Footage aspect ratio and codecs

I am usimg mixed fooatge in a project and shooting at 1080 60i with a prores 422 codec.. Was advised to edit footage and then compress once project is complete to pro res using compressor. 
I am just checking clips in DVD studio pro to see if they compress and look good.  Images are coming in lookinglike 4:3 aspect not 16.9 for a start.
Images coming out of an apple intermediated codec show good slow motion and moving shots.. Image coming from a pro res sequence compress showing bur as in 2 images fro every movement.
I have to resolve this befor eI start editing.
This all a problem because I shot in 60i as this is dance footage and need good slow mo capacity .. Usually shooy 24p.
Catherine

I'm a little confused as to your workflow.  You don't convert to prores after editing in compressor.  You can convert to prores before editing. 
Here's the best workflow in my opinion.  Export from fcp file:  export:  quicktime movie (not quicktime conversion) with current settings.
Bring that file into Compressor and apply the appropriate dvd preset.  If you're resizing which you will since you're working in 1080 in fcp and all dvd's are standard def, you may want to enable frame controls and change the resize filter to best.
Here are some tips for using compressor
https://discussions.apple.com/docs/DOC-2611
This will result in two files:  an m2v file (video) and an ac3 file (audio).  Bring these files into dvdsp and drag to a track. 
Motion comes with fcp and it did come with fcp6. 
Here's a user tip about changing speeds in fcp.  It should apply without issues to fcp6.
https://discussions.apple.com/docs/DOC-3712
Good luck.

Similar Messages

  • Pixel Aspect Ratio and ciphering type of footage-CS6

    CS6- updated 12\18\13  V-11.03
    Hi All,
    A few questions about:
    Pixel Aspect Ratio and ciphering type of footage. Bare with me as I touch on two different aspects of what I feel are related:
    1. Setting up a Comp-
    Having AE decide on the correct footage being used- Via >Import footage,.(to Folder) then drag it on, or into the 'make comp icon' where AE is supposed to do a 'best guess' for the comp settings. Be it square pix or otherwise. What are the second value in brackets ? See pic
    2. Interpolation-
    When using two diff footage sources- If using two different source footages in a comp. Is this where I should interplolate my footage to match the existing footage and the comp settings (If I have choosen NOT to pre-comp that secondary footage?)
    3. Seperating fields-
    How come footage that a camera manufacturer claims to be shooting in Progressive 30 or 24p is showing up as interlaced in my comp's CP? The manual to the cam says 30p or 24p or 60i The footage was shot at 30p (for sure)
    Here is a screen grab of AE's 'best guess' of that footage, showing it with an UPPER field render; indicative of HD Interlaced footage and then in the inerpolate settings - 'kinda confirming it.
    Now for the way out- Render:
    4. If that is in fact Interlaced and I then want to reduce the size of that 1920 footage to 66% size... Do I need to do anything in particular at this point?
    For some reason I am getting an error on my end when trying to export as an AVI and reducing size to 1280
    5. Is this from the Field render of interlaced challenge?
    I ended  up with a couple of errors and then aborted the whole file and re-imported to start over with this error. Which happend again after a redoux
    So I sent it over to Prem Pro to export those MTS Files as a movie and noted AGAIN the reference to Interlaced video. "upper and lower" Prem Pro was able to use the same MTS files and export a working movie. (so those files were not corrupt BTW) Yet Note PP's output reference to that footage again as Interlaced would be...
    Thanks for any clarity on those "5" questions... NC

