Fonts used in some text layers not available...

I've been gettting the following message lately when opening Photoshop files at work: "Fonts used in some text layers are not available for activation. You will need to replace these fonts before the layers can be used for vector based output".
But when I check my text layers, there are no indications that any fonts are missing. I double click on every text layer to see what font is being used and double check Suitcase Fusion to make sure it is activated.
I'm using OSX Maverick 10.9.2. I'm using Suitcase Fusion 5 version 16.2.0. And I'm using Photoshop CC 14.2.1. It's more of an annoyance than anything, but would like to know why it keeps telling me fonts are not available when they are currently activated in Suitcase. Not sure if it's an Adobe issue or a Suitcase Fusion issue.
Anyone have any ideas on this?
Thanks!
Steve

DrStrik9, I opened up the file, clicked on each text layer and selected all to make sure there wasn't any character using a different font. There wasn't. I clicked on the font being used, tried changing it to a different font, then back to the font that was being used. I saved and closed the file, then reopened it, and that seemed to cure it for that file. Not an efficient way to go about it though.
I then tried another file that was giving me the same error, clicked on each text layer, changed the font to a different one, then back to what was being used, saved, closed and reopened it, and still got the same message. So it didn't work for that one. I then tried changing the font to a system font, Times Bold true type, saved, closed, reopened, and got the message again. So not sure what is going on. The fonts used in the first file were DIN and DINEngschrift postscript font, which were loaded and active in Font Fusion.
The 2nd file I tried was using Gotham Bold postscript font, which also was active in Font Fusion. I've run Font Doctor on the fonts and found no issues.
Even though I'm getting the error message when I'm opening these files, none of the text layers have that Exclamation point indicating there is an issue with the layer, so it would seem the text layers are fine. Just really annoying to get that error every time I open the file.
Another thing I tried is I created a new Photoshop file and just made some text layers using Gotham Bold. Saved, closed and reopened the file and did not get the message. So, I don't know why I would get it with one file and not another. Very confusing/frustrating. Any other ideas?
Thanks in advance,
Steve

Similar Messages

Turn off this nag screen?? "Some text layers contain fonts that are missing"

Hi all, I have recently been handed a web project from a mac user and everytime I open one of the pages I get the following message. "Some text layers contain fonts that are missing...etc" I have the same exact fonts but in the new open type format. Anyways apparently photoshop can't tell that. I would like to TURN OFF this nag screen. I am not even editing the text layer with the font.
Is there anyway to turn off this nag screen? I turned off glyph protection in the prefrences and restarted photoshop to no avail.

The missing fonts will be listed in grayed out color in the separate last section at the bottom of the font menu accessible from the text tool's property or the character panel
The layers with missing fonts will have the warning sign on the layer's icon in the layer's panel however the missing font/s will be displayed with the correct font. When you try to edit the text on such layer, Photoshop will show a message with the missing font/s and will say that it will be converted if you edit it. If you choose OK, and you have different fonts on the same layer, watch which fonts will change appearance.

Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly.

I am currently using Adobe Reader version 9.1.3. When I open certain files, it displays the following message, "Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly". Some fonts are actually missing and will not display when printing. I have tried updating adobe but the problem still persists. Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
Cheers
RK

RK7.10.09 wrote:
Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
Cheers
RK
BUT, does it say "embedded" or "embedded subset" next to the font name. If not, the font isn't included in the file and if you don't have it, it can't display or print it.
The file creator will need to embed the fonts properly although "some" fonts don't allow embedding. This could be one of them.

Error - Some objects are not available to your user profile...

Hello,
It is for BI 4.1 on Windows. We have a connection called CON1 pointing to DB1. It uses UNIV1 All reports were working fine and we were able to refresh it as well.
Now the CON1 is changed to point to DB2 and we are now getting following error - "Some objects are not available to your user profile. You cannot refresh this Query. See your Business Objects administrator to request rights".
If I create a new report using CON1 and the it works fine. Only the old reports are still causing issue on refresh. I tried with Admin account as well and same issue.
The CON1 is still CON1 and universe UNIV1 is still using CON1. Just the content was edited from DB1 to DB2 in CON1. If we create a new report then no issue.
Can anybody advice if something needs to compiled. Your help will be greatly appreciated.
Regards,
SS

Your old reports are still pointing to same connection. Remember the DSN has been pointed to use another Database. The records and entries will be different. In addition as the records or object mapping have changed for these reports. Hence this would be a very normal behaviour.
Create a new connection named CON2 or something like that to point DB1 as per your requirement. This way your original reports would work.

