Fonts seem to be squashed up horizontally compared to old ver making it hard to read.
most fonts in the new firefox4 are cramped up horizontally making them really hard to read. some other fonts are really really poorly defined like they are really really thin. ive done comparisons with old firefox and other browsers on my laptop and theres definitely a big difference. it makes everything difficult to read and really stresses my eyes out.
Turn off hardware acceleration in options>advanced. It is a problem with Directwrite.
Similar Messages
-
Yesterday I used my iphone in the rain. I think some water must have got inside. Now the phone seems to be working OK but is not backlit so is incredibly hard to read. Is there anything I can do to reset or have I ruined the phone?
What you should have done is immediately turn the phone off, then put it in a ziploc bag of dried rice after you wiped all visible moisture off the phone. Leave it in the ziploc bag for 3 ~ 4 days, then turn it on & hope things work OK. It may be too late to try the dry rice trick now, but you can give it a shot if you like.
Apple does have an out of warranty replacement program, cost in the US is $199 for the 4S & $149 for other models. -
my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account
You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device. -
Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?
To configure the browser to use Acrobat or Adobe Reader to open PDF files:
1. Quit Internet Explorer(any other browser)
2. Start Acrobat or Adobe Reader.
3. Choose Edit > Preferences.
4. Select Internet in the list on the left.
5. Deselect(Uncheck) Display PDF in Browser, and click OK.
6. Restart Internet Explorer -
Hard To Read, Low Contrast Fonts
I have a problem: my system is showing me hard to read, low contrast fonts.
Here's a screenshot to prove it:
As you can see, the fonts are quite greyish instead of black. I tried the freetype2-lcd method as described in the wiki "Fonts" article. Still no success. I'm running XFCE on a 1680x1050 LCD display. Is there a way to fix this problem?Bender02 is right -- openoffice adjusts its own colors to match the colors of the gtk theme by default. The easy solution, for openoffice, is to go to Tools/Options/Appearance and set the background color to white and font color to black -- or whatever you like.
Last edited by fwojciec (2008-04-16 00:05:44) -
I can zoom-in, but that makes the fonts look bad and zooms in too much w/ just 1 level zooming. I will be going back to FF7 or FF6 if I can't get this fixed.
You know I think you are right about font sizes. I rebooted and this morning I can't tell the difference in my BMP screen dump images I took.
But I swear there is still something different visually in FF8 that is making it harder to look at then 6. Just not sure what that is... it sorta feels like I am looking at a CRT at 60 Hz refresh rate, but I am using an LCD monitor. I sure hope my eyes just didn't suddenly degrade last night :) -
Fonts are pixelated, fuzzy, hard to read and i do have cleartype ON
I have two monitors one acer x203h and one dell 17 inch monitor. The acer uses firefox and the dell uses chrome. Let me repeat my cleartype is ON. Firefox does render the page correctly most of the time and then just turns pixelated, fuzzy, hard to read, etc. Moving the page up and down sometimes helps sometimes not. I move firefox to the dell monitor and it pixelates less but still does. The chrome doesnt pixelate on either monitor but it does look a bit fuzzy. I do have IE but only use it for windows updates. The larger the font the less chance of the font pixelating.
Current font is Arial size 18. Proportional is San Serif with the rest of the choices being Arial. Allow pages to choose their own pages is checked off.The gfx.content.azure.enabled switch helped, I am using Firefox 19.0.2
I hope that changing gfx.content.azure.enabled doesn't create problems elsewhere. -
When I display the view-formula command , the information in the cell displays vertically and it is very hard to read. I want it to go back to the horizontal display I have had all along. Thanks
Allan:
Sorry, I forgot to mention that I am working with Excel for Mac. -
FIND OUT GAPS IN TAX TO COMPARE IN OLD AND NEW FOR BUDGETARY PURPOSE.
CAN I HAVE EXPALINARY DOC WITH EX BUSINESS PROCESS. SPECIFICALLY TO
FIND OUT GAPS IN TAX TO COMPARE IN OLD AND NEW FOR BUDGETARY PURPOSE.
THANKQ FOR IMMIDIATE RESPONSE
AnnieYou can use DBMS_LOB.COMPARE
-
Compare an old report with the new one
Hi,
i have saved a report in Answers. Then in my cube data are changed. In Answers i re-submit request and save new report with new data. Now I would compare two reports. But when i open old report, data shown are new. So I have two identical reports. How can I compare an old report with the new one? Thanks
Giancarlook then why don't you create two distinct reports but each with different filter value on the time column.
so that one report will give you old results. another report will give you new results. -
The text is often so small it is hard to read. It would be nice if as in the Blender animation program you can easily increase the size of fonts used in the program's user interface, through the "preferences" menu item.