    Thanks for the details Rick. 
    Thanks for the insight on  #1
    Ref #2, You should never change the interpretation of Pixel aspect ratio on footage  unless you know for a certainty that it is wrong. For example, open Photoshop or Illustrator and create a new document that is 720  X 480 pixels and AE will always interpret the image as rectangular pixels because that is a standard rectangular pixel frame size.
    Unless you specifically created the image in Photoshop with rectangular pixels it is square pixels so the interpretation must be changed to avoid distortion.
    --Did you mean to write:
    Unless you specifically created the image in Photoshop with SQUARE pixels using  a rectangle layout?  I am not trying to bust your blz here, I am trying to understand the unknown. (for me)
    So it may very well be AE mis-guessing the footage and the Upper first is a mistake on AE's part and I need to test it to find out? On that note...
    Ref#3, Separating fields must be done right. Some 1080P footage is interpreted as having fields. This may be incorrect and if there is a question you MUST test the footage. Test the footage by making sure that the fields are being separated
    How do I make sure the fields are being seperated? Does the window as in pic two from the top of my post confirm that or is there another test?
    Then I do the following:
    then selecting the footage in the project panel and choosing Create Composition from Selection, then opening the Composition settings, doubling the frame rate and stepping through the footage a frame at a time. If the footage is really interlaced then each of the frames will be different.  (IE:  29.94 to 59.94fps) OK
    If the field order is reversed then motion will be in the right direction then reverse, then go back to the right direction. ---I did not understand?  Are you referring to Upper and Lower reverse?   Direction, as in fwd and back in Time line? Sorry unlclear on my end...
    Oh and HFR footage? HFR? High frame rate??
    One last thing, Do all cameras shoot anamorphic, or could they as AE is showing my MTS files; are Square? (1.00) Pic #1
    @Dave-  You -
    At 1080, a lot of footage is interlaced, and evidently your camera made interlaced footage
    Me- How do you know? because of the 2nd pic and upper field first indication?
    You-Even if you know for a fact that it was shot 30p, the camera captures the entire frame... but it records it as two fields. They give it a fancy name: Progressive Segmented Frame. 
    Me- Is this typical false advertisement of the sales divison of brands like not telling you what CMOS or CCD is in a cam just slapping HD 1080p on the side of the box?
    You-AE will treat it as an entire frame if you interpret it as having a field order of None.
    Me- Won't that be a problem mis leading AE on an interpret?
    Thanks Gents for the precise details.
    Best
    NC

  • Aspect Ratio and Pixel Aspect Ratio

    I am importing P2 footage and wondering what my sequence settings should be? As in Aspect Ratio and Pixel Aspect Ratio would need to be? Do I need to ask the DOP what settings on the P2 have been used when filming?

    If you have FCP 6 then when you drop a clip into the timeline it will ask you if you want to configure the sequence to match...just click YES.
    But you should know what format they shot. Find that out then choose the Easy Setup that matches, and make a new sequence. Or let FCP 6 and 7 do that for you, like I mentioned.
    Shane

  • Cropping in PS while Maintaining Aspect Ratio and DPI

    I shoot the Nikon D3, RAW (.NEF) and convert through ACR. Through ACR, the DPI is set to 300 DPI; the DPI caries over to Photoshop.
    I crop in Photoshop using the crop tool (not marquee). To maintain 2:3 or 3:2 aspect ratios, the crop tool requires the width and height in inches or pixels. If specifying resolution, the document size will crop to that DPI, if not; the DPI is derived from pixel dimensions.
    In my case, I’ve been cropping at 2in by 3in (or reverse for orientation). The resulting “real” image pixel dimensions are still very high (correct to crop size) but the document size reported in PS is 2in by 3in with a wildly high DPI. By changing the resolution back to 300 DPI through Photoshop, the document size returns to normal. Therefore the picture has not lost anything; it appears to only be a function of the Meta data. The pixel dimensions remain constant while the document size and DPI change.
    It apears that you canot specify an aspect ratio via the crop tool without defining it in inches or cm. You can do it with the marquee tool but the marquee tool sucks for cropping. You can however crop in ACR with the crop tool by merely specifying the aspect ratio (not in inches or cm). In summary, the PS crop tool is based in inches or cm while the ACR crop tool is simply aspect ratio.
    What I can do to crop in PS while maintaining aspect ratio and defined DPI. Is there a work-around, magic trick, or something else I can do to fool the PS crop tool into an aspect ratio not based in inches or cm?

