean device type like e.g. KPSAPWIN.
    If you have a Unicode system, then the Unicode cascading fonts device type SWINCF or PDFUC can be used to create the PDF. In this case the language of the form is not so important.
    Regards,
    Aidan

  • Cannot Read Font Metrics Issue on Save As PDF

    Hi All
    On saving a document as PDF, the FrameMaker Console displays the message:
    The font file may be damaged.
    maker: Cannot read font metrics from font file named Tahoma-Bold.
    The PDF is created but it contains squares in place of letters.
    This only happens for one document within my book.
    I have removed and reinstalled Tahoma, with no effect.
    What has happened and what do I need to do to enable save to PDF for this document.
    I am using FrameMaker 9.0 installed as part of Technical Suite 2 and running on Windows 7 professional.
    Thank you for your help.
    Claire

    I'm on FrameMaker 10, installed about a month ago, and suddenly, yesterday, I started getting this exact error on PDFing a book I'd previously had no trouble with. Nothing apparently changed in my setup between everything working fine and getting these "the font file may be damaged" console errors. Interestingly, it's on exactly the same font as reported by Claire and MichaelH; Tahoma and Tahoma-Bold are listed as the troublesome fonts. These are not the commonplace Frame console "missing font" errors -- they totally mess up the PDF.
    Both these fonts work perfectly in Word. We tried reinstalling, with no change, and I was about to call Adobe support, as recommended by our IT desk, but checked this forum first.  A million thanks, Michael Müller-Hillebrand, for posting the exact solution to the problem. I cleared the Convert CMYK to RGB box and everything is fine now. Thank you SO much.
    Adobe, could you please fix this? First message on this thread was almost a year ago and my copy of Frame was purchased last month. The issue should have been fixed by now. This has cost me about three hours, plus the time of the IT desk reinstalling FrameMaker.

  • Illustrator and InDesign CC cannot read the fonts in Suitcase

    The Illustrator and InDesign CC versions cannot read my fonts in Suitcase Fushion 3. Is there any solutions?
    Thank You!!!!

    Upgrade to Fusion 5. Three is not compatible with the CC apps.

  • Trying to log in and message reads: User Profile Service failed the logon. Profile Cannot be loaded

    When I try to log on by clicking my user icon, I'm getting a message that reads:  The User Profile Service service faied the logon.  User Profile cannot be loaded.

    Hi,
    Check the guide on the link below to see if any of the options ( particularly using windows System Restore ) helps.
    http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loade...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sapgui 710/Vista problem (multiple logon pads open)

    Running SAPgui 710 (pl3) on a Vista workstation. 
    When I open more than 1 SAP logon pad, then select a system from 1 pad, then try to select a system to logon to from the 2nd logon pad, I get the error:
    (X) Internal Error: Internal Server Error, no more memory
    component DPTM
    This does not happen on an XP workstation.
    Any suggestions?

    We reinstalled sapgui, same problem.  We installed sapgui on 2 other vista machines - same problem.  Is anybody else running Sapgui 710 patch 3 on a Vista machine, with this problem?
    1) open a sap logon pad
    2) open a 2nd logon pad
    3) from the 1st logon pad select a system, get to the logon prompt, minimize the window
    4) from the 2nd logon pad, try to select a system
    this is where we get the "internal server error"
    Anybody else seen this?  Do you have a solution?
    Thanks,
    Scott

  • Fonts look blurry - cannot read - Mac OSX

    New computer - iMac OSX - cannot read text - fonts blurry or entirely illegible.

    Same here, now that you and my wife mentioned it. The real problem is that we're supposed to thank Apple for that blurry text:
    http://www.joelonsoftware.com/items/2007/06/12.html
    Now that I understand why it is blurry, and that there is no hope of finding a "fix", I feel much better...sure do.

  • I have Calibri Bold in my fonts folder; however I cannot read an online bill using that font. Why?

    I have Calibri Bold in my fonts folder; however I cannot read an online bill using that font. Why?  When I click view my bill it tells me that it cannot find Calibri Bold.  What is going on?  How can I fix this?