Hi Ewporter,
Sorry, sounds like an excellent feature request, though. Make it here: http://adobe.ly/feature_request
Thanks,
Kevin -
My email is extracted off the comcast server. When I downloaded firefox 4, I email font dropped to a much small font. It's hard to read and I can't figure out how to increase the font size.
Everything was fine before firefox 4Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages -
How do I change the fonts on the home page? They recently shrank from 12 to very tiny..(6 pt?). I did nothing to change them, but after the event tried to change them using "preferences-Fonts"which had no effect. ATT seems to have made a change in their email. The fonts in the email are now huge (18 pt?). This could be an ATT/Yahoo problem with Mac, although Safari seems to be working o. k.
Jim, extensions are also add-ons. Add-ons include extensions, themes and plugins.
Whenever you have a problem with Firefox, whatever it is, you need to make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author. -
I can't seem to get individual elements when comparing 2 arrays using Compare-Object
My backup software keeps track of servers with issues using a 30 day rolling log, which it emails to me once a week in CSV format. What I want to do is create a master list of servers, then compare that master list against the new weekly lists to identify
servers that are not in the master list, and vice versa. That way I know what servers are new problem and which ones are pre-existing and which ones dropped off the master list. At the bottom is the entire code for the project. I know it's a bit much
but I want to provide all the information, hopefully making it easier for you to help me :)
Right now the part I am working on is in the Compare-NewAgainstMaster function, beginning on line 93. After putting one more (fake) server in the master file, the output I get looks like this
Total entries (arrMasterServers): 245
Total entries (arrNewServers): 244
Comparing new against master
There are 1 differences.
InputObject SideIndicator
@{Agent= Virtual Server in vCenterServer; Backupse... <=
What I am trying to get is just the name of the server, which should be $arrDifferent[0] or possibly $arrDifferent.Client. Once I have the name(s) of the servers that are different, then I can do stuff with that. So either I am not accessing the array
right, building the array right, or using Compare-Object correctly.
Thank you!
Sample opening lines from the report
" CommCells > myComCellServer (Reports) >"
" myComCellServer -"
" 30 day SLA"
CommCell Details
" Client"," Agent"," Instance"," Backupset"," Subclient"," Reason"," Last Job Id"," Last Job End"," Last Job Status"
" myServerA"," vCenterServer"," VMware"," defaultBackupSet"," default"," No Job within SLA Period"," 496223"," Nov 17, 2014"," Killed"
" myServerB"," Oracle Database"," myDataBase"," default"," default"," No Job within SLA Period"," 0"," N/A"," N/A"
Entire script
# things to add
# what date was server entered in list
# how many days has server been on list
# add temp.status = pre-existing, new, removed from list
# copy sla_master before making changes. Copy to archive folder, automate rolling 90 days?
## 20150114 Created script ##
#declare global variables
$global:arrNewServers = @()
$global:arrMasterServers = @()
$global:countNewServers = 1
function Get-NewServers
Param($path)
Write-Host "Since we're skipping the 1st 6 lines, create test to check for opening lines of report from CommVault."
write-host "If not original report, break out of script"
Write-Host ""
#skip 5 to include headers, 6 for no headers
(Get-Content -path $path | Select-Object -Skip 6) | Set-Content $path
$sourceNewServers = get-content -path $path
$global:countNewServers = 1
foreach ($line in $sourceNewServers)
#declare array to hold object temporarily
$temp = @{}
$tempLine = $line.Split(",")
#get and assign values
$temp.Client = $tempLine[0].Substring(2, $tempLine[0].Length-3)
$temp.Agent = $tempLine[1].Substring(2, $tempLine[1].Length-3)
$temp.Backupset = $tempLine[3].Substring(2, $tempLine[3].Length-3)
$temp.Reason = $tempLine[5].Substring(2, $tempLine[5].Length-3)
#write temp object to array
$global:arrNewServers += New-Object -TypeName psobject -Property $temp
#increment counter
$global:countNewServers ++
Write-Host ""
$exportYN = Read-Host "Do you want to export new servers to new master list?"