    Just to summarize:
    Setting a dimensioned ratio (e.g., 2 in by 3 in for Width and Height) in the Crop tool without filling in a Resolution value yields a crop with the desired aspect ratio, and without any resampling.
    There is no way to specify a ratio with the crop tool, specifically, as the OP has requested, though in a future version perhaps specifying simple numbers there without any units might be a way Adobe could facilitate this.  It would be a nice addition and with little downside.
    I guess what I don't understand, though, is why the OP cares about the "high" resulting dpi value?  It's just a number.
    Expanding on this, the Resolution is nothing but a metadata value that can be changed at will (e.g., through Image - Image Size... - uncheck Resample) at any time in the future.  There is ALWAYS a Resolution value associated with the image, both before and after the crop (though the crop tool may end up changing it; so what?).  In short, the Resolution is just an arbitrary figure until such time as the user wants to use the image for a purpose (e.g. printing).
    Always think in terms of pixel dimensions (number of pixels horizontally and vertically) while editing, then think about dpi right before publishing.  It's hard to go wrong this way.
    -Noel

  • How do I control aspect ratio and pixel dimension in iMovie 10

    When you created a new movie in iMovie 9 the program would ask if you wanted 4:3 or 16:9 aspect ratio and when you saved the movie it would ask about the size of the file and pixel dimensions.  How do I controll these in iMovie 10?

    I think they screwed up - but I have solved the problem by deleting it and reinstalling version 9.0.9 which you can get from the support at http://www.apple.com/uk/support/mac-apps/imovie/
    Frankly I don't see the point of Theatre and I don't use iCloud so reverting back to a version that actually works seemed a good option!

  • What is the aspect ratio and fps for video in Connect 9?

    I'm trying to find any definitive details on the aspect ratio and fps supported by Connect 9.  It is well documented for 8 that it was 640x480 at 20 fps.  Is that the same for 9?  Or has that improved?

    The supported resolution and frame rates for video in the Video pod have not changed with Connect 9.

  • What is aspect ratio and how can you change it?

    Please refer to my other post for more information on these photos. The photos I am referring to are the ones that appear blank in the edit screen.
    When I try to export these photos to facebook using the exporter, it says that IPhoto can only deal with photos with an aspect ratio of 3:1 or lower, and that the photos selected have a greater aspect ratio. What is aspect ratio and if possible, how do you change it? This may be directly linked to my other problem with the same pics.

    I'm having the same trouble. Zapplications will upload only 1920x1920 photos. With iPhoto I can't get past the automatic ratio of 1920x1440!!! There MUST be some way to customize photo size on iPhoto!! Please help!! I've tried cropping the photo to a square and still can't get past this ratio thing.

  • Captivate videos - aspect ratio and skin

    1. When I import video into captivate, it correctly keeps the same width and height of the source video IF I do not use the haloSkin. If I use the haloSkin (which is always visible and creates a frame around the video), the video itself shrinks to put the skin around it, but it also loses its aspect ratio and becomes squished vertically. There's no easy way to adjust the video so it uses the proper aspect ratio or even width and height without manually eyeballing it. Am I missing something?
    2. Are the video skins customizable? If I wanted to do something simple like change the haloSkin to be colored black instead of white, is that possible?
    Thanks,
    Keith

    1) The haloSkin subtracts 20 px from the width and 50 px from the height of event videos, which is not only counter-intuitive but obnoxious because it does indeed mess up the aspect ratio of your video as you noted. So a 640x480 video object with the skin applied has a video area of 620x430. Fortunately the 20 and 50 are absolute, and don't change with the size of the video object. This means that you can just add 20 to the width and 50 to the height of the video object to get your video back to the correct size. (a video object with dimensions 660x530 and the haloSkin applied has a video area of 640x480)
    2) I'm unaware of any way to edit the skins.

  • Aspect ratio and render line issue

    When I overwrite the video from the source (top left) window to the timeline, it is changing the aspect ratio and a red 'render' line is appearing on the time line.
    The video is now zoomed in and pixelated.
    I have not had this issue while editing with my other files and the settings seem to be correct. Am I missing something super obvious?

    The PPro tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5
    Look for the NEW ITEM information on page 5

  • How to edit footage in the same sequence from two different cameras:  1) Standard Def 4:3 aspect ratio, and 2) Standard Def shot 16:9, anamorphic?

