Fonts preview problem since I updated the OS Yosemite 10.10.2
Hello everyone, I have Illustrator CS5 on a Mac and I just updated the OS to Yosemite 10.10.2 and since then I am experiencing problems to see the fonts preview on the Character panel. Instead of seeing the preview, the list is in blank, but if I put the cursor on the list I can see the preview but I want to fix this and I want to see the preview as always. I will appreciate your comments. Thanks!
Valeta,
I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/
It may also depend on the monitor, as it appears from post #29 by Loncar in the same thread.
Obviously, this also influences some other things so there may be a downside to it, Obviously, the reduced transparency influences the appearance of other things, but so far no one has complained about drawbacks.
Similar Messages
-
My Mac OS X 10.9.2 is unable to read any disc since I updated the operating system to Marverick a few months back. How can i resolve this problem because I need to retrieve very important information on my discs. Help! Thank you... paul
Paul,
Your problem has nothign to do with your installation of Mavericks. I assume you are referring to your SuperDrive not being able to read any discs, is that correct? If so then please advise what troubleshooting steps you have taken? -
I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced. Any suggestions would be fantastic
test if it charges with an ac charger
test if it's detected by another computer
if it's no to both then likely the connector is broken
if it's yes to both thne it's likely your computers itunes install which is the problem -
I have been having problems since i installed the quicktime update yesterday. can i revert to the version before the update? how would i do that?
Hi, I don't think I've done that for a few years, but what exact version was it you installed?
Is this an Intel iMac, or a PPC iMac?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
Pehaps more important, what exact problems are you having Kim? -
My iphone 5s Bluetooth no longer works in my 2014 honda accord, ever since i updated the software two months ago. Can anyone help?
Problems with Bluetooth connections are generally traced back to the vehicle. If you search here in the forum you will find a number of posts with issues connecting with Honda vehicles. Try removing the phone from the vehicle's list of Bluetooth devices. Then try removing the vehicle from the iPhone's list of Bluetooth devices. Then place both devices back in discovery/pairing mode and try to connect them. You may need to take the device to the dealer to check for software updates.
Next, I understand it used to connect, however software updates for the iPhone will load the latest Bluetooth stack into the phone and vehicles do not always get updated as often. You can also check this support document for frequently asked questions and the other for additional troubleshooting instructions. Wireless input devices: Bluetooth frequently asked questions iOS: Third-party Bluetooth accessories -
Mail is not functioning right, as well as iWorks. And everything started to break down since I updated the OS please help!
To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops. -
Farm Heroes will not work on my iPad Since I updated the game
Farm Heroes will not work on my iPad since I update the game.I could play just fine before I updated it on May 1st. I was up to level 120. I have tried everything,restarting iPad, uninstalling and reinstalling Farm Heroes,uninstalling all other games, and even did a reset on my iPad. The game will not stay on. I can sign in to Facebook but if I click Play it will shut off before or right after my first move.And always starts on level 1.I wish I could undo the uplate.....
Did you ever get an answer? I see no resolution to this problem, that I also have.
-
Why the secure lock does not appear on webpages since I updated the latest Firefox download last week?
Padlock is no longer part of Firefox. Familiarize yourself with the Site Identity Button at the left end of the Location Bar:
*https://support.mozilla.com/en-US/kb/Site+Identity+Button
*http://www.dria.org/wordpress/archives/2008/05/06/635/
You can install this add-on if you wish: *https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not pertaining to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox] -
Ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6
ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6?????
Have you went to Bose's support site?
Sometimes an iOS update breaks compatibility
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the Bose unit
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem then there is nothing you can do except see it Base has firmware update. -
Since I updated the latest iPhoto I haven't been able to export my photos. It crashes every time. Please advise what I can do to fix this.
I no longer have this problem. Thanks to Terence Devlin. Thank you for the information you provided on other posts.
-
I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car. my car is a 2013 mercedes E350. Is there a way to go back to an older version of the itunes software?
If it's an older iPod, its software is not being updated by Apple. So, I don't see how updating iTunes would make the iPod not work with the car's audio system, since iTunes just updates the song files (not how the iPod operates).
Does the iPod work by itself (play songs), when disconnected from the computer and iTunes? -
I have the iPhone4 and ever since I updated the phone, I can no longer connect it to my iHome (iD8)
I have the iPhone4 and ever since I updated the phone, I can no longer connect it to my iHome (iD8)
Yes, they told me I should contact apple, but apple hasn't helped me either! The iHome has worked perfectly all along and it still is working it has power just will not connect anymore to play my music.
-
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else! -
I have a problem when you update the iPhone
I have a problem when you update the iPhone does not complete the update and the bar that appears in the top of iTunes (restoring iphone software)
-
My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?
I have deleted the iCloud account under my name on their iPads and replaced with their ones. Apple support said yesterday I needed to click the small 'I' by each name as it came up in the TO box and remove it. After doing rid for each contact under each letter of the alphabet it should remove them from latest contacts. Having done this, although I could not remove groups I had sent, I am not convinced they will not return once I have written a few texts, any ideas?
Maybe you are looking for
-
HT1420 old computer no longer operable, how do I get the contents of m iPod onto new compter
I have an older iPod, and the computer I had it associated with is no longer operable at all. How do I get the music on my iPod onto my new computer?
-
How to install Elements 12 on MacBook Air with no DVD drive? [was:URGANT HELP NEEDED!]
I have a MacBook Air, with no CD drive. I just purchased 'Adobe Photoshop Elements 12 & Adobe Photoshop Elements 12 Premiere', from the 'Best Buy' store. I asked for help before I purchased the product, to make sure I did not need a CD drive to downl
-
Thumbnail view of tabs in JTabbedPane
Hi all, I am doing a desktop app . In my app i am using JTabbedPane . In order to view the contents of all tabs in one shot,i need to bring the JPanel in each tab into a single frame,that contains a scrollbar.i.e,something like a thumbnail view of al
-
Hi, I am using Oracle 10g database express edition in windows vista business. While i am trying to strat the database it shows error as "system error 5 has occured" and whenever i am trying to connect the databse from SQL * PLUS it thrown error . err
-
Dear All, we defined one section code for the cocd. the same section code we are using for all the bussiness places ( 4 no's). when i post a document with one business place with the section code it accepted the posting and remittence challan, bank c