$exportYN = $exportYN.ToUpper()
if ($exportYN -eq "Y")
$exportPath = Read-Host "Enter full path to export to"
Write-Host "Exporting to $($exportPath)"
foreach ($server in $arrNewServers)
$newtext = $Server.Client + ", " + $Server.Agent + ", " + $Server.Backupset + ", " + $Server.Reason
Add-Content -Path $exportPath -Value $newtext
function Get-MasterServers
Param($path)
$sourceMaster = get-content -path $path
$global:countMasterServers = 1
foreach ($line in $sourceMaster)
#declare array to hold object temporarily
$temp = @{}
$tempLine = $line.Split(",")
#get and assign values
$temp.Client = $tempLine[0]
$temp.Agent = $tempLine[1]
$temp.Backupset = $tempLine[2]
$temp.Reason = $tempLine[3]
#write temp object to array
$global:arrMasterServers += New-Object -TypeName psobject -Property $temp
#increment counter
$global:countMasterServers ++
function Compare-NewAgainstMaster
Write-Host "Total entries (arrMasterServers): $($countMasterServers)"
Write-Host "Total entries (arrNewServers): $($countNewServers)"
Write-Host "Comparing new against master"
#Compare-Object $arrMasterServers $arrNewServers
$arrDifferent = @(Compare-Object $arrMasterServers $arrNewServers)
Write-Host "There are $($arrDifferent.Count) differences."
foreach ($item in $arrDifferent)
$item
## BEGIN CODE ##
cls
$getMasterServersYN = Read-Host "Do you want to get master servers?"
$getMasterServersYN = $getMasterServersYN.ToUpper()
if ($getMasterServersYN -eq "Y")
$filePathMaster = Read-Host "Enter full path and file name to master server list"
$temp = Test-Path $filePathMaster
if ($temp -eq $false)
Read-Host "File not found ($($filePathMaster)), press any key to exit script"
exit
Get-MasterServers -path $filePathMaster
$getNewServersYN = Read-Host "Do you want to get new servers?"
$getNewServersYN = $getNewServersYN.ToUpper()
if ($getNewServersYN -eq "Y")
$filePathNewServers = Read-Host "Enter full path and file name to new server list"
$temp = Test-Path $filePathNewServers
if ($temp -eq $false)
Read-Host "File not found ($($filePath)), press any key to exit script"
exit
Get-NewServers -path $filePathNewServers
#$global:arrNewServers | format-table client, agent, backupset, reason -AutoSize
#Write-Host ""
#Write-Host "Total entries (arrNewServers): $($countNewServers)"
#Write-Host ""
#$global:arrMasterServers | format-table client, agent, backupset, reason -AutoSize
#Write-Host ""
#Write-Host "Total entries (arrMasterServers): $($countMasterServers)"
#Write-Host ""
Compare-NewAgainstMasterdo not do this:
$arrDifferent = @(Compare-Object $arrMasterServers $arrNewServers)
Try this:
$arrDifferent = Compare-Object $arrMasterServers $arrNewServers -PassThru
¯\_(ツ)_/¯
This is what made the difference. I guess you don't have to declare arrDifferent as an array, it is automatically created as an array when Compare-Object runs and fills it with the results of the compare operation. I'll look at that "pass thru" option
in a little more detail. Thank you very much!
Yes - this is the way PowerShell works. You do not need to write so much code once you understand what PS can and is doing.
¯\_(ツ)_/¯ -
Font seems wrong using firefox built-in pdfjs
I am using firefox built-in pdfjs to view this pdf [1]. But it seems that the letter "t" is not shown correctly, which is shown in its bold style. and only the letter "t" but not any letter else goes wrong.
I'd like to insert a image here, but I don't know how to... TAT
[1]http://www.maths.tcd.ie/~dwilkins/LaTeXPrimer/GSWLaTeX.pdfThe latest stable and latest development versions of the built-in PDF viewer are available as an extension and these version can possibly perform better than the version shipped with the current Firefox release.
Latest development version of the PDF Viewer (pdfjs) extension:
*http://mozilla.github.io/pdf.js/extensions/firefox/pdf.js.xpi
Latest stable version of the PDF Viewer (pdfjs) extension:
*https://addons.mozilla.org/firefox/addon/pdfjs/
Maybe you are looking for
-
Multiple Electronic Signatures using Signature PAD
Hello Experts, We have a requirement where we need to capture the electronic signature on thee PDF form at different time. This means I fill the PDF form get the 1st electronic signature using signature PAD and then saved the form. I open the same fo
-
Serial Number Not Valid- new Windows 7pro workstation / fresh install of Creative Suite 5 Design Premium Win from download will not accept license key to install. This serial number is not valid for this product is the only response being returned. W
-
I'm working on creating an array that is basically a deck of cards, this is the problem. I'm getting this error: Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 4 void main() final int ARRAY_SIZE = 52; String[] deck = n
-
Adobe Reader X update - printer connection lost
After I updated to Adobe Reader X the other day I lost my printer connection online. Offline printing is fine. The printer does not appear in the print window as before. I thought it was the site I was trying to print from (Barclays) - after length
-
Price control "V" for Finished Material
Hi, In implementation project i have created ZFIN for finished material type.And given Price control "S". But as per client reqirement i have to change that " S" into "V". Is there any effect for those material which already have been valuated with p