    What can I say.  We blew the shoot.  His high-end Sony camera - std def at 4:3 aspect ratio.
    My camera - the little Panasonic DVX100, set to anamorphic, so 16:9 aspect ratio.
    I have to edit this footage together in the same sequence.  Obviously, I'm getting prompts to change the sequence settings every time I try to move footage onto the timeline.
    Alternatively, would someone just thunk me in the head. 
    I'm sad about this.  I can't believe it happened.

    What is the ouput - standard 4:3 DV?
    If so, put a clip of the 4:3 material into a timeline and accept the offer to conform the timeline to that material. Then, any of the 16:9 material will be part of that settings - however - you will want to go into the DISTORT settings in the Viewer to alter the material so that the image extends beyond the sides (aka a center cut). It has been a long time since I've done this but I remember the number is something like 33 (or -33).
    x

  • Maintaining Aspect Ratio and Quality

    Hello FCE Guru's!
    Yesterday while editing I noticed that my footage in FCE that I shot on a canon 7d was not as clear as the raw footage. When I adjusted my settings in FCE using the sequence settings tab, my project became smaller and seemed to regain its clarity.
    But the problem is when I import any footage that wasn't already in the project the aspect ratio is bigger than what was in my project prior to adjusting the sequence settings? Even when I try and re-adjust the sequence settings the video stays small while new clips that I import are a lot larger????
    So basically I have footage that is smaller than other footage, How do I keep all my footage the same size throughout the entire project?
    I would like to know how I can fix this issue and what I did wrong to avoid in the future. I really hope this is something that is fixable as my project is 90% complete and the client is looking for a finished product by Friday. Please Help!
    Thanks in advance.

    Sorry,
    Here is everything:
    The footage that is in my timeline and saved to my project is: 1920x1080
    *My Easy Setup settings are setup as*: AVCHD Apple Intermediate Codec 1920x1080i60 Format (all Format) Rates (all Rates)
    *My sequence settings are setup as*: Apple Intermediate Codec 1920x1080i60
    *The footage That I shot and trying to import reads exactl*y: 1920x1080 Apple Intermediate Codec, Integer (Big Endian)
    *The issue is*: The Footage that I have in my timeline as well as in my project already seems to be a smaller than the footage that I am attempting to import into my project. The footage I want to import is Full Frame While the footage I already had in my project is smaller in my viewer.
    Please let me know if you need any further information,
    Thank You.

  • Confused about pixel aspect ratio and video size

    Hello,
    I have edited a whole dvd full of video and exported it as MPEG-2  NTSC DV Wide - it says 720 x 480, 29.97 fps. I have brought these into Encore and am trying to make a menu but can't seem to get the menu size right. Since I chose the wide format when making the video, which aspect ratio should I use in Encore? It gives me a choice in the properties menu, but when I go to Project settings it says Codec: MPEG-2 Dimensions 720 x 480. Whenever I bring in a menu background from photoshop, it doesn't fit, and is further complicated by the pixel aspect ratio thing. I have no idea what my background size should be to make it fit properly - the templates seem to all be the 4:3 size. What size should I be using in Photoshop and which pixel aspect ratio?
    Is my video codec going to cause me a problem in Encore? I assumed that most tvs nowadays are widescreen (at least not square), so I should do the video wide as well.
    Thanks for any help! I am thoroughly confused.

    Use a template menu from Encore's library. Then modify as you need. That way you know that it will be the right pixel size and par. You cannot made an incorrectly sized/par'd menu work by setting it to 16:9 or 4:3 in the menu properties. It must be correct, and if so, Encore will usually pick the correct setting.
    The Encore project settings for DVD really have no choices: it has to be  720x480 for NTSC. There is no project setting for par. You have to create the menu correctly - just let Encore do that for you by using a template.
    Was your video source widescreen? If so, then you'll be fine on your video. If not, you may need to sort that out also.