    There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

  • Logon balancing error:cannot connect to message server (rc=9)

    Hi Gurus,
    I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
    I am now able to see the servers in the logon pad but not able to login .
    When i try clicking the logon i am getting the below error message "
    "Logon balancing error:cannot connect to message server (rc=9)"
    Then further expanding the message i am getting the below message
    " Error: Server '?' unknown
    Tue Mar 02 11:51:05 2010
    Release 710
    Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
    Can you please help me out in accessing the servers.
    Regards
    Vikram

    Check OSS Note : 882741
    Summary
    Symptom
    Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with  error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
    The detailed error information is as follows:
        Error: service 'sap...' unknown
        Component NI (network interface), ...
        rc = -3, module ninti.c, line 463
        Detail NiPGetServByName: service 'sap...' not found
        System Call getservbyname
    Other terms
    service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
    MSN Messenger 7.5,Connection Troubleshooter
    Reason and Prerequisites
    The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
    was changed from REG_EXPAND_SZ to REG_SZ.
    The following programs are currently known to cause this registry change:
    Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
    Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
    This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
          %SystemRoot%\system32\drivers\etc
    is not translated to
       c:\windows\system32\drivers\etc
    and the services database is not found by the API function getservbyname().
    If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
    Solution
    Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
    Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
    If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
    If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
    Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
    What software has been installed recently ? (client software, Firewall)
    Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
    Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
    Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
    You can download the Networking MPS Reporting Tool at:
    http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
    You can find a short description about the features of the tool at:
    http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
    The Setup Perf MPS Reporting Tool is located at:
    http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
    Run this report too on identically configured workstations, which are not affected.
    If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the  following steps to help us to identify the reason for this problem:
    Switch the datatype back to REG_EXPAND_SZ
    Download Regmon from http://www.sysinternals.com on the affected machines
    Enable auditing on the affected clients
    Modify the settings of the eventlog so that no important entry is deleted!
    Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
    Right-click on "Parameters" and choos "Permissions" and click "Advanced".
    Choose "Auditing" and "Add".
    Add "Everyone" and select "this key only" under "Apply onto".
    Check the boxes "Set Value" and "Delete" and click "OK".
    Apply these settings
    Start Regmon and apply the correct filter settings:
    Press the "magnifying glass" button  to stop the monitoring.
    Press the rubber button to delete  all logged entries.
    Go to "Options Filter/Highlight".
    Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
    Start Regmon by pressing the magnifying glass button
    Verify that logging starts when you double-click the TCPIP Key in regedit!
    If the datatype will be changed again,  provide us the output of the monitoring tools.
    Solution provided by Microsoft
    This issue is said to be fixed as of build 7.5.0311 of MSN messenger.

  • How can i find SAP Gui logon pad version

    how can i find SAP Gui logon pad version ?

    Hi,
    That's easy. At the top of the logon, you see a title bar with a general version indication. At the most left of it, you'll see an icon. Click on that and choose about SAP logon and you'll get detailed info.
    Eddy
    PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

  • ? to Customize Sap GUI Logon Pad

    Hello all,
    How can i customize Sapgui logon pad with own Logo instead of Default Logo.
    Thanks in advanace,
    Rahul

    Hi Markus  When we click on Logon Pad SapGUI 710
    On the System Tab right hand side we have Viriable logon
    below to that We had a Logo Indicating Orange & Blue arrow
    How can i change to my own Logo.
    Cheers,
    Rahul

  • Cannot read any form posted data

    I create a web server :
    import java.io.BufferedReader;
    import java.io.InputStream;
    import java.io.InputStreamReader;
    import java.net.ServerSocket;
    import java.net.Socket;
    public class TestWeb extends Thread {
        Socket soc;
        ServerSocket server;
        InputStream is;
        BufferedReader br;
        public void run() {
            try {
                while (true) {
                    soc = server.accept();
                    if (soc!=null)
                    is = soc.getInputStream();
                    br = new BufferedReader(new InputStreamReader(is));
                    String line = "";
                    while (line!=null) {
                        line = br.readLine();
                        if (line==null) continue;
                        System.out.println(line);
            } catch (Exception ex) {
                System.out.println(ex.toString());
        public TestWeb() {
            try {
                server = new ServerSocket(80);
            } catch (Exception ex) {
                System.out.println(ex.toString());
        public static void main(String[] arg) {
            try {
                new TestWeb().start();
                System.in.read();
            } catch (Exception ex) {
                System.out.println(ex.toString());
    }It can read the header when someone connect to this server
    However, it cannot read any form posted data.
    Does anybody have any idea?
    The following is the html source that i use in a browser to connect to the test server
    <HTML><BODY>
      <CENTER><H1><FONT COLOR=BLUE><B>Test</B></FONT></H1></CENTER>
      <HR>
      <FORM METHOD="POST" ACTION="http://127.0.0.1">
        <INPUT TYPE=TEXT VALUE="abcde">
        <SELECT>
          <OPTION VALUE="1">1</OPTION>
          <OPTION VALUE="2">2</OPTION>
        </SELECT>
        <INPUT TYPE=SUBMIT>
      </FORM>
    </BODY></HTML>

    I would expect the form data posted to be received. For example, the user chooses the option value and the text input value.
    This test is hang just after receiving the header information and no parameters collected.

Maybe you are looking for