Some filters are not available

All my filters are not available but they used to be. ?

Probably in the wrong bit mode. Look at the tab above your canvas and see what number is in that tab. If it is anything other than 8 bit odds are some filters are not available.

Some DCs are not available locally - NWDS error while importing Track confg

Hi,
We have configured NWDI in our landscape.
As per the requirement of the developers, we have created a new product and software component (SC) in SLD, as they don't want to use any standard components.
The same has been synced with CMS using update CMS.
Now a new track is created (in landscape configurator) and the new SC has been added to the track. Track creation was successfull....given the sdm passwords for all 3 systems.
While saving a pop-up came saying that as the SC is New (i did not select the developed option), I need to Check-in and Import into DEV manually.....I GOT STUCK HERE.
What files needs to be checked-in in Transport studio?
Also when developers are trying to import the configuration in their respoective NWDS...they are getting "Some DCs are not available locally" error.
Also updated the patch of their NWDS but still no use.
Could any one help me out.
Regards,
Siv

Dear Satya,
As per your advise. I have maintianed the 3 dependencies for the SC.
However, the error "Some DCs are not available locally" is still recurring in NWDS.
Below is few line from log,
Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Used component not found: sap.com/tc/bi/bp/webDynpro
Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
Build log -
Development Component Build (2009-07-14 18:49:13)
Component name: RIB_SAPPS
Component vendor: sap.com
SC compartment: arg_PRIMAVERACUSTOMIZATION_1
Configuration: EPD_ARG_D
Location: EPD_ARG_D
Source code location: http://den2:50100/dtr/ws/ARG/arg_PRIMAVERACUSTOMIZATION/dev/inactive/DCs/sap.com/RIB_SAPPS/_comp/
DC root folder: C:\Documents and Settings\sa45572\.dtc\1\DCs\sap.com\RIB_SAPPS\_comp\
DC type: Web Dynpro
Host: CMR-2FL0565
DC Model check:
   All used DCs are available locally
   ERROR: Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
   Build failed with errors.
Jul 14, 2009 6:48:50 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.actions.dc.UsedDCFoundHandlerBase) [Thread[main,5,main]] ERROR: failed to resolve reference "sap.com/tc/wdp/metamodel/content" for DC "arg_PRIMAVERACUSTOMIZATION_1:sap.com/RIB_SAPPS":Cannot find compartment of used component: sap.com:tc/wdp/metamodel/content
Regards,
Siv

Some classes are not available

Hi
I am using JDeveloper 10.1.3
I have a question. Why some packages are not available for plain JAVA programs.
For example oracle.webservices.provider.. or
javax.servlet.httprequest....
And if you create for example a web service proxy these packages are available for imports.
Thanks
Drini

It all depends on the list of libraries/jars you specify under project properties->libraries.
When you create a Servlet through the JDeveloper wizard for example, JDeveloper automatically adds the needed jars to your project.

Some text messages not received or are empty

Some text messages not received or are empty, I have been using the Verizon app because I like it but I have also seen issues with Textra. Basically some messages have been empty but last night I sent a text to someone and it sent and delivered and the person never got it. I have wifi enabled at home which was where it happened and I do use a network extender due to the weak coverage but I have a great signal with it and voice was clear last night since I received a call, is anyone else having issues?
I am using Nova Launcher which shouldn't matter. Everything else works great and I love the phone.
Thanks