  • Help with aspect ratio and resolution nightmare

    I am currently working on a documentary and all the footage I was given are in different formats an resolutions. Some are in 720 x 480 others in much larger aspect ratios. Some are standard SD some are HD
    is there any way to conform all of these together, or any tips? what about exporting? any help would be appreciated.
    thanks

    What's your final delivery format?
    What I do, and I usually have some HDV to mix with DV is to put everything on a ProRes 422 sequence with the setting to the highest resolution I have to start with (usually HDV 1440x1080) but I don't let FCP automatically change the time line or covert anything until I do a render. Then I finally do a render all and FCP up rezzes stuff when it renders. I use very little of the DV stuff (it's a backup when I need something that the HDV cams didn't video the way I need, such as both HDV cams moving to a point of view at the same time).
    If you don't need to intercut the various pieces (that is, if you can edit each one as an individual piece in its owns sequence, then just stitch them together end to end at the end), then I create each one in its own sequence, and let FCP change the sequence settings when I drop the video into it. Then I stitch it together when I get ready to make the DVD.
    My DVD's are all SD, so I use compressor to downrez and compress: then they are all in the same resolution, etc. and I stitch it together in DVD SP as stories, or just drop them into the same video line, end to end.
    Eddie O

  • HDV Aspect Ratio and Exporting For the Web

    INTRODUCTION
    I am trying to export an HDV video for the first time and have managed to confuse myself. I want to upload it to blip.tv and they transcoded videos into Flash with 4:3 aspect ratio. But more than that, I want to understand how this all works so I don't have to guess about the settings that will give me what I want.
    BACKGROUND DATA
    4/3 is 1.333...
    16/9 is 1.777...
    1440/1080 is 1.333... (if the pixels are square)
    1920/1080 is 1.777... (if the pixels are square)
    In FCP my clip format says:
    Frame Size: 1440 x 1080
    Pixel Aspect: HD (1440 x 1080) (Does this mean the pixels are 1.333... times wider than it is high?)
    EXPORT USING QUICKTIME CONVERSION
    When I go to export this clip using Quicktime Conversion under the Options... Size... dialog and look at the Dimensions dropdown, (I assume this is the dimensions of the exported video. Is that correct?)
    Some of the settings are (the settings are in quotes, my notes are in parentheses.):
    "HD 1440 x 1080 16:9" (if pixels are square this is 4/3)
    "HD 1920 X 1080 16:9" (if pixels are square this is 16/9)
    So both of these settings claim to be 16:9 but they both can't be true unless they have different pixel aspect ratios (which I find hard to believe). This makes me think I don't really know what they mean when they notate something as 16:9. Can anyone give a definition that will help me here?
    EXPORTING FOR THE WEB
    Using FCS2, what settings should I use to export this clip undistorted for the web (with letterbox if needed)?
    Thanks for the help,
    Rob:-]

    What I find with HDV 16x9 1440x1080 footage, is that when you output for the web you have to hard code the size you want the result to be. 320x180 or 640x360 for example scale things nicely. If you want bigger, just do the math.
    I don't know why but whenever I select a predefined output size, it always screws it up (I don't work with 4:3 ever, so I'm speaking only of 16x9). So I always enter the size I want.
    And as far as Compressor 3, I really can't get that to set the size I want correctly either. Mostly its due to me being lazy and not wanting to spend a year reading the Compressor manual. A package that should basically have the easiest interface known to man is now so complicated that unless I have to hand-holding tutorial, or get to drag/drop one of their presets, I end up screwing things up with it. Not to mention that you get to wait for hours just to see how you screwed up the settings of your output.

  • Aspect ratio and exporting help, PLEASE!

    I've been given a project that was shot on DVCPro HD tapes. The footage was already loaded onto a drive for me. When I bring the clips into FCP, they are 1920x1080 and appear squished in the viewer and canvas. If I click "anamorphic" in the sequence settings, the footage no longer looks stretched.
    Great. Now, I need to export the footage to QTs that are a random 620x349, and the client doesn't want the images letterboxed or with bars on the side... they'd prefer that I just crop the images to that aspect ratio. It's for the web.
    How can I do this? Everytime I export, I'm getting bars on the sides or a squished image. Thanks for your advice!

    That's DEFINITELY not DVCPro HD settings are you SURE they match the clips? AND 1920x1080 is NOT anamorphic.
    Also, how are you getting letterbox? Your sequence settings are 16:9 - not letterboxed.
    Patrick

Maybe you are looking for