I, too, have been having many problems with not receiving text messages. I have been dealing with this crap for 6 weeks now!! I don't receive texts from various people, and it is very sporadic. It shows in their sent box, but NEVER shows up in my inbox. I have talked to about 8 different reps from VW and they keep coming up with excuses. We have tried EVERYTHING! They have even sent me a different phone and I am still having this problem. I just got off the phone (again!) with them and they are sending me ANOTHER phone. I have asked to get out of my contract with no ETF, but, of course, they won't allow that to happen. They keep telling me that I "have to work with them"!! Like I haven't given them several chances already! My job is in jeopardy because my boss texted me something; I never received it; and he was NOT happy!! He told me to "get the problem fixed"...I don't feel VW is living up to their end of the contract and I feel like I am paying a lot of money every month for an unreliable service. I am pursuing reporting this to the FCC. Needless to say, I got very angry with the last 2 people I have spoken with at VW and used some colorful language! Does anybody have any suggestions on what I can do next (before I lose my job!!)!!

Cannot extract the embedded font 'F2'. Some characters may not display or print correctly.

This question was previously published but no answer has been found.
Error message is :
"Cannot extract the embedded font 'F2'. Some characters may not display or print correctly."
Many pdf documents display this error with Adobe Reader 8.1.0. We have errors for embedded fonts 'F0','F3','F7' and so on.
It looks like a Adobe Reader bug because :
- All PDF files can be opened with Acrobat Reader 5.0.5, 6.x and 7.x, can't be opened with 8.1.0 version.
- the 8.1.1 update removes only the bug for 'F0' error message (issue #1572280).
The solution :
- to publish a 8.1.2 update to fix this important bug
- is there a registry parameter or tool option to disable the checking added in 8.x version of Adobe Reader ? The 8.x version catches more errors to be compliant with Adobe specification but Adobe reader must be
compliant with all documents generated by third party products.
This Adobe Reader bug applies to Windows Vista, XP Pro SP2, 2000.
Thx,
Regards

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

How can I re-install Imovie ? some features are not available ( world globes ,etc...)

How can I re-install Imovie 10? some features are not available ( world globes ,etc...) after the update from today

I'd suggest a fresh reinstall of iMovie then. Delete the Application and re-download from the Mac App Store. You should see something like this:

HT4009 Some games are not available

Hello;
Why Some games are not available (qatari Apps) ?

It all depends on the list of libraries/jars you specify under project properties->libraries.
When you create a Servlet through the JDeveloper wizard for example, JDeveloper automatically adds the needed jars to your project.

Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print corr

I have been getting the error....
Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print correctly.
I have tried to look online to figure this out but I have had no luck. If anyone has any suggestions to fix this I would love to hear them. Thanks!

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

How to change font size & color of text inside note and callout annotation using code ?

Hi,
I want to set different font size & color for the text inside note and callout annotations. And for this, I am setting properties using the DS attribute while creating annotations (see below code).
//"font: Helvetica,sans-serif 12.0pt;font-stretch:Normal; text-align:left; color:#rrggbb";
sprintf(buf,
"%s %2.1f%s%s%s%s;" , "font: Helvetica,sans-serif", float(g_fontSize),"pt; font-stretch:Normal; text-align:left; color:#", str[0], str[1], str[2]);CosDictPutKeyString (cosAnnot,
"DS",CosNewString (cosDoc, false, buf, strlen(buf)));PDAnnotNotifyDidChange(pdAnnot, ASAtomFromString(
"DS"), 0);
But this doesn't work when I just wrire text after creating annotation.
And suprisingly it works fine when I click first outside of the annotaion and then double click to write text inside annoatation.
Is this bug of Adobe ? if not then please let me know the fix.
Regards,
Arvind

Hi
Is there any way(eg. preference) by which we can change default color & font size for annotation?
Regards,
Arvind

Fonts used in HTML rendered components not displayed

Hi all,
I have a problem using fonts in components with text that is being rendered by the HTML renderer.
It's the exact same problem as described in this topic;
http://forum.java.sun.com/thread.jspa?forumID=257&threadID=222691
but no solution found...
When I do this, my font isn't displayed (only the default SansSerif font is used at this point);
JLabel label = new JLabel("<html>a text</html>");
InputStream fontStream = getClass().getResourceAsStream("SystemVIO.ttf");
Font font = Font.createFont(Font.TRUETYPE_FONT, fontStream);
label.setFont(font.deriveFont((float)12));SystemVIO is placed in a JAR-file (loaded in my classpath).
And when I do this, it is displayed correctly;
InputStream fontStream = getClass().getResourceAsStream("SystemVIO.ttf");
Font font = Font.createFont(Font.TRUETYPE_FONT, fontStream);
JLabel label = new JLabel("<html>a text</html>");
label.setFont(font.deriveFont((float)12));But the real problem here is, if one component is made with a HTML renderer, none of the other components can use a font if it's loaded after the FIRST component with HTML renderering is constructed.
So, for some reason, the fonts aren't reloaded in the HTML renderer (is the html renderer native?) whenever I use createFont().

Hi Sundar,
if I understand your post properly, what your are doing in your BSP is executing a procedure to create an Adobe document, and then placing that document into the HTTP response.
If you have built this code by following some of the blogs in SDN, you probably do something like...
response->set_header_field( name = 'content-type'
                            value = 'application/pdf' ).
l_pdf_len = XSTRLEN( l_pdf_xstring ).
response->set_data( data   = l_pdf_xstring
                    length = l_pdf_len ).
navigation->response_complete( ).
What this code does is change the type of the HTTP response to 'application/pdf', set the content of the HTTP repsonse to the PDF data stream, and finally signal the HTTP runtime that processing has completed.
Once processing has been completed control is returned to the HTTP runtime. This means any further 'down-stream' code in your BSP will not be executed. This includes the Layout section of your BSP.
It is not possible to send two responses, PDF data and HTML data, to a single HTTP request. If you want to show both on the same web page you need to embed the Adobe document into the HTML page using frames or some other method.
Cheers
Graham Robbo

Best way to determine optimal font size given some text in a rectangle

Hi Folks,
I have a preview panel in which I am showing some text for the current selected date using a date format.
I want to increase the size of the applied font so that it scales nicely when the panel in which it is drawn is resized.
I want to know the best way in terms of performance to achieve the target. I did some reading about AffineTransform and determining by checking ina loop which is the correct size, but it does not feel like a good way.
I would appreciate some tips.
Cheers.
Ravi

import java.awt.*;
import java.awt.font.*;
import java.awt.geom.*;
import javax.swing.*;
public class ScaledText extends JPanel {
    String text = "Sample String";
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        Font font = g2.getFont().deriveFont(16f);
        g2.setFont(font);
        FontRenderContext frc = g2.getFontRenderContext();
        int w = getWidth();
        int h = getHeight();
        float[][] data = {
            { h/8f, w/3f, h/12f }, { h/3f, w/4f, h/8f }, { h*3/4f, w/2f, h/16f }
        for(int j = 0; j < data.length; j++) {
            float y = data[j][0];
            float width = data[j][1];
            float height = data[j][2];
            float x = (w - width)/2f;
            Rectangle2D.Float r = new Rectangle2D.Float(x, y, width, height);
            g2.setPaint(Color.red);
            g2.draw(r);
            float sw = (float)font.getStringBounds(text, frc).getWidth();
            LineMetrics lm = font.getLineMetrics(text, frc);
            float sh = lm.getAscent() + lm.getDescent();
            float xScale = r.width/sw;
            float yScale = r.height/sh;
            float scale = Math.min(xScale, yScale);
            float sx = r.x + (r.width - scale*sw)/2;
            float sy = r.y + (r.height + scale*sh)/2 - scale*lm.getDescent();
            AffineTransform at = AffineTransform.getTranslateInstance(sx, sy);
            at.scale(scale, scale);
            g2.setFont(font.deriveFont(at));
            g2.setPaint(Color.blue);
            g2.drawString(text, 0, 0);
    public static void main(String[] args) {
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new ScaledText());
        f.setSize(400,400);
        f.setLocationRelativeTo(null);
        f.setVisible(true);
}

Fonts used in some text layers not available...

Similar Messages

Maybe you are looking for